ONETEST 欢迎您

厂商登录 | 入驻

登录 | 注册 购物车 微信公众号
请完成安全验证

类似产品

同厂商产品

PXIe-4112 60V 1A 直流电源|NI

PXIe-4112 60V 1A 直流电源|NI (在产)

电源:外部供电

最大电流:1 A

模拟输出电压范围:0 V 至 60 V

总线连接器:PXI Express

2通道,60 V,1 A PXI可编程电源

参考价格 :

厂家:NI (收录363个产品)

产地:美国 奥斯汀

点击访问厂家官网

产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案

PXIe-4112 782956-01 2通道,60 V,1 A PXI可编程电源 | NI - onetest仪器资源库

NI
PXIe-4112 782956-01 2通道,60 V,1 A PXI可编程电源
电源 外部供电 · 最大电流 1 A · 模拟输出电压范围 0 V 至 60 V
产品简介
PXIe-4112是带隔离输出的可编程直流电源。
它无需在给定测试机架中混合使用多种仪器外形,从而简化了为航空航天、国防、汽车和组件测试等各种应用设计自动化测试系统的任务。
它还具有标准的输出断开功能,不需要使用时可直接与待测设备(DUT)断开连接,同时还具有远程感应功能,可校正系统布线导致的路径损失。
782956-01 2通道,60 V,1 A PXI可编程电源
核心参数
• 电源:外部供电
• 最大电流:1 A
• 模拟输出电压范围:0 V 至 60 V
• 总线连接器:PXI Express
• 总输出功率:120 瓦
• 电源通道数量:2
• 可支持的硬件平台:PXI
• 总线连接:PXI Express
• 最大模拟输出电压:60 V
资源下载
• PXIe-4112 782956-01 2通道,60 V,1 A PXI可编程电源 的全部技术指标已单独整理,见本产品详情页「详细指标」标签。
以上内容与指标均取自NI(NI)官网该产品详情页与官方产品资料,未标注口径的为厂家公布值。
NI · onetest 仪器资源库

 

 

主要技术指标

以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。

Output Connector

CH <0..1> +HI force terminal connected to channel power stage (generates and/or dissipates power). Positive polarity is defined as voltage measured on HI > LO.
CH <0..1> -LO force terminal connected to channel power stage (generates and/or dissipates power). Positive polarity is defined as voltage measured on HI > LO.
CH <0..1> Sense +Voltage remote sense input terminals. Used to compensate for I*R voltage drops in cable leads, connectors, and switches.
GNDTied to chassis ground through module front panel. Use for connections to cable shields or grounding the LO force terminal.

Auxiliary Power Input Connector

Terminal 0 +Positive Auxiliary Power Input
Terminal 1 -Negative Auxiliary Power Input

Device Capabilities

DC voltage Voltage range 60 VVoltage range
Voltage range60 V
Minimum programmable voltage level/limit0.1 V
DC current Current range 1 A Minimum programmable current level/limit 0.01 ACurrent range
Current range1 A
Minimum programmable current level/limit0.01 A
Output power60 W/channel

Programming and Measurement Accuracy/Resolution

Voltage programming2 mV†
Voltage measurement17 mV‡
Current programming34 μA†
Current measurement274 μA‡

Load Regulation

Voltage (per amp of output load)12 mV
Current (per volt of output change)32 μA

Voltage Output Speed

Rise time (measured from 10% to 90% of programmed voltage change from 0.1 V to 60 V with specified load) Full resistive load (60 Ω) <20 ms, typical No load <10 ms, typicalFull resistive load (60 Ω)
Full resistive load (60 Ω)<20 ms, typical
No load<10 ms, typical
Fall time (measured from 10% to 90% of programmed voltage change from 60 V to 0.1 V with specified load) Full resistive load (60 Ω) <20 ms, typical No load <40 ms, typicalFull resistive load (60 Ω)
Full resistive load (60 Ω)<20 ms, typical
No load<40 ms, typical

Transient Response and Settling Time

Transient response<200 μs to recover within 200 mV of voltage level after a load current change from 50% to 100% of current range, typical
Settling time Rise time (time to settle within 0.1% of final programmed voltage level from 0.1 V to 60 V with specified load) Full resistive load (60 Ω) 40 ms, typical No load 40 ms, typical Fall time (time to settle within 0.1% of final programmed voltage level from 60 V to 0.1 V with specified load) Full resistive load (60 Ω) 100 ms, typical No load 100 ms, typicalRise time (time to settle within 0.1% of final programmed voltage level from 0.1 V to 60 V with specified load) Full resistive load (60 Ω) 40 ms, typical No load 40 ms, typical
Rise time (time to settle within 0.1% of final programmed voltage level from 0.1 V to 60 V with specified load) Full resistive load (60 Ω) 40 ms, typical No load 40 ms, typicalFull resistive load (60 Ω)
Full resistive load (60 Ω)40 ms, typical
No load40 ms, typical
Fall time (time to settle within 0.1% of final programmed voltage level from 60 V to 0.1 V with specified load) Full resistive load (60 Ω) 100 ms, typical No load 100 ms, typicalFull resistive load (60 Ω)
Full resistive load (60 Ω)100 ms, typical
No load100 ms, typical

Ripple and Noise

Voltage[3] Peak-to-peak <24 mV, typical RMS <4 mV, typicalPeak-to-peak
Peak-to-peak<24 mV, typical
RMS<4 mV, typical
Current, RMS[4]<2 mA, typical

Auxiliary Power Input Line Regulation

Line regulation (per volt of change in the auxiliary power input) Voltage 1 mV Current 0.2 mAVoltage
Voltage1 mV
Current0.2 mA

Remote Sense

Maximum output lead dropUp to 1 V drop per lead
Maximum sense lead resistanceUp to 1 Ω per lead

Protection

Output channel protection Overcurrent or reverse voltage Reverse clamp diode, protected by thermal overload circuit Overtemperature Automatic shutdownOvercurrent or reverse voltage
Overcurrent or reverse voltageReverse clamp diode, protected by thermal overload circuit
OvertemperatureAutomatic shutdown
Auxiliary power input protection Overvoltage, typical >52.8 VDC shut-off Overcurrent or reverse voltage FusedOvervoltage, typical
Overvoltage, typical>52.8 VDC shut-off
Overcurrent or reverse voltageFused

Absolute Maximum Limit

Voltage from auxiliary power + to earth ground60 VDC
Voltage from auxiliary power - to earth ground1 VDC

Isolation

Isolation voltage, channels 0- and 1-to-earth ground[5] Continuous 150 VDC, CAT I Withstand 800 VpkContinuous
Continuous150 VDC, CAT I
Withstand800 Vpk

Power Requirement

PXI power requirement0.5 A from 3.3 V rail, 0.25 A from 12 V rail
Auxiliary power source input requirements45.6 VDC to 50.4 VDC,3.5 A max

Measurement Timing Characteristics

Measurement rate Default 60/s (Line frequency set to 60 Hz, aperture set to 1 PLC, measure record mode), nominal Maximum 5,250/s, nominalDefault
Default60/s (Line frequency set to 60 Hz, aperture set to 1 PLC, measure record mode), nominal
Maximum5,250/s, nominal

Input Triggers

TypesStart Source Sequence Advance Measure
Sources (PXI trigger lines 0 to 7)[6] Polarity Active high (not configurable) Minimum pulse width 100 nsPolarity
PolarityActive high (not configurable)
Minimum pulse width100 ns
Destinations[7] (PXI trigger lines 0 to 7)[6] Polarity Active high (not configurable) Minimum pulse width 200 nsPolarity
PolarityActive high (not configurable)
Minimum pulse width200 ns

Output Triggers (Events)

TypesSource Complete Sequence Iteration Complete Sequence Engine Done Measure Complete
Destinations (PXI trigger lines 0 to 7)[6] Polarity Active high (not configurable) Pulse width 230 nsPolarity
PolarityActive high (not configurable)
Pulse width230 ns

Physical Characteristics

Dimensions3U, one-slot, PXI Express/cPCI Express module; 2.0 cm × 13.0 cm × 21.6 cm (0.8 in. × 5.1 in. × 8.5 in.), nominal
Weight443 g, nominal
User-replaceable fuse, auxiliary power input (PCB-mount)F 6.3 A H 250 V (5 × 20 mm ceramic fuse)
Front panel connectors Output channels Phoenix Contact, 5.08 mm (10 position) Auxiliary power input Weidmuller, 3.5 mm (2 × 2 position)Output channels
Output channelsPhoenix Contact, 5.08 mm (10 position)
Auxiliary power inputWeidmuller, 3.5 mm (2 × 2 position)

官方规格书:https://www.ni.com/docs/en-US/bundle/pxie-4112-specs/page/specs.html

全部

 

NI官方渠道


官方渠道(官网 / 热线 / 邮箱)


官方渠道(中国大陆)


• 官网 www.ni.com/zh-cn


• 在线选购 www.ni.com/zh-cn/shop.html


• 经销商查询

官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html


• 联系方式

NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)


全国办事处


公司总部


• NI(National Instruments)


• 地址

11500 N Mopac Expwy, Austin, TX 78759-3504, United States


• 母公司

Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)


 

0条提问

X

提问

X

回答

暂无视频

 

0条口碑
X

发表口碑

口碑标题
口碑
上传图片

ONETEST仪器资源库

联系电话:+86-755-23033660

电子邮箱:info@onetest.cn

Onetest仪器资源库

公众号

Onetest仪器资源库

视频号

Onetest仪器资源库

bilibili

Onetest仪器资源库

小助手

© 2026 Onetest仪器资源库 All Rights Reserved   粤ICP备17028186号-2      粤公网安备44030902003758

AI问答