是德科技 | KEYSIGHT
XA1系列N9000B 信号分析仪,9kHz至3/7.5/13.6/26.5 详细指标
台式信号与频谱分析仪
Option 503 NA
9 kHz to 3.0 GHz
Option 507 NA
9 kHz to 7.5 GHz
Option 513 9 kHz to 13.6 GHz
10 MHz to 13.6 GHz
Option 526 9 kHz to 26.5 GHz
10 MHz to 26.5 GHz
Band LO multiple (N) 0RF (Option 503, 507) 0 1 9 kHz to 3.0 GHz 1 1
2.95 to 3.80 GHz
Accuracy ± [(time since last adjustment x aging rate) + temperature stability + calibration accuracy]
Option PFR ±1 x
10–7 / year
Standard ±1 ×10–6 / year ±1.5 x
10–7 / 2 years
Temperature stability Option PFR Standard 20 to 30 °C ±1.5 ×10–8 ±2 x
10–6
Full temperature range ±5 ×10–8 ±2 x
10–6
Achievable initial calibration accuracy
条件:Example frequency reference accuracy (with Option PFR) = ± (1 x 10–7 + 5 x 10–8 + 4 x 10–8) 1 year after last adjustment = ±1.9 x 10–7
Option PFR Standard ±4 ×10–8 ±1.4 x
10–6
见频段 table above · N (本振倍频次数)
Frequency readout accuracy (start, stop, center, marker) ± (marker frequency x frequency reference accuracy + 0.25 % x span + 5 % x RBW + 2 Hz + 0.5 x horizontal resolution
1)
Accuracy ± (marker frequency x frequency reference accuracy +
0.100 Hz)
Delta counter accuracy ± (delta frequency x frequency reference accuracy +
0.141 Hz)
Counter resolution
0.001 Hz
Range 0 Hz (zero span)
10 Hz to maximum frequency of instrument
Swept ± (0.25 % x span + horizontal resolution)
FFT ± (0.10 % x span + horizontal resolution)
Span = 0 Hz
1 μs to 6000 s
Span ≥ 10 Hz
1 ms to 4000 s
条件:Span ≥ 10 Hz, swept ±0.01 % nominal
Span ≥ 10 Hz, FFT ±40 % nominal
Trigger Free run, line, video, external
1, RF burst, periodic timer
Span = 0 Hz or FFT
–150 to +500 ms
Span ≥ 10 Hz, swept
1 μs to 500 ms
Gate methods Gated LO; gated video; gated FFT
条件:Gate delay jitter 33.3 ns p-p nominal
Gate length range (except method = FFT)
100.0 ns to 5.0 s
Gate delay range
0 to 100.0 s
条件:Bandwidth accuracy (power) 1 Hz to 750 kHz ±1.0 % (±0.044 dB) nominal 820 kHz to 1.2 MHz (< 3 GHz CF) ±2.0 % (±0.088 dB) nominal 1.3 to 2.0 MHz (< 3 GHz CF) ±0.07 dB nominal
2.2 to 3 MHz (< 3 GHz CF) ±0.15 dB nominal
4 to 8 MHz (< 3 GHz CF) ±0.25 dB nominal
Bandwidth accuracy (–3.01 dB) RBW range 1 Hz to 1.3 MHz ±2 % nominal
Selectivity (–60 dB/–3 dB) 4.1:1 nominal
1. Horizontal resolution is span/(sweep points – 1)
Range (–3.01 dB bandwidth) 1 Hz to 3 MHz (10 % steps), 4, 5, 6
8 MHz
EMI bandwidth (CISPR compliant) 200 Hz, 9 kHz, 120 kHz
1 MHz (Option EMC required)
EMI bandwidth (MIL STD 461E compliant) 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz
1 MHz (Option EMC required)
条件:Local measurement and display update rate 11 ms (90/s) nominal
Remote measurement and LAN transfer rate 6 ms (167/s) nominal
Marker peak search 5 ms nominal
Center frequency tune and transfer 22 ms nominal
Measurement/mode switching 75 ms nominal
1. Analysis bandwidth is the instantaneous bandwidth available around a center frequency over which the input signal can be
digitized for further analysis or processing in the time, frequency, or modulation domain.
2. Sweep points = 101
Range 1 Hz to 3 MHz (10 % steps), 4, 5, 6, 8 MHz, and wide open (labeled
50 MHz)
RF (Option 503, 507) Preamp off
100 kHz to 1 MHz Displayed average noise level (DANL) to +20 dBm
1 MHz to 7.5 GHz Displayed average noise level (DANL) to +23 dBm
Preamp on
100 kHz to 7.5 GHz Displayed average noise level (DANL) to +15 dBm
MW (Option 513/526) Preamp off
100 kHz to 26.5 GHz Displayed average noise level (DANL) to +23 dBm
Preamp on
100 kHz to 26.5 GHz Displayed average noise level (DANL) to +23 dBm
RF (Option 503, 507) Standard
0 to 50 dB in 10 dB steps
Option FSA
0 to 50 dB in 2 dB steps
MW (Option 513, 526) Standard
0 to 70 dB in 10 dB steps
Option FSA
0 to 70 dB in 2 dB steps
+30 dBm (1 W) Input attenuation ≥
20 dB, preamp off
10 dBm (10 mW) Input attenuation ≥
20 dB, preamp on
+30 dBm (1 W) Input attenuation ≥
10 dB, preamp off
+30 dBm (1 W) Input attenuation ≥
20 dB, preamp on
+50 dBm (100 W) < 10 μs pulse width, < 1 % duty cycle, input attenuation ≥
30 dB
Log scale 0.1 to 1 dB/division in 0.1 dB steps
1 to 20 dB/division in 1 dB steps (10 display divisions)
Scale units dBm, dBmV, dBμV, dBmA, dBμA, V, W, A
条件:(10 dB input attenuation, 20 to 30 °C, s = nominal standard deviation)
100 kHz to 3.6 GHz ±0.28 dB nominal
3.5 to 8.4 GHz ±0.67 dB nominal
8.4 to 26.5 GHz ±0.80 dB nominal
26.4 to 44 GHz ±0.80 dB nominal
(reference setting) 100 kHz to 3.0 GHz ±0.30 dB nominal 3.0 to 7.5 GHz ±0.50 dB nominal 7.5 to 26.5 GHz ±0.70 dB nominal
Auto Swp Time = Accy, any reference level, any scale, s = nominal standard deviation)
Frequency range Specification 95th percentile (≈
2σ)
9 kHz to 10 MHz ±0.60 dB
±0.45 dB
10 MHz to 3 GHz ±0.75 dB
±0.55 dB
3 to 5.25 GHz ±1.45 dB
±1.00 dB
5.25 to 7.5 GHz ±1.65 dB
±1.20 dB
9 kHz to 10 MHz ±0.8 dB
±0.5 dB
10 MHz to 3 GHz ±0.65 dB
±0.4 dB
3 to 7.5 GHz ±1.5 dB
±0.5 dB
7.5 to 13.6 GHz ±2.0 dB
±0.8 dB
13.6 to 19 GHz ±2.0 dB
±1.0 dB
19 to 26.5 GHz ±2.5 dB
±1.3 dB
Preamp on (P03, P07)
Preamp on (P03, P07, P13, P26)
Input attenuation switching uncertainty Specifications Additional information
Attenuation > 2 dB, preamp off 50 MHz (reference frequency) ±0.32 dB
±0.15 dB typical
Relative to 10 dB
Total absolute amplitude accuracy (10 dB attenuation, 20 to 30 °C, 1 Hz ≤ RBW ≤ 1 MHz, input signal
–10 to –50 dBm, all settings auto-coupled except
At all frequencies ± (0.40 dB + frequency response)
9 kHz to 3.6 GHz ±0.27 dB (95th percentile ≈
2 σ)
Preamp on (Option P03, P07, P13, P26) ± (0.39 dB + frequency response)
Input Voltage Standing Wave Ratio (VSWR) (≥
10 dB attenuation)
1 Hz to 3 MHz RBW
±0.15 dB
4, 5, 6, 8 MHz RBW
±1.0 dB
Log scale
–170 to +23 dBm in 0.01 dB steps
Linear scale Same as log (707 pV to 3.16 V)
Switching between linear and log
0 dB
Log scale/div switching
0 dB
–80 dBm ≤ input mixer level
< –15 dBm
±0.15 dB total
–15 dBm ≤ input mixer level
< –10 dBm ±0.30 dB
±0.15 dB typical
Normal, peak, sample, negative peak, log power average, RMS average, and voltage average
适用型号前置放大器 (选件 P03, P07, P13, P26)
条件:Gain 100 kHz to 26.5 GHz +20 dB nominal
Noise figure 100 kHz to 26.5 GHz DANL + 176.24 dB nominal
Option P03
100 kHz to 3.0 GHz
Option P07
100 kHz to 7.5 GHz
Option P13
100 kHz to 13.6 GHz
Option P26
100 kHz to 26.5 GHz
条件:RF (Option 503, 507) Preamp off 50 MHz to 7.5 GHz +2 dBm nominal
Preamp on 50 MHz to 7.5 GHz –19 dBm nominal
Preamp on 50 MHz to 26.5 GHz –19 dBm nominal
1 dB gain compression (two-tone) Total power at mixer input
MW (Option 513
526) Preamp off
50 MHz to 7.5 GHz
+7 dBm noiminal
7.5 to 13.6 GHz
+3 dBm noiminal
13.6 to 26.5 GHz
+0 dBm noiminal
Displayed average noise level (DANL) (Input terminated, sample or average detector, averaging type = Log, 0 dB input attenuation, IF Gain = High
20 to 30 °C)
9 kHz to 1 MHz (–120) dBm (–139) dBm
100 kHz to 1 MHz
1 to 10 MHz –130 (–137) dBm
–149 (–157) dBm
10 MHz to 1.5 GHz –148 (–150) dBm
–161 (–163) dBm
1.5 to 2.2 GHz –144 (–147) dBm
–160 (–163) dBm
2.2 to 2.5 GHz –144 (–147) dBm
–158 (–161) dBm
2.5 to 2.7GHz –142 (–145) dBm
–158 (–161) dBm
2.7 to 3.0 GHz –139 (–143) dBm
–158 (–161) dBm
3 to 4.5 GHz –137 (–140) dBm
–155 (–159) dBm
4.5 to 6 GHz –133 (–136) dBm
–152 (–156) dBm
6 to 7.5 GHz –128 (–131) dBm
–148 (–152) dBm
1 to 10 MHz –143 (–148) dBm
–153 (–158) dBm
10 MHz to 1.5 GHz –147 (–150) dBm
–160 (–163) dBm
1.5 to 6 GHz –143 (–147) dBm
–158 (–161) dBm
6 to 7.5 GHz –141 (–145) dBm
–155 (–160) dBm
7.5 to 13.6 GHz –139 (–142) dBm
–155 (–160) dBm
13.6 to 20 GHz –134 (–140) dBm
–153 (–157) dBm
20 to 24 GHz –132 (–138) dBm
–151 (–155) dBm
24 to 26.5 GHz –124 (–129) dBm
–142 (–147) dBm
条件:Zero span or FFT or other frequencies –100 dBm nominal
Residual responses (Input terminated and 0 dB attenuation, 20 to 30 °C) 200 kHz to 7.5 GHz (sweptz)
–90 dBm
Input related spurious 10 MHz to 7.5 GHz
–60 dBc typical
Tuned frequency (f) Mixer level Response
Image responses 10 MHz to 26.5 GHz −10 dBm
−60 dBc typical
LO-related spurious 10 MHz to 3 GHz −10 dBm
−64 dBc typical
First RF orderm(f ≥ 10 MHz from carrier) −10 dBm
−65 dBc
High RF order (f ≥ 10 MHz from carrier) −10 dBm
−65 dBc
RF/MW (Option 503, 507, 513, 526) 10 MHz to 3.75 GHz
+42 dBm
MW (Option 513, 526) 3.75 to 13.25 GHz
+54 dBm
Parentheses indicate typical performance
Preamp off (Two –20 dBm tones at input mixer spaced by 100 kHz, 0 dB attenuation, 20 to 30 °C) 10 to 400 MHz
+10 (+14) dBm
400 MHz to 3 GHz
+13 (+17) dBm
3 to 7.5 GHz
+13 (+15) dBm
Preamp off (Two –20 dBm tones at input mixer spaced by 100 kHz, 0 dB attenuation, 20 to 30 °C) 10 to 500 MHz
+11 dBm, (+15) dBm
500 MHz to 2 GHz
+12 dBm, (+15) dBm
2 to 3 GHz
+11 dBm, (+15) dBm
3 to 7.5 GHz
+12 dBm, (+17) dBm
7.5 to 13.6 GHz
+11 dBm, (+15) dBm
13.6 to 26.5 GHz
+10 dBm, (+14) dBm
条件:Figure 1. Nominal phase noise at different center frequencies for CXA
Noise sidebands (20 to 30 °C, CF =
1 GHz)
1 kHz –98 dBc/Hz
–103 dBc/Hz
10 kHz –106 dBc/Hz
–110 dBc/Hz
100 kHz –108 dBc/Hz
–110 dBc/Hz
1 MHz –130 dBc/Hz
–130 dBc/Hz
10 MHz
–145 dBc/Hz nominal
Amplitude accuracy, W-CDMA or IS95
(20 to 30 °C, attenuation = 10 dB) ±1.33 dB (±0.61 dB
95th percentile)
Accuracy, W-CDMA (ACLR) (at specific mixer levels and ACLR ranges) Adjacent Alternate
Without noise correction –63 dB
–67 dB
With noise correction –73 dB
–78 dB
Without noise correction –66 dB
–69 dB
With noise correction –73 dB
–78 dB
Offset channel pairs measured
1 to 6
Histogram resolution
0.01 dB
Maximum harmonic number
10th
Result Fundamental power (dBm), relative harmonics power (dBc), total harmonic distortion in %
Methods Power above threshold, power within burst width
Results Single burst output power, average output power, maximum power, minimum power within burst,
W-CDMA (1 to 3.6 GHz) table-driven spurious signals; search across regions
Dynamic range (RBW=1 MHz)
70.7 dB (75.9 dB typical)
Absolute sensitivity (RBW=1 MHz)
−76.5 dBm (−82.5 dBm typical)
Spectrum emission mask (SEM) cdma2000® (750 kHz offset)
Relative dynamic range (30 kHz RBW)
67.4 dB (72.7 dB typical)
Absolute sensitivity
−93.7 dBm (−99.7 dBm typical)
Relative accuracy
±0.11 dB
3GPP W-CDMA (2.515 MHz offset)
Relative dynamic range (30 kHz RBW)
73.4 dB (80.2 dB typical)
Absolute sensitivity
−91.7 dBm (−97.7 dBm typical)
Relative accuracy
±0.11 dB
五、Tracking Generator Specifications
Frequency range Option T03 1
9 kHz to 3 GHz
Option T06 1
9 kHz to 6 GHz
条件:Level accuracy 9 kHz to 100 kHz ±1.0 dB nominal 100 kHz to 3.0 GHz ±0.5 dB nominal 3.0 GHz to 6.0 GHz ±0.8 dB nominal
Absolute accuracy (at 50 MHz, −10 dBm, 20 to 30 °C)
±0.55 dB
Output flatness (referenced to 50 MHz, −10 dBm, 20 to 30 °C) Specification 95th percentile (≈ 2s) 9 kHz to 100 kHz ±1.5 dB ±1.2 dB 100 kHz to 3.0 GHz ±1.2 dB
±0.8 dB
3.0 GHz to 6.0 GHz ±1.5 dB
±1.2 dB
Average total power
+30 dBm (1 W)
条件:Offset 10 kHz −102 dBc/Hz nominal 100 kHz −104 dBc/Hz nominal 1 MHz −117 dBc/Hz nominal
Non-harmonic spurs 9 kHz to 10 MHz < −35 dBc nominal 10 MHz to 6 GHz < −35 dBc
Noise sidebands (CF =
1 GHz)
Spurious outputs (0 dBm output)
Harmonic spurs 100 kHz to 3 GHz < −35 dBc 3 GHz to 6 GHz <
−30 dBc
条件:editions of the following standards (dates and editions are cited in the Declaration of Conformity):
Complies with the essential requirements of the European EMC Directive and the UK Electromagnetic Compatibility Regulations
2016 as well as current
• IEC/EN 61326-1 or IEC/EN
61326-2-1
• CISPR 11 Group
1, Class A
• ICES/NMB-001
This ISM device complies with Canadian ICES-001
Cet appareil ISM est conforme à la norme NMB-001 du Canada
Complies with the essential requirements of the European Low Voltage Directive a well as current editions of the following st andards (dates and editions are
cited in the Declaration of Conformity)
• Canada: CSA C22.2 No.
61010-1
Acoustic noise emission Geraeuschemission
LpA < 70 dB LpA <
70 dB
Normal position Normaler Betrieb
Per ISO 7779 Nach DIN
45635 t.19
条件:and power line conditions; test methods are aligned with IEC 60068-2 and levels are similar to MILPRF-28800F Class 3.
Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be ro bust against the environ-
mental stresses of storage, transportation, and end-use; those stresses include, but are not limited to, temperature, humidity, shock, vibration, altitude,
条件:Size 269 mm (10.6 in.) diagonal (nominal)
Resolution 1280 x
768, WXGA
条件:Internal 160 GB nominal (removable solid state drive)
External Supports USB
2.0 compatible memory devices
Shipping
27.4 kg (60.4 lbs)
The CXA signal analyzer is supplied with a
3-year warranty
Host (3 ports)
Standard Compatible with USB
2.0
条件:Port marked with lightning bolt 1.2 A nominal
Ports not marked with lightning bolt 0.5 A nominal
Connector BNC female, 50 Ω nominal
Output amplitude ≥ 0 dBm nominal
Frequency
10 MHz ± (10 MHz x frequency reference accuracy)
条件:Connector BNC female, 50 Ω nominal
Input amplitude range 10 MHz ± nominal
Input frequency
10 MHz nominal
Frequency lock range ±5 x
10–6 of specified external reference input frequency
Impedance >
10 kΩ nominal
Trigger level range
–5 to 5 V
Connector VGA compatible
15-pin mini D-SUB
Format XGA (60 Hz vertical sync rates, non-interlaced) analog RGB
+28 V (pulsed) Connector BNC female
Host, super speed
2 ports (stacked with each other)
Standard Compatible with USB
3.0
Standard Compatible with USB
3.0 USB
Connector IEEE-488 bus connector
GPIB mode SH1, AH1, T6, SR1, RL1, PP0, DC1, C1, C2, C3, C28, DT1, L4, C0
Connector RJ45 Ethertwist
Wideband IF output, Option CR3
1
条件:Conversion gain –4 to +7 dB (nominal) plus RF frequency response
SA mode or I/Q analyzer
322.5 MHz
Option B25
10 Hz to 25 MHz
Span = 1 MHz
50 Hz to 1 MHz
Span = 10 kHz
1 Hz to 10 kHz
Span = 100 Hz
100 MHz to 100 Hz
Flat top, Uniform, Hanning, Gaussian, Blackman, Blackman-Harris, Kaiser Bessel (K-B 70 dB, K-B 90 dB and K-B
110 dB)
条件:Center frequency (GHz) Span (MHz) Max. error RMS (nominal)
IF phase linearity (deviation from mean phase linearity, nominal)
Option B25
10 Hz to 25 MHz
IF frequency response (standard
10 MHz IF path)
IF frequency response (demodulation and FFT response relative to the center frequency
20 to 30 °C)
≤ 3.0 ≤ 10 ±0.40 dB
0.03 dB
3.0 < f ≤ 26.5 ≤ 10 ±0.40 dB
0.25 dB
中心频率 (GHz) 跨度 (MHz) 峰值-to-peak RMS
3.0 < f ≤ 7.5 ≤ 10 2.7°
2.4°
7.5 < f ≤ 26.5 ≤ 10 1.5°
0.4°
Data acquisition (standard
10 MHz IF path)
Time record length
5,000,000 IQ sample pairs
Option B25
25 MHz analysis bandwidth
IF frequency response (demodulation and FFT response relative to the center frequency
20 to 30 °C)
中心频率 (GHz) 跨度 (MHz) 最大. 误差 RMS
条件:IF phase linearity (deviation from mean phase linearity, nominal)
≤ 3.0 10 to ≤ 25 ±0.45 dB
0.03 dB
3.0 < f ≤ 26.5 10 to ≤ 25 ±0.45 dB
0.65 dB
Center frequency (GHz) Span (MHz) Peak-to-peak RMS 0.02 ≤ f ≤ 3.0 10 to ≤ 25 2.7° 0.9° 3.0 < f ≤ 7.5 10 to ≤ 25 4.7° 2.2° 7.5 < f ≤ 26.5 10 to ≤ 25 3.5°
1.0°
Data acquisition (B25 IF path)
IQ analyzer
5,000,000 IQ sample pairs
Keysight enables innovators to push the boundaries of engineering by quickly solving
design, emulation, and test challenges to create the best product experiences. Start your
This information is subject to change without notice. © Keysight Technologies, 2018 – 202
4
Published in USA, February 28 , 202 4, 5992
-1274 EN
Publication title Publication number
CXA Signal Analyzer N9000B - Configuration Guide
5992-1275EN
X-Series Signal Analyzers - Brochure
5992-1316EN
以上指标摘自厂家官方数据手册,完整定义、测试条件与保证值口径以手册为准。完整指标、测试条件与定义口径请见产品页「软件和手册 | 白皮书」栏目中的官方数据手册。
是德科技 | KEYSIGHT · onetest 仪器资源库