Teseq/AMETEK阿美特克
PFS 503N Series 电压暂降与短时中断模拟器 详细指标
PFS 503N63 ca. 20 kg / PFS 503N100 ca. 28 kg / ca. 29 kg · PFS 503N63 19"/6 HU / PFS 503N100 19"/6 HU / 19"/6 HU
详细指标
下表为该产品(系列)官网/datasheet 公布的参数,行名保留英文原名并加中文标注;数值单位与测试条件以厂家原表为准。
规格(第2页)
• Voltage (L-L):PFS 503N63 3 x 440 V AC / PFS 503N100 3 x 440 V AC / 3 x 440 V AC
• Voltage (L-N):PFS 503N63 254 V / PFS 503N100 254 V / 254 V
• Voltage (DC):PFS 503N63 360 V / PFS 503N100 360 V / 360 V
• Frequency:PFS 503N63 50 Hz / 60 Hz and DC / PFS 503N100 50 Hz / 60 Hz and DC / 50 Hz / 60 Hz and DC
• Current AC/DC:PFS 503N63 最大. 32 A / PFS 503N100 最大. 63 A / 最大. 100 A
• Inrush current, switch for ≤50 A:better than 500 A
• Inrush current, switch for > 50 A*:better than 600 A
• Fall/rise time:Between 1 us and 5 us for abrupt changes,generator loaded with resistive load
• Protection:Swiches are electronically protected against short-circuit
• * The inrush current depends on the impedance at the connection point to the main power supply. In contrast to IEC 61000-4- 34, the above mentioned inrush current was specified for generators with an output current capability for > 50 A. According to the standard IEC 61000-4-11, the EUT’s measured inrush current shall be less than 70 % of the measured inrush current with the 1700 μF load as per procedure of Clause A.3.
• Measurements / Interfaces / General Data
• PFS 503N32:PFS 503N63 PFS 503N63 / PFS 503N100 PFS 503N100
• CRO Trigger:+15 V trigger signal for oscilloscope
• CRO I:Built-in current probe 10 mV/A; division ratio 1/100 => 10 mV/A (1 % of current)
• Interfaces(接口):USB (1200 - 19200 Bd),IEEE 488 (addresses 1 to 30)
• Analog output:0 to 10 V DC to control an external motor variac
• Dimensions(外形尺寸):PFS 503N63 19"/6 HU / PFS 503N100 19"/6 HU / 19"/6 HU
• Weight(重量):PFS 503N63 ca. 20 kg / PFS 503N100 ca. 28 kg / ca. 29 kg
• Power supply(供电):230 V / 115 V,+10/- 15 %, 50 / 60 Hz
• Fuses:2 x T 1 A (230 V) or 2 x T 2 A (115 V)
规格(第2页)
• Motor variac with delta/star mode selection
• MV 3P4016DS:Input: 3x400 V AC Output: 3x440 V AC/16 A,continously adjustable
• MV 3P4032DS:Input: 3x400 V AC Output: 3x440 V AC/32 A,continuously adjustable
• MV 3P4063DS:Input: 3x400 V AC Output: 3x440 V AC/63 A,continuously adjustable
• MV 3P40100DS:Input: 3x400 V AC Output: 3x440 V AC/100 A,continuously adjustable
• iec.control:Software to control the test,including 标准 library,test report facility and data conversion generator
• SVP CL 1700:Calibration box 1700 uF for inrush current verification of PowerFail simulators as per IEC 61000-4- 11 and IEC 61000-4-34
• SVP CL 100:100 Ohm low inductive resistor for rise/fall time verification as per IEC 61000-4-11 and IEC 61000- 4-34; Forced air cooling, 85-254 V AC, 50/60 Hz
适用标准
• IEC / EN Basic Standards:IEC 61000-4-11
• Laws & Directives:EMC Directive、ECE R10 (Automotive)
资源下载
以上内容与指标取自 AMETEK CTS(ametek-cts.com)该产品页与其 datasheet,未标注口径的为厂家公布值。参数表由 datasheet PDF 的表格还原,原表条件说明请对照 PDF 原件。
Teseq/AMETEK阿美特克 · onetest 仪器资源库