Teseq/AMETEK阿美特克
NSG 3060A models 振铃波与阻尼振荡波发生器 详细指标
2/12 Ω · IEC / external
详细指标
下表为该产品(系列)官网/datasheet 公布的参数,行名保留英文原名并加中文标注;数值单位与测试条件以厂家原表为准。
规格(第2页)
• Pulse voltage (open circuit):±200 V to 4.8 kV (in 1 V steps)
• Pulse current (short circuit):±100 A to 2.4 kA
• Impedance:2/12 Ω
• Polarity:positive / negative / alternate
• Pulse repetition:10 s,up to 9’999 s (in 1 s steps)
• Test duration:1 to 99’999 pulses,continuous
• Phase synchronization:asynchronous,synchronous 0 to 359º (in 1º steps)
• Coupling:IEC / external
规格(第2页)
• ±100 V to 2.4 kV (50 Ω matching system)
• Burst frequency:100 Hz to 1000 kHz
• Polarity:positive / negative / alternate
• Repetition time:10 ms to 9'999 ms
•Burst duration:0.1 ms to 9'999 ms,single pulse
• Test duration:1 s to 9’999s, 1 最小 to 1600 最小,endless
•Phase synchronization:asynchronous,synchronous 0 to 359º (in 1º steps)
• Coupling:internal / external
规格(第3页)
• Uvar with optional variac:depending on model (VAR 3005A)
•Uvar with step transformer:0, 40, 70, 80% (TVT 1-250-16)
• Peak inrush current capability:>500 A (at 230 V)
•Switching times:1 to 5 μs (100 Ω load)
• Event time (T-Event):20 µs to 9999 s, 0.5 to 9’999 cycles
•Repetition time:10 ms to 9’999 ms, 1 to 9’999 s
• Test duration:1 to 99’999 events,endless
•Phase synchronization:asynchronous,synchronous 0 to 359º (in 1º steps)
规格(第3页)
•Decreasing time Td:1 ms to 9.999 s, 0.5 to 9999 cycles,abrupt
• Time at reduced voltage Ts:1 ms to 9.999 s, 0.5 to 9999 cycles,
•Increasing time Ti:1 ms to 9.999 s, 0.5 to 9999 cycles,
• Repetition time:1 s to 9’999 s
•Events:1 to 99’999
规格(第3页)
•Polarity:positive / negative / alternate
•Repetition time:10 s to 9999s (in 1 s steps)
• Impedance:2 Ω
•Coil / impedance factor:0.01 to 100.00
• Test duration:1 to 9’999 pulses,endless
•Phase synchronization:asynchronous,synchronous 0 to 359º (in 1º steps)
规格(第4页)
•Field:MFT 30: 1 to 最大. 44 A/m (in 1 A/m steps),continuous
•MFT 100:80 to max. 1000 A/m (in 1 A/m steps),short-term
• Frequency:50 or 60 Hz
•Coil factor:0.01 to 100
• Test duration:1 s to 99’999 s,endless
规格(第4页)
• EUT supply:1-phase
•EUT VAC:Up to 300 Vrms *, 50 / 60 Hz (phase - neutral)
•EUT VDC:Up to 300 V DC
• EUT current:1 x 16 Arms continuous (over heat protected)
•Connections:Front panel:- EUT: 4mm banana plug
• - Burst OUT 50 SHV
•- Trigger out BNC
• Rear panel:- EUT supply:banana plug 4 mm
•- Additional ground connector
• - Instrument supply 85 V to 264 V AC
•- Connector surge HV –COM
• Surge:Standard coupling as per IEC 61000-4-5
•Coupling mode:Line to Line
• Line(s) to ground
•Mains decoupling:1.5 mH 0% + 35%
• Decoupling attenuation:Residual pulse voltage on EUT power supply inputs 15 % 最大.
•Residual voltage on non-pulsed EUT power supply inputs 15 % max.
• EFT (Burst):Standard coupling all lines to ref ground (GND)
•IEC / EN 61000-4-4
• L, N, PE to ref GND
•Any lines and combination t:to ref GND:
• L:to ref GND
•N:to ref GND
• PE:to ref GND
•L,N:to ref GND
• L, PE:to ref GND
•N,PE:to ref GND
• PQT:Dips &interrupts to phase L
规格(第5页)
• CDN 3043A-C32:Three phase automatic coupling decoupling network, 3x480 V / 32 A
•CCI:Burst EFT capacitive coupling clamp for data line coupling
• CDN 117A-C4-4-1:Coupling networks for unsymmetrical signal-/data lines (surge)
• CDN 118A-C4-4-1:Coupling networks for symmetrical signal-/data lines (surge)
• CDN HSS-2:Coupling network for 2 kV surge pulse 1.2 / 50 μs IEC/EN 61000-4-5 on
•unshielded symmetrical high speed telecom lines (Ethernet)
• PVF BKIT 1:Burst/EFT verification set
•MD 300:Current probe 5 kA
适用标准
•IEC / EN Basic Standards:IEC 61000-4-4、IEC 61000-4-5、IEC 61000-4-8、IEC 61000-4-9、IEC 61000-4-11、IEC 61000-4-12、IEC 61000-4-29
• IEC / EN Generic Standards:EN 61000-6-1、EN 61000-6-2
• Telecom / ITU:ITU-T K.17、ITU-T K.20、ITU-T K.28、ITU-T K.45
资源下载
以上内容与指标取自 AMETEK CTS(ametek-cts.com)该产品页与其 datasheet,未标注口径的为厂家公布值。参数表由 datasheet PDF 的表格还原,原表条件说明请对照 PDF 原件。
Teseq/AMETEK阿美特克 ·onetest 仪器资源库