是德科技 | KEYSIGHT
XA3系列N9021B 信号分析仪,10Hz至8.4/13.6/26.5/32/44/50GHz 详细指标
台式信号与频谱分析仪
Option 508
10 Hz to 8.4 GHz
Option 513
10 Hz to 13.6 GHz
Option 526
10 Hz to 26.5 GHz
Option 532
10 Hz to 32 GHz
Option 544
10 Hz to 44 GHz
Option 550
10 Hz to 50 GHz
Band LO Multiple (N) Swept or FFT, with FFT width ≤ 40 MHz FFT, with FFT width >
40 MHz
0 1 10 Hz to 3.6 GHz
10 Hz – 3.4 GHz
1 1 3.5 to 8.4 GHz
3.4 – 8.2 GHz
2 2 8.3 to 13.6 GHz
8.2 – 13.2 GHz
3 2 13.5 to 17.1 GHz
13.2 – 17.1 GHz
4 4 17.0 to 26.5 GHz
17.1 – 26.5 GHz
5 4 26.4 to 34.5 GHz
26.5 – 34.5 GHz
6 8 34.4 to 50 GHz
34.5 – 50 GHz
条件:Residual FM ( with option PFR) ≤ (0.25 Hz × N)p-p in 20 ms (nominal)
Residual FM ( Standard) ≤ (10 Hz × N)p-p in 20 ms (nominal)
Accuracy ± [(time since last adjustment x aging rate) + temperature stability + calibration accuracy]
Aging rate Option PFR Standard ± 1 × 10 -7 / year ± 1 × 10 -6 / year ± 1.5 × 10
-7 / 2 years
Temperature stability Option PFR Standard 20 to 30 °C ± 1.5 × 10 -8 ± 2 × 10
-6
Full temperature range ± 5 × 10 -8 ± 2 × 10
-6
Achievable initial calibration accuracy Option PFR Standard ± 4 × 10 -8 ± 1.4 × 10
-6
Frequency readout accuracy (start, stop, center, marker) ± (marker frequency x frequency reference accuracy + 0.25 % x span + 5 % x RBW + 2 Hz +
0.5 x horizontal resolution1)
Accuracy ± (marker frequency x frequency reference accuracy +
0.100 Hz)
Delta counter accuracy ± (delta frequency x frequency reference accuracy +
0.141 Hz)
Counter resolution
0.001 Hz
Range 0 Hz (zero span)
10 Hz to maximum frequency of instrument
条件:1. Horizontal resolution is span / (sweep points – 1).
1. Analysis bandwidth is the instantaneous bandwidth available around a center frequency over which the input signal can be digi tized
Stepped/Swept ± (0.25 % x span + horizontal resolution)
FFT ± (0.1% x span + horizontal resolution)
for further analysis or processing in the time, frequency, or modulation domain
条件:Accuracy Span = 0 Hz, swept ± 0.01 % (nominal)
Span ≥ 10 Hz, FFT ± 40 % (nominal)
Range Span = 0 Hz
1 µs to 6000 s
Span ≥ 10 Hz
1 ms to 4000 s
Span = 0 Hz
± 0.01 % (nominal)
Trigger Free run, line, video, external 1, external
2, RF burst, periodic timer
Trigger delay Span = 0 or FFT
-150 to +500 ms
Span ≥ 10 Hz, swept
0 µs to 500 ms
Gate methods Gated LO; gated video; gated FFT
条件:Gate delay jitter 33.3 ns p-p (nominal)
Gate length range
100.0 ns to 5.0 s (Except method = FFT)
Gate delay range
0 to 100.0 s
条件:With option B2X/B5X and Option RBE 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 100, 133, 150, 200,
Bandwidth accuracy (power) 1 Hz to 750 kHz ± 1.0 % (± 0.044 dB) 820 kHz to 1.2 MHz (< 3.6 GHz CF) ± 2.0 % (± 0.088 dB) 1.3 to 2 MHz (< 3.6 GHz CF) ± 0.07 dB (nominal)
2.2 to 3 MHz (< 3.6 GHz CF) ± 0.15 dB (nominal)
4 to 8 MHz (< 3.6 GHz CF) ± 0.25 dB (nominal)
Bandwidth accuracy (-3 dB) 1 Hz to 1.3 MHz ± 2% (nominal)
Selectivity (-60 dB/-3 dB) 4.1: 1 (nominal)
EMI bandwidths (CISPR compliant) 200 Hz, 9 kHz, 120 kHz
1 MHz
EMI bandwidths (Mil STD 461 compliant) 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz
1 MHz
Range (with -3 dB bandwidth, standard) 1 Hz to 3 MHz (10% steps), 4, 5, 6
8 MHz
and 212 MHz, in spectrum analyzer mode and zero span
Range 1 Hz to 3 MHz (10% steps), 4, 5,6, 8 MHz, and wide open (labeled
50 MHz)
Maximum bandwidth Option B2X
255 MHz
条件:Gain 100 kHz to 3.6 GHz +20 dB nominal
3.6 to 26.5 GHz +35 dB, nominal
Noise figure 100 kHz to 3.6 GHz 11 dB, nominal
13.6 to 50 GHz DANL + 176.24 dB, nominal
1. Frequency range of option EA3 varies according to sweep types. Please refer to the frequency band definition on page 4.
Frequency range Option P08
100 kHz to 8.4 GHz
Option P13
100 kHz to 13.6 GHz
Option P26
100 kHz to 26.5 GHz
Option P32
100 kHz to 32 GHz
Option P44
100 kHz to 44 GHz
Option P50
100 kHz to 50 GHz
26.5 to 50 GHz
+40 dB, nominal
3.6 to 8.4 GHz
9 dB, nominal
8.4 to 13.6 GHz
10 dB, nominal
Measurement range Preamp Off Displayed average noise level (DANL) to +30 dBm
Preamp On Displayed average noise level (DANL) to +20 dBm
Input attenuator range
0 to 70 dB in 2 dB steps
Average total power
+30 dBm (1 W)
Peak pulse power +50 dBm (100 W) < 10 µs pulse width, < 1% duty cycle, and input attenuation ≥
30 dB
Log scale
0.1 to 1 dB/division in 0.1 dB steps
1 to 20 dB/division in 1 dB steps (10 display divisions)
Scale units dBm, dBmV, dBμV, dBmA, dBμA, V, W, A, dBuV/m, dBuA/m, dBpT, dBG, dBpW
Electronic attenuator (option EA3)
Frequency range
10 Hz to 3.6 GHz1
Electronic attenuator range 0 to 24 dB
1 dB steps
Full attenuation range 0 to 94 dB
1 dB steps (Mechanical + Electronic)
Frequency response Specification
95th percentile
20 to 30°, preselector centering
Preamp Off 20 Hz to 10 MHz ±0.50 dB ±0.43 dB ±0.25 dB
±0.23 dB
10 dB attenuation 10 to 50 MHz ±0.40 dB ±0.43 dB ±0.20 dB
±0.21 dB
50 to 3.6 GHz ±0.50 dB ±0.36 dB ±0.25 dB
±0.22 dB
3.5 to 5.2 GHz ±1.50 dB ±1.5 dB ±0.65 dB
±0.76 dB
5.2 to 8.4 GHz ±1.50 dB ±1.3 dB ±0.60 dB
±0.56 dB
8.3 to 13.6 GHz ±2.00 dB ±1.8 dB ±0.60 dB
±0.67 dB
13.5 to 17.1 GHz ±2.00 dB ±1.8 dB ±0.65 dB
±0.62 dB
17.0 to 22.0 GHz ±2.00 dB ±1.8 dB ±0.65 dB
±0.73 dB
22.0 to 26.5 GHz ±2.50 dB ±2.3 dB ±0.85 dB
±0.76 dB
26.4 to 34.5 GHz ±2.3 dB
±0.82 dB
34.4 to 50 GHz ±3.0 dB
±1.21 dB
Preamp On 100 kHz to 50 MHz ±0.70 dB ±0.7 dB ±0.30 dB
±0.31 dB
0 dB attenuation 50 MHz to 3.6 GHz ±0.60 dB ±0.55 dB ±0.50 dB
±0.25 dB
3.5 to 5.2 GHz ±2.00 dB ±1.8 dB ±0.70 dB
±0.78 dB
5.2 to 8.4 GHz ±2.00 dB ±1.8 dB ±0.65 dB
±0.63 dB
8.3 to 13.6 GHz ±2.30 dB ±2.1 dB ±0.60 dB
±0.51 dB
13.5 to 17.1 GHz ±2.50 dB ±2.3 dB ±0.80 dB
±0.8 dB
17.0 to 22.0 GHz ±2.90 dB ±2.6 dB ±0.85 dB
±0.94 dB
22 to 26.5 GHz ±3.50 dB ±3.3 dB ±1.10 dB
±0.96 dB
26.4 to 34.5 GHz ±2.8 dB
±1.04 dB
34.4 to 50 GHz ±3.9 dB
±1.37 dB
条件:20 Hz to 3.6 GHz ± 0.3 dB, nominal
3.5 to 8.4 GHz ± 0.5 dB, nominal
8.3 to 13.6 GHz ± 0.7 dB, nominal
13.5 to 26.5 GHz ± 0.7 dB, nominal
26.4 to 50 GHz ± 1.0 dB, nominal
Total absolute amplitude accuracy 10 dB attenuation, 20 to 30 °C, 1 Hz ≤ RBW ≤ 1 MHz, input signal –10 to –50 dBm, RF preselector Off, Preamp Off and On, all settings auto-coupled except Auto Swp Time = Accy, any reference level, any scale, σ = nominal standard deviation)
Preamp Off Specification 95% percentile AutoAlign = Light, nominal
Attenuation >
2 dB, Preamp off, Relative to 10 dB, all frequency options
50 MHz (ref frequency) ± 0.20 dB
± 0.08 dB, typical
At 50 MHz ± 0.45 dB ± 0.19 dB
± 0.27 dB
At all frequencies ± (0.45 dB + freq response) ± (0.19 dB + freq response@
95%
percentile) ± (0.27 dB + freq response@
95% percentile)
Preamp On, at all frequencies ± (0.49 dB + freq response) ± (0.3 dB + freq response@
95% percentile)
Input voltage standing wave ratio (VSWR) Option 508/513/526 Option
532/544/550
Preamp Off, 10 MHz to 3.6 GHz 1.140
1.125
Input atten 10 dB, 3.5 to 8.4 GHz 1.230
1.162
95% percentile 8.3 to 13.6 GHz 1.387
1.217
13.5 to 17.1 GHz 1.542
1.262
17.0 to 26.5 GHz 1.671
1.319
Preamp On, 10 MHz to 3.6 GHz 1.499
1.386
Input atten 0 dB, 3.5 to 8.4 GHz 1.516
1.539
95% percentile 8.3 to 13.6 GHz 1.623
1.385
13.5 to 17.1 GHz 1.634
1.345
17.0 to 26.5 GHz 1.785
1.372
RBW switching uncertainty (reference to 30 kHz RBW)
1 Hz to 1.5 MHz RBW
± 0.05 dB
1.6 to 3 MHz RBW
± 0.10 dB
4, 5, 6, 8 MHz RBW
± 1.0 dB
Range Log scale
–170 to +30 dBm in 0.01 dB steps
Linear scale Same as log (707 pV to 7.07 V)
Switching between linear and log
0 dB
Log scale/div switching
0 dB
-10 dBm < mixer level < -80 dBm
± 0.10 dB total
Normal, peak, sample, negative peak, log power average, RMS average, and voltage average
条件:Preamp Off 20 MHz to 3.6 GHz +4 dBm, typical +5 dBm, nominal
3.6 to 16 GHz +9 dBm, typical +8 dBm, nominal
16 to 26.5 GHz +8 dBm, typical +7 dBm, nominal
Preamp On 10 MHz to 3.6 GHz -14 dBm, nominal -14 dBm, nominal
Tone spacing 100 kHz to 20 MHz -28 dBm, nominal -28 dBm, nominal
Tone spacing > 70 MHz -20 dBm, nominal -20 dBm, nominal
26.5 to 50 GHz -30 dBm, nominal
1 dB gain compression (two-tone) Option 508/513/526 Option
532/544/550
(At 1 kHz RBW with 100 kHz tone spacing
20 to 30 °C)
26.5 to 50 GHz
0 dBm, nominal
3.6 to 26.5 GHz
条件:10 Hz -123 dBm, nominal -123 dBm, nominal
20 Hz -129 dBm, nominal -129 dBm, nominal
100 Hz -126 dBm, nominal -126 dBm, nominal
1 kHz -146 dBm, nominal -146 dBm, nominal
Input terminated, 1 Hz RBW, sample or average detector, averaging type = Log, 0 dB input attenuation, IF Gain =High
20 to 30 °C
Preamp Off Option 508/513/526 Option
532/544/550
9 kHz to 5 MHz -147 dBm, typical
-147 dBm, typical
5 to 10 MHz -158 dBm, -159 dBm, typical -155 dBm
-158 dBm, typical
10 MHz to 1.2 GHz -157 dBm, -158 dBm, typical -154 dBm
-157 dBm, typical
1.2 to 2.1 GHz -155 dBm, -156 dBm, typical -152 dBm
-155 dBm, typical
2.1 to 3 GHz -153 dBm, -154 dBm, typical -151 dBm
-154 dBm, typical
3 to 3.6 GHz -150 dBm, -151 dBm, typical -150 dBm
-153 dBm, typical
3.5 to 4.2 GHz -149 dBm, -150 dBm, typical -143 dBm
-147 dBm, typical
4.2 to 6.6 GHz -151 dBm, -152 dBm, typical -144 dBm
-148 dBm, typical
6.6 to 8.4 GHz -152 dBm, -152 dBm, typical -147 dBm
-149 dBm, typical
8.3 to 13.6 GHz -151 dBm, -152 dBm, typical -147 dBm
-149 dBm, typical
13.5 to 14 GHz -149 dBm, -150 dBm, typical -143 dBm
-147 dBm, typical
14 to 17.1 GHz -147 dBm, -149 dBm, typical -145 dBm
-148 dBm, typical
17 to 22.5 GHz -145 dBm, -146 dBm, typical -145 dBm
-146 dBm, typical
22.5 to 26.5 GHz -136 dBm, -139 dBm, typical -139 dBm
-143 dBm, typical
26.4 to 30 GHz -140 dBm
-143 dBm, typical
30 to 34.5 GHz -138 dBm
-143 dBm, typical
34.5 to 37 GHz -134 dBm
-139 dBm, typical
37 to 40 GHz -132 dBm
-138 dBm, typical
40 to 49 GHz -130 dBm
-136 dBm, typical
49 to 50 GHz -128 dBm
-135 dBm, typical
条件:100 kHz to 5 MHz -159 dBm, nominal -159 dBm, nominal
Preamp On Option 508/513/526 Option
532/544/550
5 to 10 MHz -166 dBm, -167 dBm, typical -163 dBm
-167 dBm, typical
10 MHz to 1.2 GHz -166 dBm, -167 dBm, typical -164 dBm
-166 dBm, typical
1.2 to 2.1 GHz -164 dBm, -165 dBm, typical -163 dBm
-165 dBm, typical
2.1 to 3.6 GHz -163 dBm, -164 dBm, typical -162 dBm
-164 dBm, typical
3.5 to 8.4 GHz -163 dBm, -164 dBm, typical -158 dBm
-161 dBm, typical
8.3 to 13.6 GHz -164 dBm, -165 dBm, typical -160 dBm
-162 dBm, typical
13.5 to 17.1 GHz -161 dBm, -162 dBm, typical -161 dBm
-163 dBm, typical
17 to 20 GHz -159 dBm, -161 dBm, typical -160 dBm
-162 dBm, typical
20 to 26.5 GHz -156 dBm, -158 dBm, typical -158 dBm
-160 dBm, typical
26.4 to 30 GHz -157 dBm
-159 dBm, typical
30 to 34.5 GHz -155 dBm
-158 dBm, typical
34.5 to 37 GHz -153 dBm
-157 dBm, typical
37 to 40 GHz -152 dBm
-155 dBm, typical
40 to 44 GHz -149 dBm
-154 dBm, typical
44 to 46 GHz -149 dBm
-154 dBm, typical
46 to 50 GHz -146 dBm
-151 dBm, typical
DANL with noise floor extension (option NF2)
95th percentile
DANL improvement exceeds
7 dB with 95% confidence in the avg of all bands, frequency options and signal path
条件:Residual responses 200 kHz to 8.4 GHz (swept) -100 dBm nominal
Zero span or FFT or other frequencies -100 dBm nominal
Opt. 508/513/526 Opt. 532/544/550 Opt.508/513/526 Opt.
532/544/550
f > 20 MHz 10 Hz to 3.5 GHz -162 dBm -163 dBm -174 dBm
-174 dBm
1 3.5 to 8.4 GHz -164 dBm -159 dBm -174 dBm
-172 dBm
2 8.3 to 13.6 GHz -164 dBm -159 dBm -174 dBm
-172 dBm
3 13.5 to 17.1 GHz -158 dBm -159 dBm -174 dBm
-173 dBm
4 17.0 to 26.5 GHz -152 dBm -154 dBm -167 dBm
-169 dBm
5 26.4 to 34.5 GHz -153 dBm
-167 dBm
6 34.4 to 50 GHz -144dBm
-158 dBm Spurious response
条件:Mixer level -30 dBm 42 to 50 GHz f ± 645 MHz -75 dBc nominal
1. N is the LO multiplication factor. Refer to page 4 for the N value verses frequency ranges.
Mixer level -10 dBm 10 MHz to 26.5 GHz f ± 45 MHz
-103 dBc typ.
Mixer level -10 dBm 10 MHz to 3.6 GHz f ± 10245 MHz
-107 dBc typ.
Mixer level -10 dBm 10 MHz to 3.6 GHz f ± 645 MHz
-108 dBc typ.
Mixer level -10 dBm 3.5 to 13.6 GHz f ± 645 MHz
-87 dBc typ.
Mixer level -10 dBm 13.5 to 17.1 GHz f ± 645 MHz
-85 dBc typ.
Mixer level -10 dBm 17.0 to 22 GHz f ± 645 MHz
-81 dBc typ.
Mixer level -10 dBm 22 to 26.5 GHz f ± 645 MHz
-77 dBc typ.
Mixer level -30 dBm 26.5 to 34.5 GHz f ± 645 MHz
-94 dBc typ.
Mixer level -30 dBm 34.4 to 42 GHz f ± 645 MHz
-79 dBc typ.
LO related spurious (f
>600 MHz from carrier)
10 MHz to 3.6 GHz
-90 dBc typical
Other spurious Mixer level Response
条件:Carrier frequency ≤ 3 GHz -80 dBc nominal
First RF order (f ≥ 10 MHz from carrier) -30 dBm -90 dBc nominal
Higher RF order (f ≥ 10 MHz from carrier) -30 dBm -90 dBc nominal
Carrier frequency
3 to 26.5 GHz
First RF order (f ≥ 10 MHz from carrier) -10 dBm -80 dBc +
20log(N1), including IF feedthrough, LO harmonic mixing responses
Higher RF order (f ≥ 10 MHz from carrier) -40 dBm -80 dBc +
20log(N1), including higher order mixer response
Carrier frequency >
26.5 GHz
条件:Preamp On 10 MHz to 1.8 GHz -45 dBm -78 dBc -78 dBc +33 dBm nominal +33 dBm nominal
1.8 to 13.25 GHz -50 dBm -60 dBc -60 dBc +10 dBm nominal +10 dBm nominal
13.25 to 25 GHz -50 dBm -50 dBc -50 dBc 0 dBm nominal 0 dBm nominal
Source frequency Mixer level Option
508/513/526
Preamp Off 10 MHz to 1.0 GHz -15 dBm -56 dBc -63 dBc
+41 dBm
+54 dBm typ.
+48 dBm,
+55 dBm typ.
1.0 to 1.8 GHz -15 dBm -55 dBc -60 dBc
+40 dBm
+52 dBm typ.
+45 dBm,
+57 dBm typ.
1.75 to 3 GHz -15 dBm -72 dBc -69 dBc
+57 dBm
+61 dBm typ.
+54 dBm,
+60 dBm typ.
3 to 6.5 GHz -15 dBm -79 dBc -74 dBc
+64 dBm
+68 dBm typ.
+59 dBm,
+67 dBm typ.
6.5 to 10 GHz -15 dBm -75 dBc -72 dBc
+60 dBm
+66 dBm typ.
+57 dBm,
+70 dBm typ.
10 to 13.25 GHz -15 dBm -64 dBc -65 dBc
+49 dBm
+58 dBm typ.
+50 dBm,
+61 dBm typ.
13.2 to 25 GHz -15 dBm -70 dBc nom.
+55 dBm nom.
Two –18 dBm tones at input at input mixer with tone separation at 100 kHz
20 to 30 °C
Option 508/513/5256 Option
532/544/550
条件:Off 10 to 150 MHz +13.5 dBm +17 dBm typ. +14.5 dBm +19.5 dBm typ. 150 to 300 MHz +14 dBm +20 dBm typ. +16 dBm +20 dBm typ. 300 MHz to 1.1 GHz +16 dBm +21 dBm typ. +17 dBm +21 dBm typ.
1.1 to 3 GHz +16 dBm +21 dBm typ. +21 dBm
+22.5 dBm typ.
3 to 3.6 GHz +18 dBm +23 dBm typ. +21 dBm
+22.5 dBm typ.
3.5 to 8.4 GHz +18 dBm +22 dBm typ. +18 dBm
+20 dBm typ.
8.3 to 13.6 GHz +19.5 dBm +22 dBm typ. +18 dBm
+23 dBm typ.
13.5 to 17.1 GHz +13 dBm +19 dBm typ. +13 dBm
+16.5 dBm typ.
17.0 to 26.5 GHz +12 dBm +19 dBm typ. +13 dBm
+16 dBm typ.
26.4 to 34.5 GHz +12 dBm
+19 dBm typ.
34.4 to 50 GHz +8 dBm
+12 dBm typ.
条件:Two -45 dBm 10 MHz to 500 MHz +3 dBm nominal +4 dBm nominal
500 MHz to 3.6 GHz +3.5 dBm nominal +4.5 dBm nominal
Two -50 dBm 3.5 to 13.6 GHz -10 dBm nominal -15 dBm nominal
13.5 to 26.5 GHz -10 dBm nominal -18 dBm nominal
26.4 to 34.5 GHz -10 dBm nominal -15 dBm nominal
34.4 to 50 GHz -10 dBm nominal -18 dBm nominal
Phase noise Offset Specification Typical 20 to 30 °C, 10 Hz -80 dBc/Hz nominal
Two-tone at preamp input Option 508/513/5256 Option
532/544/550
CF = 1 GHz 100 Hz -94 dBc/Hz
-100 dBc/Hz typical
1 kHz -121 dBc/Hz
-124 dBc/Hz typical
10 kHz -129 dBc/Hz
-130 dBc/Hz typical
100 kHz -129 dBc/Hz
-130 dBc/Hz typical
1 MHz -145 dBc/Hz
-146 dBc/Hz typical
10 MHz -155 dBc/Hz
-158 dBc/Hz typical
四、Powersuite Specifications
(From firmware revision A.30 onward, Powersuite requires N90EMPSMB software license)
Amplitude accuracy, W-CDMA or IS95 ± 0.82 dB
± 0.23 dB (95th percentile)
(20 to 30 °C, attenuation =
10 dB)
Adjacent channel power Adjacent Alternate
Accuracy, W-CDMA (ACLR) (at specific mixer levels and ACLR ranges)
条件:ACP measurement and transfer time (fast method) 10 ms nominal (σ = 0.2 dB)
Without noise correction -73 dB typical
-79 dB typical
With noise correction -78 dB typical
-82 dB typical
Offset channel pairs measured
1 to 6
Multiple number of carriers measured Up to 12
Histogram resolution
0.01 dB
Maximum harmonic number
10th
Result Fundamental power (dBm), relative harmonics power (dBc),
Measure the
3rd order products and intercepts from two tones
Single burst output power, average output power, max. power, minimum power within burst, burst width
W-CDMA (1 to 3.6 GHz) table-driven spurious signals; search
Dynamic range 81.3 dB
82.2 dB typical
Absolute sensitivity -84.5 dBm
-89.5 dBm typical
Spectrum emission mask (SEM) cdma2000® (750 kHz offset)
Relative dynamic range (30 kHz RBW) 78.6 dB
84.8 dB typical
Absolute sensitivity –99.7 dBm
-104.7 dBm typical
Relative accuracy
± 0.12 dB
3GPP W-CDMA (2.515 MHz offset)
Relative dynamic range (30 kHz RBW) 81.9 dB
88.1 dB typical
Absolute sensitivity -99.7 dBm
-104.7 dBm typical
Relative accuracy
± 0.16 dB
Operating 0 to 55 °C Altitude
≤2,300 m
0 to 47 °C Altitude =4,600 m
Altitude 4,600 m (approx.
15,000 feet)
Relative humidity
95% relative humidity, non-condensing up to 40°C and decreasing linearly to
50% relative humidity at 55°C
From 40°C to 50°C, the maximum % relative humidity follows the line of constant
条件:standards (dates and editions are cited in the Declaration of Conformity):
Complies with the essential requirements of the European EMC Directive as well as current editions of the following
− CISPR 11 Group
1, Class A
− ICES/NMB-001
This ISM device complies with Canadian ICES-001
Cet appareil ISM est conforme à la norme NMB-001 du Canada
Complies with European Low Voltage Directive
2014/35/EU
− IEC/EN 61010-1: 2010 AMD1: 2016 / EN61010-1: 2010+A1: 2019; IEC61010-2-030: 2017 / EN 61010-2-030
2010
− Canada: CAN/CSA-C22.2 No.61010-1-12, UPD1: 2015, UPD2: 2016, AMD1:2018; CAN/CSA-C22.2 No.
61010-2-030-18
− USA: ANSI/UL Std. No.
61010-1:2012 AMD1:2018; ANSI/UL Std No.61010-2-030:2018
Acoustic noise emission Geraeuschemission
LpA < 70 dB LpA <
70 dB
Normal position Normaler Betrieb
Per ISO 7779 Nach DIN
45635 t.19
条件:be robust against the environmental stresses of storage, transportation, and end-use; those stresses include, but are not limited to, temperature, humidity, shock, vibration, altitude, and power line conditions; test methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3
Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to
条件:Voltage and frequency (nominal) 100/120 V, 50/60/400 Hz The instruments can operate with mains
nominal voltage 220/240 V, 50/60 Hz
supply voltage fluctuations up to
± 10% of the
条件:Size 269 mm (10.6 in.) diagonal (nominal) capacitive multi-touch screen
Internal Removable solid state drive (≥
256 GB) and secure digital SD memory device
External Supports USB
3.0/2.0 compatible memory devices
The recommended calibration cycle is one year; calibration services are available through Keysight service centers
功能 Triplexed · LO 输出, IF 输入, 和 mixer bias
Mixer bias range
± 10 mA in 10 μA step
IF BW path < 25 MHz
322.5 MHz
IF BW path = 40 MHz
250.0 MHz
IF BW path = 255 MHz
750 MHz
IF BW path = 510 MHz
877.148375 MHz
LO output frequency range
3.75 to 14.0 GHz
条件:Voltage/current +15 Vdc, ± 7% at 150 mA max (nominal)
–12.6 Vdc, ± 10% at 150 mA max (nominal)
Passive probe -5 dB (0-10 MHz, nominal)
Input return loss -0 dB (10-40 MHz, nominal)
Probes supported 1130A, 1131A, 1132A
1134A
Host (3 ports)
Standard Compatible with USB
2.0
条件:Port marked with lightning bolt 1.2 A (nominal)
Port not marked with lightning bolt 0.5 A (nominal)
Connector BNC female, 50 Ω (nominal)
Output amplitude ≥ 0 dBm (nominal)
Headphone jack Miniature stereo audio jack
3.5 mm
Frequency
10 MHz × (1+ frequency reference accuracy)
条件:Connector BNC female, 50 Ω (nominal)
Input amplitude range –5 to 10 dBm (nominal)
Input frequency 1 to 50 MHz (nominal)
Frequency lock range ± 2 x
10-6 of specified external reference input frequency
Trigger level range
–5 to 5 V
Trigger level range
0 to 5 V (CMOS)
Monitor output
1 (Option PC6, PC6S, PC8 CPUs)
Connector VGA compatible
15-pin mini D-SUB
Format XGA (60 Hz vertical sync rates, non-interlaced) Analog RGB
Monitor output
2 (Option PC6, PC6S, PC8 CPUs)
Connector Mini DisplayPort
Noise source drive
+28 V (pulsed)
SNS Series noise source For use with Keysight Technologies’ SNS series noise sources
Connector BNC female (used by Option YAS and N9063EM0E analog demodulation
USB ports (Option PC6, PC6S, PC8 CPUs)
Host (2 ports) Stacked with each other
Standard Compatible with USB
3.0
Output current
0.9 A (nominal)
Host (1 port) Stacked with LAN
Standard Compatible with USB
2.0
Output current
0.5 A (nominal)
Device (1 port)
Standard Compatible with USB
3.0
Host (4 ports)
Standard Compatible with USB
3.0
Output current
0.9 A (nominal)
Standard Compatible with USB
3.0
Thunderbolt (Option PCA CPU)
Connector USB Type-C female
2 ports
Output current 5V
1.0 A max
Connector IEEE-488 bus connector
GPIB codes SH1, AH1, T6, SR1, RL1, PP0, DC1, C1, C2, C3, C28, DT1, L4, C0
GPIB mode Controller or device
LAN TCP/IP interface (Option PC6, PC6S, PC8 CPUs)
Connector RJ45 Ethertwist
LAN TCP/IP 接口 (选件 PCA CPU)
Connector RJ45 Ethertwist
Connector RJ45 Ethertwist
Connector SMA female, shared by CR3, CRP
Rear panel
2nd IF output, Option CR3 Center frequency
以上指标摘自厂家官方数据手册,完整定义、测试条件与保证值口径以手册为准。完整指标、测试条件与定义口径请见产品页「软件和手册 | 白皮书」栏目中的官方数据手册。
是德科技 | KEYSIGHT · onetest 仪器资源库