SMU通道数量:24
电压范围:-24 V 至 24 V
最大直流吸收功率:0.6 瓦
最大直流供电功率:1.2 瓦
PXIe,24通道,±24 V,精密PXI源测量单元
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
SMU通道数量:24
电压范围:-24 V 至 24 V
最大直流吸收功率:0.6 瓦
最大直流供电功率:1.2 瓦
PXIe,24通道,±24 V,精密PXI源测量单元
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| 376735J-01 | October 2026 |
| 376735H-01 | June 2026 |
| 376735G-01 | April 2025 |
| 376735F-01 | March 2025 |
| 376735E-01 | August 2024 |
| 376735D-01 | June 2023 |
| 376735C-01 | November 2021 |
| 376735B-01 | December 2018 |
| 376735A-01 | January 2018 |
| PXIe-4163 (10 pA) | NI Measurement & Automation Explorer (MAX) |
| Device Front Panel | PXIe-4163 24-CH 10pA SMU |
| PXIe-4163 (100 pA) | NI Measurement & Automation Explorer (MAX) |
| Device Front Panel | PXIe-4163 24-CH Precision SMU |
| CH <0..23> Sense LO | Voltage remote sense input terminals. Used to compensate for I*R voltage drops in cable leads, connectors, and switches. |
| CH <0..23> Sense HI | Voltage remote sense input terminals. Used to compensate for I*R voltage drops in cable leads, connectors, and switches. |
| CH <0..23> Output HI | HI force terminal connected to channel power stage (generates and/or dissipates power). Positive polarity is defined as voltage measured on HI > LO. |
| CH <0..23> Output LO | LO force terminal connected to channel power stage (generates and/or dissipates power). Positive polarity is defined as voltage measured on HI > LO. |
| Calibration HI | For external calibration use only, otherwise leave unconnected. |
| 0 through 23 | ±24 V |
| ≥58 W | 1.2 W |
| <58 W | 0.7 W |
| 1 μA | 10 pA |
| 10 μA | 100 pA |
| 100 μA | 1 nA |
| 1 mA | 10 nA |
| 10 mA | 100 nA |
| 30 mA or 50 mA[10] | 500 nA |
| 10 μA | 100 pA |
| 100 μA | 1 nA |
| 1 mA | 10 nA |
| 10 mA | 100 nA |
| 30 mA or 50 mA[15] | 500 nA |
| 1 μA [16] | 0 to ±5 MΩ |
| 10 μA | 0 to ±500 kΩ |
| 100 μA | 0 to ±50 kΩ |
| 1 mA | 0 to ±5 kΩ |
| 10 mA | 0 to ±500 Ω |
| 30 mA [17] | 0 to ±150 Ω |
| 50 mA [18] | 0 to ±100 Ω |
| Settling time[23] | <500 μs, typical[24] |
| Transient response[25] | <100 μs, typical[26] |
| Voltage | No additional error due to lead drop |
| Current | No additional error due to lead drop |
| Maximum lead drop | 1 V drop/lead |
| Voltage[27] | 50 μV/mA, typical |
| Current | (30 pA + 20 ppm of range)/volt, typical |
| Overcurrent or overvoltage | Automatic shutdown, output disconnect relay opens |
| Overtemperature | Automatic shutdown, output disconnect relay opens |
| From Sense HI when VOutput HI > 0 V | -0.5 V to (VOutput HI + 0.5 V) |
| From Sense HI when VOutput HI ≤ 0 V | (VOutput HI - 0.5 V) to 0.5 V |
| From all other pins | ±25 V |
| Available sample rates[29] | (600 kS/s)/N, nominal where N = 6, 7, 8, … 220 S is samples |
| Sample rate accuracy | ±50 ppm |
| Maximum measure rate to host[30] | 100,000 S/s per channel, continuous, nominal |
| Single channel | 100,000 updates/s, nominal |
| All channels simultaneously | 40,000 updates/s per channel, nominal |
| Source event delay | 8.5 µs, nominal |
| Source event jitter | 1.7 μs, nominal |
| Measure event jitter | 1.7 μs, nominal |
| Types | Start Source Sequence Advance Measure |
| Polarity | Active high (not configurable) |
| Minimum pulse width | 100 ns |
| Polarity | Active high (not configurable) |
| Minimum pulse width | >200 ns |
| Types | Source Complete Sequence Iteration Complete Sequence Engine Done Measure Complete |
| Polarity | Active high (not configurable) |
| Pulse width | 230 ns |
| +3.3 V | Idle |
| +3.3 V | Full Output Load |
| +12 V | Idle |
| +12 V | Full Output Load |
| +3.3 V | Idle |
| +3.3 V | Full Output Load |
| +12 V | Idle |
| +12 V | Full Output Load |
| Dimensions | 3U, one-slot, PXI Express/CompactPCI Express module 2.1 cm × 13.1 cm × 21.4 cm (0.8 in. × 5.1 in. × 8.4 in.), nominal For more information, visit ni.com/dimensions and search by module number. |
| Weight | 394 g (13.9 oz), nominal |
| Front panel connector | Custom 62-position D-SUB, female |
| Operating temperature for chassis with slot cooling capacity ≥58 W[31] | 0 °C to 55 °C |
| Operating temperature for all other compatible chassis | 0 °C to 40 °C |
| Storage | -40 °C to 71 °C |
| Operating | 10% to 90%, noncondensing |
| Storage | 5% to 95%, noncondensing |
| Pollution Degree | 2 |
| Maximum altitude | 2,000 m (800 mbar) (at 25 °C ambient temperature) |
| Operating vibration | 5 Hz to 500 Hz, 0.3 g RMS |
| Non-operating vibration | 5 Hz to 500 Hz, 2.4 g RMS |
| Operating shock | 30 g, half-sine, 11 ms pulse |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxie-4163-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答