ONETEST 欢迎您

厂商登录 | 入驻

登录 | 注册 购物车 微信公众号
仪器资源库

严选商城

搜索

AI问答与智能搜索
二维码
请完成安全验证
产品库 严选商城

    类似产品

    The ALifecom NE6000 是一种用于测试和诊断长期演进（LTE）和LTE-Advanced（LTE-A）通信系统问题的测试系统NE6000模拟完整的LTE-A网络系统NE6000可用于执行与LTE和LTE-A信令相关的各种测试项目并为4G智能终端设备（UE）的开发和调试提供一系列的诊断和故障排除能力NE6000还提供了一个簡洁的选项可用于生产线和质量保证/质量控制（QA/QC）测试
    200、400 或 800 MHz 带宽380 MHz 至 6 GHz 或 7.3 GHz 频率范围IEEE 802.11a/b/g/j/p/n/ac/af/ah/ax、蓝牙 5.1、802.15.4、5G NR、2/3/4G高达 4096QAMMU-MIMO 和 OFDMA，包含每位用户的统计数据和射频性能高达 4x4 MIMO，可扩展至 8x8 MIMO功率、发射频谱模板、频谱平坦度、EVM 测量和分析
    200、400 或 800 MHz 带宽380 MHz 至 6 GHz 或 7.3 GHz 频率范围IEEE 802.11a/b/g/j/p/n/ac/af/ah/ax、蓝牙 5.1、802.15.4、5G NR、2/3/4G高达 4096QAMMU-MIMO 和 OFDMA，包含每位用户的统计数据和射频性能高达 4x4 MIMO，可扩展至 8x8 MIMO功率、发射频谱模板、频谱平坦度、EVM 测量和分析
    1 2

    同厂商产品

    面向 Sub-6GHz 5G 的一体化蜂窝测试仪，200MHz 连续测量带宽、8 个射频端口，支持 3GPP NR 与 V5GTF
    覆盖 400MHz 至 7300MHz、320MHz 以上分析带宽的 Wi-Fi 8/7 测试平台，2/8/16 端口可选，真 MIMO 可扩至 16×16
    面向 PA/FEM 的设计验证方案，残余 EVM
    • «
    • 1

    IQxstream-M 75MHz至6GHz 32端口多待测物蜂窝测试系统|LitePoint (在产)

    75MHz 至 6GHz、32 个射频端口的多待测物蜂窝测试系统，覆盖 2G/3G/4G 与 LTE IoT 三档，内置夹具健康检查

    参考价格 ：

    厂家：LitePoint （收录57个产品）

    产地：美国

    点击访问厂家官网

    产品描述
    详细指标
    软件和手册|白皮书
    购买渠道
    选件
    问大家
    视频
    测评
    口碑
    系统与解决方案

    LitePoint
    IQxstream-M 多待测物蜂窝测试系统
    75MHz至6GHz · 32 个射频端口 · 2G/3G/4G 与 LTE IoT 综测 · 多 DUT 并行
    产品简介
    IQxstream-M 是 IQxstream 家族里偏「产线密度」的一档：一台机箱给 32 个射频端口，多台待测物直接挂上去并行测，不用在机柜里堆功分器和开关矩阵。
    对手机、平板、蜂窝模组这类走量的产品，省下来的不只是仪器钱，还有夹具与布线的调试时间。
    它测的是 2G 到 4G 的全套蜂窝制式，加上 LTE Cat 1 / Cat 0（Cat-M1）/ Cat NB1（NB-IoT）这几档物联网终端。
    判断要不要选 M 这一档，看两件事：产线单站要同时挂几台设备，以及夹具损耗是不是已经吃掉了测量余量——它内置的工厂效率模块（夹具健康检查、DUT 在位检测、回波损耗）就是为后一种情况准备的。
    针对智能手机、平板与蜂窝 IoT 模块产线的多待测物（Multi-DUT）校准与综合测试仪。
    核心参数
    • 频率范围：75MHz至6000MHz（全部端口）
    • 射频端口：32 个（VSG/VSA，BMA 接头）
    • 最大输入功率：+36dBm（峰值包络）
    • 功率测量精度：<±0.4dB（300MHz 至 3.8GHz，电平 > -40dBm）
    • 采样率：61.44Msps
    • 重量：11kg（24 磅）
    功能特性
    • 32 端口直连，免外接功分器：多待测物并行测试直接在机箱端口上完成，机柜里不必再串功分器与开关，插损和失配同时减少。
    • 2G 到 4G 一套硬件打通
    GSM/EDGE、CDMA2000、W-CDMA HSPA/HSPA+、TD-SCDMA、
    LTE TDD/FDD 与 LTE-Advanced 共用同一台仪器。
    • 覆盖 LTE IoT 三档：Cat 1、Cat 0（Cat-M1）、Cat NB1（NB-IoT）都在支持列表里，物联网模组不必另配仪器。
    • 高功率测量精度：VSA 功率精度 <±0.4dB（300MHz 至 3.8GHz），校准精度直接决定产线良率的判定边界。
    • 工厂效率模块：夹具健康检查可分辨 0.05dB 的信号完整性变化，DUT 在位检测与回波损耗测量把夹具故障提前暴露。
    • 测试设置不依赖外部组件：整机内部完成信号生成与分析，测试台架更短，换线更快。
    • 架构可裁剪：单设备、多设备、MIMO 三种用法按需配置硬件模块，不必为用不到的能力付钱。
    • 贴芯片组工具链：与主流芯片组厂商的测试工具配套，LTE IoT 设备的部署可以直接沿用原厂流程。
    应用场景
    • 智能手机与平板产线：多 DUT 并行校准与综测，单站吞吐量由端口数决定而不是靠加仪器。
    • 蜂窝 IoT 模组制造：Cat-M1 与 NB-IoT 的射频校准与发射/接收指标测试。
    • 代工厂多客户混线：同一台仪器覆盖 2G/3G/4G 与 IoT，换产品只需换测试程序。
    • 夹具与测试台维护：用夹具健康检查与回波损耗监测，把「测不准」和「产品坏」区分开。
    • 研发到量产的衔接：研发阶段验证的流程可直接落到产线，不必为量产另写一套。
    • MIMO 与多天线验证：按需配置硬件模块，支持单设备与 MIMO 两类测试形态。
    资源下载
    以上内容与指标均取自LitePoint（莱特波特）（LitePoint）官网该产品详情页与官方产品资料，未标注口径的为厂家公布值。
    LitePoint · onetest 仪器资源库

     

     

    LitePoint
    IQxstream-M 多待测物蜂窝测试系统 详细指标
    75MHz至6GHz · 32 个射频端口 · 2G/3G/4G 与 LTE IoT 综测 · 多 DUT 并行
    详细指标
    指标取自 LitePoint IQxstream-M 技术规格书（PDF）与官网产品页。表中「通用射频」「工厂效率模块」两节为仪器功能项，其余为硬件指标。
    端口说明
    • Power Switch：Power On/Off ｜ Pushbutton Switch
    • Power Indicator：LED Red – Powered Up, Standby LED Green – Powered Up, Running ｜ LED Indicator
    • USB (2)：USB I/O ｜ Type A
    • RF1 Bank 1, RF1 Bank 2：ROUT11 ｜ VSG / VSA Ports ｜ BMA Male
    • RF2 Bank 1, RF2 Bank 2：VSG / VSA Ports ｜ BMA Male
    • RF3 Bank 1, RF3 Bank 2：VSG / VSA Ports ｜ BMA Male
    • RF4 Bank 1, RF4 Bank 2：VSG / VSA Ports ｜ BMA Male
    • RF1 Bank 1, RF1 Bank 2：ROUT12 ｜ VSG / VSA Ports ｜ BMA Male
    • RF2 Bank 1, RF2 Bank 2：VSG / VSA Ports ｜ BMA Male
    • RF3 Bank 1, RF3 Bank 2：VSG / VSA Ports ｜ BMA Male
    • RF4 Bank 1, RF4 Bank 2：VSG / VSA Ports ｜ BMA Male
    • RF1 Bank 1, RF1 Bank 2 (optional)：ROUT13 ｜ VSG / VSA Ports ｜ BMA Male
    • RF2 Bank 1, RF2 Bank 2 (optional)：VSG / VSA Ports ｜ BMA Male
    • RF3 Bank 1, RF3 Bank 2 (optional)：VSG / VSA Ports ｜ BMA Male
    • RF4 Bank 1, RF4 Bank 2 (optional)：VSG / VSA Ports ｜ BMA Male
    • RF1 Bank 1, RF1 Bank 2 (optional)：ROUT14 ｜ VSG / VSA Ports ｜ BMA Male
    • RF2 Bank 1, RF2 Bank 2 (optional)：VSG / VSA Ports ｜ BMA Male
    • RF3 Bank 1, RF3 Bank 2 (optional)：VSG / VSA Ports ｜ BMA Male
    • RF4 Bank 1, RF4 Bank 2 (optional)：VSG / VSA Ports ｜ BMA Male
    • 10 MHz REF In：10 MHz Reference In ｜ BNC female
    • 10 MHz REF Out：10 MHz Reference Out ｜ BNC female
    • TRIG 1：TTL Trigger Input / Output ｜ BNC female
    • TRIG 2：TTL Trigger Input / Output ｜ BNC female
    • TRIG 3：TTL Trigger Input / Output ｜ BNC female
    • TRIG 4：TTL Trigger Input / Output ｜ BNC female
    • VGA：Video Output ｜ 15-Pin DSUB
    • DVI：Video Output ｜ DVI-I
    • USB 1：USB I/O – Keyboard ｜ Type A
    • USB 2：USB I/O – Mouse ｜ Type A
    • LAN：1000 Base-T LAN ｜ RJ-45
    • GPIO：General Purpose I/O ｜ 50-Pin Connector
    通用硬件规格
    • RF Frequency Range：All Ports ｜ 75 MHz to 6000 MHz
    • RF Maximum Input Power：+36 dBm (peak envelope power)1
    • Effective Sample Rate：61.44 Msps
    • Capture Memory Depth：Msamples
    • Measurement Frequency Resolution：0.1 Hz
    • 输入阻抗：50 Ω (nominal)
    • Power Measurement Accuracy2, 3：< ± 1 dB (level > -40 dBm), 75 MHz to 300 MHz < ± 0.4 dB (level > -40 dBm), 300 MHz to <3800 MHz < ± 0.75 dB (level > -40 dBm), 3800 MHz to 6000 MHz
    • Power Measurement Repeatability：< 0.1 dB (within 30 seconds of initial value), signal level > -40 dBm
    • 噪声系数：<30 dB (at MIN attenuation), 300 MHz to <700 MHz <29 dB (at MIN attenuation), 700 MHz to <4000 MHz <40 dB (at MIN attenuation), 4000 MHz to 6000 MHz
    • Signal to Noise Ratio：> 90 dB @ RBW = 1 kHz, input > -10 dBm, 400 MHz to <2000 MHz > 80 dB @ RBW = 1 kHz, input > -10 dBm, 2000 MHz to 6000 MHz
    • 驻波比（typical）：< 1.6 : 1 (RL > 12.5 dB) 400 MHz to < 700 MHz < 1.3 : 1 (RL > 18 dB) 700 MHz to < 2200 MHz < 1.4 : 1 (RL > 16 dB) 2200 MHz to < 3400 MHz < 1.8 : 1 (RL > 11 dB) 3400 MHz to 6000 MHz
    • Port Switching Time4：< 50 µs (to within 0.1 dB)
    • 隔离度：RF1 to RF4 Within a Bank of Ports ｜ Port-to-Port, VSG Duplex Mode > 55 dB (75 MHz to <2400 MHz) > 40 dB (2400 MHz to 6000 MHz)
    • Input third order intercept point (IIP3)：> +40 dBm (at MAX attenuation)
    • Non-harmonic Attenuation：> 50 dB (Input level < +15 dBm)
    • Harmonic Attenuation：> 40 dB (400 MHz to 6000 MHz) > 10 dB (< 400 MHz)
    • 相位噪声：< -108 dBc/Hz @ 900 MHz (250 kHz to 400 kHz offset) < -102 dBc/Hz @ 1800 MHz (250 kHz to 400 kHz offset) < -101 dBc/Hz @ 2400 MHz (250 kHz to 400 kHz offset) < -93 dBc/Hz @ 5800 MHz (250 kHz to 400 kHz offset)
    • RF Frequency Range：All RF Ports ｜ 75 MHz to 6000 MHz
    • RF Output Power Range (Duplex)：-15 dBm to -120 dBm (75 MHz to 3800 MHz)
    • RF Output Power Range (Broadcast)：-12 dBm1 to -120 dBm (400 MHz to 3000 MHz)
    • Center Frequency Resolution：0.1 Hz
    • Power Level Resolution：0.1 dB
    • Power Level Settling Time2：< 50 us to within 0.1 dB
    • Frequency Level Settling Time：< 400 us to within 1 kHz
    • Output Power Accuracy (Duplex & VSG mode)3：< ± 1 dB typical (level > -40 dBm), 75 MHz to <300 MHz ± 0.5 dB (levels ≥ -50 dBm), 300 MHz to <3800 MHz ± 0.75 dB (levels ≥ -50 dBm), 3800 MHz to 6000 MHz
    • Broadcast Mode Output Power Uncertainty：RF1 – RF4, Within a Bank ｜ ± 0.75 dB + VSG Power Accuracy ± 0.25 dB (typical) + VSG Power Accuracy All ports in 50 ohms
    • Power Level Repeatability：All Ports ｜ ± 0.1 dB (within 30 seconds of initial value)
    • Non-harmonic Attenuation：< -32 dBc (output levels < -30 dBm), 400 MHz to 6000 MHz
    • Oscillator Type：OCXO
    • 频率：10 MHz
    • Initial Accuracy (25°C, After 60 Minute Warm-Up)：< ± 0.04 ppm
    • Maximum Aging：< ± 0.1 ppm per year
    • Temperature Stability：< ± 0.05 ppm over 0°C to 50°C range, referenced to 25°C < ± 0.01 ppm over 20°C to 35°C range
    • 预热时间：60 minutes
    通用射频
    • 频率：Sets the VSG center frequency ｜ See General HW Specifications
    • Output Power Level：Sets the VSG output power level ｜ See General HW Specifications
    • 频率：Sets the VSA center frequency ｜ See General HW Specifications
    • Reference Level：Sets the VSA input power range ｜ +36 dBm to -5 dBm
    • Resolution Bandwidth (RBW)：Sets the VSA resolution bandwidth ｜ Hz to 10 MHz
    • 采样率：Sets the VSA sample rate ｜ See General HW Specifications
    • Capture Length：Sets the capture time ｜ See General HW Specifications
    • Trigger Source：Sets the trigger input source ｜ VSG11, VSG12, VSG13, VSG14, EXT1,2,3,4
    • Trigger Level：Sets the RF trigger level ｜ See General HW Specifications
    • Edge Level：Sets rising or falling edge trigger direction
    • Power in Band Table：Integrated power results (up to 10 results)
    • Spectrum (PSD)：Spectrum Display (Power vs. Frequency), Up to 30 MHz span
    • 频率：Frequency ｜ Trigger source
    • Output power level：Reference level (capture range) ｜ Trigger level
    • 采样率：Resolution bandwidth ｜ Edge level
    • Marker Source：Capture length
    • Power meter：Time domain filter bandwidth ｜ Allow user selection of measurement windows from 10 kHz to 30 MHz
    • Power in band table：Displays power by user specified windows (up to 10) within the 30 MHz capture
    • Spectrum：Power vs. frequency for up to a 30 MHz capture
    • Power vs. Time：Display power vs. time. Useful in analysis of signals that exhibit burst behavior.
    工厂效率模块
    • Fixture Health Check：Detects any signal integrity change between the tester and the end of the test fixture that could negatively impact RF measurements
    • DUT Sense：Detects that a DUT has been correctly placed in the test fixture by ensuring that the DUT antenna connection to the tester is of good quality
    • 回波损耗：A magnitude measurement of the reflected signal as seen by the tester RF port
    • Fixture Health Check minimum detectable path change：0.05 dB1
    • Fixture Health Check maximum external pathloss：15 dB
    • Return Loss Magnitude Uncertainty2：<±1 dB, 450 MHz to 4000 MHz, RL > -12 dB
    • 尺寸：14.5” W x 3.2” H x 20.5” D (368 mm x 82 mm x 521 mm)
    • 重量：24 pounds (11 kg)
    • 功耗：< 350 W
    • Average power consumption：< 180 W
    • 工作温度：+10°C to +55°C (IEC EN60068-2-1, 2, 14)
    • 存储温度：-20°C to +70°C (IEC EN60068-2-1, 2, 14)
    • Specification Validity Temperature1：20°C to 35°C
    • Operating / storage humidity：15% to 95% relative humidity, non-condensing (IEC EN60068-2-30)
    • EMC：EN61326-1 Class A, EN55011
    • EMI (Immunity)：EN61000-4
    • 安全：IEC 61010-1, EN61010-1, UL61010-1:2012 and CAN/CSA-C22.2 No. 61010-1-12
    • 机械振动：IEC 60068-2-6 for Sine Vibration and MIL-STD 810G for Random Vibration
    • 机械冲击：ASTM D3332-99
    • 推荐校准周期：24 months
    • 保修：12 months hardware 12 months software updates
    WCDMA/HSPA/HSPA+/Dual Carrier HSPA+ 频段
    • I：1920 - 1980 MHz ｜ 2110 - 2170 MHz
    • II：1850 - 1910 MHz ｜ 1930 - 1990 MHz
    • III：1710 - 1785 MHz ｜ 1805 - 1880 MHz
    • IV：1710 - 1755 MHz ｜ 2110 - 2155 MHz
    • V：824 - 849 MHz ｜ 869 - 894 MHz
    • VI：830 - 840 MHz ｜ 875 - 885 MHz
    • VII：2500 - 2570 MHz ｜ 2620 - 2690 MHz
    • VIII：880 - 915 MHz ｜ 925 - 960 MHz
    • IX：1749.9 - 1784.9 MHz ｜ 1844.9 - 1879.9 MHz
    • X：1710 - 1770 MHz ｜ 2110 - 2170 MHz
    • XI：1427.9 - 1447.9 MHz ｜ 1475.9 - 1495.9 MHz
    • XII：698 - 716 MHz ｜ 728 - 746 MHz
    • XIII：777 - 787 MHz ｜ 746 - 756 MHz
    • XIV：788 - 798 MHz ｜ 758 - 768 MHz
    GSM/EDGE 频段
    • GSM 450 band：460 MHz to 468 MHz ｜ 450 MHz to 458 MHz
    • GSM 480 band：488 MHz to 496 MHz ｜ 478 MHz to 486 MHz
    • GSM 750 band：747 MHz to 762 MHz ｜ 777 MHz to 792 MHz
    • GSM 850 band：869 MHz to 894 MHz ｜ 824 MHz to 849 MHz
    • R-GSM 900 band：921 MHz to 960 MHz ｜ 876 MHz to 915 MHz
    • DCS 1800 band：1805 MHz to 1880 MHz ｜ 1710 MHz to 1785 MHz
    • GSM 1900 band：1930 MHz to 1990 MHz ｜ 1850 MHz to 1910 MHz
    GSM/EDGE Tests
    • TX output power：13.3, 13.17.3
    • Transmit burst timing：13.3, 13.17.3
    • 频率误差：13.1, 13.17.1
    • Phase error：13.1, 13.17.1
    • Error Vector Magnitude (8-PSK)：13.17.1
    • Origin offset suppression：13.17.1 ｜ I/Q Mismatch, I/Q Offset
    • Output RF spectrum due to modulation (M-ORFS)：13.4, 13.17.4
    • Output RF spectrum due to switching (S-ORFS)：13.4, 13.17.4
    • 参考灵敏度：14.2 ｜ DUT support required
    • Usable input level range：14.3 ｜ DUT support required
    • 接收电平：DUT support required. A common test as part of device calibration / verification
    cdma2000 / 1xEV-DO Tests
    • 最大输出功率：4.4.5 ｜ 4.3.4
    • 频率准确度：4.3.4 ｜ 4.2.2
    • EVM：Available but not part of standards for cdma2000
    • Rho(p)：4.3.4 ｜ 4.2.2
    • Code domain power：4.3.5 ｜ 4.3.8
    • ACLR：Available but not part of standards for cdma2000. Faster than the Conducted Spurious Emissions Test.
    • Receiver sensitivity：3.5.1 ｜ 3.3.1 ｜ DUT support required
    • RX dynamic range：3.5.1 ｜ 3.3.1 ｜ DUT support required
    • 接收电平：DUT support required. A common test as part of device calibration / verification.
    Wireless LAN (802.11 a/b/g/n/j/p) 测量规格
    • EVM（2.4 GHz band）：EVM averaged over payload based on standard requirements
    • EVM（5 GHz band）：EVM averaged over payload based on standard requirements
    • Peak power：Peak power over all symbols (dBm) ｜ VSA power accuracy: ± 0.4 dB (+20 to -35 dBm)
    • RMS power：All: average power of complete data capture (dBm)
    • Max avg power：Peak value of the amplitude as a moving average over 40 samples (dBm)
    • I/Q amplitude error：I/Q amplitude imbalance (%) and approximate contribution to EVM (dB) ｜ Residual VSA I/Q imbalance: ≤ 1% (+20 to -35 dBm) Residual VSG I/Q imbalance: ≤ 1% (-5 to -70 dBm)
    • I/Q phase error：I/Q phase imbalance (degrees) and approximate contribution to EVM (dB) ｜ Residual VSA I/Q imbalance: ≤ 0.5 degree (+20 to -35 dBm) Residual VSG I/Q imbalance: ≤ 0.5 degree (-5 to -70 dBm)
    • 频率误差：Carrier frequency error (kHz) ｜ (For 802.11n packet at 16 symbols, EVM better than -25 dB) VSA measurement error: ≤ ± 0.2 ppm calibrated
    • RMS phase noise：Integrated phase noise (degrees) ｜ VSA integrated phase noise: < TBD degrees (100 Hz to 1 MHz)
    • PSD：Power spectral density (dBm/Hz) versus frequency offset center frequency ± 20 MHz
    • Spectral mask：Transmit spectrum mask ｜ Spectral mask view: ± 20 MHz
    • 频谱平坦度：Reflects variation of signal energy as a function of OFDM subcarrier number 802.11a/g/p/n/j OFDM signals only ｜ VSA flatness over ≤ 40 MHz Ch BW: 1 dB (MAX – MIN)
    • Sidelobe analysis (spectral mask, LO leakage)：Center peak and peaks of 1st and 2nd upper/lower sidelobes (dB) 802.11b/g DSSS signals only
    • CCDF（complementary cumulative distribution function）：Probability of peak signal power being greater than a given power level versus peak-to-average power ratio (dB)
    • Eye diagram：I and Q channels versus time (802.11b/g DSSS signals only)
    • PSDU data：Recovered binary data sequence, including the MAC header and Frame Check Sequence, if present
    • Raw capture data：I and Q signals versus time
    • General waveform analysis：DC offset, RMS level, minimum / maximum amplitude, peak-to-peak amplitude, RMS I- and Q-channel levels
    • CW frequency analysis：Frequency of CW tone
    Bluetooth (1.0, 2.0, 2.1, 3.0) 测量规格
    • TX output power：Transmit DUT output power (dBm) ｜ VSA power accuracy: ± 0.4 dB (+20 to -35 dBm)
    • TX output spectrum：Transmit DUT power spectral density
    • 20 dB bandwidth：Bandwidth between the ± 20 dB down points of the modulation waveform ｜ VSA frequency accuracy: ≤ ± 0.2 ppm calibrated
    • In-band emissions (Adjacent channel)：Spurious emission measured at ± 5 MHz of DUT TX frequency only ｜ VSA spurious: < -50 dBc (50 kHz RBW) (CW)
    • 调制特性：Average and peak frequency deviation (Hz) ｜ (For EVM better than -25 dB) VSA measurement error: ≤ ± 0.2 ppm calibrated
    • Carrier frequency tolerance：Carrier frequency offset (Hz)
    • Carrier frequency drift：Carrier frequency change over the Bluetooth burst (Hz)
    • Relative transmit power (EDR)：Average power of complete data capture (dBm) ｜ VSA power accuracy: ± 0.4 dB (+20 to -35 dBm)
    • Receive sensitivity1：Receive sensitivity test using LitePoint or user-generated waveforms. Includes Dirty Packets. ｜ VSG power accuracy: ± 0. 5 dB (+ 5 to -95 dBm)
    • 最大输入信号电平：Assuming single-ended BER measurement
    • RMS EVM (EDR)：RMS EVM for Bluetooth EDR ｜ Residual VSA EVM: ≤ -35 dB (+20 to -25 dBm) Residual VSG EVM: ≤ -35 dB (-5 to -70 dBm)
    • Peak EVM (EDR)：Peak EVM for Bluetooth EDR
    Bluetooth (4.0) 测量规格
    • Output power at NOC1：VSA power accuracy: ± 0.4 dB (+20 to -35 dBm)
    • In-band emissions at NOC1：Spurious emission measured at ± 5 MHz of DUT TX frequency only ｜ VSA spurious: < -50 dBc (50 kHz RBW) (CW)
    • 调制特性：Average and peak frequency deviation (Hz) ｜ VSA frequency accuracy: ≤ ± 0.2 ppm calibrated
    • Carrier frequency offset and drift at NOC1：Carrier frequency offset (Hz) and change over the Bluetooth burst (Hz)
    • Receiver sensitivity at NOC1,2：Receive sensitivity test using LitePoint or user-generated waveforms ｜ VSA power accuracy: ± 0.4 dB (+20 to -35 dBm)
    • C/I and receiver selectivity performance3：VSA spurious: < -50 dBc (50 kHz RBW) (CW)
    • 最大输入信号电平：Assuming single-ended BER measurement ｜ VSG maximum output power: -15 to -120 dBm CW
    • PER report integrity：Verifies the DUT PER report mechanism
    IQxstream-M is capable of testing for these new requirements
    • In-band emissions：Spurious emission measured at ± 5 MHz of DUT TX frequency only. Tested at 1 Mbps, 2 Mbps ｜ VSA spurious: < -50 dBc (50 kHz RBW) (CW)
    • 调制特性：Average and peak frequency deviation (Hz). Tested at 1 Mbps, 2 Mbps, 125 kbps ｜ VSA frequency accuracy: ≤ ± 0.2 ppm calibrated
    • Carrier Frequency offset and drift：Carrier frequency offset (Hz) and change over the Bluetooth burst (Hz). Tested at 1 Mbps, 2 Mbps, 125 kbps
    • Stable Modulation Characteristics：Tested at 1 Mbps, 2 Mbps ｜ VSA frequency accuracy: ≤ ± 0.2 ppm calibrated
    • Receiver Sensitivity：Receive sensitivity test using LitePoint or user-generated waveforms. Tested at 1 Mbps, 2 Mbps, 125 kbps ｜ VSG power accuracy: ± 0.75 dB (-50 to -100 dBm)
    • Receiver Sensitivity – Stable Modulation Index：Tested at 1 Mbps, 2 Mbps, 500 kbps, 125 kbps
    • 最大输入信号电平：Assuming single-ended BER measurement. Tested at 1 Mbps, 2 Mbps ｜ VSG maximum output power: -15 dBm
    • Maximum Input signal level – Stable Modulation Index：Tested at 1 Mbps, 2 Mbps
    • C/I and Receiver Selectivity Performance：Tested at 1 Mbps, 2 Mbps, 500 kbps, 125 kbps ｜ VSA spurious: < -50 dBc (50 kHz RBW) (CW)
    • Blocking Performance：Tested at 1 Mbps, 2 Mbps
    • Intermodulation Performance：Tested at 1 Mbps, 2 Mbps
    • PER Report Integrity：Verifies the DUT PER report mechanism. Tested at 1 Mbps, 2 Mbps,500 kbps, 125 kbps
    ZigBee (802.15.4) 测量规格
    • 输出功率：Transmit DUT output power (dBm) ｜ VSA power accuracy: ± 0.4 dB (+20 to -35 dBm)
    • Power spectral density：Transmit DUT power spectral density
    • Center Frequency Tolerance：Tx center frequency tolerance ｜ VSA frequency accuracy: ≤ ± 0.2 ppm calibrated
    • EVM：Offset: compensate the I and Q offset in OQPSK Normal: no compensation applied
    • Other modulation quality measurements：LO leakage, clock error, phase error, symbol clock error
    • CCDF（complementary cumulative distribution function）：Probability of peak signal power being greater than a given power level versus peak-to-average power ratio (dB)
    DECT (ETSI EN 300 176-1) 测量规格
    • 功率：Normal Transmit Power ｜ VSA power accuracy: ± 0.4 dB (+20 to -35 dBm)
    • Power vs. time：Power time template
    • Frequency offset：Frequency offset ｜ VSA frequency accuracy: ≤ ± 0.2 ppm calibrated
    • Frequency drift：Frequency drift during packet transmission
    • Frequency deviation：S field, B field, whole packet
    MIMO 系统性能
    • VSA capture trigger accuracy：≤ ± 3.5 ns
    • VSA start trigger accuracy：≤ ± 3.5 ns
    资源下载
    以上规格取自 LitePoint 官方技术规格书（PDF）与官网产品页；标注「典型」的为厂家典型值。
    LitePoint · onetest 仪器资源库

    全部

     

    LitePoint官方渠道


    官方渠道（官网 / 热线 / 邮箱）


    • 官网　www.litepoint.com


    • 联系方式与销售咨询

    www.litepoint.com/about/contact-us


    • 技术支持与服务　www.litepoint.com/support


    • 全球总部

    90 Headquarters Drive, San Jose, CA 95134, USA


    • 总部电话　+1.408.456.5000


    全国办事处


    中国区办事处（上海）


    • 地址

    Building 10 2nd Fl，1201 Gui Qiao Rd，Jin Qiao Export Processing Zone，Pudong, Shanghai，China Post Code 201206


    • 电话　+86.21.6168.0810


    • 传真　+86.21.6168.0809


    中国区办事处（深圳）


    • 地址

    Room G-I, 6F, K-building，No.28 Keji South Road 12th，Nanshan District, Shenzhen 518057, P.R.C.


    • 电话　+86.755.3391.0588


    • 传真　+86.755.3391.0586


    海外办事处（亚太 / 美洲 / 欧洲·中东·非洲）


    • LitePoint Technology, Ltd.：Taiwan，4F, No. 360, Ruiguang Road，Taipei 114, Taiwan；电话：+886.2.8979.1789；备用电话：0809.080.360；传真：+886.2.7745.5298


    • LitePoint Japan, Teradyne K.K.：Japan，7F MM park Building，3-6-3, Minatomirai, Nishi-ku，Yokohama, 220-0012，Japan；电话：+81 45 414 3641


    • LitePoint Vietnam Limited：Unit 401, HITC building, No. 239，Xuan Thuy street, Cau Giay，Hanoi, Vietnam；电话：+84.243.204.8288


    • Teradyne/LitePoint Illinois：21440 W. Lake Cook Road, 6th Floor，Deer Park, Illinois 60010；电话：+1.408.456.5000


    • LitePoint Southern California：10509 Vista Sorrento Pkwy., Suite 116，San Diego, CA 92121 USA；电话：+1.408.456.5000


    • LitePoint Denmark

    Alfred Nobels Vej 27, 3. 9220，Aalborg Øst, Denmark；电话：+45.48.10.70.70；传真：+45.48.10.70.80


    • LitePoint Israel

    Sironit st，Building #18 MATAM，Haifa 3508409, Israel；电话：+972.4.911.2288；传真：+972.4.911.2290


    授权分销商


    中国区授权分销商（Shanghai Qianpuyang Technology Co., Ltd）


    • 地址

    Room 3006, 158 Yixian Road，Hongkou District, Shanghai, China


    • 电话　+86 13681973678


    中国区授权分销商（Shenzhen Jinghongzhi Instrument Co.,Ltd）


    • 地址

    22F IMT Tower, No. 1, Gaoxin South 7th Avenue，Nanshan District, Shenzhen, Guangdong, China


    • 电话　86-0755-84365666


    亚太授权分销商（ACE Solution Co., Ltd.，中国台湾）


    • 地址

    Taiwan，2F-1. No. 28, Taiyuan St.，Jhubei City, Hsinchu 302, Taiwan


    • 电话　+886.3.552.5633


    • 传真　+886.3.553.5610


    亚太授权分销商（ATE Service Corporation，Japan）


    • 地址

    Japan，5-6-23 Minamimachida, Machida-shi，Tokyo 194-0005, Japan


    • 电话　+81.42.795.8600


    • 传真　+81.42.795.8615


    亚太授权分销商（Crezon Technology，Korea）


    • 地址

    Korea，1209, 388, Dunchon-daero，Jungwon-gu, Seongnam-si，Gyeonggi-do, Republic of Korea


    • 电话　+82.31.777.8949


    • 传真　+82.31.777.8945


    亚太授权分销商（Hakuto Co., Ltd.，Japan）


    • 地址

    Japan，1-1-13 Shinjuku，Shinjuku-Ku Tokyo, 160-8910 Japan


    • 电话　+81.3.3355.7643


    • 传真　+81.3.3355.7693


    亚太授权分销商（Innovsys Technologies Pte., Ltd.，Singapore）


    • 地址

    Singapore，111 North Bridge Road，#27-01 Peninsula Plaza，Singapore 179098


    • 电话　+65.6389.1700


    • 传真　+65.6389.1701


    亚太授权分销商（SIP Technology (M) SDN BHD，Malaysia）


    • 地址

    Malaysia，36 Lorong IKS Bukit Tengah，Taman IKS Bukit Tengah 14000，Penang Malaysia


    • 电话　+604 508 8318


    亚太授权分销商（Premier Measurement Solutions Pvt., Ltd.，India）


    • 地址

    India，403, Sobha Amber, Jakkur Plantation，Yelahanka Bangalore, 560 064, India


    • 电话　+91.98451.03198


    美洲授权分销商（Starvoy）


    • 地址

    Canada，4017 Carling Ave., Suite 101，Ottawa, Ontario K2K 2A3，Canada


    • 电话　+1 (613) 592-8910


    • 邮箱　sales@starvoy.com


    • 网址　www.starvoy.com


    美洲授权分销商（WD Tech）


    • 地址　Argentina and Brazil


    • 电话　+55 (92) 98450-9454


    • 邮箱

    rework-smartservice@smartservice-group.com


    欧洲 / 中东 / 非洲授权分销商（Equipements Scientifiques S.A.）


    • 地址

    France，127 rue de Buzenval，92380 Garches, France


    • 电话　+33 0147959900


    • 传真　+33 0147011622


    • 网址　www.es-france.com


    欧洲 / 中东 / 非洲授权分销商（AlfaTest SRL）


    • 地址

    Cermena 22，300110 Timisoara，Romania


    • 电话　+40 356401687


    • 邮箱　office@alfatest.ro


    • 网址　www.alfatest.ro


    欧洲 / 中东 / 非洲授权分销商（mmt gmbh | Meffert Microwave Technology）


    • 地址

    Germany，mmt gmbh | Meffert Microwave Technology，Im Kohlgarten 14，56414 Steinefrenz，Germany


    • 电话　+49 6435 303 9820-20


    • 网址　https://www.meffert-mt.de/


    • 邮箱　sales@meffert-mt.de


    美国授权渠道代表（ATM）


    • 覆盖

    Massachusetts, New Hampshire, Maine, Vermont, Rhode Island, Connecticut, New York, New Jersey, Pennsylvania, Delaware, and Maryland


    • 电话　+1(978) 458-0200


    • 邮箱　atm@atmink.com


    美国授权渠道代表（Cain Forlaw）


    • 覆盖

    Ohio, Indiana, Michigan, Western PA, Illinois, Wisconsin, Minnesota, North Dakota, South Dakota, Nebraska, Iowa, Kansas, Missouri


    • 电话　+1(847) 202-9898


    • 邮箱　sales@cain-forlaw.com


    美国授权渠道代表（Cain Technologies）


    • 覆盖　Southern California


    • 电话　+1(805) 496-9702


    • 邮箱　sales@caintech.com


    美国授权渠道代表（Clearcomm）


    • 覆盖　Florida


    • 电话　+1(256) 721-0500


    • 邮箱　sales@ClearCommSales.com


    美国授权渠道代表（Ion Associates）


    • 覆盖

    All Latin America except for Argentina and Brazil


    • 电话　+52 1 (33) 3122 0639


    • 邮箱　admin@ionassoc.com


    美国授权渠道代表（RFAN）


    • 覆盖

    Northern California and Northern Nevada


    • 电话　+1 (408)752-7000


    • 邮箱　sales@rfan.com


    美国授权渠道代表（Southbridge）


    • 覆盖

    Alabama, Mississippi, Tennessee, Georgia, South Carolina, North Carolina


    • 电话　+1 (256) 325-8926


    • 邮箱　info@southbridge.com


     

    0条提问

    X

    提问

    X

    回答

    暂无视频

     

    0条口碑
    X

    发表口碑

    口碑标题
    上传图片

    ONETEST仪器资源库

    合作与收录

    联系电话：+86-755-23033660

    电子邮箱：info@onetest.cn

    Onetest仪器资源库

    公众号

    Onetest仪器资源库

    视频号

    Onetest仪器资源库

    bilibili

    Onetest仪器资源库

    小助手

    © 2026 Onetest仪器资源库 All Rights Reserved   粤ICP备17028186号-2      粤公网安备44030902003758

    AI问答