最大带宽:105 MHz
输出通道数量:1
模拟输出电压范围:-1 V 至 1 V
模拟输出板载内存大小:8 MB
100 MHz带宽,单通道,12位PXI波形发生器
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
最大带宽:105 MHz
输出通道数量:1
模拟输出电压范围:-1 V 至 1 V
模拟输出板载内存大小:8 MB
100 MHz带宽,单通道,12位PXI波形发生器
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| Connector type | SMB male |
| Frequency range | 9 kHz to 105 MHz |
| Frequency resolution | 1.07 μHz |
| Phase range | 0° to 359.978° |
| Phase resolution | 16,384 steps including endpoints (~ 0.022°) |
| Output impedance[1] | 50 Ω, nominal |
| Output protection | 10 V RMS |
| Sample rate | 300 MS/s |
| Amplitude range Open load 4 V pk-pk to 2 V pk-pk 50 Ω load 2 V pk-pk to 1 V pk-pk | Open load |
| Open load | 4 V pk-pk to 2 V pk-pk |
| 50 Ω load | 2 V pk-pk to 1 V pk-pk |
| Amplitude resolution[2] | 2,048 steps including endpoints |
| Amplitude accuracy (50 kHz) | ±1% |
| Amplitude passband flatness (relative to the amplitude at 50 kHz)[3] | ±0.2 dB |
| Vertical resolution (open load) 4 V pk-pk 12 bits 2 V pk-pk 11 bits | 4 V pk-pk |
| 4 V pk-pk | 12 bits |
| 2 V pk-pk | 11 bits |
| Bandwidth (0.2 dB)[4] | 105 MHz |
| Filter | Analog, 7-pole elliptical |
| 1 MHz | +51 |
| 10 MHz | +48 |
| 20 MHz | +45 |
| 50 MHz | +42 |
| 100 MHz | +42 |
| 1 MHz | -55 |
| 10 MHz | -54 |
| 20 MHz | -49 |
| 50 MHz | -45 |
| 100 MHz | -53 |
| 1 MHz | -50 |
| 10 MHz | -47 |
| 20 MHz | -40 |
| 50 MHz | -35 |
| 100 MHz | -30 |
| Average noise density[7] | 0.126 μV RMS/√Hz -125 dBm/Hz |
| Connector type | SMB male |
| Frequency range | DC to 105 MHz |
| Frequency resolution | 1.07 μHz |
| Phase range | 0° to 359.978° |
| Phase resolution | 16,384 steps including endpoints (~ 0.022°) |
| Output impedance[8] | 50 Ω, nominal |
| Output protection | +8 V to -4 V |
| 5.0 V | 120 |
| 3.3 V | 72 |
| 1.8 V | 48 |
| 5.0 V | -0.10 |
| 3.3 V | 2.60 |
| 1.8 V | 1.40 |
| 5.0 V | -0.10 |
| 3.3 V | 1.30 |
| 1.8 V | 0.70 |
| Rise/fall time (50 Ω load) | 4 ns |
| Duty cycle range | 25% to 75% |
| Duty cycle accuracy[10] 30% to 70% ±2%, typical 25% and 75% ±4%, typical | 30% to 70% |
| 30% to 70% | ±2%, typical |
| 25% and 75% | ±4%, typical |
| Connector type | SMB male |
| Direction | Bidirectional |
| Frequency range | DC to 20 MHz |
| Input signal Destinations PXI_Trig <0..7> (backplane connector) REF OUT (front panel connector) Start Trigger Input resistance 1 kΩ ± 1% Input protection +8 V to -4 V VIH 2.0 V VIL 0.8 V | Destinations |
| Destinations | PXI_Trig <0..7> (backplane connector) REF OUT (front panel connector) Start Trigger |
| Input resistance | 1 kΩ ± 1% |
| Input protection | +8 V to -4 V |
| VIH | 2.0 V |
| VIL | 0.8 V |
| Output signal Sources PXI_CLK10 (backplane connector) Sample Timebase Clock (60 MHz) divided by N (3 ≤ N ≤ 255) REF IN (front panel connector) PXI_Trig <0..7> (backplane connector) PXI Star Trigger (backplane connector) CH 0 CLOCK out (front panel connector) Software Trigger Start Trigger Output impedance[11] 50 Ω ± 5% Output protection +6 V to -1 V Minimum VOH Open load 4.0 V 50 Ω load 2.0 V Maximum VOL Open load 0.4 V 50 Ω load 0.2 V Rise/fall time 4 ns | Sources |
| Sources | PXI_CLK10 (backplane connector) Sample Timebase Clock (60 MHz) divided by N (3 ≤ N ≤ 255) REF IN (front panel connector) PXI_Trig <0..7> (backplane connector) PXI Star Trigger (backplane connector) CH 0 CLOCK out (front panel connector) Software Trigger Start Trigger |
| Output impedance[11] | 50 Ω ± 5% |
| Output protection | +6 V to -1 V |
| Minimum VOH Open load 4.0 V 50 Ω load 2.0 V | Open load |
| Open load | 4.0 V |
| 50 Ω load | 2.0 V |
| Maximum VOL Open load 0.4 V 50 Ω load 0.2 V | Open load |
| Open load | 0.4 V |
| 50 Ω load | 0.2 V |
| Rise/fall time | 4 ns |
| Connector type | SMB male |
| Frequency range Phase-Locked Loop (PLL) Reference destination 1 MHz to 20 MHz All other destinations (besides PLL Reference) 200 kHz to 30 MHz | Phase-Locked Loop (PLL) Reference destination |
| Phase-Locked Loop (PLL) Reference destination | 1 MHz to 20 MHz |
| All other destinations (besides PLL Reference) | 200 kHz to 30 MHz |
| Destinations | PLL Reference REF OUT (front panel connector) PFI 0 (front panel connector) PXI_TRIG <0..7> (backplane connector) |
| Input impedance | 1 kΩ ± 1% |
| Input protection (sine or square wave) | 12 V pk-pk ± 5 V DC |
| Amplitude (sine or square wave) | 300 mV pk-pk to 5 V pk-pk |
| Input coupling | AC |
| Connector type | SMB male |
| Frequency range | DC to 20 MHz |
| Output impedance[12] | 50 Ω ± 5% |
| Output protection | +6 V to -1 V |
| VOH Open load 4.0 V 50 Ω load 2.0 V | Open load |
| Open load | 4.0 V |
| 50 Ω load | 2.0 V |
| VOL Open load 0.4 V 50 Ω load 0.2 V | Open load |
| Open load | 0.4 V |
| 50 Ω load | 0.2 V |
| Rise/fall time (50 Ω load) | 4 ns |
| Sources | PFI 0 (front panel connector) PXI_Trig<0..7> (backplane connector) PXI Star Trigger (backplane connector) Software Immediate (Does not wait for a trigger.)[13] |
| Mode | Continuous |
| Trigger detection | Edge (rising) |
| Minimum pulse width | 10 ns |
| Trigger to SINE output delay | 250 μs, typical |
| Frequency | 300 MS/s |
| Average phase noise density[14] | -112 dBc/Hz |
| Sources | PXI_CLK10 (backplane connector) REF IN (front panel connector) PXI_TRIG <0..7> (backplane connector) None (The PLL is not used.)[15] |
| Frequency accuracy | When using the PLL, the frequency accuracy of the PXI-5404 is solely dependent on the frequency accuracy of the PLL Reference source. |
| Lock time | 200 ms, typical |
| Frequencies | 3 MHz to 20 MHz in 1 MHz increments |
| Frequency locking range | ±50 ppm |
| Duty cycle range | 30% to 70% |
| Clock source | The clock circuitry of the PXI-5404 can either be locked to a reference signal using the PLL or use an onboard frequency reference, specifically the Internal Clock. |
| Frequency accuracy[16] | ±25 ppm, maximum ±11 ppm, typical |
| Frequency temperature coefficient | ±0.4 ppm/°C |
| Calibration interval | Specifications valid within one year of external calibration |
| Warm-up time | 15 minutes |
| +3.3 V rail | 1 A |
| +5 V rail | 550 mA |
| +12 V rail | 180 mA |
| -12 V rail | 50 mA |
| Operating temperature | 0 °C to 50 °C |
| Storage temperature | -20 ºC to 70 °C |
| Dimensions | 3U, one-slot, PXI/cPCI module 21.6 cm × 2.0 cm × 13.0 cm (8.5 in. × 0.8 in. × 5.1 in.) |
| Weight | 175 g (6.1 oz) |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxi-5404-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答