可支持的硬件平台:PXI
总线连接:PXI Express
分辨率位数:7.5
基本直流电压精度:12 百万分率
PXIe,7½位,±1,000V,板载1.8 MS/s隔离数字化仪,PXI数字万用表
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
可支持的硬件平台:PXI
总线连接:PXI Express
分辨率位数:7.5
基本直流电压精度:12 百万分率
PXIe,7½位,±1,000V,板载1.8 MS/s隔离数字化仪,PXI数字万用表
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| Input HI | High-input impedance terminal with a positive polarity defined as Input HI > Input LO. Use this terminal in conjunction with Input LO to measure voltage, 2-wire resistance, and sourcing a test current in 4-wire resistance mode. |
| Input LO | Low-input impedance terminal that must be connected for all measurement types. Use this terminal in conjunction with Input HI to measure voltage, 2-wire resistance, and sourcing a test current in 4-wire resistance mode. Use this terminal in conjunction with Sense HI to measure current. |
| Sense LO | High-input impedance terminal when measuring 4-wire resistance. In this mode, connect the terminal to Input LO as close to the DUT as possible to avoid measuring parasitic resistance in the cabling and fixturing. |
| 100 mV | 10 MΩ ± 2%, >10 GΩ |
| 1 V | 4.5 + 0.8 |
| 10 V | 2 + 0.5 |
| 100 V | 10 MΩ ± 2% |
| 1000 V[4] | 4 + 0.5 |
| ADC linearity | 0.5 ppm of reading + 0.5 ppm of range |
| Effective common-mode rejection ratio (CMRR) (1 kΩ resistance in LO lead) | >140 dB (DC), 100 ms aperture; >170 dB (>46 Hz) with high-order DC noise rejection, 100 ms aperture, typical |
| Overrange | 105% of range except 1000 V |
| DC voltage input bias current | <30 pA at 23 °C, typical |
| 100 Ω | 1 mA |
| 1 kΩ | 1 mA |
| 10 kΩ | 100 µA |
| 100 kΩ[11] | 10 µA |
| 1 MΩ | 10 µA |
| 10 MΩ | 1 µA |
| 100 MΩ[12] | 1 µA || 10 MΩ |
| 5 GΩ[13] (typical) | 1 µA || 10 MΩ |
| 1 µA[16] | <55 mV |
| 10 µA[17] | <550 mV |
| 100 µA | <60 mV |
| 1 mA | <60 mV |
| 10 mA | <60 mV |
| 100 mA | <100 mV |
| 1 A[18] | <250 mV |
| 3 A[19] | <700 mV |
| 50 mV[21] | ±105 mV |
| 500 mV | ±1.05 V |
| 5 V | ±10.5 V |
| 50 V | ±105 V |
| 700 V | ±1000 V |
| 50 mV | 0.001 + 0.0002 |
| 50 V | 0.001 + 0.0002 |
| Input impedance | 10 MΩ ± 2% in parallel with 90 pF, typical |
| Input coupling | AC or DC coupled |
| Overrange | 105% of range except 700 V |
| Maximum Volt-Hertz product | Verified to 2.2 x 107 V-Hz |
| Maximum DC voltage component | 400 V |
| Common mode rejection ratio (CMRR), 1 kΩ resistance in LO lead | >70 dB (DC to 60 Hz), typical |
| 100 µA[24] | ±200 µA |
| 1 mA | ±2 mA |
| 10 mA | ±20 mA |
| 100 mA | ±200 mA |
| 1 A | ±2 A |
| 3 A | ±4.2 A[25] |
| Range | 10 V |
| Test current[26] | 1 µA, 10 µA, 100 µA, 1 mA[27] |
| Accuracy | Add 20 ppm of reading to 10 VDC voltage specifications. |
| Frequency measurement range | 15 Hz to 500 kHz |
| Period measurement range | 2 µs to 66.67 ms |
| 50 mV | 100 mV |
| 500 mV | 1 V |
| 5 V | 10 V |
| 50 V | 100 V |
| 700 V | 1000 V |
| RTD[30] | -200 °C to 600 °C |
| Thermistor[31] | -80 °C to 150 °C |
| J Thermocouple | -210 °C to 1200 °C |
| K Thermocouple | -200 °C to 1200 °C |
| N Thermocouple | -200 °C to 1300 °C |
| T Thermocouple | -200 °C to 400 °C |
| E Thermocouple | -200 °C to 1000 °C |
| R Thermocouple | -50 °C to 1760 °C |
| S Thermocouple | -50 °C to 1760 °C |
| B Thermocouple | 400 °C to 1820 °C |
| Available functions | Voltage and current |
| Voltage ranges | ±100 mV to ±1000 V (DC or AC coupled) |
| Current ranges | 100 µA to 3 A |
| Sample rate range | 10 S/s to 1.8 MS/s |
| Available sample rates | r = (1.8 MS/s) / y, where y = 1, 2, 3,...1.8 x 105 |
| Timebase accuracy | Equal to the PXIe_CLK100 accuracy of the chassis |
| Digitizer record length | 2 samples minimum, unlimited maximum |
| 100 mV | 10 MΩ ± 2%, >10 GΩ |
| 1 V | 125 + 75 |
| 10 V | 125 + 75 |
| 100 V | 10 MΩ ± 2% |
| 1000 V | 125 + 75 |
| 100 µA | <60 mV |
| 1 mA | <60 mV |
| 10 mA | <60 mV |
| 100 mA | <100 mV |
| 1 A | <250 mV |
| 3 A | <700 mV |
| External calibration interval | 2 years |
| Warm-up | 60 minutes to rated accuracy |
| Measurement Category | I (up to 1000 VDC, 700 VACrms, 1000 Vpk) II (up to 250 VACrms, 220 VDC) |
| Input protection (between terminals or terminal to ground) | 1000 VDC or Vpk |
| Current mode fuse | T 3.5 A 1000 V, time-lag Minimum interrupt rating: 10 kA Siba 5019906.3,5 |
| Maximum common-mode voltage | 500 VDC or VACrms |
| HI | 1000 VDC or Vpk |
| LO | 500 VDC or VACrms |
| HI SENSE | 500 VDC or VACrms |
| LO SENSE | 500 VDC or VACrms |
| Voltage, current, and resistance | 15 µs |
| Voltage and current digitizer | 1.8 MS/s |
| Power consumption | <9 W from PXI Express backplane |
| +12 V load | 0.55 A max |
| +3.3 V load | 0.55 A max |
| Dimensions | 3U, one-slot, PXI/cPCI module 2.0 cm x 13.0 cm x 21.6 cm (0.8 in. x 5.1 in. x 8.5 in.), nominal |
| Weight | 340 g (12 oz), nominal |
| Maximum altitude | 2,000 m (800 mbar) (at 25 °C ambient temperature) |
| Pollution Degree | 2 |
| Ambient temperature range | 0 °C to 55 °C |
| Relative humidity range | 10% to 90%, noncondensing |
| Ambient temperature range | -40 °C to 71 °C |
| Relative humidity range | 5% to 95%, noncondensing |
| Operating shock | 30 g peak, half-sine, 11 ms pulse |
| Random vibration Operating 5 Hz to 500 Hz, 0.3 g RMS Nonoperating 5 Hz to 500 Hz, 2.4 g RMS | Operating |
| Operating | 5 Hz to 500 Hz, 0.3 g RMS |
| Nonoperating | 5 Hz to 500 Hz, 2.4 g RMS |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxie-4081-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答