ONETEST 欢迎您

厂商登录 | 入驻

登录 | 注册 购物车 微信公众号
请完成安全验证

类似产品

DNA800 5kHz至4.5/8.5/14GHz 2端口矢量网络分析仪 125dB动态范围|普源精电
DNA800 系列是普源精电推出的双端口矢量网络分析仪含 DNA804(5 kHz~4.5 GHz)、DNA808(5 kHz~8.5 GHz)、DNA814(5 kHz~14 GHz)三个型号10 Hz 中频带宽下系统动态范围最高 115 dB(规格值)、125 dB(典型值)迹线噪声低至 0.005 dBrms频率分辨率 1 Hz;中频带宽 1 Hz~3 MHz;最大输出功率 10 dBm支持 SOLT、OSL、Enhanced Response 等校准方式;兼容机械校准件与 ECAL 电子校准件集合 S 参数、阻抗、驻波、TDA 时域分析、夹具嵌入/去嵌、天线测试等功能整机 1.9 kg、7 英寸 1024×600 触控屏;支持 SCPI 指令与 Web Control 远程操作
DNA6000 5kHz至8.5/14/20/26.5GHz 2/4端口矢量网络分析仪 127dB动态范围|普源精电
DNA6000 系列是普源精电推出的高端矢量网络分析仪每档频率上限提供 2 端口与 4 端口配置10 Hz 中频带宽下系统动态范围最高 120 dB(规格值)、127 dB(典型值)迹线噪声低至 0.003 dBrms频率分辨率 1 Hz;中频带宽 1 Hz~10 MHz;最大输出功率 10 dBm支持 SOLT、OSL、Enhanced Response 等校准方式兼容机械校准件与 ECAL 电子校准件;1 英寸多点触控屏、256 GB 内部存储接口含 LAN、USB 3.0、HDMI、GPIB 与 Application I/O
DNA5000 5kHz至4.5/8.5/14/20/26.5GHz 2端口矢量网络分析仪 127dB动态范围|普源精电
DNA5000 系列是普源精电推出的双端口矢量网络分析仪10 Hz 中频带宽下系统动态范围最高 120 dB(规格值)、127 dB(典型值)迹线噪声低至 0.0045 dBrms频率分辨率 1 Hz;中频带宽 1 Hz~10 MHz;最大输出功率 10 dBm支持 SOLT、OSL、Enhanced Response 等校准方式兼容机械校准件与 ECAL 电子校准件1 英寸多点触控屏、256 GB 内部存储;整机
M9372A 300kHz至9GHz 矢量网络分析仪 115dB|是德科技

M9372A 300kHz至9GHz 矢量网络分析仪 115dB|是德科技 (在产)

产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案

是德科技|KEYSIGHT
PXI 矢量网络分析仪,300 kHz 至 9 GHz
PXI 模块化矢量网络分析仪
产品简介
Keysight M9372A PXIe 矢量网络分析仪是一款仅占用一个插槽的完整双端口 VNA。它可作为双端口 VNA 使用,也可通过多个模块配置为多端口或多工位测量
核心参数
• 201 点单次扫描最快速度:6 ms
• 动态范围:115 dB
• 最高频率:9 GHz
• 输出功率:7 dBm
• 应用:多端口测试、多工位
• 组件:电缆、天线、连接器、滤波器
• 内置端口数:2
• 最低频率:300 kHz
• 形态:PXIe,模块化
• VNA 系列:PXI VNA
• VNA 类型:模块化
• 内置源数量:1.000000
• 内置源数量:1
• 仪器类型:模块化
• 类型:模块化
• 平台:PXIe
• 最大输出功率:7 dBm
• 最大源数量:1
• 可配置测试端口:0
• 迹线噪声:0.003 dB rms
资源下载
以上内容与指标均取自是德科技(KEYSIGHT)官网该产品详情页与官方产品资料,未标注口径的为厂家公布值。
是德科技|KEYSIGHT · onetest 仪器资源库

 

 

是德科技 | KEYSIGHT
M9372A 300kHz至9GHz 矢量网络分析仪 115dB 详细指标
Modular PXI Vector Network Analyzers
一、技术规格
M9370A
300 kHz to 4 GHz
M9371A
300 kHz to 6.5 GHz
M9372A
300 kHz to 9 GHz
M9373A
300 kHz to 14 GHz
M9374A
300 kHz to 20 GHz
M9375A
300 kHz to 26.5 GHz
Drive down 尺寸测试
When you need to measure basic S-parameters, the right mix of speed, performance and footprint gives you an edge. Sharpen your edge with the
Get more VNA in less space
条件:characterize many devices -- two-port or multiport -- using a single PXI chassis.
The Keysight PXI VNA is a full two-port VNA that fits in just one slot. The PXI VNA also performs fast, accurate measurements and reduces your cost-of-test by letting you simultaneously
It offers the best PXI VNA performance on key specifications such as dynamic range, measurement speed, and trace noise. Each module is a completely independent two-port
network analyzer and up to 16 modules can be
added to a chassis for multi-site and multiport applications. All ports are fully synchronous so multiple ports can be measured simultaneously with multiport error correction applied. For more
information, see page
30.
Achieve confidence and continuity in measurements
The M937xA extends Keysight’s expertise in
metrology to the modular form factor. It provides the same quality results you have come to expect in our vector network analyzers. Here are a few examples of ways that we continue to provide
measurement quality and continuity
• Dynamic range: >
114 dB at 9 GHz
> 110 dB at 20 GHz
• Trace noise: <
0.003 dB
• Sweep speed: 18 to 33 msec across
401
• Maximum leveled power: up to +7 dBm
• Stability
0.005 dB/°C up to 4 GHz
<0.02 dB/°C up to 26.5 GHz
• Electronic calibration (ECal): enables fast, easy and accurate calibrations
Maintain hardware compliance
条件:package. It is an ideal deployment platform for many automated test systems.
Pay for only the frequency range you need with the widest choice of frequency ranges from 300 kHz up to 26.5 GHz.
The M937xA is PXI compliant and designed to
benefit from fast data interfaces. The PXI VNA can be integrated with other test and automation modules in either a PXIe or Hybrid slot. The PXI format offers high performance in a small, rugged
Software platform
条件:PNA. Users can quickly configure the instrument parameters and perform calibrations.
Keysight soft front panels provide easy to use instrument communications. The graphical user interface guides developers through module setup using a similar look and feel as the popular
IO Libraries
条件:system, whether they are PXI, PXIe, or AXIe. From here you can view information about the installed software or launch the modules’ soft front panel directly from Keysight Connection Expert (KCE).
Keysight IO Libraries Suite offers fast and easy connection to both traditional and modular instruments. The Keysight IO Libraries Suite helps you by displaying all of the modules in your
KCE offers an easy way to find the correct driver for your instrument.
The M937xA PXI VNA is supplied with a
comprehensive portfolio of module drivers, documentation, examples, and software tools to help you quickly develop test systems with your software platform of choice. The module comes
with IVI-COM, IVI-C, LabVIEW and MATLAB software drivers that work in the most popular
Easy software integration
To help you get started and complete complex tasks quickly, the module software support provides context sensitive help, complete documentation and code examples that allow
quick module set up. These code examples can be easily modified, so that the PXI VNA can be quickly integrated into a test system. Included are application code examples for LabVIEW,
Visual Basic, and MATLAB
The graphical user interface guides test engineers using a similar look and feel as Keysight’s popular
Table of Contents
条件:Table 7. Nominal power (preset power level) .............................................. 13
Definitions .........................................................................................................
6
System Specifications ................................ ................................ ...................
7
Table 1. Frequency Information ......................................................................
7
Table 2. Noise floor and dynamic range .........................................................
8
Corrected performance ................................ ................................ ................
9
Table 3. With N4691B electronic calibration module ...................................
9
Table 4. With 85052D standard mechanical 3.5 mm calibration kit ........
11
Uncorrected System Performance ................................ .............................
12
Table 5. Uncorrected error terms - specification ........................................
12
Test Port Output ................................ ................................ .........................
13
Table 6. Maximum output port power ..........................................................
13
Table 8. Power Range ....................................................................................
13
Table 9. Power level accuracy .......................................................................
14
Table 10. Source harmonics ..........................................................................
14
Table 11. Non-harmonic spurs .....................................................................
15
Table 12. Phase noise ....................................................................................
15
Test Port Input ................................ ................................ ............................
16
Table 13. Test port input damage level ........................................................
16
Table 14. Receiver compression level for 0.1 dB compression (typical) ...
16
Table 15. Receiver compression versus test port power level (specified)
16
Table 16. Receiver Level Accuracy ...............................................................
17
Table 18. Magnitude trace noise (1 kHz IF bandwidth, -5 dBm power) ....
19
Table 19. Magnitude trace noise (characteristic performance
+6 dBm
power) .............................................................................................................
19
Table 20. Magnitude trace noise (typical performance, +6 dBm power) ..
19
Table 21. Phase trace noise (1 kHz IF bandwidth, -5 dBm power) ............
19
Table 22. Phase trace noise (characteristic performance
+6 dBm power)20
Table 23. Phase trace noise (typical performance, +6 dBm power) ..........
20
Table 24. Temperature stability (typical) ......................................................
20
Dynamic Accuracy................................ ................................ .......................
21
Table 25. Dynamic Accuracy 4 GHz to 26.5 GHz ........................................
21
General Information ................................ ................................ ....................
23
Table 26. System requirements ....................................................................
23
Table 27. Environmental and Physical Specifications .................................
24
Table 28. Regulatory and Safety Compliance ..............................................
25
Table 29. Physical Size and Weight ..............................................................
26
Table 30. Electrical Power .............................................................................
26
Table 31. Front Panel Information ................................................................
26
Table 32. Measurement speed (milliseconds) .............................................
28
Table 33. Measurement capabilities .............................................................
30
Table 34. Software .........................................................................................
35
条件:distribution, measurement uncertainties, and changes in performance due to environmental conditions. All
46°C (unless otherwise stated). The following conditions must be met:
▪ Instrument has been turned on for 60 minutes with PXI VNA application running.
Warranted performance. Specifications include guardbands to account for the expected statistical performance
specifications and characteristics apply over a 25°C ±5°C range ambient and module temperature between
33°C to
▪ Instrument is within its calibration cycle
▪ Instrument remains at a stable surrounding environment temperature (between
-10°C to 55°C) for 60 minutes
Characteristic (char.)
条件:the field and is not covered by the product warranty. A characteristic includes the same guardbands as a specification.
A performance parameter that the product is expected to meet before it leave s the factory, but that is not verified in
Characteristic (char.)
Expected performance of an average unit at a stable temperature between 25°C
±5°C for 60 minutes prior to turn-on
and during operation; does not include guardbands. It is not covered by the product warranty. The instrument must be
Corrected (residual)
条件:how well "known" they are, plus system repeatability, stability, and noise.
Indicates performance after error correction (calibration). It is determined by the quality of calibration standards and
Uncorrected (raw)
Indicates instrument performance without error correction. The uncorrected performance affects the stability of a
条件:Temperatures referred to in this document are defined as follows:
▪ Full temperature range = individual module temperature of 10°C to 70°C, as reported by the module, and
environment temperature of 0°C to 55°C.
▪ Controlled temperature range = individual module temperature of 33°C to 46°C, as reported by the module, and
environment temperature of 20°C to 30°C.
Frequency break points
条件:the two specifications at that frequency, unless otherwise indicated.
For all tables in this document, the specified performance at the exact frequency of a break is the degraded value of
二、系统规格
Table
1. Frequency Information
型号编号频率范围
M9370A
300 kHz to 4 GHz
M9371A
300 kHz to 6.5 GHz
M9372A
300 kHz to 9 GHz
M9373A
300 kHz to 14 GHz
M9374A
300 kHz to 20 GHz
M9375A
300 kHz to 26.5 GHz
三、频率范围规格
300 kHz to 2.5 GHz
1 Hz
> 2.5 to 5 GHz
2 Hz
> 5 to 10 GHz
3 Hz
> 10 to 20 GHz
6 Hz
> 20 GHz
12 Hz
频率参考规格典型值
条件:System impedance 50 Ω (nominal) 75 Ω with appropriate adapter and calibration kit
Accuracy
±1 ppm
Aging rate <
3.5 ppm/year
Temperature stability ±1 ppm over
0 to 55 ºC
Table
2. Noise floor and dynamic range
Frequency range Noise Floor1 (dBm)
Dynamic Range2
(dB) (specification)
Dynamic Range3
Effective Dynamic
条件:the dynamic range. Crosstalk only limits the dynamic range for IF bandwidths < 1 kHz.
Range4 (dB)
(characteristic) 300 kHz to &lt; 10 MHz -- -- 111 97 10 to &lt; 250 MHz -98 98 110 95 250 MHz to 1 GHz -108 115 122
114
&gt; 1 to 4 GHz -108 115 122
115
&gt; 4 to 6.5 GHz -108 115 122
115
&gt; 6.5 to 9 GHz -108 114 121
114
&gt; 9 to 14 GHz -108 114 120
110
&gt; 14 to 18 GHz -108 112 119
100
&gt; 18 to 20 GHz -108 110 118
98
&gt; 20 to 24 GHz -98 95 104
82
&gt; 24 to 26.5 GHz -- -- 95
65
1 Noise floor in a
10 Hz IF bandwidth
2 System dynamic range = source maximum output power minus receiver noise floor at 10 Hz IF
bandwidth. Does not include single module crosstalk effects. 3 System dynamic range = source maximum output power minus receiver noise floor at 10 Hz IF bandwidth. Does not include single module crosstalk effects. 4 Effective dynamic range is when the crosstalk is greater than the noise floor, and thus crosstalk limits
Custom Uncertainty Calculator
条件:either the N4691B Electronic Calibration Module, or the 85052D Standard Mechanical Calibration Kit.
This document provides technical specifications for the corrected performance of the PXI VNA using
To determine transmission and reflection uncertainty curves with other calibration kits, p lease download
Corrected performance
Table
3. With N4691B electronic calibration module5
Corrected error terms (dB) - 300 kHz to 24 GHz
传输跟踪反射跟踪
条件:5 Measured with 10 Hz IF bandwidth, no averaging applied to data, environmental temperature = 23 °C
(±3 °C) with < 1 °C deviation from calibration temperature, isolation calibration performed.
Mag Phase ° Mag Phase ° 300 kHz to &lt; 2 MHz 31 29 29 ±0.21 ±1.4 ±0.12 ±0.74 2 MHz to 1 GHz 41 36 41 ±0.021 ±0.14 ±0.061
±0.40
&gt; 1 to 2 GHz 52 47 52 ±0.0066 ±0.044 ±0.020
±0.14
&gt; 2 to 4.5 GHz 48 45 48 ±0.015 ±0.095 ±0.031
±0.20
&gt; 4.5 to 6.5 GHz 48 45 48 ±0.020 ±0.14 ±0.031
±0.20
&gt; 6.5 to 9 GHz 48 45 45 ±0.033 ±0.22 ±0.031
±0.20
&gt; 9 to 14 GHz 46 42 43 ±0.053 ±0.35 ±0.041
±0.27
&gt; 14 to 20 GHz 46 42 42 ±0.067 ±0.44 ±0.041
±0.27
&gt; 20 to 24 GHz 44 40 40 ±0.11 ±0.69 ±0.051
±0.34
Reflection 不确定度 (magnitude 和相位)
Table 4. With 85052D standard mechanical 3.5 mm calibration kit
6
Corrected error terms (dB) – 300 kHz to 24 GHz
传输跟踪反射跟踪
条件:Transmission uncertainty (magnitude and phase) 6 Measured with 10 Hz IF bandwidth, no averaging applied to data, environmental temperature = 23 °C (±3 °C) with < 1 °C deviation from calibration temperature, isolation calibration performed.
Mag Phase ° Mag Phase ° 300 kHz to &lt; 2 MHz 42 36 41 ±0.069 ±0.46 ±0.0030 ±0.020 2 MHz to 1 GHz 42 36 42 ±0.019 ±0.13 ±0.0030
±0.020
&gt; 1 to 2 GHz 42 36 42 ±0.021 ±0.14 ±0.0030
±0.020
&gt; 2 to 4 GHz 38 30 38 ±0.055 ±0.37 ±0.0041
±0.027
&gt; 4 to 6.5 GHz 38 30 38 ±0.089 ±0.59 ±0.0041
±0.027
&gt; 6.5 to 9 GHz 36 28 35 ±0.16 ±1.1 ±0.0080
±0.053
&gt; 9 to 14 GHz 36 28 35 ±0.2 ±1.4 ±0.0080
±0.053
&gt; 14 to 20 GHz 36 28 35 ±0.24 ±1.6 ±0.0080
±0.053
&gt; 20 to 24 GHz 30 25 29 ±0.45 ±3.0 ±0.011
±0.073
Uncorrected 系统性能
条件:Specifications apply to following conditions:
• Over environmental temperature of 25 °C
±5 °C
• Cable loss not included in transmission tracking
条件:• Cross-talk measurement conditions: normalized to a thru, measured with shorts on all ports, 10
Hz IF bandwidth, averaging factor of 8, alternate mode, source power set to the specified
反射跟踪 (典型值)
Cross-talk (typical) 300 kHz to &lt; 2 MHz 7 9 9 ± 2 ± 2 97 2 MHz to 1 GHz 20 19 21 ± 2 ± 2
95
&gt; 1 to 2 GHz 20 20 19 ± 2 ± 2
123
&gt; 2 to 4 GHz 18 20 13 ± 2 ± 2
121
&gt; 4 to 6.5 GHz 15 15 11 ± 2 ± 2
121
&gt; 6.5 to 9 GHz 10 11 8 ± 2 ± 2
119
&gt; 9 to 14 GHz 9 9 7 ± 2 ± 2
110
&gt; 14 to 20 GHz 4 6 6 ± 2 ± 2
98
&gt; 20 to 24 GHz 3 5 4 ± 2.5 ± 2.5
82
测试端口输出
Table
6. Maximum output port power
测试端口输出
条件:Table 7. Nominal power (preset power level)
FrequencyRangeSpecificationTypical
300 kHz to &lt; 10 MHz --+3 dBm
10 to &lt;250 MHz0 dBm+3 dBm
250 MHz to 6.5 GHz +7 dBm+10 dBm
&gt; 6.5 to 9 GHz +6 dBm+9 dBm
&gt; 9 to 14 GHz +6 dBm+8 dBm
&gt; 14 to 18 GHz +4 dBm+7 dBm
&gt; 18 to 20 GHz +2 dBm+6 dBm
&gt; 20 to 24 GHz -3 dBm+1 dBm
&gt; 24 to 26.5 GHz ---5 dBm
四、型号规格
All models
-5 dBm
Table
8. Power Range
FrequencyRangeSpecificationTypical
300 kHz to &lt;10 MHz --+3 dBm to-40 dBm
10 to &lt;250 MHz0 dBm to-40 dBm
250 MHz to 6.5 GHz+7 to -40 dBm
&gt; 6.5 to 9 GHz+6 to -40 dBm
&gt; 9 to 14 GHz+6 to -40 dBm
&gt; 14 to 18 GHz+4 to -40 dBm
&gt; 18 to 20 GHz+2 to -40 dBm
&gt; 20 to 24 GHz-3 to -40 dBm
&gt; 24 to 26.5 GHz ---5 to -40 dBm
Table9. Power level accuracy
功率电平范围
Frequency range -40 dBm ≤ P &lt; dBm
-30
-30 dBm ≤ P &lt; max
端口 spec 功率
-40 dBm ≤ P &lt; dBm
-30
-30 dBm ≤ P &lt; max
port spec power 300 kHz to &lt; 2 MHz -- -- ±1.3 ±1.0 2 to &lt; 10 MHz -- -- ±2.5 ±2.2 10 to &lt; 250 MHz ±4.5 ±2.5 ±1.0
±0.7
250 MHz to 1 GHz ±1.5 ±1.5 ±0.4
±0.4
&gt; 1 to 6.5 GHz ±1.5 ±1.5 ±0.3
±0.3
&gt; 6.5 to 20 GHz ±1.5 ±1.5 ±0.5
±0.5
&gt; 20 to 24 GHz ±3.0 ±3.0 ±0.8
±0.8
&gt; 24 to 26.5 GHz -- -- ±1.8
±1.8
Programmable power resolution
0.01 dB typical
Table
10. Source harmonics7
端口 spec 功率
FrequencyRangeSpecificationTypical
300 kHz to &lt; 100 MHz ---6 dBc
100 MHz to 2 GHz ---6 dBc
2 to 4 GHz ---10 dBc
&gt; 4 to 6.5 GHz ---11 dBc
&gt; 6.5 to 14 GHz ---14 dBc
&gt; 14 to 20 GHz ---8 dBc
&gt; 20 to 26.5 GHz ---5 dBc
7 At maximum specified power, includes sub-harmonics.
Table11. Non-harmonic spurs8
端口 spec 功率
FrequencyRangeSpecificationTypical
300 kHz to &lt; 10 MHz ---44 dBc
10 MHz to 10 GHz ---36 dBc
&gt; 10 to 20 GHz ---30 dBc
&gt; 20 to 26.5 GHz ---24 dBc
Table12. Phase noise9
端口 spec 功率
条件:8 At nominal (preset) power of -5 dBm.
FrequencyRangeSpecificationTypical
300 kHz to &lt; 2 MHz ---100 dBc/Hz
2 MHz to 2.5 GHz ---90 dBc/Hz
&gt; 2.5 to 5 GHz ---84 dBc/Hz
&gt; 5 to 10 GHz ---78 dBc/Hz
&gt; 10 to 20 GHz ---72 dBc/Hz
&gt; 20 to 26.5 GHz ---66 dBc/Hz
9 Phase noise in dBc/Hz, for output ports1 or2; typical values for1 kHz, 10 kHz, and 100 kHz offsets.
测试端口输入
Table
13. Test port input damage level
五、频率范围规格
300 kHz to 26.5 GHz &gt; +20 dBm, &gt; ±35 VDC, &gt;
1000V ESD
Table
14. Receiver compression level for 0.1 dB compression (typical)
FrequencyRangeSpecificationTypical
300 kHz to &lt; 10 MHz -- &gt;+7 dBm
10 to &lt; 250 MHz -- &gt;+8 dBm
250 MHz to 1 GHz -- &gt;+12 dBm
&gt; 1 to 4 GHz -- &gt;+10 dBm
&gt; 4 to 6.5 GHz -- &gt;+8 dBm
&gt; 6.5 to 9 GHz -- &gt;+8 dBm
&gt; 9 to 14 GHz -- &gt;+6 dBm
&gt; 14 to 18 GHz -- &gt;+5 dBm
&gt; 18 to 20 GHz -- &gt;+10 dBm
&gt; 20 to 24 GHz -- &gt;+8 dBm
&gt; 24 to 26.5 GHz -- &gt;+4 dBm
Table15. Receiver compression versus test port power level (specified)
频率测试端口功率电平 (dBm)
Magnitude (dB) Phase (degrees) 10 MHz to 250 MHz 0 .15
1.1
&gt; 250 MHz to 1 GHz
7 .12 .9
&gt; 1 to 2 GHz
7 .12 .6
&gt; 2 to 4 GHz
7 .12 .7
&gt; 4 to 6.5 GHz
7 .12 .9
&gt; 6.5 to 9 GHz 6 .12
1.0
&gt; 9 to 14 GHz 6 .16
1.3
&gt;14 to 18 GHz 4 .16
1.5
&gt;18 to 20 GHz 2 .13
1.6
&gt;20 to 24 GHz -3 .11
1.0
Table
16. Receiver Level Accuracy
Frequency Range Accuracy at -5 dBm input power level
300 kHz to 10 MHz --
10 MHz to 26.5 GHz
±0.5 dB1
1 Factory or service calibration required. Calibration can be refreshed any time using service routine.
Accuracy across N-ports can be achieved with a multi-port cal.
Table
17. Noise floor (10 Hz IF bandwidth)
频率测试端口功率电平 (dBm)
FrequencyRangeSpecificationTypical
300 kHz to &lt; 10 MHz ---108 dBm
10 to &lt;250 MHz-98 dBm-107 dBm
250 MHz to 1 GHz -108 dBm-112 dBm
&gt; 1 to 4 GHz -108 dBm-112 dBm
&gt; 4 to 6.5 GHz -108 dBm-112 dBm
&gt; 6.5 to 9 GHz -108 dBm-112 dBm
&gt; 9 to 14 GHz -108 dBm-112 dBm
&gt; 14 to 20 GHz -108 dBm-112 dBm
&gt; 20 to 24 GHz -98 dBm-103 dBm
&gt; 24 to 26.5 GHz ---100 dBm
噪声底规格 lines 和典型值 measured 值
Table 18. Magnitude trace noise (1 kHz IF bandwidth
-5 dBm power)
噪声底规格 lines 和典型值 measured 值
FrequencyRangeSpecificationTypical
300 kHz to &lt; 10 MHz --0.0020 dB rms
10 MHz to 4 GHz 0.003 dB rms0.0010 dB rms
&gt; 4 to 6.5 GHz 0.003 dB rms0.0010 dB rms
&gt; 6.5 to 9 GHz 0.003 dB rms0.0010 dB rms
&gt; 9 to 14 GHz 0.003 dB rms0.0010 dB rms
&gt; 14 to 20 GHz 0.003 dB rms0.0010 dB rms
&gt; 20 to 24 GHz 0.006 dB rms0.0015 dB rms
&gt; 24 to 26.5 GHz --0.0020 dB rms
Table 19. Magnitude trace noise (characteristic performance+6 dBm power)
Frequency Range10 kHz IF bandwidth100 kHz IF bandwidth600 kHz IF bandwidth
250 MHz to 10 GHz0.0020 dB rms0.0055 dB rms0.0120 dB rms
&gt; 10 to 14 GHz0.0030 dB rms0.0075 dB rms0.0160 dB rms
Table 20. Magnitude trace noise (typical performance+6 dBm power)
Frequency Range10 kHz IF bandwidth100 kHz IF bandwidth600 kHz IF bandwidth
250 MHz to 10 GHz0.001 dB rms0.003 dB rms0.007 dB rms
&gt; 10 to 14 GHz0.002 dB rms0.004 dB rms0.008 dB rms
Table 21. Phase trace noise (1 kHz IF bandwidth-5 dBm power)
噪声底规格 lines 和典型值 measured 值
DescriptionSpecificationTypicalvalue
300 kHz to &lt; 10 MHz --0.020 deg
10 MHz to 4 GHz 0.030 deg0.010 deg
&gt; 4 to 6.5 GHz 0.030 deg0.010 deg
&gt; 6.5 to 9 GHz 0.030 deg0.010 deg
&gt; 9 to 14 GHz 0.030 deg0.010 deg
&gt; 14 to 20 GHz 0.030 deg0.010 deg
&gt; 20 to 24 GHz 0.060 deg0.015 deg
&gt; 24 to 26.5 GHz --0.020 deg
Table 22. Phase trace noise (characteristic performance+6 dBm power)
Frequency Range10 kHz IF bandwidth100 kHz IF bandwidth600 kHz IF bandwidth
250 MHz to 8.5 GHz0.010 deg.0.025 deg.0.060 deg.
&gt; 8.5 to 14 GHz0.020 deg.0.055 deg.0.120 deg.
Table 23. Phase trace noise (typical performance+6 dBm power)
Frequency Range10 kHz IF bandwidth100 kHz IF bandwidth600 kHz IF bandwidth
250 MHz to 8.5 GHz0.006 deg.0.014 deg.0.033 deg.
&gt; 8.5 to 14 GHz0.010 deg.0.030 deg.0.060 deg.
Table24. Temperature stability (typical)
Frequency range Magnitude stability Phase stability 300 kHz to &lt; 10 MHz ±0.005 dB/°C ±0.20 Degree/°C10 MHz to4 GHz±0.005 dB/°C ±0.10 Degree/°C
&gt; 4 to 6.5 GHz ±0.010dB/°C±0.15 Degree/°C
&gt; 6.5 to 9 GHz ±0.015 dB/°C±0.20 Degree/°C
&gt; 9 to 14 GHz ±0.015 dB/°C±0.40 Degree/°C
&gt; 14 to 20 GHz ±0.020 dB/°C±0.50 Degree/°C
&gt; 20 to 26.5 GHz ±0.020 dB/°C±0.60 Degree/°C
Dynamic Accuracy
条件:Accuracy of the test port input power relative to the reference input power level.
Table 25. Dynamic Accuracy
4 GHz to 26.5 GHz
Although labeled ‘M9375A’, these graphs apply to all models.
Dynamic accuracy
4 GHz (magnitude and phase)
Dynamic accuracy
6.5 GHz (magnitude and phase)
Dynamic accuracy
9 GHz (magnitude and phase)
Dynamic accuracy
14 GHz (magnitude and phase)
Dynamic accuracy
20 GHz (magnitude and phase)
Dynamic accuracy
26.5 GHz (magnitude and phase)
General Information
Table
26. System requirements
Processor requirement
Operating systems Windows
10 (64 bit)
Processor speed Intel Core i7
10th Generation or later recommended
Available memory 4 GB minimum
16 GB recommended
Available disk space
4 GB minimum
Display resolution 1024 X
768 minimum
USB USB
3.0 port directly connected to Intel chipset
Instrument drivers
Keysight IO libraries Keysifht IO Libraries Suite: 2022 update
1 (18.2.28014.7) or later
Instrument drivers · Table 27. 环境和物理规格
条件:limited to, temperature, humidity, shock, vibration, altitude, and power line conditions.
Description Samples of this product have been type tested in accordance with the Keysight
Environmental Test Manual and verified to be robust against the environmental
stresses of Storage, Transportation and End-use; those stresses include, but are not
Test Methods are aligned with IEC
60068-2 and levels are similar to MIL-PRF-28800F
Class
3.
温度工作
Non-operating 0 to 55 °C ambient
10 to 70 °C module temperature
-40 to +70 °C
Humidity Type tested at 95%
+40 °C
Altitude – Operating Up to 15,000 feet (4,572 meters)
Altitude – Non-operating Up to 15,000 feet (4,572 meters)
Intrusion protection IP 30 IEC/EN
60529
Warm-up time
60 minutes
LO In and LO Out
Trig In and Trig. Out, Trig. Ready
3.5 mm female
SMB male
Table
28. Regulatory and Safety Compliance
Complies with the essential requirements of the European EMC Directive as well as
current editions of the following standards (dates and editions are cited in the
Declaration of Conformity)
条件:professional use and is for use in electromagnetic environments outside of t he home.
• IEC/EN
6132-1
• CISPR Pub 11 Group
1, class A
• AS/NZS CISPR
11
• ICES/NMB-001
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada.
South Korean Class A EMC declaration: This equipment is Class A suitable for
以上指标摘自厂家官方数据手册,完整定义、测试条件与保证值口径以手册为准。完整指标、测试条件与定义口径请见产品页「软件和手册 | 白皮书」栏目中的官方数据手册。
是德科技 | KEYSIGHT · onetest 仪器资源库
全部

 

是德科技官方渠道


官方渠道(官网 / 热线 / 邮箱)


• 销售服务热线

800-810-0189(座机)/400-810-0189(手机) 工作时间 周一至周五 8:30-17:30


• 热线传真

800-820-2816(座机)/400-820-3863(手机)


• 亚洲区支持邮箱 tm_asia@keysight.com


• 服务与支持邮箱

instruments_services@keysight.com


• 官网

www.keysight.com(中国站 www.keysight.com.cn)


全国办事处


• 北京总部

是德科技(中国)有限公司 北京市朝阳区望京北路3号

电话:(010) 64397888

传真:(010) 64390278

邮编:100102


• 上海分公司

上海市虹口区四川北路1350号中信泰富申虹广场5楼、16-19楼

电话:(021) 36127688

传真:(021) 36127188

邮编:200080


• 广州分公司

广州市天河北路233号中信广场66层07-08室

电话:(020) 38113988

传真:(020) 86695074

邮编:510613


• 深圳分公司

深圳市福田中心区福华一路六号免税商务大厦3楼

电话:(0755) 83079588

传真:(0755) 82763181

邮编:518048


• 成都分公司

成都高新区南部园区天府四街116号

电话:(028) 83108888

传真:(028) 85330830

邮编:610041


• 西安分公司

西安市碑林区南关正街88号长安国际大厦D座5/F

电话:(029) 88867770

传真:(029) 88861330

邮编:710068


• 中国香港

是德科技香港有限公司 中国香港北角电气道169号25楼

电话:(852) 31977777

传真:(852) 25069292 香港热线 800-938-693


• 维修 / 校准服务中心

中国大陆 北京 / 成都 / 苏州 服务热线 800-810-0189 / 400-810-0189


授权分销商


• 上海信果电子科技有限公司(上海)

上海市沪闵路8075号虹梅商务大厦6楼609室

邮编:200233

电话:021-64518399

传真:021-54560890

邮箱:jason.wu@signalgroup.com.tw

官网:www.signalgroup.com.cn


• 上海精测电子有限公司(上海)

上海市北京东路668号西楼15E

邮编:200001

电话:13916371522

传真:021-53086102

邮箱:yangzhen@jingce.com

官网:www.jingce.com


• 北京东方中科集成科技股份有限公司(北京)

北京市海淀区复兴路69号院12号楼2层、7层 邮政编码:100039

邮编:100039

电话:400-650-5566

传真:010-68728001

邮箱:zhangzp@oimec.com.cn

官网:www.dfzk.com/br_keysight.html


• 北京千聚科技发展有限公司(北京)

北京市海淀区西三旗花园雪梨澳乡A区23-4号

邮编:100085

电话:010-82907162

邮箱:zhuqihui@qianjukeji.com.cn

官网:www.qianju.net.cn


• 北京金龙翌阳科技发展有限公司(北京)

北京市海淀区大柳树路17号富海大厦2001室

邮编:100086

电话:010-62167379/6213538

邮箱:zhy@yy17.com

官网:www.yy17.com


• 厦门同昌源电子有限公司(厦门)

厦门市湖里区悦华路215号综合楼二楼C单元

邮编:361000

电话:0592-5663715

传真:0592-2236795

邮箱:tcydz@xmtcy.com

官网:www.xmjns.com


• 合肥新普仪测科技有限公司(合肥)

安徽省合肥市长江路53号长江大厦1102室

邮编:230001

电话:+86(0551)65177518 ext:

传真:+86(0551)6260 7155

邮箱:hfsimple@mail.hf.ah.cn

官网:www.hfxp.com.cn


• 品展国际贸易(上海)有限公司(上海)

上海外高桥保税区泰谷路18号1号楼1105A室

邮编:200003

电话:+86(0512) 6808 6023

传真:+86(0512) 6808 6025

邮箱:melody@chtek.com.tw

官网:chtek.com.tw


• 广州康祺科技发展有限公司(广州)

广州市天河区华强路1号珠控国际中心8层06单元

邮编:510623

电话:020-38295200

传真:020-38295122

邮箱:baobao@kontchi.com

官网:www.kontchi.com


• 广州科欣仪器有限公司(广州)

广州市黄埔区黄埔大道933号209室

邮编:510700

电话:86-20-38699788

传真:86-20-34395932

邮箱:cs@gzkexin.com.cn

官网:www.gzkexin.com.cn


• 成都安诚迅飞电子科技有限公司(成都)

成都市武侯区人民南路四段27号1栋1单元 24层3号

邮编:610041

电话:028-86027579

邮箱:jincai.he@ancentest.com

官网:www.ancentest.com


• 新亚制程(浙江)股份有限公司(深圳)

深圳市福田区中康路卓越城梅林中心广场(北区)一期1栋3楼

邮编:518035

电话:0755-23818536

传真:0755-23818625

邮箱:wangrongbin@sunyes.cn

官网:www.sunyes.cn


• 无锡市邦达测量科技有限公司(无锡)

江苏省无锡市新区长江北路112号

邮编:214028

电话:0510-85258521 ext:

邮箱:bdyiqi@bdyiqi.com

官网:www.bdyiqi.com


• 武汉力德仪测科技有限公司(武汉)

武汉市光谷大道54号国际企业中心四期A座501室

邮编:430074

电话:027-85481090 ext:

邮箱:liuyang@leader-e.com

官网:www.leader-e.com


• 苏州工业园区贝奇仪器有限公司(苏州)

苏州工业园区通园路398号海逸大厦A402室

邮编:215006

电话:0512-62883832

邮箱:szbeiqi@szbeiqi.net

官网:www.szbeiqi.net


• 青岛鲁芯仪器有限公司(青岛)

青岛市福州北路135号鼎都1号写字楼328室

邮编:266007

电话:15953279543

传真:0532-80669058-830

邮箱:gaochangyuan@qdluxin.com

官网:www.qdluxin.com


• Avnet Electronics Marketing(Phoenix)

2211 South 47th Street

邮编:85034

电话:+65 6289 9164

邮箱:Josephine.Cheong@avnet.com

官网:OnlineSupportAsia@Avnet.com


• RFMW, Ltd.(San Jose)

188 Martinvale Lane

邮编:95119

电话:#09-129

邮箱:sales@rfmw.asia

官网:www.rfmw.com


• 沈阳实拓科技有限公司(沈阳)

沈阳市和平区三好街35号8层

邮编:110004

电话:024-23843636

传真:024-23905232

邮箱:lf@shituokeji.cn

官网:www.shituokeji.cn


• 領先科儀有限公司(香港)

新界荃灣海盛路3號TML廣場21樓B5室

邮编:.

电话:852-31523600

传真:852-31523608

邮箱:allenma@advanceinst.com

官网:www.advanceinst.com


租赁合作伙伴


• 深圳君鉴科技股份有限公司(深圳市)

光明街道观光路华强创意产业园3栋B座12楼光明新区

邮编:518107

电话:400-860-3035

邮箱:shichang@chrent.com

官网:www.chrent.com


• 益莱储(北京)检测设备租赁有限公司(北京市)

来广营高科技产业园区4号楼3层301朝阳区

邮编:100102

电话:400-819-2800

邮箱:jim.chen@electrorent.com

官网:www.electrorent.com/cn


• 北京东方中科集成科技股份有限公司科技租赁事业部(北京市)

北京市海淀区阜成路67号银都大厦12层

邮编:100142

电话:400-650-5566

传真:010-68728001

邮箱:wangml@oimec.com.cn

官网:www.dfzk.com/rent


• 客而禧设备租赁(上海)有限公司(Shanghai)

徐汇区古美路1515号19号楼903室

邮编:201102

电话:021-54453166

邮箱:krc@krcchina.com

官网:www.krcchina.com


• 深圳市瑞普高电子有限公司(深圳市)

天安云谷产业园一期3栋D座1505-1506龙岗区

邮编:518129

电话:0755-29050100

邮箱:rickluo@ruipugao.com

官网:www.ruipugao.com


• 苏州锦凡精密仪器科技有限公司(苏州)

苏州市高新区滨河路625号创业大厦5幢505

邮编:215011

电话:18914031336

邮箱:18914031336@jfsz.net


解决方案合作伙伴


• Tokyo Weld Co., Ltd.(Ota-ku)

2-28-1 Kitamagome

邮编:143-0021

电话:81-3-3775-4331

传真:81-3-3775-4359

邮箱:d-imai@tokyoweld.com

官网:www.tokyoweld.com


• 上海恒榉电子科技有限公司(Shanghai)

上海市奉贤区南桥镇西闸公路1036号3栋2层

邮编:201401

电话:18112779808

邮箱:salesvalue@everise-hj.com

官网:everise-hj.com


• 佳燁科技股份有限公司(Ghiatek)(桃園市龜山區)

光明街243巷2號

邮编:33372

电话:+886-3-350-9960

传真:+886-3-320-3475

邮箱:support@ghiatek.com

官网:www.ghiatek.com.tw


• 华美博科技(北京)有限公司(北京市)

蓝靛厂东路2号金源时代商务中心C座9A2海淀区

邮编:100097

电话:010-88598732

邮箱:sino@sino-microtech.com

官网:www.sino-microtech.com


• 和创联合科技(北京)有限公司(北京市)

中关村东路18号财智国际大厦A座1612海淀区

邮编:100083

电话:400 650 7802

邮箱:info@hisuntest.com

官网:www.hisuntest.com


• 昆山捷得立电子有限公司(昆山市)

登云路288号海创大厦C座25楼

邮编:215316

电话:0512-36831748

邮箱:sales@jiedeli-china.com

官网:www.jiedeli-china.com


• 深圳市捷泰普科技有限公司(深圳市)

宝安区西乡街道前进二路桃源居南面深圳市智汇创新中心A座216室

邮编:518126

电话:0755-83908488

邮箱:sales@jtptech.cn

官网:www.jtptech.cn


• 深圳市易捷测试技术有限公司(深圳市)

福虹路9号世贸广场C座1203室福田区

邮编:518033

电话:0755-83698930

邮箱:dongni.zhang@gbit.net.cn

官网:gbit.net.cn


• 深圳市泰仕捷科技有限公司(深圳市)

松岗大道7号汉海达大厦616室宝安区

邮编:518105

电话:0755-27128586

邮箱:riky.gua@tesijet.com

官网:www.tesijet.com


• 深圳市蓉声科技有限公司(深圳市)

福中路海连大厦连天阁 1103 室福田区

邮编:518033

电话:13828880571

邮箱:jiang.qian@radiation-test.com

官网:www.radiation-test.com


• 苏州伊欧陆系统集成有限公司(苏州)

星湖街218号生物纳米园A7楼305室苏州工业园区

邮编:215000

电话:4008808776

邮箱:info@eoulu.com

官网:www.eoulu.com


• EM Labs Inc.(Kobe)

1-4-13 Mizukasadori, Nagata

邮编:653-0842

电话:+81-50-5370-0262

邮箱:info@emlabs.jp

官网:www.emlabs.jp


• MPI Corporation(Chupei)

No. 155 Chungho Street

邮编:302

电话:+886-3-555-1771

传真:+886-3-551-8381

邮箱:info@mpi-corporation.com

官网:www.mpi-corporation.com/ast


• NOFFZ(Tönisvorst)

Vorster Strasse 238

邮编:47918

电话:+49 2151-99878-0

邮箱:info@noffz.com

官网:www.noffz.com


• Power Technology Solutions(Santa Clara)

3048 Scott Blvd

邮编:95054

电话:650-308-8091 ext:

传真:408-727-0827

邮箱:inquiries@pwrts.com

官网:www.pwrts.com


• Resillion(Hasselt)

Kempische Steenweg 303

邮编:3500

电话:+32 498 92 01 71

邮箱:global-ci-sales@resillion.com

官网:www.resillion.com


• Suzhou Link Ways Tech Co., Ltd.(Suzhou)

16F, Block B, Jin Shi Wang Hu Building, No. 18, Jia Rui alley, SIP

邮编:215021

电话:+86 512 6602 8998


• 上海凌测电子科技有限公司(上海)

峨山路91弄120号陆家嘴软件园8号楼401A室浦东新区

邮编:200127

电话:021-61090608

邮箱:yue.lin@merlintest.com.cn

官网:www.merlintest.com.cn


• 上海北汇信息科技有限公司(上海市)

秀路100号虹桥总部1号4号楼3C闵行区紫

邮编:201103

电话:021-34716271

邮箱:info@polelink.com

官网:polelink.com


• 上海怿星电子科技有限公司(上海市)

钦州北路1199号智汇园87号楼5F室徐汇区

邮编:200233

电话:021-64955659

邮箱:biz@e-planet.cn

官网:www.e-planet.cn


• 东昇电磁兼容技术(深圳)有限公司(深圳市)

福田中心区26-3路中国凤凰大厦2栋25G

邮编:518026

电话:0755-82792411

邮箱:sales@jstoyo.cn

官网:www.jstoyo.cn


• 南京派格测控科技有限公司(南京市)

建邺区建邺人才服务大厦16楼

邮编:210019

电话:4008920858

邮箱:sales@pgtec.cn

官网:pgtec.cn


• 南京纳特通信电子有限公司(南京市)

江宁开发区临淮街20号

邮编:210012

电话:025-84471796

邮箱:sales@rflight.cn

官网:www.rflight.cn


• 深圳市研辰科技有限公司(深圳市)

益田路3008号皇都广场C座2815室福田区

邮编:518048

电话:0755-82828703

邮箱:roger_huang@ascentest.com

官网:www.ascentest.com


原厂翻新与二手仪器


• 是德科技原厂二手仪器商城(Keysight Certified Pre-Owned):www.keysight.com/used/cn/zh/


• 原厂翻新仪器经与新品相同的最终测试与校准,原厂保修最长 5 年;享 40%–90% 折扣,另有线上 5% / 教育 15% 优惠


 

0条提问

X

提问

X

回答

暂无视频

 

0条口碑
X

发表口碑

口碑标题
口碑
上传图片

ONETEST仪器资源库

联系电话:+86-755-23033660

电子邮箱:info@onetest.cn

Onetest仪器资源库

公众号

Onetest仪器资源库

视频号

Onetest仪器资源库

bilibili

Onetest仪器资源库

小助手

© 2026 Onetest仪器资源库 All Rights Reserved   粤ICP备17028186号-2      粤公网安备44030902003758

AI问答