总线连接:PCI
示波器最大带宽:150 MHz
最大采样率:200 MS/s
模拟输入电压范围:-10 V 至 10 V
150 MHz带宽,200 MS/s,12位PCI示波器设备
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
总线连接:PCI
示波器最大带宽:150 MHz
最大采样率:200 MS/s
模拟输入电压范围:-10 V 至 10 V
150 MHz带宽,200 MS/s,12位PCI示波器设备
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| Number of channels | Two (simultaneously sampled) |
| Connectors | BNC |
| Input impedance (software-selectable) | 50 Ω ± 2.0% 1 MΩ ± 0.75% in parallel with a nominal capacitance of 29 pF |
| Input coupling (software-selectable) | AC[1] DC GND |
| 0.2 V | ±0.1 V |
| 0.4 V | ±0.2 V |
| 1 V | ±0.5 V |
| 2 V | ±1 V |
| 4 V | ±2 V |
| 10 V | — |
| 20 V (1 MΩ only) | — |
| Maximum input overload 50 Ω 7 Vrms with |Peaks| ≤10 V 1 MΩ |Peaks| ≤42 V | 50 Ω |
| 50 Ω | 7 Vrms with |Peaks| ≤10 V |
| 1 MΩ | |Peaks| ≤42 V |
| Resolution | 12 bits |
| 0.2 V and 0.4 V | ±(0.65% of input + 1.8 mV) |
| 1 V and 2 V | ±(0.65% of input + 2.1 mV) |
| 4 V, 10 V, and 20 V[3] | ±(0.65% of input + 10.0 mV) |
| Programmable vertical offset accuracy[4] | ±0.4% of offset setting, warranted |
| 0.2 V, 0.4 V, 1 V, and 2 V | ±(0.057% of input + 0.006% of FS + 100 μV) per °C |
| 4 V, 10 V, and 20 V[3] | ±(0.057% of input + 0.006% of FS + 900 µV) per °C |
| AC amplitude accuracy[4] 50 Ω ±0.06 dB (±0.7%) at 50 kHz 1 MΩ ±0.09 dB (±1.0%) at 50 kHz | 50 Ω |
| 50 Ω | ±0.06 dB (±0.7%) at 50 kHz |
| 1 MΩ | ±0.09 dB (±1.0%) at 50 kHz |
| Crosstalk[5] | ≤-85 dB at 10 MHz |
| Sparkle code rate[6] Onboard clock <300 ppt [7] External clock 200 MHz <300 ppt [7] 150 MHz <3 ppt [7] 100 MHz 0 | Onboard clock |
| Onboard clock | <300 ppt [7] |
| External clock 200 MHz <300 ppt [7] 150 MHz <3 ppt [7] 100 MHz 0 | 200 MHz |
| 200 MHz | <300 ppt [7] |
| 150 MHz | <3 ppt [7] |
| 100 MHz | 0 |
| 0.2 V | 85 MHz |
| All other input ranges | 150 MHz |
| Rise/fall time[8] 0.2 Vpk-pk input range 3.3 ns All other input ranges 2.4 ns | 0.2 Vpk-pk input range |
| 0.2 Vpk-pk input range | 3.3 ns |
| All other input ranges | 2.4 ns |
| Bandwidth limit filters[11] Noise filter 20 MHz 2-pole Bessel filter Anti-alias filter 60 MHz 4-pole elliptical filter | Noise filter |
| Noise filter | 20 MHz 2-pole Bessel filter |
| Anti-alias filter | 60 MHz 4-pole elliptical filter |
| AC coupling cutoff (-3 dB)[12] | 12 Hz |
| Filters off | 0.2 V |
| All input ranges except 0.2 V | ±0.5 dB (DC to 20 MHz) ±1.0 dB (20 MHz to 50 MHz) ±1.7 dB (50 MHz to 100 MHz) |
| Anti-alias filter on | All ranges |
| 0.2 V | 75 dBc |
| 0.4 V | 75 dBc |
| 1 V | 72 dBc |
| 2 V | 72 dBc |
| 4 V | 65 dBc |
| 10 V | 65 dBc |
| 20 V (1 MΩ only) | — |
| 0.2 V | -74 dBc |
| 0.4 V | -74 dBc |
| 1 V | -72 dBc |
| 2 V | -72 dBc |
| 4 V | -63 dBc |
| 10 V | -63 dBc |
| 20 V (1 MΩ only) | — |
| Intermodulation distortion (Vpk-pk)[15] | -75 dBc |
| 0.2 V | 57 dB |
| 0.4 V | 58 dB |
| 1 V | 58 dB |
| 2 V | 58 dB |
| 4 V | — |
| 0.2 V | 57 dB |
| 0.4 V | 58 dB |
| 1 V | 58 dB |
| 2 V | 58 dB |
| 4 V | — |
| 0.2 V | 106 μVrms (0.053% FS) |
| 0.4 V | 188 μVrms (0.047% FS) |
| 1 V | 470 μVrms (0.047% FS) |
| 2 V | 940 μVrms (0.047% FS) |
| 4 V | 1.88 mVrms (0.047% FS) |
| 10 V | 4.7 mVrms (0.047% FS) |
| 20 V (1 MΩ only) | — |
| 0.2 V | 126 μVrms (0.063% FS) |
| 0.4 V | 200 μVrms (0.05% FS) |
| 1 V | 500 μVrms (0.05% FS) |
| 2 V | 1.0 mVrms (0.05% FS) |
| 4 V | 2.04 mVrms (0.051% FS) |
| 10 V | 5.1 mVrms (0.051% FS) |
| 20 V (1 MΩ only) | — |
| 0.2 V | 128 μVrms (0.064% FS) |
| Sources Internal Onboard clock (internal VCXO)[18] External CLK IN (front panel SMB connector) | Internal |
| Internal | Onboard clock (internal VCXO)[18] |
| External | CLK IN (front panel SMB connector) |
| Sample rate range Real-time sampling (single shot) 3.052 kS/s to 200 MS/s[19] Random interleaved sampling (RIS) 400 MS/s to 4 GS/s in multiples of 200 MS/s | Real-time sampling (single shot) |
| Real-time sampling (single shot) | 3.052 kS/s to 200 MS/s[19] |
| Random interleaved sampling (RIS) | 400 MS/s to 4 GS/s in multiples of 200 MS/s |
| Phase noise density[20] | <-100 dBc/Hz at 100 Hz <-120 dBc/Hz at 1 kHz <-130 dBc/Hz at 10 kHz |
| Sample clock jitter[21] | ≤1 psrms (100 Hz to 100 kHz) ≤2 psrms (100 Hz to 1 MHz) |
| Timebase frequency | 200 MHz |
| Timebase accuracy Not phase-locked to Reference clock ±25 ppm, Warranted Phase-locked to Reference clock Equal to the Reference clock accuracy | Not phase-locked to Reference clock |
| Not phase-locked to Reference clock | ±25 ppm, Warranted |
| Phase-locked to Reference clock | Equal to the Reference clock accuracy |
| Sample clock delay range | ±1 Sample clock period |
| Sample clock delay/adjustment resolution | ≤5 ps |
| Sources | CLK IN (front panel SMB connector) |
| Frequency range[22] | 50 MHz to 210 MHz (CLK IN) |
| Duty cycle tolerance | 45% to 55% |
| Exported Reference clock destinations | CLK OUT (front panel SMB connector) PFI <0..1> (front panel 9-pinmini-circular DIN connector) RTSI <0..7> |
| CLK OUT (front panel SMB connector) | 210 MHz |
| PXI_Trig <0..6>[23] | 20 MHz |
| PFI <0..1> (front panel 9-pinmini-circular DIN connector)[23] | 25 MHz |
| Sources | RTSI 7 CLK IN (front panel SMB connector) |
| Frequency range | 5 MHz to 20 MHz in 1 MHz increments[24] |
| Duty cycle tolerance | 45% to 55% |
| Exported Reference clock destinations | CLK OUT (front panel SMB connector) PFI <0..1> (front panel 9-pinmini-circular DIN connector) RTSI <0..7> |
| Connector | SMB jack |
| Input voltage range Sine wave (Vpk-pk) 0.65 V to 2.8 V (0 dBm to 13 dBm) Square wave (Vpk-pk) 0.2 V to 2.8 V | Sine wave (Vpk-pk) |
| Sine wave (Vpk-pk) | 0.65 V to 2.8 V (0 dBm to 13 dBm) |
| Square wave (Vpk-pk) | 0.2 V to 2.8 V |
| Maximum input overload | 7 Vrms with |Peaks| ≤10 V |
| Impedance | 50 Ω |
| Coupling | AC |
| Connector | SMB jack |
| Output impedance | 50 Ω |
| Logic type | 3.3 V CMOS |
| Maximum drive current | ±48 mA |
| Trigger types | Edge Window Hysteresis Video Digital Immediate Software |
| Trigger sources | CH 0 CH 1 TRIG RTSI <0..6> Software |
| Time resolution Time-to-digital conversion circuit (TDC) on Onboard clock 50 ps External clock N/A TDC off Onboard clock 5 ns External clock External clock period | Time-to-digital conversion circuit (TDC) on Onboard clock 50 ps External clock N/A |
| Time-to-digital conversion circuit (TDC) on Onboard clock 50 ps External clock N/A | Onboard clock |
| Onboard clock | 50 ps |
| External clock | N/A |
| TDC off Onboard clock 5 ns External clock External clock period | Onboard clock |
| Onboard clock | 5 ns |
| External clock | External clock period |
| Minimum rearm time[25] TDC on 10 µs TDC off 2 µs | TDC on |
| TDC on | 10 µs |
| TDC off | 2 µs |
| Holdoff Onboard clock TDC on 10 µs to 85.899 s TDC off 2 µs to 85.899 s External clock (TDC off) 200 × External clock period to (232 - 1) × External clock period | Onboard clock TDC on 10 µs to 85.899 s TDC off 2 µs to 85.899 s |
| Onboard clock TDC on 10 µs to 85.899 s TDC off 2 µs to 85.899 s | TDC on |
| TDC on | 10 µs to 85.899 s |
| TDC off | 2 µs to 85.899 s |
| External clock (TDC off) | 200 × External clock period to (232 - 1) × External clock period |
| Trigger types | Edge Window Hysteresis |
| Sources | CH 0 (front panel BNC connector) CH 1 (front panel BNC connector) TRIG (front panel BNC connector) |
| Trigger level range CH 0, CH 1 100% of FS TRIG (External Trigger) ±5 V | CH 0, CH 1 |
| CH 0, CH 1 | 100% of FS |
| TRIG (External Trigger) | ±5 V |
| Trigger level resolution | 10 bits (1 in 1,024) |
| Edge trigger sensitivity, warranted CH 0, CH 1 3.5% FS up to 50 MHz Increases to 10% FS at 150 MHz TRIG (external trigger), Vpk-pk 0.25 V up to 100 MHz Increases to 1 V at 200 MHz | CH 0, CH 1 |
| CH 0, CH 1 | 3.5% FS up to 50 MHz Increases to 10% FS at 150 MHz |
| TRIG (external trigger), Vpk-pk | 0.25 V up to 100 MHz Increases to 1 V at 200 MHz |
| Level accuracy CH 0, CH 1 ±4.7% FS up to 10 MHz TRIG (External Trigger) ±0.35 V up to 10 MHz | CH 0, CH 1 |
| CH 0, CH 1 | ±4.7% FS up to 10 MHz |
| TRIG (External Trigger) | ±0.35 V up to 10 MHz |
| Trigger jitter | ≤80 psrms [26] |
| Trigger filters Low-frequency (LF) reject 50 kHz High-frequency (HF) reject 50 kHz | Low-frequency (LF) reject |
| Low-frequency (LF) reject | 50 kHz |
| High-frequency (HF) reject | 50 kHz |
| Trigger type | Digital |
| Sources | RTSI <0..6> PFI <0..1> (front panel SMB connector) |
| Trigger type | Video |
| Sources | CH 0 (front panel BNC connector) CH 1 (front panel BNC connector) TRIG (front panel BNC connector) |
| Video trigger types | Specific line Any line Specific field |
| Standards | Negative sync of NTSC, PAL, or SECAM signal |
| Connector | TRIG (front panel BNC connector) |
| Impedance | 1 MΩ in parallel with 22 pF |
| Coupling | AC DC |
| AC-coupling cutoff (-3 dB) | 12 Hz |
| Input voltage range | ±5 V |
| Maximum input overload | |Peaks| ≤42 V |
| Connector | 9-pin mini-circular DIN |
| Direction | Bidirectional |
| As an input (trigger) Destinations Start trigger (acquisition arm) Reference (stop) trigger Arm Reference trigger Advance trigger Input impedance 150 kΩ, nominal VIH 2.0 V VIL 0.8 V Maximum input overload -0.5 V to 5.5 V Maximum frequency 25 MHz | Destinations |
| Destinations | Start trigger (acquisition arm) Reference (stop) trigger Arm Reference trigger Advance trigger |
| Input impedance | 150 kΩ, nominal |
| VIH | 2.0 V |
| VIL | 0.8 V |
| Maximum input overload | -0.5 V to 5.5 V |
| Maximum frequency | 25 MHz |
| As an output (event) Sources Start trigger (acquisition arm) Reference (stop) trigger End of Record Done (end of acquisition) Probe Compensation[27] Output impedance 50 Ω Logic type 3.3 V CMOS Maximum drive current ±24 mA Maximum frequency 25 MHz | Sources |
| Sources | Start trigger (acquisition arm) Reference (stop) trigger End of Record Done (end of acquisition) Probe Compensation[27] |
| Output impedance | 50 Ω |
| Logic type | 3.3 V CMOS |
| Maximum drive current | ±24 mA |
| Maximum frequency | 25 MHz |
| Onboard memory sizes | 8 MB per channel (4 MS per channel) 32 MB per channel (16 MS per channel) 256 MB per channel (128 MS per channel) |
| Minimum record length | 1 sample |
| Number of pretrigger samples | Zero up to full record length[28] |
| Number of posttrigger samples | Zero up to full record length[28] |
| Maximum number of records in onboard memory 8 MB per channel 21,845 32 MB per channel 87,381 256 MB per channel 100,000[29] | 8 MB per channel |
| 8 MB per channel | 21,845 |
| 32 MB per channel | 87,381 |
| 256 MB per channel | 100,000[29] |
| Allocated onboard memory per record | (Record Length × 2 bytes/S) + 200 bytes, rounded up to next multiple of 128 bytes or 384 bytes, whichever is greater |
| Interval for external calibration | 2 years |
| Warm-up time[30] | 15 minutes |
| Module-to-module skew, between PCI-5124 modules using NI-TClk [32] NI-TClk synchronization without manual adjustment [33] Skew, Peak-to-Peak [34] 500 ps NI-TClk synchronization with manual adjustment [33] Skew after manual adjustment <10 ps | NI-TClk synchronization without manual adjustment [33] Skew, Peak-to-Peak [34] 500 ps |
| NI-TClk synchronization without manual adjustment [33] Skew, Peak-to-Peak [34] 500 ps | Skew, Peak-to-Peak [34] |
| Skew, Peak-to-Peak [34] | 500 ps |
| NI-TClk synchronization with manual adjustment [33] Skew after manual adjustment <10 ps | Skew after manual adjustment |
| Skew after manual adjustment | <10 ps |
| Sample Clock delay/adjustment resolution | ≤5 ps |
| Dimensions | 35.5 cm × 2.0 cm × 11.3 cm (14.0 in × 0.8 in × 4.4 in) |
| Weight | 455 g (16 oz) |
| Current draw +3.3 VDC 1.3 A +5 VDC 2.7 A +12 VDC 130 mA -12 VDC 0 A | +3.3 VDC |
| +3.3 VDC | 1.3 A |
官方规格书:https://www.ni.com/docs/en-US/bundle/pci-5124-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答