客服
频率范围：10 MHz 至 33 GHz
宽广的动态范围（-70 至 +20 dBm）适用于小信号测量
5 MHz 视频带宽
拥有 LAN/以太网供电（PoE）连通性，支持进行远程监测（最远 100 米）
符合 TVAC 标准，可在真空中使用
内置归零和自动校准功能可以节省测量时间，降低测量不确定度
仪器现在内置 BenchVue 软件许可证（BV0007B）
BenchVue 让您可以简便地连接和控制仪器以及自动执行测试序列
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
类似产品
频率范围 50 MHz至6/25.5/50GHz动态范围：−50 至 +20 dBm内部调零功能，无需外部校准调制信号的测量通过 USB 2.0/3.0 供电和控制
同厂商产品
频率范围：10 MHz 至33 GHz拥有 LAN 连通性及宽广的动态范围（-70 至 +26 dBm），适用于小信号测量快速实时测量，高达 50,000 个读数/秒1 MSa/s 的可变采样率和 1 MSa 的数据存储器支持长时间采样以零静寂时间进行实时测量，可确保对每一个连续脉冲都加以测量平均模式时间选择性功能能够利用整个动态范围执行平均功率测量和时间选择性平均功率测量内置归零和自动校准功能可以节省测量时间，降低测量不确定度仪器现在内置 BenchVue 软件许可证（BV0007B）。 BenchVue 能帮助您轻松连接和控制仪器，自动执行测试序列。
U2040 X系列U2049XA 10MHz至33GHz LAN 峰值功率/平均功率传感器 -70dBm至+20 dBm|是德/KEYSIGHT (在产)
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
是德科技|KEYSIGHT
10 MHz 至 33 GHz LAN 峰值功率/平均功率传感器
宽动态范围功率传感器
产品简介
使用是德科技 U2040 X 系列功率传感器，可准确测量各种调制信号的功率。
核心参数
• 接头类型：3.5 mm (m)
• 频率范围：10 MHz 至 33 GHz
• 功率范围：-70 至 +20 dBm
• 测量类型：峰值、平均值、峰均比
功能特性
• 产品亮点
频率范围：10 MHz 至 33 GHz。
宽广的动态范围（-70 至 +20 dBm）适用于小信号测量。
5 MHz 视频带宽。
具备 LAN/以太网供电（PoE）连接功能，支持远程监控（最远 100 米）。
符合 TVAC 标准，可在真空中使用。
内置的归零和自动校准功能可以节省测量时间，降低测量不确定度。
该仪器现已内置BenchVue 软件许可证（BV0007B）。
BenchVue 可让您轻松连接和控制仪器，并自动执行测试序列。
资源下载
以上内容与指标均取自是德科技（KEYSIGHT）官网该产品详情页与官方产品资料，未标注口径的为厂家公布值。
是德科技|KEYSIGHT · onetest 仪器资源库
是德科技 | KEYSIGHT
U2040 X系列U2049XA 10MHz至33GHz LAN 峰值功率/平均功率传感器 -70dBm至+20 dBm 详细指标
宽动态范围功率传感器
一、性能规格
There are two types of product specifications
条件：range of 0 to 55 °C unless otherwise noted. Warranted specifications include measurement uncertainty calculated with a 95% confidence.
that is useful in the application of the product. These characteristics are shown in italics.
One group of characteristic types describes ‘attributes’ common to all products of a given model or option.
connector’. In these examples, product weight is an ‘approximate’ value and a 50-ohm input is ‘nominal’.
These two terms are most widely used when describing a product’s ‘attribute’.
Warranted specifications are specif ications which are covered by the product warranty and apply over a
Characteristic specifications are specifications that are not warranted. They describe product performance
Characteristic information is representative of the product. In many cases, it may also be supplemental to a
warranted specification. Characteristics specifications are not verified on all units. These are several types of
characteristic specifications. They can be divided into two groups:
Examples of characteristics that describe ‘attributes’ are the product weight and ‘50-ohm input Type-N
The second group describes ‘statistically’ the aggregate performance of the population of products. These
characteristics describe the expected behavior of the population of products. They do not guarantee the
performance of any individual product. No measurement uncertainty value is accounted for in the
specification. These specifications are referred to as ‘typical’.
功率传感器 will meet its 规格 when
Stored for a minimum of two hours at a stable temp erature within the operating temperature range, and
turned on for at least
30 minutes
The power sensor is within its recommended calibration period, and
Used in accordance to the inform ation provided in the User’s Guide
For power measurements below
-60 dBm, it is re commended to turn on the power sensor for 1.5 hours
(with the X-Series power sensor connected to the device-under-test)
二、主要指标
平均模式功率量程 (仅平均模式)
-70 dBm to +26 dBm -70 dBm to +26 dBm
-70 dBm to +20 dBm
正常模式功率量程 (峰值模式)
N/A Off: -40 to +26 dBm Off
-40 to +20 dBm
High/5 MHz: -40 to +26 dBm High/5 MHz
-40 to +20 dBm
Medium/1.5 MHz: -45 to +26 dBm Medium/1.5 MHz
-45 to +20 dBm
Low/300 kHz: -45 to +26 dBm Low/300 kHz
-45 to +20 dBm
Maximum power (Damage level) Average: + 29 dBm Average: +29 dBm Average
+29 dBm
Peak: +32 dBm for < 10 µs duration Peak: +32 dBm for < 10 µs duration Peak: +32 dBm for <
10 µs duration
Voltage: ≤ 20 VDC Voltage: ≤ 20 VDC Voltage: ≤
20 VDC
Rise/fall time 3 ≤ 100 ns ≤ 100 ns ≤
100 ns
Maximum sampling rate
20 Msamples/second continuous
sampling 20 Msamples/second continuous sampling
20 Msamples/second continuous
Power linearity at 5 dB step 1 Average mode: < 1.0% Average mode: < 1.0% Average mode: <
1.0%
Normal mode: < 1.3% Normal mode: <
1.0%
Basic 精度平均功率测量
≤ ± 0.21 dB or ± 4.7% for < 30 MHz ≤ ± 0.21 dB or ± 4.7% for < 30 MHz ≤ ± 0.30 dB or ± 6.6% for <
30 MHz
≤ ± 0.18 dB or ± 4.1% for ≥
30 MHz to
≤ 10 GHz
≤ ± 0.18 dB or ± 4.1% for ≥
30 MHz to
≤ 10 GHz
≤ ± 0.23 dB or ± 5.2% for ≥
30 MHz to
≤ 26.5 GHz
≤ ± 0.19 dB or ± 4.3% for >
10 GHz to
18 GHz
≤ ± 0.19 dB or ± 4.3% for >
10 GHz to
18 GHz
≤ ± 0.27 dB or ± 5.9% for >
26.5 GHz
to ≤
33 GHz
Signal bandwidth Wideband average power VBW for peak power: ≤ 5 MHz 4 VBW for peak power: ≤ 5 MHz
4
Wideband average power Wideband average power
条件：1. Any relative power measurem ent of up to 5 dB will have <1% error, excluding zero set, zero drift and noise effects. With def ault
aperture and averaging, for power levels above -50 dBm, zero set, zero drift and noise effects can be disregarded.
2. For U2041/42/43/44XA, s pecification is valid over a range of -45 to +26 dBm, DUT Max SWR < 1.2.For U2049XA, specification is
LOW/MED is 90 kHz, video bandwidth of HI GH/OFF is 240 kHz. Refer to Characteri stic peak flatness se ction for details.
Single shot bandwidth NA 5 MHz
5 MHz
Minimum pulse width NA 250 ns
250 ns
Maximum capture length NA 1 s (decimated)
1 s (decimated)
6.5 ms (at full sampling rate)
6.5 ms (at full sampling rate)
Maximum pulse repetition rate NA 2 MHz (based on 10 samples/period) 2 MHz (based on
10 samples/period)
valid over a range of–45 to +20 dBm, DUT Max SWR < 1.2.For all models, averaging set to 32, in Free Run mode. For power levels
below
–45 dBm, the effect of zero drift, zero set and measurement noise must be c onsidered separately base on the uncertainty
calculation method s hown in Appendix A. 3. With video bandwidth OFF setting and carrier frequency ≥ 300 MHz. 4. Five MHz video bandwidth is applicable for carrier frequency ≥ 300 MHz. For carrier frequency <
300 MHz, video bandwidth of
def aveN def at
mult ave
0.8N N at= ´
噪声和 drift
Mode VBW setting Zero set 1 Zero drift
2 Measurement noise Noise per sample
外部 zero 内部 zero
条件：1. After 1 hour of warm up and at a constant temperature.
2. After 1 hour of warm up and at a constant temperature, measurements taken over a per iod of 4 hours after zeroing. Drift is
calculated based on the average differenc e of any two measurements 1 hour apart.
3. Only applicable to U2042/44/49XA.
4. Noise defined for 1 av erage at free run mode.
5. Noise defined for 16 av erages at 50 ms aperture.
Normal 3 LOW/MED ± 16 nW ± 23 nW ± 10 nW ± 10 nW
± 0.15 µW
HIGH/OFF ± 50 nW ± 60 nW ± 15 nW ± 32 nW
± 0.8 µW
Average – ± 100 pW for < 300 MHz ± 1 nW ± 25 pW ± 80 pW
5 —
± 70 pW for >=
300MHz
Noise multipliers
条件：takes the lower the noise is. We will define three measurement modes and how the noise can be adjusted.
The measurement noise for the U2040 X-Series power sensor is dependent on the measurement mode and the time
for the measurement. In general, average only mode is lower noise than normal mode, and the longer a measurement
Average-仅模式
The measurement noise due to the U2040 X-Series power sensor is dependent on the measurement time. In general,
the longer a measurement takes the lower the noise is. The measurement noise specification is defined for 16
averages with an aperture of 50 ms, or a total time of 800 ms. Noise will reduce or increase with the square root ratio
of the measurement time to the specification measurement time. Thus, a noise multiplier factor can be derived for any
combination of averaging and aperture
条件：increases beyond 3.2 seconds the noise reduction exponent changes from 0.5 to 0.2.
Increasing measurement time will reduce noise at this rate until around
3 seconds. As the measurement time
æö ÷ç ÷=´ ´ £ ç ÷ç ÷ç ´èø æö ÷ç ÷=´ ´ £ ç ÷ç ÷ç ´èø
=´ 0.2
0.5 mult ave a ave a
mult ave a ave a actual mult spec 1N 0.89 , for N t
3.2N
1N 0.63 , for N t
3.2N
Free-run 正常模式
The measurement noise specification is defined for average of 1. Although the noise will reduce with increased
averaging, it will not have a significant impact on the measurement uncertainty, and the figure of 32 nW (High/Off
VBW) or 10 nW (Low/Med VBW) without any multiplier should be used in the uncertainty calculations. (Refer to the
Gated-average 正常模式
The measurement noise on a time-gated average power measurement in normal mode will depend on the time gate
length. 20 averages are carried out every
1 µs of gate length. The noise-per-sample contribution in this mode can be
reduced by approximately to a limit of 32 nW. (Refer to the noise and drift table above for the noise-per-
适用型号 U2041/42XA U2043/44XA
Frequency band -70 to +15 dBm +15 to +26 dBm -70 to +15 dBm
+15 to +26 dBm
10 MHz to 6 GHz < 1.2 < 1.29 < 1.20 <
1.29
> 6 GHz to 18 GHz < 1.26 <
1.30
适用型号 U2049XA
Frequency band -70 to +15 dBm
+15 to +20 dBm
10 MHz to 30 MHz < 2.18 <
2.21
> 30 MHz to 50 MHz < 1.35 <
1.37
> 50 MHz to 100 MHz < 1.22 <
1.24
> 100 MHz to 11.5 GHz < 1.17 <
1.21
> 11.5 GHz to 30 GHz < 1.29 <
1.33
> 30 GHz to 33 GHz < 1.33 <
1.36
gate length
50 ns
校准不确定度
条件：Definition: Uncertainty resulting from non-linearity in the U2040 X-Series detection and correction process. This can be
considered as a combination of traditional linearity, calibration factor and temperature specifications and the
uncertainty associated with the internal calibration process.
适用型号频段 U2041/42XA U2043/44XA U2049XA
10 MHz to 30 MHz 4.4% 4.4%
4.5%
> 30 MHz to 500 MHz 3.7% 3.7%
3.9%
> 500 MHz to 1 GHz 3.7% 3.7%
3.8%
> 1 GHz to 6 GHz 3.7% 3.7%
4.0%
> 6 GHz to 10 GHz − 3.7%
4.0%
> 10 GHz to 18 GHz − 4.0%
4.2%
> 18 GHz to 26.5 GHz − −
4.9%
> 26.5 GHz to 33 GHz − −
5.6%
正常模式
Frequency band VBW OFF/HIGH
1 VBW MED/LOW
适用型号 U2042XA U2044XA U2049XA U2042XA U2044XA U2049XA
条件：1. Specification valid for envir onment up to 70% relative humidity. Additional 1.6% to be included for environment up to 95% re lative
10 MHz to 30 MHz 5.7% 5.7% 4.5% 4.4% 4.4%
4.5%
> 30 MHz to 500 MHz 5.2% 5.2% 4.1% 3.7% 3.7%
3.9%
> 500 MHz to 1 GHz 5.2% 5.2% 3.9% 3.7% 3.7%
3.9%
> 1 GHz to 6 GHz 5.3% 5.3% 4.0% 3.7% 3.7%
4.0%
> 6 GHz to 10 GHz — 5.3% 4.1% — 3.7%
4.1%
> 10 GHz to 18 GHz — 5.4% 4.3% — 4.0%
4.2%
> 18 GHz to 26.5 GHz — — 5.0% — — 4.9%
> 26.5 GHz to 33 GHz — — 5.7% — — 5.6%
三、时基和触发规格
Range
2 ns to 100 ms/div
Accuracy
± 25 ppm
Jitter ≤
1 ns
内部触发
Range U2042/44XA
-25 to +26 dBm
U2049XA
-25 to +20 dBm
Resolution
0.1 dB
Level accuracy
± 0.5 dB
Latency 1.5 µs
± 50 ns
Jitter ≤
5 ns rms
外部 TTL 触发输入
High >
2.4 V
Low <
0.7 V
Latency 500 ns
± 50 ns
Minimum trigger pulse width
150 ns (average mode)
50 ns (normal mode)
1
Minimum trigger repetition period
300 ns (average mode)
100 ns (normal mode)
1
Maximum trigger voltage input 5 V EMF from 50 Ω DC (current <
100 mA) or
5 V EMF from 50 Ω pulse width < 1 s (current <
100 mA)
Impedance 100 kΩ (default)
50 Ω
Jitter ≤
15 ns rms
外部 TTL 触发输出
High >
2.4 V
Low <
0.7 V
Latency 500 ns
± 50 ns
Impedance
50 Ω
Jitter ≤
15 ns rms
触发延迟
Range Normal mode: 1
± 1.0 s
Average only mode
–1.6 ms to +1 s
Resolution 1% of delay setting
50 ns minimum
触发 hold 关
Range
1 µs to 400 ms
Resolution
1% of selected value (to a minimum of 50 ns)
Trigger level threshold hysteresis
Range
± 3 dB
Resolution
0.05 dB
四、通用规格
Current requirement U2041/42/43/44XA: Approximately <
500 mA
U2049XA: 3W, 802.3af or 802.3at Type
1 standard
Trigger input Input has TTL compatible logic levels and uses a SMB connector
Trigger output Output provides TTL compatible logic levels and uses a SMB connector
远程编程
条件：1. Tested under normal mode and fast mode, with buffer mode trigger count of 100, output in binar y format, unit in watt, auto-z eroing, auto-
calibration, and step detect disabled. 2. Tested under normal mode and fast mode, with buffer mode trigger count of 100, pulsed signal wi th PRF of 20 kHz, and pulse w idth at 15 μs. 3. Tested under average only mode and fast mode, with bu ffer mode trigger count of 200, aperture duration of 20 μs, data format set to real, external trigger or immediate trigger setting.
Interface U2041/42/43/44XA: USB
2.0 interface USB-TMC compliance
U2049XA 10/100 Mbps RJ-45 Power Over Ethernet port, transfers data and power on one single cable
802.3af or 802.3 at Type
1 compliant
Command language SCPI standard interface commands, IVI-COM, IVI-C drivers
Maximum measurement speed (Applicable for USB & LAN socket connectivity)
Free run trigger measurement 25,000 readings per second
1
External trigger time-gated measurement 20,000 readings per second
2
Average mode real time measurement 50,000 readings per second
3
五、机械规格
Mechanical characteristics such as center conductor protrusion and pin depth are not performance specifications. They
are, however, important supplemental characteristics related to electrical performance. At no time should the pin depth
Environmental compliance
条件：– Operating condition: 0 to 55 °C
– Storage condition: -40 to 70 °C
– Operating Condition: 0 to 55 °C. This operating condition is applicable for both standard
Temperature All models except U2049XA Option TVA:
For U2049XA-TVA:
法规符合性
The X-Series complies with the following safety and EMC requirements
IEC
61010-1:2001/EN61010-1:2001 (2nd edition)
IEC 61326:2002/EN
61326:1997 + A1:1998 +A3:2003
Canada: ICES-001:2004
Australia/New Zealand: AS/NZS CISPR11:2004
Canada: ICES-001:2004
Australia/New Zealand: AS/NZS CISPR11:2004
适用型号 Others U2041/42/43/44XA U2049XA
Dimensions (Length x Width x Height) 168 mm x 46 mm x 35 mm 197 mm x 40 mm x
24 mm
Weight Net weight: ≤ 0.3 kg Net weight: ≤
0.37 kg
Shipping weight: ≤ 1.3 kg Shipping weight: ≤
1.4 kg
Recommended calibration interval 1 year
1 year
Additional Specifications for U2042/44XA USB Peak and Average Power Sensor
Measured rise time percentage error versus signal-under-test rise time
45%
40%
35%
30%
25%
20%
15%
10%
5%
0%
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900
9501000
信号 under 测试上升时间 (ns)
条件：Figure 6. Measured rise time percentage error versus signal under test rise time.
Although the rise time specification is ≤
100 ns, this does not mean that the U2040 X-Series can accurately measure
a signal with a known rise time of 100 ns. The measured rise time is the root sum squares (RSS) of the signal-under-
和 % 误差: éùêú ´êúëû
- % error=
100
视频带宽
The video bandwidth in the normal mode of the U2042/44XA can be set to High, Medium, Low, and Off. The video
bandwidths stated below are not the
3 dB bandwidths, as the video bandwidths are corrected for optimal flatness
(except the Off filter). Refer to Figure 5, “Characteristic peak flatness,” for information on the flatness response. The Off
video bandwidth setting provides the warranted rise time and fall time specifications and is the recommended setting for
视频带宽设置 (正常模式) LOW MED HIGH OFF
条件：design, which enables all the diodes to operate in their square-law region.
1. Specification is based on pulse signal with ≥ 80 ns rise time.
Rise/fall time < 300 MHz 6.9 µs 6.9 µs 2.0 µs
2.0 µs
≥ 300 MHz 0.6 µs 0.3 µs 0.1 µs
0.1 µs
Overshoot 1 < 300 MHz 2% 2% 3%
4%
≥ 300 MHz 12% 15% 9%
5%
The average mode of the X-Series peak and average power sensor provide accurate average power measurements
for broadband modulated signals like a thermocouple sensor. This is due to the X-Series power sensor’ four path diode
特性峰值 flatness
The peak flatness is the flatness of a peak-to-average ratio measurement for various tone separations of an
equal two-tone RF input. Figure 5 below refers to the relative error in peak-to-average ratio measurements as
the tone separation is varied. The measurements were performed at –10 dBm and applicable for carrier
frequency ≥
300 MHz.
Figure
7. U2042/44/49XA error in peak-to-average ratio measurements for a two-tone input
Error (dB)
Using the U2040 X-Series with the BenchVue Software
Keysight BenchVue software for the PC accelerates testing by providing intuitive, multiple instrument measurement
visibility and data capture with no programming necessary. You can derive answers faster than ever by easily viewing,
capturing and exporting measurement data and screen shots. The U2040 X-Series is supported by the Keysight
BenchVue software and BV0007B power meter/sensor control and analysis app. Once you plug the USB power sensor
into a PC and run the software you can see measurement results in a wide array of display formats and log data without
any programming. BenchVue software license (BV0007B) is now included with your instrument
Figure
8. Digital meter, analog meter and datalog view.
Figure 9. Multi-channel trace display with 4-pairs of gates and automatic pulse parameters measurement (sample screen shot with
two U2042XA).
Figure
10. Multi-list view with ratio/difference function.
Data log view
Trace view (up to 4 channels or traces on one graph)
Compact 模式显示
Graph functions Single marker (up to 5 markers per graph)
Dual marker (up to 2 sets of markers per graph)
Graph zooming
Gate measurement analysis (up to 4-pair of gates)
Pulse characterization functions
17-point automatic pulse parameters characterization
Instrument settings Save and recall instrument state including graph settings
Instrument preset settings (DME, GSM, WCDMA, WLAN, LTE, etc.)
Gamma and S-parameters tables
条件：Full instrumentation control includes frequency/average/trigger settings, zero and calibration, etc.
Limit and alert function Sensors Limit and alert notification
Alert summary
Export data or screen shots Data logging (HDF5/MATLAB/Microsoft Excel/Microsoft Word/CSV)
PC 操作系统
Windows 10, 8 and 7 Windows 10
32-bit and 64-bit (Professional, Enterprise, Education, Home versions)
Windows
32-bit and 64-bit (Core, Professional, Enterprise)
Windows 7 SP1 and later
32-bit and 64-bit (Professional, Enterprise, Ultimate)
Computer hardware Processor
1 GHz or faster (2 GHz or greater recommended)
RAM
1 GB (32-bit) or 2 GB (64-bit) (3 GB or greater recommended)
Windows XP SP3
32-bit
Processor
600 MHz
以上指标摘自厂家官方数据手册，完整定义、测试条件与保证值口径以手册为准。完整指标、测试条件与定义口径请见产品页「软件和手册 | 白皮书」栏目中的官方数据手册。
是德科技 | KEYSIGHT · onetest 仪器资源库
全部
是德科技官方渠道
官方渠道（官网 / 热线 / 邮箱）
• 销售服务热线
800-810-0189（座机）／400-810-0189（手机） 工作时间 周一至周五 8:30-17:30
• 热线传真
800-820-2816（座机）／400-820-3863（手机）
• 亚洲区支持邮箱 tm_asia@keysight.com
• 服务与支持邮箱
instruments_services@keysight.com
• 官网
www.keysight.com（中国站 www.keysight.com.cn）
全国办事处
• 北京总部
是德科技（中国）有限公司 北京市朝阳区望京北路3号
电话：(010) 64397888
传真：(010) 64390278
邮编：100102
• 上海分公司
上海市虹口区四川北路1350号中信泰富申虹广场5楼、16-19楼
电话：(021) 36127688
传真：(021) 36127188
邮编：200080
• 广州分公司
广州市天河北路233号中信广场66层07-08室
电话：(020) 38113988
传真：(020) 86695074
邮编：510613
• 深圳分公司
深圳市福田中心区福华一路六号免税商务大厦3楼
电话：(0755) 83079588
传真：(0755) 82763181
邮编：518048
• 成都分公司
成都高新区南部园区天府四街116号
电话：(028) 83108888
传真：(028) 85330830
邮编：610041
• 西安分公司
西安市碑林区南关正街88号长安国际大厦D座5/F
电话：(029) 88867770
传真：(029) 88861330
邮编：710068
• 中国香港
是德科技香港有限公司 中国香港北角电气道169号25楼
电话：(852) 31977777
传真：(852) 25069292 香港热线 800-938-693
• 维修 / 校准服务中心
中国大陆 北京 / 成都 / 苏州 服务热线 800-810-0189 / 400-810-0189
授权分销商
• 上海信果电子科技有限公司（上海）
上海市沪闵路8075号虹梅商务大厦6楼609室
邮编：200233
电话：021-64518399
传真：021-54560890
邮箱：jason.wu@signalgroup.com.tw
• 上海精测电子有限公司（上海）
上海市北京东路668号西楼15E
邮编：200001
电话：13916371522
传真：021-53086102
邮箱：yangzhen@jingce.com
• 北京东方中科集成科技股份有限公司（北京）
北京市海淀区复兴路69号院12号楼2层、7层 邮政编码：100039
邮编：100039
电话：400-650-5566
传真：010-68728001
邮箱：zhangzp@oimec.com.cn
官网：www.dfzk.com/br_keysight.html
• 北京千聚科技发展有限公司（北京）
北京市海淀区西三旗花园雪梨澳乡A区23-4号
邮编：100085
电话：010-82907162
邮箱：zhuqihui@qianjukeji.com.cn
• 北京金龙翌阳科技发展有限公司（北京）
北京市海淀区大柳树路17号富海大厦2001室
邮编：100086
电话：010-62167379/6213538
邮箱：zhy@yy17.com
官网：www.yy17.com
• 厦门同昌源电子有限公司（厦门）
厦门市湖里区悦华路215号综合楼二楼C单元
邮编：361000
电话：0592-5663715
传真：0592-2236795
邮箱：tcydz@xmtcy.com
• 合肥新普仪测科技有限公司（合肥）
安徽省合肥市长江路53号长江大厦1102室
邮编：230001
电话：+86(0551)65177518 ext:
传真：+86(0551)6260 7155
邮箱：hfsimple@mail.hf.ah.cn
• 品展国际贸易(上海)有限公司（上海）
上海外高桥保税区泰谷路18号1号楼1105A室
邮编：200003
电话：+86(0512) 6808 6023
传真：+86(0512) 6808 6025
邮箱：melody@chtek.com.tw
官网：chtek.com.tw
• 广州康祺科技发展有限公司（广州）
广州市天河区华强路1号珠控国际中心8层06单元
邮编：510623
电话：020-38295200
传真：020-38295122
邮箱：baobao@kontchi.com
• 广州科欣仪器有限公司（广州）
广州市黄埔区黄埔大道933号209室
邮编：510700
电话：86-20-38699788
传真：86-20-34395932
邮箱：cs@gzkexin.com.cn
• 成都安诚迅飞电子科技有限公司（成都）
成都市武侯区人民南路四段27号1栋1单元 24层3号
邮编：610041
电话：028-86027579
邮箱：jincai.he@ancentest.com
• 新亚制程（浙江）股份有限公司（深圳）
深圳市福田区中康路卓越城梅林中心广场（北区）一期1栋3楼
邮编：518035
电话：0755-23818536
传真：0755-23818625
邮箱：wangrongbin@sunyes.cn
• 无锡市邦达测量科技有限公司（无锡）
江苏省无锡市新区长江北路112号
邮编：214028
电话：0510-85258521 ext:
邮箱：bdyiqi@bdyiqi.com
• 武汉力德仪测科技有限公司（武汉）
武汉市光谷大道54号国际企业中心四期A座501室
邮编：430074
电话：027-85481090 ext:
邮箱：liuyang@leader-e.com
• 苏州工业园区贝奇仪器有限公司（苏州）
苏州工业园区通园路398号海逸大厦A402室
邮编：215006
电话：0512-62883832
邮箱：szbeiqi@szbeiqi.net
• 青岛鲁芯仪器有限公司（青岛）
青岛市福州北路135号鼎都1号写字楼328室
邮编：266007
电话：15953279543
传真：0532-80669058-830
邮箱：gaochangyuan@qdluxin.com
• Avnet Electronics Marketing（Phoenix）
2211 South 47th Street
邮编：85034
电话：+65 6289 9164
邮箱：Josephine.Cheong@avnet.com
官网：OnlineSupportAsia@Avnet.com
• RFMW, Ltd.（San Jose）
188 Martinvale Lane
邮编：95119
电话：#09-129
邮箱：sales@rfmw.asia
官网：www.rfmw.com
• 沈阳实拓科技有限公司（沈阳）
沈阳市和平区三好街35号8层
邮编：110004
电话：024-23843636
传真：024-23905232
邮箱：lf@shituokeji.cn
• 領先科儀有限公司（香港）
新界荃灣海盛路3號TML廣場21樓B5室
邮编：.
电话：852-31523600
传真：852-31523608
邮箱：allenma@advanceinst.com
租赁合作伙伴
• 深圳君鉴科技股份有限公司（深圳市）
光明街道观光路华强创意产业园3栋B座12楼光明新区
邮编：518107
电话：400-860-3035
邮箱：shichang@chrent.com
• 益莱储（北京）检测设备租赁有限公司（北京市）
来广营高科技产业园区4号楼3层301朝阳区
邮编：100102
电话：400-819-2800
邮箱：jim.chen@electrorent.com
• 北京东方中科集成科技股份有限公司科技租赁事业部（北京市）
北京市海淀区阜成路67号银都大厦12层
邮编：100142
电话：400-650-5566
传真：010-68728001
邮箱：wangml@oimec.com.cn
• 客而禧设备租赁（上海）有限公司（Shanghai）
徐汇区古美路1515号19号楼903室
邮编：201102
电话：021-54453166
邮箱：krc@krcchina.com
• 深圳市瑞普高电子有限公司（深圳市）
天安云谷产业园一期3栋D座1505-1506龙岗区
邮编：518129
电话：0755-29050100
邮箱：rickluo@ruipugao.com
• 苏州锦凡精密仪器科技有限公司（苏州）
苏州市高新区滨河路625号创业大厦5幢505
邮编：215011
电话：18914031336
邮箱：18914031336@jfsz.net
解决方案合作伙伴
• Tokyo Weld Co., Ltd.（Ota-ku）
2-28-1 Kitamagome
邮编：143-0021
电话：81-3-3775-4331
传真：81-3-3775-4359
邮箱：d-imai@tokyoweld.com
• 上海恒榉电子科技有限公司（Shanghai）
上海市奉贤区南桥镇西闸公路1036号3栋2层
邮编：201401
电话：18112779808
邮箱：salesvalue@everise-hj.com
• 佳燁科技股份有限公司(Ghiatek)（桃園市龜山區）
光明街243巷2號
邮编：33372
电话：+886-3-350-9960
传真：+886-3-320-3475
邮箱：support@ghiatek.com
• 华美博科技（北京）有限公司（北京市）
蓝靛厂东路2号金源时代商务中心C座9A2海淀区
邮编：100097
电话：010-88598732
邮箱：sino@sino-microtech.com
• 和创联合科技（北京）有限公司（北京市）
中关村东路18号财智国际大厦A座1612海淀区
邮编：100083
电话：400 650 7802
邮箱：info@hisuntest.com
• 昆山捷得立电子有限公司（昆山市）
登云路288号海创大厦C座25楼
邮编：215316
电话：0512-36831748
邮箱：sales@jiedeli-china.com
• 深圳市捷泰普科技有限公司（深圳市）
宝安区西乡街道前进二路桃源居南面深圳市智汇创新中心A座216室
邮编：518126
电话：0755-83908488
邮箱：sales@jtptech.cn
• 深圳市易捷测试技术有限公司（深圳市）
福虹路9号世贸广场C座1203室福田区
邮编：518033
电话：0755-83698930
邮箱：dongni.zhang@gbit.net.cn
官网：gbit.net.cn
• 深圳市泰仕捷科技有限公司（深圳市）
松岗大道7号汉海达大厦616室宝安区
邮编：518105
电话：0755-27128586
邮箱：riky.gua@tesijet.com
• 深圳市蓉声科技有限公司（深圳市）
福中路海连大厦连天阁 1103 室福田区
邮编：518033
电话：13828880571
邮箱：jiang.qian@radiation-test.com
• 苏州伊欧陆系统集成有限公司（苏州）
星湖街218号生物纳米园A7楼305室苏州工业园区
邮编：215000
电话：4008808776
邮箱：info@eoulu.com
• EM Labs Inc.（Kobe）
1-4-13 Mizukasadori, Nagata
邮编：653-0842
电话：+81-50-5370-0262
邮箱：info@emlabs.jp
• MPI Corporation（Chupei）
No. 155 Chungho Street
邮编：302
电话：+886-3-555-1771
传真：+886-3-551-8381
邮箱：info@mpi-corporation.com
官网：www.mpi-corporation.com/ast
• NOFFZ（Tönisvorst）
Vorster Strasse 238
邮编：47918
电话：+49 2151-99878-0
邮箱：info@noffz.com
• Power Technology Solutions（Santa Clara）
3048 Scott Blvd
邮编：95054
电话：650-308-8091 ext:
传真：408-727-0827
邮箱：inquiries@pwrts.com
• Resillion（Hasselt）
Kempische Steenweg 303
邮编：3500
电话：+32 498 92 01 71
邮箱：global-ci-sales@resillion.com
• Suzhou Link Ways Tech Co., Ltd.（Suzhou）
16F, Block B, Jin Shi Wang Hu Building, No. 18, Jia Rui alley, SIP
邮编：215021
电话：+86 512 6602 8998
• 上海凌测电子科技有限公司（上海）
峨山路91弄120号陆家嘴软件园8号楼401A室浦东新区
邮编：200127
电话：021-61090608
邮箱：yue.lin@merlintest.com.cn
• 上海北汇信息科技有限公司（上海市）
秀路100号虹桥总部1号4号楼3C闵行区紫
邮编：201103
电话：021-34716271
邮箱：info@polelink.com
官网：polelink.com
• 上海怿星电子科技有限公司（上海市）
钦州北路1199号智汇园87号楼5F室徐汇区
邮编：200233
电话：021-64955659
邮箱：biz@e-planet.cn
• 东昇电磁兼容技术(深圳)有限公司（深圳市）
福田中心区26-3路中国凤凰大厦2栋25G
邮编：518026
电话：0755-82792411
邮箱：sales@jstoyo.cn
• 南京派格测控科技有限公司（南京市）
建邺区建邺人才服务大厦16楼
邮编：210019
电话：4008920858
邮箱：sales@pgtec.cn
官网：pgtec.cn
• 南京纳特通信电子有限公司（南京市）
江宁开发区临淮街20号
邮编：210012
电话：025-84471796
邮箱：sales@rflight.cn
• 深圳市研辰科技有限公司（深圳市）
益田路3008号皇都广场C座2815室福田区
邮编：518048
电话：0755-82828703
邮箱：roger_huang@ascentest.com
原厂翻新与二手仪器
• 是德科技原厂二手仪器商城（Keysight Certified Pre-Owned）：www.keysight.com/used/cn/zh/
• 原厂翻新仪器经与新品相同的最终测试与校准，原厂保修最长 5 年；享 40%–90% 折扣，另有线上 5% / 教育 15% 优惠
| U2049XA-UK6 | Commercial calibration certificate with test data | |
| U2049XA-1A7 | Calibration + Uncertainties + Guardbanding (Not Accredited) | |
| U2049XA-A6J | ANSI Z540-1-1994 Calibration |
| U2049XA-100 | 10MHz - 33GHz LAN power sensor (without TVAC compliant) | |
| U2049XA-TVA | LAN power sensor 10MHz - 33GHz with thermal vacuum option |
| U2035A | LAN sensor casing | |
| U2036A | TVAC sensor bracket (for option TVA only) |
| U2032A | Trigger cable BNC male to SMB female 50ohm, 1.5meter length | |
| U2033A | TVAC Trigger cable BNC Male to SMB female, 50ohm, 1.5m | |
| U2034A | LAN cable, 5ft (1.5m) | |
| U2034B | LAN cable, 10ft (3m) | |
| U2034C | LAN cable, 16.4ft (5m) | |
| U2034D | LAN cable, 50ft (15.2m) | |
| U2034E | LAN cable, 100ft (30.5m) | |
| U2034F | LAN cable, 200ft (61m) | |
| U2037A | TVAC LAN cable, 5ft (1.5m) | |
| U2037B | TVAC LAN cable, 10ft (3m) | |
| U2037C | TVAC LAN cable, 16.4ft (5m) | |
| U2037D | TVAC LAN cable, 50ft (15.2m) | |
| U2037E | TVAC LAN cable, 100ft (30.5m) | |
| U2037F | TVAC LAN cable, 200ft (61m) |
| U2032A | Trigger cable BNC male to SMB female 50ohm, 1.5meter length | |
| U2033A | TVAC Trigger cable BNC Male to SMB female, 50ohm, 1.5m |
| U2034A | LAN cable, 5ft (1.5m) | |
| U2034B | LAN cable, 10ft (3m) | |
| U2034C | LAN cable, 16.4ft (5m) | |
| U2034D | LAN cable, 50ft (15.2m) | |
| U2034E | LAN cable, 100ft (30.5m) | |
| U2034F | LAN cable, 200ft (61m) |
| U2037A | TVAC LAN cable, 5ft (1.5m) | |
| U2037B | TVAC LAN cable, 10ft (3m) | |
| U2037C | TVAC LAN cable, 16.4ft (5m) | |
| U2037D | TVAC LAN cable, 50ft (15.2m) | |
| U2037E | TVAC LAN cable, 100ft (30.5m) | |
| U2037F | TVAC LAN cable, 200ft (61m) |
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758