客服
4 端口一体式无线连接测试系统，400MHz 至 7300MHz、200MHz 中频带宽，覆盖 Wi-Fi 7、蓝牙 5.x 与 LPWAN
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
类似产品
Wi-Fi 6E 2×2蓝牙5.2；Zigbee3.0/Thread1.4.04个SMA；PoE供电；WebUI+REST API
Wi-Fi 6E 2×2蓝牙5.2；4/5/6GHz20至160MHzPoE供电；WebUI+REST API
宽带 2.4 GHz 信号分析仪和发生器核心的 moreph SDR 支持 2 秒的展位时间、全带宽、高动态范围发射器和接收器可以在整个 2.4GHz ISM 频段上同时进行 RX/TX集成的 CW 信号发生器频率范围为 25MHz 至 6GHz确保您不需要任何其他测试设备！使用我们的任何测试和测量选项升级 moreph30
同厂商产品
16 端口、400MHz 至 7300MHz 的 Wi-Fi 6E 测试系统，每端口原生支持 160MHz 与 80+80，兼顾蜂窝非信令测试
面向 Wi-Fi 5/6 的多设备测试系统，400MHz 至 6GHz、160MHz 原生带宽、2/8/16 端口，真 MIMO 可扩至 8×8
8 端口多 DUT 无线连接测试系统，860MHz 至 6GHz、120MHz 中频带宽，较单设备系统吞吐提升 500% 以上
- «
- 1
- »
IQxel-M4W 400MHz至7300MHz 4端口Wi-Fi 7与蓝牙测试系统|LitePoint (在产)
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
LitePoint
IQxel-M4W 无线连接与物联网测试系统
400MHz至7300MHz · 4 个射频端口 · 200MHz 中频带宽 · Wi-Fi 7 与蓝牙 5.x
产品简介
IQxel-M4W 是 IQxel 系列里最常见的一档：4 个射频端口、200MHz 中频带宽，一台 2U 机箱把信号生成、分析和射频前端全装进去。
它面向的是无线连接产品的射频测试——从 Wi-Fi 7 到蓝牙 5.x、Zigbee/Thread、Z-Wave、LoRa、Sigfox，全部走同一套硬件。
选它还是选更高一档的 IQxel-MX，判断点很直接：要不要 320MHz 带宽做 802.11be 的宽信道测试。
M4W 的 200MHz 中频带宽足够跑 160MHz 信道与 80+80，价格和体积都低一档；
产线上要同时挂多台设备，它有 4 端口直连与多 DUT 并行。
一体式无线连接与物联网测试系统，覆盖 Wi-Fi 7、蓝牙 5.x、Zigbee 与 LPWAN。
核心参数
• 频率范围：400MHz至6000MHz（6GHz 机型）／400MHz至7300MHz（7GHz 机型）
• 射频端口：4 个（N 型阴头）
• 中频带宽：200MHz
• 最大输入功率：+34dBm 平均 / +36dBm 峰值
• 输入功率精度：±0.5dB（400MHz 至 3.8GHz，电平 > -40dBm）
• 形态：2U 机箱，可上标准 19 英寸机架
功能特性
• 2U 机箱装下全套射频前端：信号生成、分析、处理都在同一台机箱里，测试台上不用再摆本振、变频和开关。
• 400MHz 至 7300MHz 连续覆盖
6GHz 机型到 6GHz，7GHz 机型到 7.3GHz；
6GHz 频段（Wi-Fi 6E/7）不需外接变频。
• 200MHz 中频带宽：覆盖 160MHz 信道与 80+80 载波聚合，802.11ax/ac 的主流带宽场景一次采完。
• 四台设备并行测试：全集成信号生成与分析架构支持最多 4 台待测物并行，配合嵌入式智能调度提升吞吐。
• 覆盖 Wi-Fi 7 到 LPWAN：802.11be/ax/ac 与全部传统 Wi-Fi，加蓝牙 1.0–5.x、Zigbee、Thread、Z-Wave、LoRa、Sigfox。
• 低噪声与低杂散：噪声系数 ≤25dB（6GHz 以下），无信号时固有杂散 ≤-80dBm，弱信号测试有底。
• IQfact+ 芯片组库：数百个主流无线芯片组的现成测试方案，换芯片不用重写流程。
• 夹具友好：测试仪到夹具直连、自动配置与简单夹具校准，省机柜空间也省调试时间。
应用场景
• 无线连接产品研发与 DVT：Wi-Fi、蓝牙、Zigbee 多制式在同一台仪器上做射频验证。
• 物联网终端产线：LoRa、Sigfox、Z-Wave 这类低功耗制式的校准与综测。
• 手机与平板射频测试：Wi-Fi/蓝牙并发场景与多天线验证。
• 模组厂多客户混线：IQfact+ 芯片组库缩短换线调试时间。
• Wi-Fi 6E/7 预验证：6GHz 频段与 160MHz 信道，覆盖主流高阶调制场景。
• 代工与合约制造：4 端口并行提升单站产出，减少测试台数量。
资源下载
以上内容与指标均取自LitePoint（莱特波特）（LitePoint）官网该产品详情页与官方产品资料，未标注口径的为厂家公布值。
LitePoint · onetest 仪器资源库
LitePoint
IQxel-M4W 无线连接与物联网测试系统 详细指标
400MHz至7300MHz · 4 个射频端口 · 200MHz 中频带宽 · Wi-Fi 7 与蓝牙 5.x
详细指标
指标取自 LitePoint 官方技术规格书与产品页；未列出的项目表示官方资料未给出，本站不作推测。
端口说明
• Power Switch：Power On/Off ｜ Pushbutton Switch
• RF1A：RF input/output ｜ N female
• RF2A：RF input/output ｜ N female
• RF3A：RF input/output ｜ N female
• RF4A：RF input/output ｜ N female
• Power Indicator：LED green – powered up, running LED orange – powered up, standby ｜ LED indicator
• Session Indicator：LED green – remote session active LED red – remote session lock ｜ LED indicator
• Status Indicator：LED green – no faults/errors detected LED orange – software error detected LED red – hardware fault detected ｜ LED Indicator
• RF port 1 indicator：LED green – ports RF1 A is in one of the following status: OFF/IN IN/OFF IN/IN LED orange – ports RF1 A is in one of the following status: OUT/IN IN/OUT LED red – ports RF1 A is in one of the following status: OFF/OUT OUT/OFF OUT/OUT ｜ LED indicator
• RF port 2 indicator：LED green – ports RF2 A is in one of the following status: OFF/IN IN/OFF IN/IN LED orange – ports RF2 A is in one of the following status: OUT/IN IN/OUT LED red – ports RF2 A is in one of the following status: OFF/OUT OUT/OFF OUT/OUT ｜ LED indicator
• RF port 3 indicator：LED green – ports RF3 A is in one of the following status: OFF/IN IN/OFF IN/IN LED orange – ports RF3 A is in one of the following status: OUT/IN IN/OUT LED red – ports RF3 A is in one of the following status: OFF/OUT OUT/OFF OUT/OUT ｜ LED indicator
• RF port 4 indicator：LED green – ports RF4 A is in one of the following status: OFF/IN IN/OFF IN/IN LED orange – ports RF4 A is in one of the following status: OUT/IN IN/OUT LED red – ports RF4 A is in one of the following status: OFF/OUT OUT/OFF OUT/OUT ｜ LED indicator
• USB (2 ports)：USB 2.0 compatible connection to external controller ｜ USB Type A
• 10 MHz ref input：10 MHz reference input ｜ BNC female
• 10 MHz ref output：10 MHz reference output ｜ BNC female
• Marker out / trigger in 1：TTL compatible ｜ BNC female
• Marker out / trigger in 2：TTL compatible ｜ BNC female
• Marker out / trigger in 3：TTL compatible ｜ BNC female
• Marker out / trigger in 4：TTL compatible ｜ BNC female
• AC in：AC power input ｜ 100 to 240 VAC (automatically switched) 50 to 60 Hz, Includes hard power switch
• DVI port：Display ｜ DVI-D
• VGA port：Display ｜ VGA-15 pin
• Communication I/O LAN：1000 Base-T LAN ｜ RJ-45
• GPIO：General purpose input/output ｜ 50-pin connector
通用硬件规格
• Frequency Range（RF1 to RF4）：400 to 6000 MHz (TDD) (6 GHz test system) 400 to 7300 MHz (TDD) (7 GHz test system) 400 to 3800 MHz (FDD)
• IF Bandwidth（RF1 to RF4）：200 MHz
• Input Power（RF1 to RF4）：+34 dBm (average) +36 dBm (peak)
• Input Power Accuracy（RF1 to RF4）：Specification for Input > -40 dBm: ± 0.5 dB (400 MHz – 3800 MHz) ± 1 dB (3800 MHz – 6000 MHz) Typical: ± 0.4 dB (400 MHz – 3800 MHz) ± 0.5 dB (3800 MHz – 6000 MHz)
• Input return loss（RF1 to RF4）：17 dB (400 to 3800 MHz), typical 14 dB (3800 to 6000 MHz), typical
• Spurious (signal applied)（RF1 to RF4）：< -52 dBc (CW, for signal levels greater than -20 dBm)
• Spectral Flatness（RF1 to RF4）：Specification: ≤ ± 1 dB (± 100 MHz) Typical: ± 0.50 dB (± 100 MHz)
• Inherent spurious floor (no signal)（RF1 to RF4）：RF1 to RF4 ≤ -80 dBm
• Noise Figure（RF1 to RF4）：at minimum input attenuation ≤ 25 dB (< 6000 MHz)
• Integrated Phase Noise（RF1 to RF4）：≤ 0.3 degrees (100 Hz to 1 MHz) 0.2 degrees (100 Hz to 1 MHz), typical
• Signal to Noise Ratio（RF1 to RF4）：≥ 55 dB 100 kHz RBW
• Sample data rates：10, 20, 30.72, 40, 80, 160, 240 MHz
• Waveform Capture Duration：at 10 MHz sampling data rate: 9600 ms at 20 MHz sampling data rate: 4800 ms at 30.72 MHz sampling data rate: 3125 ms at 40 MHz sampling data rate: 2400 ms at 80 MHz sampling data rate: 1200 ms at 160 MHz sampling data rate: 600 ms at 240 MHz sampling data rate: 400 ms
• Absolute minimum value：Wideband RF ｜ -40 dBm
• Absolute maximum value：Limited by the maximum input power
• Edge trigger relative threshold：Up to -40 dB below RLEV
• 电平精度：± 2 dB
• Output Power Range (CW)（RF1 to RF4）：1 port active: +5 to -130 dBm All ports active: 0 to -130 dBm
• Output Power Range (CW) (VSG1 + VSG2 through internal combiner)：1 port active: -5 to -130 dBm All ports active: -10 to -130 dBm
• Output Power Accuracy：RF1 to RF4 (1 port active) ｜ Specifications and [Typical]: ± 0.5 dB @ levels ≥ -50 dBm (400 MHz to 3800 MHz) ± 1 dB [0.7 dB] @ levels ≥ -50 dBm (3800 MHz to 6000 MHz) ± 0.75 dB @ -100 to < -50 dBm (400 MHz to 3800 MHz) ± 1 dB @ -100 to < -50 dBm (3800 MHz to 6000 MHz)
• Output return loss（RF1 to RF4）：17 dB, 400 to 3800 MHz, typical 14 dB, 3800 to 6000 MHz, typical
• Spurious (in channel)（RF1 to RF4）：Specification: ｜ ≤ -40 dBc (200 MHz, >-55 dBm) (CW)
• Spurious (out of channel)（RF1 to RF4）：Out-of-band (> ± 100 MHz from carrier) (CW, excluding harmonic distortions) ｜ ≤ -40 dBc (<6000 MHz)
• Spectral Flatness（RF1 to RF4）：Specification: ｜ ± 1 dB ( ± 100 MHz)
• Integrated Phase Noise (TDD Mode)：≤ 0.3 degrees (100 Hz to 1 MHz )
• Integrated Phase Noise (FDD Mode)：≤ 0.4 degrees (100 Hz to 1 MHz )
• Signal to Noise Ratio：Specification: ｜ ≥ 60 dB (100 KHz signal BW), power level -40 dBm
• Carrier leakage：≤ -40 dBc (CW output) for Power > -50 dBm
• Gap power：≤ -90 dBm/100 kHz
• 采样数据率：10, 20, 30.72, 40, 80, 160, 240 MHz
• Waveform Playback Duration：at 10 MHz sampling data rate: 9600 ms at 20 MHz sampling data rate: 4800 ms at 30.72 MHz sampling data rate: 3125 ms at 40 MHz sampling data rate: 2400 ms at 80 MHz sampling data rate: 1200 ms at 160 MHz sampling data rate: 600 ms at 240 MHz sampling data rate: 400 ms
• Oscillator type：OCXO
• 频率：10 MHz
• Initial accuracy (25°C, after 60 minute warm-up)：< +/- 0.05 ppm
• Maximum aging：< +/- 0.1 ppm per year
• Temperature stability：< +/-0.05 ppm over 0°C to 50°C range, referenced to 25°C
• 预热时间（to within ±0.1ppm at 25°C）：30 minutes
• Max Frequency Variation：0.5 ppm
• Input Voltage Range：0.3 Vpp to 4.0 Vpp
• 阻抗：200 Ω
• 输出电压：> 0.8 Vpp
• 阻抗：50 Ω
• 阻抗：5 kΩ nominal
• Trigger1/2/3/4 Input Level：3.5 V – V(IH) 1.5 V – V(IL)
• Trigger1/2/3/4 Output Level：3.8 V to 4.9 V - V(OH) 0.1 V to 0.55 V - V(OL)
测量规格
• EVM：EVM averaged over payload based on standard requirements (Typical) ｜ Residual loopback EVM1: ≤ -51 dB (+20 to -20 dBm, full packet channel estimation) ≤ -48 dB (+20 to -20 dBm, preamble only channel estimation) 2.4 GHz frequency band 802.11ax waveform, 40 MHz, MCS 11, low distortion mode power levels from -5 to +20 dBm measured with an external amplifier ≤ -51 dB (+20 to -18 dBm, full packet channel estimation) ≤ -48 dB (+20 to -18 dBm, preamble only channel estimation) 5 GHz frequency band 802.11ax waveform, 80 MHz, MCS 11 low distortion mode power levels from -8 to +20 dBm measured with an external amplifier
• Peak power：Peak power over all symbols (dBm) ｜ VSA power accuracy: ± 0.5 dB (400 MHz – 3800 MHz) ± 1 dB (3800 MHz – 6000 MHz)
• RMS power：All: average power of complete data capture (dBm)
• Max avg power：Peak value of the amplitude as a moving average over 40 samples (dBm)
• I/Q amplitude error：I/Q amplitude imbalance (%) and approximate contribution to EVM (dB)
• I/Q phase error：I/Q phase imbalance (degrees) and approximate contribution to EVM (dB)
• 频率误差：Carrier frequency error (kHz) ｜ VSA measurement error: ≤ ± 0.2 ppm calibrated
• RMS phase noise：Integrated phase noise (degrees) ｜ VSA integrated phase noise: < 0.3 degrees (100 Hz to 1 MHz)
• PSD：Power spectral density (dBm/RBW per 100kHz)
• Spectral mask：Transmit spectrum mask
• 频谱平坦度：Reflects variation of signal energy as a function of OFDM subcarrier number ｜ VSA flatness over 160 MHz BW: ± 1 dB
• Power on / power down ramp：On: relative power level (% of average) versus time (CCK signals only) Power-on time from 10% to 90% Power-on time from 90% power level to start of packet (Not provided for OFDM signals) Off: relative power level (% of average) versus time (CCK signals only) Power-off time from 90% to 10% Power-off time from 90% power level to end of packet (Not provided for OFDM signals)
• Eye diagram：I and Q channels versus time (DSSS signals only)
• PSDU data：Recovered binary data sequence, including the MAC header and Frame Check Sequence, if present
• Raw capture data：I and Q signals versus time
• General waveform analysis：DC offset, RMS level, minimum/ maximum amplitude, peak-to-peak amplitude, RMS I- and Q-channel levels
802.11ax (Wi-Fi 6) Waveform Generation
• PPDU format：HE-SU, HE-MU, HE-EXT-SU (extended range), HE-TRIG (trigger based)
• 带宽：20 MHz, 40 MHz, 80 MHz, 160 MHz, 80 + 80 MHz
• 调制：BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM, 4096-QAM
• OFDMA：HE-MU (Downlink), HE-TRIG PPDU (Uplink)
• HE PPDU configuration：HE-LTF, GI time, SIG-A, SIG-B
• DCM (Dual Carrier Modulation)：On, Off
• Coding type：LDPC, BCC
• HE-MU PPDU configuration：Per RU configuration: Station ID, size, user number, index, segment, power boost factor, MCS index, spatial mapping
802.11ax (Wi-Fi 6) Waveform Analysis
• PPDU format：HE-SU, HE-MU, HE-EXT-SU (extended range), HE-TRIG (trigger based)
• TX Quality Info：PSDU analysis and decode including HE-LTF, GI time, SIG-A, SIG-B and CRC, user number, RU index, size, MCS index
• Downlink OFDMA analysis：Per User/RU composite and individual EVM and Power results
• Uplink HE-TRIG PPDU analysis：Per User/RU composite and individual EVM and Power results including EVM of unoccupied tones
• Trigger Frame analysis：Decode of common info fields and user info fields
• Trigger Based Test：Dual ended test designed to verify STA and AP compliance for HE-TRIG PPDU: Downlink transmission of Trigger frame with configurable index, RU allocation, MCS index, target RSSI Uplink analysis of STA Carrier Frequency Offset (CFO) in the HE-TRIG PPDU per user/RU Uplink analysis of time offset between the trigger frame and the STA HE-TRIG PPDU per user/RU
802.11az Waveform Generation and Analysis (Compliant Draft 1.5)
• HE Ranging NDP：HE SU and HE MU sounding NDP PPDU, HE SU and HE MU secure* sounding NDP PPDU
• HE TB Ranging NDP：HE SU and HE MU sounding NDP PPDU, HE SU and HE MU secure* sounding NDP PPDU
802.11ba Wake Up Radio Waveform Generation and Analysis (compliant to standard draft 7.0)
• WUR Basic PPDU：WUR Basic PPDU 20 MHz, LDR, HDR
• Transmitter Tests：Phase and Symbol clock error LO leakage Transmit On and Off Symbols power ratio (sync and data fields) Correlation test (sync and data fields) Spectral flatness (average, low limit, high limit)
• Receiver Tests：CRC state Symbol Clock error Phase and amplitude imbalance
Bluetooth ® (1.0, 2.0, 2.1, 3.0) 测量规格
• TX output power：Transmit DUT output power (dBm)
• TX output spectrum：Transmit DUT power spectral density
• 20 dB bandwidth：Bandwidth between the ± 20 dB down points of the modulation waveform
• In-band emissions (Adjacent channel)：Spurious emission measured at ± 5 MHz of DUT TX frequency only
• 调制特性：Average and peak frequency deviation (Hz)
• Carrier frequency tolerance：Carrier frequency offset (Hz)
• Carrier frequency drift：Carrier frequency change over the Bluetooth burst (Hz)
• Relative transmit power (EDR)：Average power of complete data capture (dBm)
• Carrier frequency stability (EDR)：Frequency drift over the Bluetooth EDR burst duration (Hz)
• Receive sensitivity1：Receive sensitivity test using LitePoint or user-generated waveforms. Includes Dirty Packets.
• 最大输入信号电平：Assuming single-ended BER measurement
• RMS EVM (EDR)：RMS EVM for Bluetooth EDR
• Peak EVM (EDR)：Peak EVM for Bluetooth EDR
Bluetooth ® (4.0, 4.1, 4.2) 测量规格
• In-band emissions at NOC1：Spurious emission measured at ±5 MHz of DUT TX frequency only
• 调制特性：Average and peak frequency deviation (Hz)
• Carrier frequency offset and drift at NOC1：Carrier frequency offset (Hz) and change over the Bluetooth burst (Hz)
• Receiver sensitivity at NOC1,2：Receive sensitivity test using LitePoint or user-generated waveforms
• 最大输入信号电平：Assuming single-ended BER measurement
• PER report integrity：Verifies the DUT PER report mechanism
Bluetooth ® (5.0, 5.1, 5.2 1 ) 测量规格
• In-band emissions：Spurious emission measured at ± 5 MHz of DUT TX frequency only. Tested at 1 Mbps, 2 Mbps
• 调制特性：Average and peak frequency deviation (Hz). Tested at 1 Mbps, 2 Mbps, 125 kbps
• Carrier Frequency offset and drift：Carrier frequency offset (Hz) and change over the Bluetooth burst (Hz). Tested at 1 Mbps, 2 Mbps, 125 kbps
• Stable Modulation Characteristics：Tested at 1 Mbps, 2 Mbps
• Receiver Sensitivity – Stable Modulation Index：Tested at 1 Mbps, 2 Mbps, 500 kbps, 125 kbps
• 最大输入信号电平：Assuming single-ended BER measurement. Tested at 1 Mbps, 2 Mbps
• Maximum Input signal level – Stable Modulation Index：Tested at 1 Mbps, 2 Mbps
• C/I and Receiver Selectivity Performance：Tested at 1 Mbps, 2 Mbps, 500 kbps, 125 kbps
• Blocking Performance：Tested at 1 Mbps, 2 Mbps
• Intermodulation Performance：Tested at 1 Mbps, 2 Mbps
• PER Report Integrity：Verifies the DUT PER report mechanism. Tested at 1 Mbps, 2 Mbps, 500 kbps, 125 kbps
Bluetooth ® 5.1 测量规格
• Output Power, with Constant Tone Extension：Verifies maximum peak and average power emitted when transmitting with a Constant Tone Extension.
• Carrier Frequency offset and drift, with Constant Tone Extension：Verifies carrier frequency offset and carrier drift of the transmitted Constant Tone Extension portion in a transmitted signal with a Constant Tone Extension. Tested at 1 Mbps, 2 Mbps.
• IQ Samples Coherency, AoD Receiver：Verifies relative phase values derived from the I/Q values sampled at AoD Receiver from a Constant Tone Extension. Tested at 1 Mbps, 2 Mbps, 1 µs Slot, 2 µs Slot.
• IQ Samples Coherency, AoA Receiver1：Verifies relative phase values derived from the I/Q values sampled at AoD Receiver from a Constant Tone Extension. Tested at 1 Mbps, 2 Mbps, 2 µs Slot.
• IQ Samples Dynamic Range, AoD Receiver：Verifies the I/Q values sampled at AoD Receiver when varying the dynamic range of the Constant Tone Extension. Tested at 1 Mbps, 2 Mbps, 1 µs Slot, 2 µs Slot.
• IQ Samples Dynamic Range, AoA Receiver1：Verifies the I/Q values sampled at AoA Receiver when varying the dynamic range of the Constant Tone Extension. Tested at 1 Mbps, 2 Mbps, 2 µs Slot.
• Transmit Power Stability, AoD Transmitter1：Verifies that AoD transmit signal has settled and remains stable within the reference period and transmit slots. Tested at 1 Mbps, 2 Mbps, 1 μs Slot, 2 μs Slot.
• Antenna Switching Integrity, AoD Transmitter2：Verifies that the antenna switching occurs during the switching slots of the Constant Tone Extension.
ZigBee (802.15.4), Z-wave (ITU-T G.9959), Wi-SUN (MR-FSK IEEE 802.15.4g)
• 输出功率：Transmit DUT output power (dBm)
• Power spectral density：Transmit DUT power spectral density
• Center Frequency Tolerance：Tx center frequency tolerance
• EVM：Offset: compensate the I and Q offset in OQPSK Normal: no compensation applied
• Other modulation quality measurements：LO leakage, clock error, phase error, symbol clock error
• CCDF（complementary cumulative distribution function）：Probability of peak signal power being greater than a given power level versus peak-to-average power ratio (dB)
DECT (ETSI EN 300 176-1)
• 功率：Normal Transmit Power
• Power vs. time：Power time template
• Frequency offset：Frequency offset
• Frequency drift：Frequency drift during packet transmission
• Frequency deviation：S field, B field, whole packet
Navigation 1
• Test Capability：Carrier-to-noise ratio
• 输出功率范围：-60 to -130 dBm
• 电平精度：± 0.75 dB
通用与环境
• 尺寸：14.5” W x 3.2” H x 20.5” D (368 mm x 82 mm x 521 mm)
• 重量：26 lbs (11.8 kg)
• 功耗（maximum）：200 W
• 功耗（average）：150 W
• 供电要求：100 - 240 VAC, 50-60 Hz
• Supported browsers：Google Chrome, Mozilla Firefox
• 工作温度：+10°C to +50°C
• 存储温度：-20°C to +70°C (IEC EN60068-2-1, 2, 14)
• Specification validity：20°C to 35°C 60 minutes warm-up time at ambient temperature
• 工作湿度：15% to 95% relative humidity, non-condensing (IEC EN60068-2-30)
• EMC/EMI：61326-1: 2013 Industrial Environment, CISPR11 Class A per EN61326-1:2013 , FCC Part 15 Class A, VCCI V-3 Class A, BSMI CNS-13438 Class A, ACMA AS/NZS CISPR11: 2011, ICES-003 Class A
• 安全：IEC 61010-1, EN61010-1, UL61010-1:2012 and Canada: CSA C22.2 No. 61010-1, GI1, GI2
• 机械振动：MIL-STD 810G for Random Vibration
• 机械冲击：ASTM D3332-99
• RF Connector Torque：13 in-lbs (147 N-cm) Recommended
• 推荐校准周期：12 months
• 保修：12 months hardware, 12 months software updates
资源下载
以上规格取自 LitePoint 官方技术规格书（PDF）与官网产品页；标注「典型」的为厂家典型值。
LitePoint · onetest 仪器资源库
全部
LitePoint官方渠道
官方渠道（官网 / 热线 / 邮箱）
• 官网 www.litepoint.com
• 联系方式与销售咨询
www.litepoint.com/about/contact-us
• 技术支持与服务 www.litepoint.com/support
• 全球总部
90 Headquarters Drive, San Jose, CA 95134, USA
• 总部电话 +1.408.456.5000
全国办事处
中国区办事处（上海）
• 地址
Building 10 2nd Fl，1201 Gui Qiao Rd，Jin Qiao Export Processing Zone，Pudong, Shanghai，China Post Code 201206
• 电话 +86.21.6168.0810
• 传真 +86.21.6168.0809
中国区办事处（深圳）
• 地址
Room G-I, 6F, K-building，No.28 Keji South Road 12th，Nanshan District, Shenzhen 518057, P.R.C.
• 电话 +86.755.3391.0588
• 传真 +86.755.3391.0586
海外办事处（亚太 / 美洲 / 欧洲·中东·非洲）
• LitePoint Technology, Ltd.：Taiwan，4F, No. 360, Ruiguang Road，Taipei 114, Taiwan；电话：+886.2.8979.1789；备用电话：0809.080.360；传真：+886.2.7745.5298
• LitePoint Japan, Teradyne K.K.：Japan，7F MM park Building，3-6-3, Minatomirai, Nishi-ku，Yokohama, 220-0012，Japan；电话：+81 45 414 3641
• LitePoint Vietnam Limited：Unit 401, HITC building, No. 239，Xuan Thuy street, Cau Giay，Hanoi, Vietnam；电话：+84.243.204.8288
• Teradyne/LitePoint Illinois：21440 W. Lake Cook Road, 6th Floor，Deer Park, Illinois 60010；电话：+1.408.456.5000
• LitePoint Southern California：10509 Vista Sorrento Pkwy., Suite 116，San Diego, CA 92121 USA；电话：+1.408.456.5000
• LitePoint Denmark
Alfred Nobels Vej 27, 3. 9220，Aalborg Øst, Denmark；电话：+45.48.10.70.70；传真：+45.48.10.70.80
• LitePoint Israel
Sironit st，Building #18 MATAM，Haifa 3508409, Israel；电话：+972.4.911.2288；传真：+972.4.911.2290
授权分销商
中国区授权分销商（Shanghai Qianpuyang Technology Co., Ltd）
• 地址
Room 3006, 158 Yixian Road，Hongkou District, Shanghai, China
• 电话 +86 13681973678
中国区授权分销商（Shenzhen Jinghongzhi Instrument Co.,Ltd）
• 地址
22F IMT Tower, No. 1, Gaoxin South 7th Avenue，Nanshan District, Shenzhen, Guangdong, China
• 电话 86-0755-84365666
亚太授权分销商（ACE Solution Co., Ltd.，中国台湾）
• 地址
Taiwan，2F-1. No. 28, Taiyuan St.，Jhubei City, Hsinchu 302, Taiwan
• 电话 +886.3.552.5633
• 传真 +886.3.553.5610
亚太授权分销商（ATE Service Corporation，Japan）
• 地址
Japan，5-6-23 Minamimachida, Machida-shi，Tokyo 194-0005, Japan
• 电话 +81.42.795.8600
• 传真 +81.42.795.8615
亚太授权分销商（Crezon Technology，Korea）
• 地址
Korea，1209, 388, Dunchon-daero，Jungwon-gu, Seongnam-si，Gyeonggi-do, Republic of Korea
• 电话 +82.31.777.8949
• 传真 +82.31.777.8945
亚太授权分销商（Hakuto Co., Ltd.，Japan）
• 地址
Japan，1-1-13 Shinjuku，Shinjuku-Ku Tokyo, 160-8910 Japan
• 电话 +81.3.3355.7643
• 传真 +81.3.3355.7693
亚太授权分销商（Innovsys Technologies Pte., Ltd.，Singapore）
• 地址
Singapore，111 North Bridge Road，#27-01 Peninsula Plaza，Singapore 179098
• 电话 +65.6389.1700
• 传真 +65.6389.1701
亚太授权分销商（SIP Technology (M) SDN BHD，Malaysia）
• 地址
Malaysia，36 Lorong IKS Bukit Tengah，Taman IKS Bukit Tengah 14000，Penang Malaysia
• 电话 +604 508 8318
亚太授权分销商（Premier Measurement Solutions Pvt., Ltd.，India）
• 地址
India，403, Sobha Amber, Jakkur Plantation，Yelahanka Bangalore, 560 064, India
• 电话 +91.98451.03198
美洲授权分销商（Starvoy）
• 地址
Canada，4017 Carling Ave., Suite 101，Ottawa, Ontario K2K 2A3，Canada
• 电话 +1 (613) 592-8910
• 邮箱 sales@starvoy.com
• 网址 www.starvoy.com
美洲授权分销商（WD Tech）
• 地址 Argentina and Brazil
• 电话 +55 (92) 98450-9454
• 邮箱
rework-smartservice@smartservice-group.com
欧洲 / 中东 / 非洲授权分销商（Equipements Scientifiques S.A.）
• 地址
France，127 rue de Buzenval，92380 Garches, France
• 电话 +33 0147959900
• 传真 +33 0147011622
• 网址 www.es-france.com
欧洲 / 中东 / 非洲授权分销商（AlfaTest SRL）
• 地址
Cermena 22，300110 Timisoara，Romania
• 电话 +40 356401687
• 邮箱 office@alfatest.ro
• 网址 www.alfatest.ro
欧洲 / 中东 / 非洲授权分销商（mmt gmbh | Meffert Microwave Technology）
• 地址
Germany，mmt gmbh | Meffert Microwave Technology，Im Kohlgarten 14，56414 Steinefrenz，Germany
• 电话 +49 6435 303 9820-20
• 网址 https://www.meffert-mt.de/
• 邮箱 sales@meffert-mt.de
美国授权渠道代表（ATM）
• 覆盖
Massachusetts, New Hampshire, Maine, Vermont, Rhode Island, Connecticut, New York, New Jersey, Pennsylvania, Delaware, and Maryland
• 电话 +1(978) 458-0200
• 邮箱 atm@atmink.com
美国授权渠道代表（Cain Forlaw）
• 覆盖
Ohio, Indiana, Michigan, Western PA, Illinois, Wisconsin, Minnesota, North Dakota, South Dakota, Nebraska, Iowa, Kansas, Missouri
• 电话 +1(847) 202-9898
• 邮箱 sales@cain-forlaw.com
美国授权渠道代表（Cain Technologies）
• 覆盖 Southern California
• 电话 +1(805) 496-9702
• 邮箱 sales@caintech.com
美国授权渠道代表（Clearcomm）
• 覆盖 Florida
• 电话 +1(256) 721-0500
• 邮箱 sales@ClearCommSales.com
美国授权渠道代表（Ion Associates）
• 覆盖
All Latin America except for Argentina and Brazil
• 电话 +52 1 (33) 3122 0639
• 邮箱 admin@ionassoc.com
美国授权渠道代表（RFAN）
• 覆盖
Northern California and Northern Nevada
• 电话 +1 (408)752-7000
• 邮箱 sales@rfan.com
美国授权渠道代表（Southbridge）
• 覆盖
Alabama, Mississippi, Tennessee, Georgia, South Carolina, North Carolina
• 电话 +1 (256) 325-8926
• 邮箱 info@southbridge.com
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758