ONETEST 欢迎您

厂商登录 | 入驻

登录 | 注册 购物车 微信公众号
仪器资源库

严选商城

搜索

AI问答与智能搜索
二维码
请完成安全验证
产品库 严选商城

    类似产品

    The ALifecom NE6000 是一种用于测试和诊断长期演进（LTE）和LTE-Advanced（LTE-A）通信系统问题的测试系统NE6000模拟完整的LTE-A网络系统NE6000可用于执行与LTE和LTE-A信令相关的各种测试项目并为4G智能终端设备（UE）的开发和调试提供一系列的诊断和故障排除能力NE6000还提供了一个簡洁的选项可用于生产线和质量保证/质量控制（QA/QC）测试
    200、400 或 800 MHz 带宽380 MHz 至 6 GHz 或 7.3 GHz 频率范围IEEE 802.11a/b/g/j/p/n/ac/af/ah/ax、蓝牙 5.1、802.15.4、5G NR、2/3/4G高达 4096QAMMU-MIMO 和 OFDMA，包含每位用户的统计数据和射频性能高达 4x4 MIMO，可扩展至 8x8 MIMO功率、发射频谱模板、频谱平坦度、EVM 测量和分析
    200、400 或 800 MHz 带宽380 MHz 至 6 GHz 或 7.3 GHz 频率范围IEEE 802.11a/b/g/j/p/n/ac/af/ah/ax、蓝牙 5.1、802.15.4、5G NR、2/3/4G高达 4096QAMMU-MIMO 和 OFDMA，包含每位用户的统计数据和射频性能高达 4x4 MIMO，可扩展至 8x8 MIMO功率、发射频谱模板、频谱平坦度、EVM 测量和分析
    1 2

    同厂商产品

    75MHz 至 6GHz、32 个射频端口的多待测物蜂窝测试系统，覆盖 2G/3G/4G 与 LTE IoT 三档，内置夹具健康检查
    16 端口、400MHz 至 7300MHz 的 Wi-Fi 6E 测试系统，每端口原生支持 160MHz 与 80+80，兼顾蜂窝非信令测试
    覆盖 400MHz 至 7300MHz、320MHz 以上分析带宽的 Wi-Fi 8/7 测试平台，2/8/16 端口可选，真 MIMO 可扩至 16×16
    • «
    • 1

    IQxstream-5G 200MHz带宽 8端口5G Sub-6GHz蜂窝测试系统|LitePoint (在产)

    面向 Sub-6GHz 5G 的一体化蜂窝测试仪，200MHz 连续测量带宽、8 个射频端口，支持 3GPP NR 与 V5GTF

    参考价格 ：

    厂家：LitePoint （收录57个产品）

    产地：美国

    点击访问厂家官网

    产品描述
    详细指标
    软件和手册|白皮书
    购买渠道
    选件
    问大家
    视频
    测评
    口碑
    系统与解决方案

    LitePoint
    IQxstream-5G 蜂窝测试系统
    400MHz至6000MHz · 200MHz 中频带宽 · 8 个射频端口 · 5G NR 与 V5GTF
    产品简介
    IQxstream-5G 是 LitePoint 第一台 sub-6GHz 5G 一体化测试仪。
    它的关键数字是 200MHz 中频带宽——3GPP NR 的载波聚合要跑起来，带宽不够就只能分段测，测试时间直接翻倍。
    支持的规范包括 3GPP NR 5G 与准 5G 的 V5GTF，可以在同一台设备上向前兼容标准演进。
    对产线的意义在于：3.3 至 4.9GHz 这一段新分配的 5G 频谱，不需要为它重建测试台，换软件配置即可。
    面向 Sub-6GHz 5G 的一体化蜂窝测试仪，200MHz 连续带宽是它的核心指标。
    核心参数
    • 频率范围：400MHz至6000MHz（TDD）／400MHz至5100MHz（FDD）
    • 中频带宽：200MHz
    • 射频端口：8 个（4 组 ×2 路，N 型阴头）
    • 最大输入功率：+34dBm 平均 / +36dBm 峰值
    • 输入功率精度：±0.5dB（400MHz 至 3.8GHz）
    • 支持规范：3GPP NR 5G、V5GTF（准 5G）
    功能特性
    • 200MHz 连续带宽：5G NR 载波聚合分析一次采完，不用分段拼，直接缩短测试时间。
    • 面向 NR 标准演进：随 3GPP 规范升级，靠软件配置跟进，不换硬件。
    • 同时支持 V5GTF：准 5G 规范并存，早期 5G 设备仍可在同一台仪器上验证。
    • Sub-6GHz 新频段覆盖：3.3 至 4.9GHz 这一段全球新分配的 5G 频谱是主要战场。
    • 8 端口多 DUT：多台设备并行测试，单站产能不靠堆仪器。
    • Wi-Fi 制式兼顾：802.11ax/ac 与传统 Wi-Fi 也在技术选项内，连接与蜂窝可共用平台。
    应用场景
    • 5G Sub-6GHz 终端产线：NR 载波聚合校准与综测。
    • 5G 模组制造：多 DUT 并行，适合模组这类走量产品。
    • 准 5G（V5GTF）设备验证：早期 5G 设备的射频指标测试。
    • 研发与 DVT：NR 波形生成与分析，验证发射与接收指标。
    • 代工多制式混线：5G 与 Wi-Fi 产品共用一台测试仪。
    • 3.3–4.9GHz 新频段验证：新分配频谱上的功率与频谱掩码检查。
    资源下载
    以上内容与指标均取自LitePoint（莱特波特）（LitePoint）官网该产品详情页与官方产品资料，未标注口径的为厂家公布值。
    LitePoint · onetest 仪器资源库

     

     

    LitePoint
    IQxstream-5G 蜂窝测试系统 详细指标
    400MHz至6000MHz · 200MHz 中频带宽 · 8 个射频端口 · 5G NR 与 V5GTF
    详细指标
    指标取自 LitePoint 官方技术规格书与产品页；未列出的项目表示官方资料未给出，本站不作推测。
    端口说明
    • Power Switch：Power On/Off ｜ Pushbutton Switch
    • RF1A/RF1B：Cellular, Wi-Fi, Bluetooth input/output ｜ N female
    • RF2A/RF2B：Cellular, Wi-Fi, Bluetooth input/output ｜ N female
    • RF3A/RF3B：Cellular, Wi-Fi, Bluetooth input/output ｜ N female
    • RF4A/RF4B：Cellular, Wi-Fi, Bluetooth input/output ｜ N female
    • Power Indicator：LED green – powered up, running LED orange – powered up, standby ｜ LED indicator
    • Session Indicator：LED green – remote session active LED red – remote session lock ｜ LED indicator
    • Status Indicator：LED green – no faults/errors detected LED orange – Software error detected LED red – Hardware fault detected ｜ LED Indicator
    • RF port 1 indicator (A/B and C/D ports)：LED green – ports RF1 A/B are in one of the following status: • OFF/IN • IN/OFF • IN/IN LED orange – ports RF1 A/B are in one of the following status: • OUT/IN • IN/OUT LED red – ports RF1 A/B are in one of the following status: • OFF/OUT • OUT/OFF • OUT/OUT ｜ LED indicator
    • RF port 3 indicator (for both A and B port)：LED green – ports RF3 A/B are in one of the following status: • OFF/IN • IN/OFF • IN/IN LED orange – ports RF3 A/B are in one of the following status: • OUT/IN • IN/OUT LED red – ports RF3 A/B are in one of the following status: • OFF/OUT • OUT/OFF • OUT/OUT ｜ LED indicator
    • RF port 4 indicator (for both A and B port)：LED green – ports RF4 A/B are in one of the following status: • OFF/IN • IN/OFF • IN/IN LED orange – ports RF4 A/B are in one of the following status: • OUT/IN • IN/OUT LED red – ports RF4 A/B are in one of the following status: • OFF/OUT • OUT/OFF • OUT/OUT ｜ LED indicator
    • USB (2 ports)：USB 2.0 compatible connection to external controller ｜ USB Type A
    • 10 MHz ref input：10 MHz reference input ｜ BNC female
    • 10 MHz ref output：10 MHz reference output ｜ BNC female
    • Marker out / trigger in 1：TTL compatible ｜ BNC female
    • Marker out / trigger in 2：TTL compatible ｜ BNC female
    • Marker out / trigger in 3：TTL compatible ｜ BNC female
    • Marker out / trigger In 4：TTL compatible ｜ BNC female
    • AC in：AC power input ｜ 100 to 240 VAC (automatically switched) 50 to 60 Hz, Includes hard power switch
    • DVI port：Display ｜ DVI-D
    • VGA port：Display ｜ VGA-15 pin
    • Communication I/O LAN：1000 Base-T LAN ｜ RJ-45
    • GPIO：General purpose input/output ｜ 50-pin connector
    通用技术规格
    • 频率范围：400 to 6000 MHz (TDD) 400 to 5100 MHz (FDD)
    • 中频带宽：200 MHz
    • 输入功率：+34 dBm (avg) +36 dBm (peak)
    • Input Power Accuracy1：Specification for Input > -40 dBm: ± 0.5 dB 400 MHz – 3800 MHz ± 1 dB >3800 MHz – 6000 MHz Typical: ± 0.4 dB 400 MHz – 3800 MHz ± 0.5 dB >3800 MHz – 6000 MHz
    • Input return loss：17 dB, 400 to 3800 MHz, typical 14 dB, 3800 to 6000 MHz, typical
    • 杂散（signal applied）：< -52 dBc (CW, for signal levels greater than -20 dBm)
    • 频谱平坦度：Specification: ≤ ± 1 dB (± 100 MHz) Typical: ± 0.50 dB (± 100 MHz)
    • Inherent spurious floor (no signal)：RF1 to RF4 ≤ -80 dBm
    • 噪声系数：≤ 25 dB at minimum input attenuation
    • Integrated Phase Noise：≤ 0.3 degrees (100 Hz to 1 MHz), 400 to 6000 MHz 0.2 degrees (100 Hz to 1 MHz) typical
    • Signal to Noise Ratio：≥ 55 dB 100 kHz RBW
    • Sample data rates：10, 20, 30.72, 40, 80, 160, 240 MHz
    • Waveform Capture Duration：at 10 MHz sampling data rate: 9600 ms at 20 MHz sampling data rate: 4800 ms at 30.72 MHz sampling data rate: 3125 ms at 40 MHz sampling data rate: 2400 ms at 80 MHz sampling data rate: 1200 ms at 160 MHz sampling data rate: 600 ms at 240 MHz sampling data rate: 400 ms
    • Absolute minimum value：Wideband RF ｜ -30 dBm
    • Absolute maximum value：Limited by the maximum input power
    • Trigger relative threshold：Up to -40 dB below RLEV
    • 电平精度：± 2 dB
    • 输出功率范围（CW）：1 port active: +5 to -130 dBm (400 to 6000 MHz) All ports active: 0 to -130 dBm (≤ 4900 MHz) -10 to -130 dBm (> 4900 MHz)
    • Output Power Accuracy1：Specifications and [Typical]: 1 port active ± 0.5 dB @ levels ≥ -50 dBm 400 MHz to <3800 MHz ± 1 dB [0.7 dB] @ levels ≥ -50 dBm 3800 MHz to 6000 MHz ± 0.75 dB @ -100 to < -50 dBm 400 MHz to 3800 MHz ± 1 dB @ -100 to < -50 dBm 3800 MHz to 6000MHz
    • Output return loss：17 dB, 400 to 3800 MHz, typical 14 dB, 3800 to 6000 MHz, typical
    • 杂散（in channel）：Specification: ｜ ≤ -40 dBc (200 MHz, >-55 dBm) (CW)
    • 杂散（out of channel）：Out-of-band (> ± 100 MHz from carrier): ｜ ≤ -40 dBc (CW, excluding harmonics distortions)
    • 频谱平坦度：Specification: ｜ ± 1 dB ( ± 100 MHz)
    • Integrated Phase Noise (TDD Mode)：≤ 0.3 degrees (100 Hz to 1 MHz)
    • Integrated Phase Noise (FDD mode)：≤ 0.4 degrees (100 Hz to 1 MHz)
    • Signal to Noise Ratio：Specification: ｜ ≥ 60 dB (100 KHz signal BW), power level -40 dBm
    • Carrier Leakage：≤ -40 dBc (CW output) for Power > -50 dBm
    • 采样数据率：10, 20, 30.72, 40, 80, 160, 240 MHz
    • Waveform Playback Duration：at 10 MHz sampling data rate: 9600 ms at 20 MHz sampling data rate: 4800 ms at 30.72 MHz sampling data rate: 3125 ms at 40 MHz sampling data rate: 2400 ms at 80 MHz sampling data rate: 1200 ms at 160 MHz sampling data rate: 600 ms at 240 MHz sampling data rate: 400 ms
    • Oscillator type：OCXO
    • 频率：10 MHz
    • Initial accuracy (25°C, after 60 minute warm-up)：< ± 0.05 ppm
    • Maximum aging：< ± 0.1 ppm per year
    • Temperature stability：< ± 0.05 ppm over 0°C to 50°C range, referenced to 25°C
    • 预热时间（to within ±0.1 ppm at 25°C）：> 30 minutes
    • Max Frequency Variation：0.5 ppm
    • Input Voltage Range：0.3 Vpp to 4.0 Vpp
    • 阻抗：200 Ω
    • 输出电压：> 0.8 Vpp
    • 阻抗：50 Ω
    • 阻抗：5 kΩ nominal
    • Trigger1/2/3/4 Input Level：3.5V - V (IH) 1.5V – V (IL)
    • Trigger1/2/3/4 Output Level：3.8 V to 4.9V - V (OH), -32 mA max 0.1 V to 0.55V - V (OL), 32 mA max
    通用与环境
    • 重量：26 lbs (11.8 kg)
    • 功耗（maximum）：200W
    • 功耗（average）：150 W
    • 供电要求：100 - 240 VAC, 50-60 Hz
    • Supported browsers：Google Chrome, Mozilla Firefox
    • 工作温度：+10°C to +50°C (IEC EN60068-2-1, 2, 14)
    • 存储温度：-20°C to +70°C (IEC EN60068-2-1, 2, 14)
    • Specification validity temperature：20°C to 35°C, 60 minutes warm-up time at ambient temperature
    • 工作湿度：15% to 95% relative humidity, non-condensing (IEC EN60068-2-30)
    • EMC/EMI：61326-1: 2013 Industrial Environment, CISPR11 Class A per EN61326-1:2013 , FCC Part 15 Class A, VCCI V-3 Class A, BSMI CNS-13438 Class A, ACMA AS/NZS CISPR11: 2011, ICES-003 Class A
    • 安全：IEC 61010-1, EN61010-1, UL61010-1:2012 and Canada: CSA C22.2 No. 61010-1, GI1, GI2
    • 机械振动：MIL-STD 810G for Random Vibration
    • 机械冲击：ASTM D3332-99
    • RF Connector Torque：13 in-lbs (147 N-cm) Recommended
    • 推荐校准周期：12 months
    • 保修：12 months hardware, 12 months software updates
    5G 频段
    • n1：2110 MHz to 2170 MHz ｜ 1920 MHz to 1980 MHz ｜ FDD
    • n2：1930 MHz to 1990 MHz ｜ 1850 MHz to 1910 MHz ｜ FDD
    • n3：1805 MHz to 1880 MHz ｜ 1710 MHz to 1785 MHz ｜ FDD
    • n5：869 MHz to 894 MHz ｜ 824 MHz to 849 MHz ｜ FDD
    • n7：2620 MHz to 2690 MHz ｜ 2500 MHz to 2570 MHz ｜ FDD
    • n8：925 MHz to 960 MHz ｜ 880 MHz to 915 MHz ｜ FDD
    • n12：729 MHz to 746 MHz ｜ 699 MHz to 716 MHz ｜ FDD
    • n13：746 MHz to 756 MHz ｜ 777 MHz to 787 MHz ｜ FDD
    • n14：758 MHz to 768 MHz ｜ 788 MHz to 798 MHz ｜ FDD
    • n18：860 MHz to 875 MHz ｜ 815 MHz to 830 MHz ｜ FDD
    • n20：791 MHz to 821 MHz ｜ 832 MHz to 862 MHz ｜ FDD
    • n24：1525 MHz to 1559 MHz ｜ 1626.5 MHz to 1660.5 MHz ｜ FDD
    • n25：1930 MHz to 1995 MHz ｜ 1850 MHz to 1915 MHz ｜ FDD
    • n26：859 MHz to 894 MHz ｜ 814 MHz to 849 MHz ｜ FDD
    • n28：758 MHz to 803 MHz ｜ 703 MHz to 748 MHz ｜ FDD
    • n29：717 MHz to 728 MHz ｜ Downlink Only ｜ SDL
    • n30：2350 MHz to 2360 MHz ｜ 2305 MHz to 2315 MHz ｜ FDD
    • n34：2010 MHz to 2025 MHz ｜ 2010 MHz to 2025 MHz ｜ TDD
    • n38：2570 MHz to 2620 MHz ｜ 2570 MHz to 2620 MHz ｜ TDD
    • n39：1880 MHz to 1920 MHz ｜ 1880 MHz to 1920 MHz ｜ TDD
    • n40：2300 MHz to 2400 MHz ｜ 2300 MHz to 2400 MHz ｜ TDD
    • n41：2496 MHz to 2690 MHz ｜ 2496 MHz to 2690 MHz ｜ TDD
    • n46：5150 MHz to 5925 MHz ｜ 5150 MHz to 5925 MHz ｜ TDD
    • n47：5855 MHz to 5925 MHz ｜ 5855 MHz to 5925 MHz ｜ TDD
    • n48：3550 MHz to 3700 MHz ｜ 3550 MHz to 3700 MHz ｜ TDD
    • n50：1432 MHz to 1517 MHz ｜ 1432 MHz to 1517 MHz ｜ TDD
    • n51：1427 MHz to 1432 MHz ｜ 1427 MHz to 1432 MHz ｜ TDD
    • n53：2483.5 MHz to 2495 MHz ｜ 2483.5 MHz to 2495 MHz ｜ TDD
    • n54：1670 MHz to 1675 MHz ｜ 1670 MHz to 1675 MHz ｜ TDD
    • n65：2110 MHz to 2200 MHz ｜ 1920 MHz to 2010 MHz ｜ FDD
    • n66：2110 MHz to 2200 MHz ｜ 1710 MHz to 1780 MHz ｜ FDD
    • n67：738 MHz to 758 MHz ｜ Downlink Only ｜ SDL
    • n70：1995 MHz to 2020 MHz ｜ 1695 MHz to 1710 MHz ｜ FDD
    • n71：617 MHz to 652 MHz ｜ 663 MHz to 698 MHz ｜ FDD
    • n74：1475 MHz to 1518 MHz ｜ 1427 MHz to 1470 MHz ｜ FDD
    • n75：1432 MHz to 1517 MHz ｜ Downlink Only ｜ SDL
    • n76：1427 MHz to 1432 MHz ｜ Downlink Only ｜ SDL
    • n77：3300 MHz to 4200 MHz ｜ 3300 MHz to 4200 MHz ｜ TDD
    • n78：3300 MHz to 3800 MHz ｜ 3300 MHz to 3800 MHz ｜ TDD
    • n79：4400 MHz to 5000 MHz ｜ 4400 MHz to 5000 MHz ｜ TDD
    • n80：Uplink Only ｜ 1710 MHz to 1785 MHz ｜ SUL
    • n81：Uplink Only ｜ 880 MHz to 915 MHz ｜ SUL
    • n82：Uplink Only ｜ 832 MHz to 862 MHz ｜ SUL
    • n83：Uplink Only ｜ 703 MHz to 748 MHz ｜ SUL
    • n84：Uplink Only ｜ 1920 MHz to 1980 MHz ｜ SUL
    • n85：728 MHz to 746 MHz ｜ 698 MHz to 716 MHz ｜ FDD
    • n86：Uplink Only ｜ 1710 MHz to 1780 MHz ｜ SUL
    • n89：Uplink Only ｜ 824 MHz to 849 MHz ｜ SUL
    • n90：2496 MHz to 2690 MHz ｜ 2496 MHz to 2690 MHz ｜ TDD
    • n91：1427 MHz to 1432 MHz ｜ 832 MHz to 862 MHz ｜ FDD
    • n92：1432 MHz to 1517 MHz ｜ 832 MHz to 862 MHz ｜ FDD
    • n93：1427 MHz to 1432 MHz ｜ 880 MHz to 915 MHz ｜ FDD
    • n94：1432 MHz to 1517 MHz ｜ 880 MHz to 915 MHz ｜ FDD
    • n95：Uplink Only ｜ 2010 MHz to 2025 MHz ｜ SUL
    • n97：Uplink Only ｜ 2300 MHz to 2400 MHz ｜ SUL
    • n98：Uplink Only ｜ 1880 MHz to 1920 MHz ｜ SUL
    • n99：Uplink Only ｜ 1626.5 MHz to 1660.5 MHz ｜ SUL
    • n100：919.4 MHz to 925 MHz ｜ 874.4 MHz to 880 MHz ｜ FDD
    • n101：1900 MHz to 1910 MHz ｜ 1900 MHz to 1910 MHz ｜ TDD
    • n105：612 MHz to 652 MHz ｜ 663 MHz to 703 MHz ｜ FDD
    • n255：2170 MHz to 2200 MHz ｜ 1980 MHz to 2010 MHz ｜ FDD
    • n256：1525 MHz to 1559 MHz ｜ 1626.5 MHz to 1660.5 MHz ｜ FDD
    5G 测量规格
    • Transmit Power：6.2 ｜ Maximum Power
    • Output Power Dynamics：6.3 ｜ Min Power Relative Power On/Off Time Mask
    • Transmit Signal Quality：6.4 ｜ Frequency Error EVM: -45 dB Typical (Tx-Rx loopback at 100 MHz CC, 3.5 GHz, MCS14, -10 dBm transmit power level) Carrier Leakage In-band Emissions
    • Output RF Spectrum Emissions：6.5 ｜ Occupied Bandwidth Spectrum Emission Mask ACLR
    • Receiver Sensitivity：7.3 ｜ Reference Sensitivity Power
    • Receiver Level：7.4 ｜ Maximum Input Level
    • Receiver Blocking：7.5 ｜ Adjacent Channel Selectivity (Characterization only, not recommended for manufacturing)
    5G NR Small Cell Base Station Tests
    • Base Station Output Power：6.2
    • Output Power Dynamics：6.3.3 ｜ Total Power Dynamic Range
    • Transmit ON/OFF Power：6.4.1 6.4.2 ｜ Transmitter OFF Power Transmitter Transient Period
    • Transmitted Signal Quality：6.5.2 6.5.3 6.5.4 ｜ Frequency Error Modulation Quality Time Alignment Error
    • Unwanted Emissions：6.6.2 6.6.3 6.6.4 ｜ Occupied Bandwidth Adjacent Channel Leakage Power Ratio (ACLR) Operating band unwanted emissions (OBUE)
    • Reference Sensitivity Level：7.2 ｜ DUT support required
    • 动态范围：7.3 ｜ Characterization only, not recommended for manufacturing. Requires additional signal generator
    • In-Band Selectivity and Blocking：7.4.1 7.4.2 ｜ Adjacent Channel Selectivity In-Band Blocking (Characterization only, not recommended for manufacturing. Requires additional signal generator)
    • Receiver Intermodulation：7.7 ｜ Characterization only, not recommended for manufacturing. Requires additional signal generator
    • In-Channel Selectivity：7.8 ｜ Characterization only, not recommended for manufacturing. Requires additional signal generator
    WCDMA/HSPA/HSPA+/Dual Carrier HSPA+ 频段
    • I：1920 - 1980 MHz ｜ 2110 - 2170 MHz
    • II：1850 - 1910 MHz ｜ 1930 - 1990 MHz
    • III：1710 - 1785 MHz ｜ 1805 - 1880 MHz
    • IV：1710 - 1755 MHz ｜ 2110 - 2155 MHz
    • V：824 - 849 MHz ｜ 869 - 894 MHz
    • VI：830 - 840 MHz ｜ 875 - 885 MHz
    • VII：2500 - 2570 MHz ｜ 2620 - 2690 MHz
    • VIII：880 - 915 MHz ｜ 925 - 960 MHz
    • IX：1749.9 - 1784.9 MHz ｜ 1844.9 - 1879.9 MHz
    • X：1710 - 1770 MHz ｜ 2110 - 2170 MHz
    • XI：1427.9 - 1447.9 MHz ｜ 1475.9 - 1495.9 MHz
    • XII：698 - 716 MHz ｜ 728 - 746 MHz
    • XIII：777 - 787 MHz ｜ 746 - 756 MHz
    • XIV：788 - 798 MHz ｜ 758 - 768 MHz
    GSM/EDGE 频段
    • GSM 450 band：460 MHz to 468 MHz ｜ 450 MHz to 458 MHz
    • GSM 480 band：488 MHz to 496 MHz ｜ 478 MHz to 486 MHz
    • GSM 750 band：747 MHz to 762 MHz ｜ 777 MHz to 792 MHz
    • GSM 850 band：869 MHz to 894 MHz ｜ 824 MHz to 849 MHz
    • R-GSM 900 band：921 MHz to 960 MHz ｜ 876 MHz to 915 MHz
    • DCS 1800 band：1805 MHz to 1880 MHz ｜ 1710 MHz to 1785 MHz
    • GSM 1900 band：1930 MHz to 1990 MHz ｜ 1850 MHz to 1910 MHz
    GSM/EDGE Tests
    • TX output power：13.3, 13.17.3
    • Transmit burst timing：13.3, 13.17.3
    • 频率误差：13.1, 13.17.1
    • Phase error：13.1, 13.17.1
    • Error Vector Magnitude (8-PSK)：13.17.1
    • Origin offset suppression：13.17.1 ｜ I/Q Mismatch, I/Q Offset
    • Output RF spectrum due to modulation (M-ORFS)：13.4, 13.17.4
    • Output RF spectrum due to switching (S-ORFS)：13.4, 13.17.4
    • 参考灵敏度：14.2 ｜ DUT support required
    • Usable input level range：14.3 ｜ DUT support required
    • 接收电平：DUT support required. A common test as part of device calibration / verification
    cdma2000 / 1xEV-DO Tests
    • 最大输出功率：4.4.5 ｜ 4.3.4
    • 频率准确度：4.3.4 ｜ 4.2.2
    • EVM：Available but not part of standards for cdma2000
    • Rho(p)：4.3.4 ｜ 4.2.2
    • Code domain power：4.3.5 ｜ 4.3.8
    • ACLR：Available but not part of standards for cdma2000. Faster than the Conducted Spurious Emissions Test.
    • Receiver sensitivity：3.5.1 ｜ 3.3.1 ｜ DUT support required
    • RX dynamic range：3.5.1 ｜ 3.3.1 ｜ DUT support required
    • 接收电平：DUT support required. A common test as part of device calibration / verification.
    802.11be (Wi-Fi 7) 测量规格
    • EVM：EVM averaged over payload based on standard requirements (Typical) ｜ Residual loopback EVM (preamble only channel estimation): ≤ -46 dB (-5 to -15 dBm) 2.4 GHz frequency band 802.11ax waveform, 40 MHz, MCS 11 ≤ -46 dB (-8 to -15 dBm) Measured at 5755 MHz 802.11ax waveform, 80 MHz, MCS 11 Averaged over 20 packets Low distortion mode
    • Peak power：Peak power over all symbols (dBm) ｜ VSA power accuracy: ± 0.5 dB (400 MHz – 3800 MHz), ± 1 dB (>3800 MHz – 6000 MHz)
    • RMS power：All: average power of complete data capture (dBm)
    • Max avg power：Peak value of the amplitude as a moving average over 40 samples (dBm)
    • I/Q amplitude error：I/Q amplitude imbalance (%) and approximate contribution to EVM (dB)
    • I/Q phase error：I/Q phase imbalance (degrees) and approximate contribution to EVM (dB)
    • 频率误差：Carrier frequency error (kHz) ｜ VSA measurement error: ≤ ± 0.2 ppm calibrated
    • RMS phase noise：Integrated phase noise (degrees) ｜ VSA integrated phase noise: < 0.3 degrees (100 Hz to 1 MHz)
    • PSD：Power spectral density (dBm/Hz) versus frequency offset center frequency ± 80 MHz
    • Spectral mask：Transmit spectrum mask
    • 频谱平坦度：Reflects variation of signal energy as a function of OFDM subcarrier number 802.11a/g OFDM signals only ｜ VSA flatness over 160 MHz BW: ± 1 dB
    • Sidelobe analysis (spectral mask, LO leakage)：Center peak and peaks of 1st and 2nd upper/lower sidelobes (dB) 802.11b/g DSSS signals only
    • CCDF（complementary cumulative distribution function）：Probability of peak signal power being greater than a given power level versus peak-to-average power ratio (dB)
    • Eye diagram：I and Q channels versus time (802.11b/g DSSS signals only)
    • PSDU data：Recovered binary data sequence, including the MAC header and Frame Check Sequence, if present
    • Raw capture data：I and Q signals versus time
    • General waveform analysis：DC offset, RMS level, minimum/ maximum amplitude, peak-to-peak amplitude, RMS I- and Q-channel levels
    802.11ax (Wi-Fi 6) Waveform Generation
    • PPDU format：HE-SU, HE-MU, HE-EXT-SU (extended range), HE-TRIG (trigger based)
    • 带宽：20 MHz, 40 MHz, 80 MHz, 160 MHz, 80 + 80 MHz
    • 调制：BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM, 4096-QAM
    • OFDMA：HE-MU (Downlink), HE-TRIG PPDU (Uplink)
    • MU MIMO：Downlink, Uplink, up to 8 users
    • HE PPDU configuration：HE-LTF, GI time, SIG-A, SIG-B
    • DCM (Dual Carrier Modulation)：On, Off
    • Coding type：LDPC, BCC
    • HE-MU PPDU configuration：Per RU configuration: Station ID, size, user number, index, segment, power boost factor, MCS index, spatial mapping
    • Trigger Frame configuration：Per RU configuration: index, RU allocation, MCS index, target RSSI
    • HE-TRIG based PPDU：Per RU configuration: size, user number, index, MCS index, spatial mapping
    802.11ax (Wi-Fi 6) Waveform Analysis
    • PPDU format：HE-SU, HE-MU, HE-EXT-SU (extended range), HE-TRIG (trigger based)
    • TX Quality Info：PSDU analysis and decode including HE-LTF, GI time, SIG-A, SIG-B and CRC, user number, RU index, size, MCS index
    • Downlink OFDMA & MU-MIMO analysis：Per User/RU composite and individual EVM and Power results
    • Uplink HE-TRIG PPDU & MU-MIMO analysis：Per User/RU composite and individual EVM and Power results including EVM of unoccupied tones
    • Trigger Frame analysis：Decode of common info fields and user info fields
    • Trigger Based Test：Dual ended test designed to verify STA and AP compliance for HE-TRIG PPDU: Downlink transmission of Trigger frame with configurable index, RU allocation, MCS index, target RSSI Uplink analysis of STA Carrier Frequency Offset (CFO) in the HE-TRIG PPDU per user/RU Uplink analysis of time offset between the trigger frame and the STA HE-TRIG PPDU per user/RU
    MIMO 系统性能
    • VSA capture trigger accuracy：≤ ± 3.5 ns
    • VSA start trigger accuracy：≤ ± 3.5 ns
    For performance refer to general VSA/VSG hardware specifications
    • TX output power：Transmit DUT output power (dBm)
    • TX output spectrum：Transmit DUT power spectral density
    • 20 dB bandwidth：Bandwidth between the ± 20 dB down points of the modulation waveform
    • In-band emissions (Adjacent channel)：Spurious emission measured at ± 5 MHz of DUT TX frequency only
    • 调制特性：Average and peak frequency deviation (Hz)
    • Carrier frequency tolerance：Carrier frequency offset (Hz)
    • Relative transmit power (EDR)：Average power of complete data capture (dBm)
    • Carrier frequency stability (EDR)：Frequency drift over the Bluetooth EDR burst duration (Hz)
    • Receive sensitivity1：Receive sensitivity test using LitePoint or user-generated waveforms. Includes Dirty Packets.
    • 最大输入信号电平：Assuming single-ended BER measurement
    • RMS EVM (EDR)：RMS EVM for Bluetooth EDR
    • Peak EVM (EDR)：Peak EVM for Bluetooth EDR
    • In-band emissions at NOC1：Spurious emission measured at ± 5 MHz of DUT TX frequency only
    • Carrier frequency offset and drift at NOC1：Carrier frequency offset (Hz) and change over the Bluetooth burst (Hz)
    • Receiver sensitivity at NOC1,2：Receive sensitivity test using LitePoint or user-generated waveforms
    • PER report integrity：Verifies the DUT PER report mechanism
    • In-band emissions：Spurious emission measured at ± 5 MHz of DUT TX frequency only. Tested at 1 Mbps, 2 Mbps
    • 调制特性：Average and peak frequency deviation (Hz). Tested at 1 Mbps, 2 Mbps, 125 kbps
    • Carrier Frequency offset and drift：Carrier frequency offset (Hz) and change over the Bluetooth burst (Hz). Tested at 1 Mbps, 2 Mbps, 125 kbps
    • Stable Modulation Characteristics：Tested at 1 Mbps, 2 Mbps
    • Receiver Sensitivity：Receive sensitivity test using LitePoint or user-generated waveforms. Tested at 1 Mbps, 2 Mbps, 125 kbps
    • Receiver Sensitivity – Stable Modulation Index：Tested at 1 Mbps, 2 Mbps, 500 kbps, 125 kbps
    • 最大输入信号电平：Assuming single-ended BER measurement. Tested at 1 Mbps, 2 Mbps
    • Maximum Input signal level – Stable Modulation Index：Tested at 1 Mbps, 2 Mbps
    • C/I and Receiver Selectivity Performance：Tested at 1 Mbps, 2 Mbps, 500 kbps, 125 kbps
    • Blocking Performance：Tested at 1 Mbps, 2 Mbps
    • Intermodulation Performance：Tested at 1 Mbps, 2 Mbps
    • PER Report Integrity：Verifies the DUT PER report mechanism. Tested at 1 Mbps, 2 Mbps, 500 kbps, 125 kbps
    • Output Power, with Constant Tone Extension：Verifies maximum peak and average power emitted when transmitting with a Constant Tone Extension.
    • Carrier Frequency offset and drift, with Constant Tone Extension：Verifies carrier frequency offset and carrier drift of the transmitted Constant Tone Extension portion in a transmitted signal with a Constant Tone Extension. Tested at 1 Mbps, 2 Mbps
    • IQ Samples Coherency, AoD Receiver：Verifies relative phase values derived from the I/Q values sampled at AoD Receiver from a Constant Tone Extension. Tested at 1 Mbps, 2 Mbps, 1 µs Slot, 2 µs Slot
    • IQ Samples Coherency, AoA Receiver1：Verifies relative phase values derived from the I/Q values sampled at AoD Receiver from a Constant Tone Extension. Tested at 1 Mbps, 2 Mbps, 2 µs Slot
    • IQ Samples Dynamic Range, AoD Receiver：Verifies the I/Q values sampled at AoD Receiver when varying the dynamic range of the Constant Tone Extension. Tested at 1 Mbps, 2 Mbps, 1 µs Slot, 2 µs Slot
    • IQ Samples Dynamic Range, AoA Receiver1：Verifies the I/Q values sampled at AoA Receiver when varying the dynamic range of the Constant Tone Extension. Tested at 1 Mbps, 2 Mbps, 2 µs Slot
    ZigBee (802.15.4), Z-wave (ITU-T G.9959), Wi-SUN (MR-FSK IEEE 802.15.4g)
    • 输出功率：Transmit DUT output power (dBm)
    • Power spectral density：Transmit DUT power spectral density
    • Center Frequency Tolerance：Tx center frequency tolerance
    • EVM：Offset: compensate the I and Q offset in OQPSK Normal: no compensation applied
    • Other modulation quality measurements：LO leakage, clock error, phase error, symbol clock error
    • CCDF（complementary cumulative distribution function）：Probability of peak signal power being greater than a given power level versus peak-to-average power ratio (dB)
    DECT (ETSI EN 300 176-1)
    • 功率：Normal Transmit Power
    • Power vs. time：Power time template
    • Frequency offset：Frequency offset
    • Frequency drift：Frequency drift during packet transmission
    • Frequency deviation：S field, B field, whole packet
    Navigation 1
    • Test Capability：Carrier-to-noise ratio
    • Output frequency range：GPS: L1, L2, L5 GLONASS: 1598 to 1606 MHz COMPASS: 1561.098 (+/- 2.046) MHz Galileo: 1559 to 1593 MHz
    • Number of simultaneous channels：1
    • 输出功率范围：-60 to -130 dBm
    • 电平精度：± 0.75 dB
    资源下载
    以上规格取自 LitePoint 官方技术规格书（PDF）与官网产品页；标注「典型」的为厂家典型值。
    LitePoint · onetest 仪器资源库

    全部

     

    LitePoint官方渠道


    官方渠道（官网 / 热线 / 邮箱）


    • 官网　www.litepoint.com


    • 联系方式与销售咨询

    www.litepoint.com/about/contact-us


    • 技术支持与服务　www.litepoint.com/support


    • 全球总部

    90 Headquarters Drive, San Jose, CA 95134, USA


    • 总部电话　+1.408.456.5000


    全国办事处


    中国区办事处（上海）


    • 地址

    Building 10 2nd Fl，1201 Gui Qiao Rd，Jin Qiao Export Processing Zone，Pudong, Shanghai，China Post Code 201206


    • 电话　+86.21.6168.0810


    • 传真　+86.21.6168.0809


    中国区办事处（深圳）


    • 地址

    Room G-I, 6F, K-building，No.28 Keji South Road 12th，Nanshan District, Shenzhen 518057, P.R.C.


    • 电话　+86.755.3391.0588


    • 传真　+86.755.3391.0586


    海外办事处（亚太 / 美洲 / 欧洲·中东·非洲）


    • LitePoint Technology, Ltd.：Taiwan，4F, No. 360, Ruiguang Road，Taipei 114, Taiwan；电话：+886.2.8979.1789；备用电话：0809.080.360；传真：+886.2.7745.5298


    • LitePoint Japan, Teradyne K.K.：Japan，7F MM park Building，3-6-3, Minatomirai, Nishi-ku，Yokohama, 220-0012，Japan；电话：+81 45 414 3641


    • LitePoint Vietnam Limited：Unit 401, HITC building, No. 239，Xuan Thuy street, Cau Giay，Hanoi, Vietnam；电话：+84.243.204.8288


    • Teradyne/LitePoint Illinois：21440 W. Lake Cook Road, 6th Floor，Deer Park, Illinois 60010；电话：+1.408.456.5000


    • LitePoint Southern California：10509 Vista Sorrento Pkwy., Suite 116，San Diego, CA 92121 USA；电话：+1.408.456.5000


    • LitePoint Denmark

    Alfred Nobels Vej 27, 3. 9220，Aalborg Øst, Denmark；电话：+45.48.10.70.70；传真：+45.48.10.70.80


    • LitePoint Israel

    Sironit st，Building #18 MATAM，Haifa 3508409, Israel；电话：+972.4.911.2288；传真：+972.4.911.2290


    授权分销商


    中国区授权分销商（Shanghai Qianpuyang Technology Co., Ltd）


    • 地址

    Room 3006, 158 Yixian Road，Hongkou District, Shanghai, China


    • 电话　+86 13681973678


    中国区授权分销商（Shenzhen Jinghongzhi Instrument Co.,Ltd）


    • 地址

    22F IMT Tower, No. 1, Gaoxin South 7th Avenue，Nanshan District, Shenzhen, Guangdong, China


    • 电话　86-0755-84365666


    亚太授权分销商（ACE Solution Co., Ltd.，中国台湾）


    • 地址

    Taiwan，2F-1. No. 28, Taiyuan St.，Jhubei City, Hsinchu 302, Taiwan


    • 电话　+886.3.552.5633


    • 传真　+886.3.553.5610


    亚太授权分销商（ATE Service Corporation，Japan）


    • 地址

    Japan，5-6-23 Minamimachida, Machida-shi，Tokyo 194-0005, Japan


    • 电话　+81.42.795.8600


    • 传真　+81.42.795.8615


    亚太授权分销商（Crezon Technology，Korea）


    • 地址

    Korea，1209, 388, Dunchon-daero，Jungwon-gu, Seongnam-si，Gyeonggi-do, Republic of Korea


    • 电话　+82.31.777.8949


    • 传真　+82.31.777.8945


    亚太授权分销商（Hakuto Co., Ltd.，Japan）


    • 地址

    Japan，1-1-13 Shinjuku，Shinjuku-Ku Tokyo, 160-8910 Japan


    • 电话　+81.3.3355.7643


    • 传真　+81.3.3355.7693


    亚太授权分销商（Innovsys Technologies Pte., Ltd.，Singapore）


    • 地址

    Singapore，111 North Bridge Road，#27-01 Peninsula Plaza，Singapore 179098


    • 电话　+65.6389.1700


    • 传真　+65.6389.1701


    亚太授权分销商（SIP Technology (M) SDN BHD，Malaysia）


    • 地址

    Malaysia，36 Lorong IKS Bukit Tengah，Taman IKS Bukit Tengah 14000，Penang Malaysia


    • 电话　+604 508 8318


    亚太授权分销商（Premier Measurement Solutions Pvt., Ltd.，India）


    • 地址

    India，403, Sobha Amber, Jakkur Plantation，Yelahanka Bangalore, 560 064, India


    • 电话　+91.98451.03198


    美洲授权分销商（Starvoy）


    • 地址

    Canada，4017 Carling Ave., Suite 101，Ottawa, Ontario K2K 2A3，Canada


    • 电话　+1 (613) 592-8910


    • 邮箱　sales@starvoy.com


    • 网址　www.starvoy.com


    美洲授权分销商（WD Tech）


    • 地址　Argentina and Brazil


    • 电话　+55 (92) 98450-9454


    • 邮箱

    rework-smartservice@smartservice-group.com


    欧洲 / 中东 / 非洲授权分销商（Equipements Scientifiques S.A.）


    • 地址

    France，127 rue de Buzenval，92380 Garches, France


    • 电话　+33 0147959900


    • 传真　+33 0147011622


    • 网址　www.es-france.com


    欧洲 / 中东 / 非洲授权分销商（AlfaTest SRL）


    • 地址

    Cermena 22，300110 Timisoara，Romania


    • 电话　+40 356401687


    • 邮箱　office@alfatest.ro


    • 网址　www.alfatest.ro


    欧洲 / 中东 / 非洲授权分销商（mmt gmbh | Meffert Microwave Technology）


    • 地址

    Germany，mmt gmbh | Meffert Microwave Technology，Im Kohlgarten 14，56414 Steinefrenz，Germany


    • 电话　+49 6435 303 9820-20


    • 网址　https://www.meffert-mt.de/


    • 邮箱　sales@meffert-mt.de


    美国授权渠道代表（ATM）


    • 覆盖

    Massachusetts, New Hampshire, Maine, Vermont, Rhode Island, Connecticut, New York, New Jersey, Pennsylvania, Delaware, and Maryland


    • 电话　+1(978) 458-0200


    • 邮箱　atm@atmink.com


    美国授权渠道代表（Cain Forlaw）


    • 覆盖

    Ohio, Indiana, Michigan, Western PA, Illinois, Wisconsin, Minnesota, North Dakota, South Dakota, Nebraska, Iowa, Kansas, Missouri


    • 电话　+1(847) 202-9898


    • 邮箱　sales@cain-forlaw.com


    美国授权渠道代表（Cain Technologies）


    • 覆盖　Southern California


    • 电话　+1(805) 496-9702


    • 邮箱　sales@caintech.com


    美国授权渠道代表（Clearcomm）


    • 覆盖　Florida


    • 电话　+1(256) 721-0500


    • 邮箱　sales@ClearCommSales.com


    美国授权渠道代表（Ion Associates）


    • 覆盖

    All Latin America except for Argentina and Brazil


    • 电话　+52 1 (33) 3122 0639


    • 邮箱　admin@ionassoc.com


    美国授权渠道代表（RFAN）


    • 覆盖

    Northern California and Northern Nevada


    • 电话　+1 (408)752-7000


    • 邮箱　sales@rfan.com


    美国授权渠道代表（Southbridge）


    • 覆盖

    Alabama, Mississippi, Tennessee, Georgia, South Carolina, North Carolina


    • 电话　+1 (256) 325-8926


    • 邮箱　info@southbridge.com


     

    0条提问

    X

    提问

    X

    回答

    暂无视频

     

    0条口碑
    X

    发表口碑

    口碑标题
    上传图片

    ONETEST仪器资源库

    合作与收录

    联系电话：+86-755-23033660

    电子邮箱：info@onetest.cn

    Onetest仪器资源库

    公众号

    Onetest仪器资源库

    视频号

    Onetest仪器资源库

    bilibili

    Onetest仪器资源库

    小助手

    © 2026 Onetest仪器资源库 All Rights Reserved   粤ICP备17028186号-2      粤公网安备44030902003758

    AI问答