最大带宽:40 MHz
模拟输出电压范围:-12 V 至 12 V
模拟输出分辨率:16 bits
最大模拟更新速率:200 MS/s
PXIe,40 MHz带宽,1或2通道,16位PXI波形发生器
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
最大带宽:40 MHz
模拟输出电压范围:-12 V 至 12 V
模拟输出分辨率:16 bits
最大模拟更新速率:200 MS/s
PXIe,40 MHz带宽,1或2通道,16位PXI波形发生器
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| CH 0 | Output |
| CH 1 | Output |
| PFI 0 | Input/Output |
| PFI 1 | Input/Output |
| 1 | GND |
| 2 | NC |
| 3 | GND |
| 4 | GND |
| 5 | NC |
| 6 | GND |
| 7 | GND |
| 8 | AUX 0/PFI 0 |
| 9 | AUX 0/PFI 1 |
| 10 | GND |
| 11 | AUX 0/PFI 2 |
| 12 | AUX 0/PFI 3 |
| 13 | GND |
| 14 | AUX 0/PFI 4 |
| 15 | AUX 0/PFI 5 |
| 16 | AUX 0/PFI 6 |
| 17 | AUX 0/PFI 7 |
| 18 | +3.3 V |
| 19 | GND |
| PFI <0..7> | Bidirectional PFI line |
| NC | No connection |
| +3.3 V | +3.3 V power (200 mA maximum) |
| GND | Ground reference for signals |
| Number of channels[1] | 1 or 2 |
| Output type | Referenced single-ended |
| Connector type | SMA |
| DAC resolution | 16 bits |
| Amplitude range[2], in 0.16 dB steps 50 Ω load 0.00775 Vpk-pk to 12 Vpk-pk Open load 0.0155 Vpk-pk to 24 Vpk-pk | 50 Ω load |
| 50 Ω load | 0.00775 Vpk-pk to 12 Vpk-pk |
| Open load | 0.0155 Vpk-pk to 24 Vpk-pk |
| Offset range | ±50% of Amplitude Range (Vpk-pk)[3] |
| Offset resolution | 16-bit full-scale range |
| DC accuracy[4] Within ±5 °C of self-calibration temperature ±0.35% of Amplitude Range ± 0.35% of Offset Requested ± 500 µV, warranted[5] 0 °C to 55 °C ±0.55% of Amplitude Range ± 0.55% of Offset Requested ± 500 µV, typical | Within ±5 °C of self-calibration temperature |
| Within ±5 °C of self-calibration temperature | ±0.35% of Amplitude Range ± 0.35% of Offset Requested ± 500 µV, warranted[5] |
| 0 °C to 55 °C | ±0.55% of Amplitude Range ± 0.55% of Offset Requested ± 500 µV, typical |
| AC amplitude accuracy[6] (within ±5 °C of self-calibration temperature) | ±1.0% ± 1 mVpk-pk, warranted |
| Output impedance | 50 Ω |
| Load impedance | Output waveform is compensated for user-specified impedances |
| Output coupling (ground referenced) | DC |
| Output enable[7] | Software-selectable |
| Maximum output overload[8] | ±12 Vpk-pk from a 50 Ω source |
| Waveform summing | Supported[9] |
| Frequency range | 0 MHz to 40 MHz |
| Frequency step size | 2.84 µHz |
| 1 MHz | ±0.4 |
| 10 MHz | ±0.4 |
| 20 MHz | ±0.4 |
| 40 MHz [11] | ±0.45 |
| 1 MHz | 62 |
| 3 MHz | 62 |
| 5 MHz | 61 |
| 10 MHz | 61 |
| 20 MHz | 61 |
| 30 MHz | 59 |
| 40 MHz | 55 |
| 1 MHz | 62 |
| 3 MHz | 62 |
| 5 MHz | 62 |
| 10 MHz | 61 |
| 20 MHz | 61 |
| 30 MHz | 61 |
| 40 MHz | 61 |
| 1 MHz | 79 |
| 3 MHz | 73 |
| 5 MHz | 72 |
| 10 MHz | 68 |
| 20 MHz | 61 |
| 30 MHz | 58 |
| 40 MHz | 55 |
| 0.06 Vpk-pk | -154 |
| 0.1 Vpk-pk | -154 |
| 0.4 Vpk-pk | -150 |
| 1 Vpk-pk | -145 |
| 2 Vpk-pk | -141 |
| 4 Vpk-pk | -132 |
| 12 Vpk-pk | -125 |
| Jitter (RMS)[14] | 214 fs |
| Frequency range | 0 MHz to 25 MHz |
| Frequency step size | 2.84 µHz |
| Minimum on/off time[15] | 17.6 ns |
| Duty cycle resolution | <0.001% |
| Rise/fall time[16] | 9 ns, measured |
| Aberration | 1.0%, measured |
| Jitter (RMS)[17] | 2 ps, measured |
| Frequency range | 0 MHz to 40 MHz |
| Frequency step size | 2.84 µHz |
| Waveform points | 8,192 |
| Step response rise time | 7 ns, measured |
| Waveform size | 2 samples to 64,000,000 samples |
| User sample rate Digital filter enabled 5.6 µS/s to 200 MS/s Digital filter disabled 3.125 MS/s to 200 MS/s | Digital filter enabled |
| Digital filter enabled | 5.6 µS/s to 200 MS/s |
| Digital filter disabled | 3.125 MS/s to 200 MS/s |
| Waveform filters Digital filter enabled Bandwidth = 0.2 * User Sample Rate Digital filter disabled No reconstruction image rejection | Digital filter enabled |
| Digital filter enabled | Bandwidth = 0.2 * User Sample Rate |
| Digital filter disabled | No reconstruction image rejection |
| Minimum quantum size | 1 sample |
| Rise time[18] Digital filter enabled 15.3 ns, measured Digital filter disabled 8.4 ns, measured | Digital filter enabled |
| Digital filter enabled | 15.3 ns, measured |
| Digital filter disabled | 8.4 ns, measured |
| Total onboard memory | 128 MB per channel |
| Reference Clock source | Internal PXIe_CLK100 (backplane connector) |
| Reference Clock frequency | 100 MHz (<±25 ppm) |
| Sample Clock rate | 800 MHz |
| Internal timebase accuracy[22] Initial calibrated accuracy 1.5 ppm, warranted Time drift[23] 1 ppm per year, warranted Accuracy Initial Calibrated Accuracy ± Time Drift, warranted | Initial calibrated accuracy |
| Initial calibrated accuracy | 1.5 ppm, warranted |
| Time drift[23] | 1 ppm per year, warranted |
| Accuracy | Initial Calibrated Accuracy ± Time Drift, warranted |
| Channel-to-channel skew, between the channels of a multichannel PXIe-5423 [24] <2.75 Vpk-pk ±110 ps >2.75 Vpk-pk ±275 ps | <2.75 Vpk-pk |
| <2.75 Vpk-pk | ±110 ps |
| >2.75 Vpk-pk | ±275 ps |
| Module-to-module skew, between PXIe-5423 modules using NI-TClk [25] NI-TClk synchronization without manual adjustment Skew, peak-to-peak 300 ps, typical Jitter, peak-to-peak 125 ps, typical NI-TClk synchronization with manual adjustment Skew, average <10 ps Jitter, peak-to-peak 5 ps | NI-TClk synchronization without manual adjustment Skew, peak-to-peak 300 ps, typical Jitter, peak-to-peak 125 ps, typical |
| NI-TClk synchronization without manual adjustment Skew, peak-to-peak 300 ps, typical Jitter, peak-to-peak 125 ps, typical | Skew, peak-to-peak |
| Skew, peak-to-peak | 300 ps, typical |
| Jitter, peak-to-peak | 125 ps, typical |
| NI-TClk synchronization with manual adjustment Skew, average <10 ps Jitter, peak-to-peak 5 ps | Skew, average |
| Skew, average | <10 ps |
| Jitter, peak-to-peak | 5 ps |
| Sample Clock delay/adjustment resolution | 3.8E(-6) × Sample Clock Period For example, at 100 MS/s, 3.8E(-6) × (1/100 MS/s) = 38 fs. |
| Number of terminals | 10 |
| Connector type PFI 0 and PFI 1 SMA AUX 0/PFI <0..7> MHDMR | PFI 0 and PFI 1 |
| PFI 0 and PFI 1 | SMA |
| AUX 0/PFI <0..7> | MHDMR |
| Logic level | 3.3 V |
| Maximum input voltage | +5 V |
| VIH | 2 V |
| VIL | 0.8 V |
| Frequency range | 0 MHz to 25 MHz |
| PFI-to-channel crosstalk | -80 dBc, measured |
| Sources/destinations | PFI <0..1> (SMA front panel connectors) AUX 0/PFI <0..7> (MHDMR front panel connector) PXI_Trig <0..7> (backplane connector) |
| Supported triggers | Start Trigger Script Trigger |
| Trigger type | Rising edge |
| Trigger modes[26] | Single Continuous Stepped Burst |
| Input impedance (DC) | >100 kΩ |
| Destinations | PFI <0..1> (SMA front panel connectors) AUX 0/PFI <0..7> (MHDMR front panel connector) PXI_Trig <0..7> (backplane connector) |
| Pulse width | 200 ns |
| Marker to output skew PFI <0..1> and AUX 0/PFI <0..7> ±2 ns PXI_Trig <0..7> ±20 ns | PFI <0..1> and AUX 0/PFI <0..7> |
| PFI <0..1> and AUX 0/PFI <0..7> | ±2 ns |
| PXI_Trig <0..7> | ±20 ns |
| Maximum number of marker outputs per waveform | 4 |
| Self-calibration | An onboard reference is used to calibrate the DC gain and offset. The self-calibration is initiated by the user through the software and takes approximately 2 minutes to complete. |
| External calibration | External calibration calibrates the TCXO, voltage reference, and DC gain and offset. Appropriate constants are stored in nonvolatile memory. |
| Calibration interval | Specifications valid within 2 years of external calibration |
| Warm-up time[27] | 15 minutes |
| Current +3.3 V rail 2.3 A +12 V rail 1.8 A | +3.3 V rail |
| +3.3 V rail | 2.3 A |
| +12 V rail | 1.8 A |
| Total power | 29 W |
| Maximum altitude | 2,000 m (800 mbar) (at 25 °C ambient temperature) |
| Pollution Degree | 2 |
| Dimensions | 21.6 cm × 2.0 cm × 13.0 cm (8.5 in. × 0.8 in. × 5.1 in.) 3 U, one slot, PXI Express module |
| Weight One channel 369 g (13.0 oz) Two channels 376 g (13.3 oz) | One channel |
| One channel | 369 g (13.0 oz) |
| Two channels | 376 g (13.3 oz) |
| Bus interface Form factor Gen 1 x4 module Slot compatibility PXI Express or hybrid | Form factor |
| Form factor | Gen 1 x4 module |
| Slot compatibility | PXI Express or hybrid |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxie-5423-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答