总线连接:PCI
示波器最大带宽:300 MHz
最大采样率:2 GS/s
模拟输入电压范围:-5 V 至 5 V
300 MHz带宽,2 GS/s,8位PCI示波器设备
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
总线连接:PCI
示波器最大带宽:300 MHz
最大采样率:2 GS/s
模拟输入电压范围:-5 V 至 5 V
300 MHz带宽,2 GS/s,8位PCI示波器设备
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| Number of channels | Two (simultaneously sampled) |
| Connectors | BNC |
| Input Impedance (software-selectable) 50 Ω 50 Ω ±1.5% 1 MΩ 1 MΩ ±0.75% in parallel with a nominal capacitance of 22 pF | 50 Ω |
| 50 Ω | 50 Ω ±1.5% |
| 1 MΩ | 1 MΩ ±0.75% in parallel with a nominal capacitance of 22 pF |
| Input coupling | Software-selectable: AC, DC, GND |
| 0.1 | ±1 |
| 2 | ±6 |
| 4 | ±5 |
| 10 | ±2 |
| Maximum input overload 50 Ω 7 Vrms with |Peaks| ≤10 V 1 MΩ |Peaks| ≤42 V | 50 Ω |
| 50 Ω | 7 Vrms with |Peaks| ≤10 V |
| 1 MΩ | |Peaks| ≤42 V |
| Resolution | 8 bits |
| DC accuracy, warranted[1][2] 0.1 V to 1 V input range ±(1.26% of Input + 1.0% of FS + 500 µV) 2 V to 10 V input range ±(1.26% of Input + 1.0% of FS + 5 mV) | 0.1 V to 1 V input range |
| 0.1 V to 1 V input range | ±(1.26% of Input + 1.0% of FS + 500 µV) |
| 2 V to 10 V input range | ±(1.26% of Input + 1.0% of FS + 5 mV) |
| Programmable vertical offset accuracy[2] | ±0.9% of offset setting, warranted |
| DC Drift, nominal[3] 0.1 V to 1 V input range ±(0.052% of Input + 100 µV) per °C 2 V to 10 V input range ±(0.052% of Input + 1.0 mV) per °C | 0.1 V to 1 V input range |
| 0.1 V to 1 V input range | ±(0.052% of Input + 100 µV) per °C |
| 2 V to 10 V input range | ±(0.052% of Input + 1.0 mV) per °C |
| Crosstalk CH 0 to/from CH 1[4] 10 MHz <-80 dB 100 MHz <-60 dB Ext Trig to CH 0 or CH 1[5] 10 MHz <-80 dB 100 MHz <-80 dB | CH 0 to/from CH 1[4] 10 MHz <-80 dB 100 MHz <-60 dB |
| CH 0 to/from CH 1[4] 10 MHz <-80 dB 100 MHz <-60 dB | 10 MHz |
| 10 MHz | <-80 dB |
| 100 MHz | <-60 dB |
| Ext Trig to CH 0 or CH 1[5] 10 MHz <-80 dB 100 MHz <-80 dB | 10 MHz |
| 10 MHz | <-80 dB |
| 100 MHz | <-80 dB |
| Bandwidth (-3 dB), warranted[6], [7] 0.1 V input range 50 Ω 165 MHz, typical 135 MHz minimum 1 MΩ 135 MHz, typical 110 MHz minimum All other input ranges 50 Ω 340 MHz, typical 300 MHz minimum 1 MΩ 300 MHz, typical 260 MHz minimum | 0.1 V input range 50 Ω 165 MHz, typical 135 MHz minimum 1 MΩ 135 MHz, typical 110 MHz minimum |
| 0.1 V input range 50 Ω 165 MHz, typical 135 MHz minimum 1 MΩ 135 MHz, typical 110 MHz minimum | 50 Ω |
| 50 Ω | 165 MHz, typical 135 MHz minimum |
| 1 MΩ | 135 MHz, typical 110 MHz minimum |
| All other input ranges 50 Ω 340 MHz, typical 300 MHz minimum 1 MΩ 300 MHz, typical 260 MHz minimum | 50 Ω |
| 50 Ω | 340 MHz, typical 300 MHz minimum |
| 1 MΩ | 300 MHz, typical 260 MHz minimum |
| Rise/fall time[8] 0.1 V input range 50 Ω 2.4 ns 1 MΩ 2.8 ns [9] All other input ranges 50 Ω 1.2 ns 1 MΩ 1.4 ns [9] | 0.1 V input range 50 Ω 2.4 ns 1 MΩ 2.8 ns [9] |
| 0.1 V input range 50 Ω 2.4 ns 1 MΩ 2.8 ns [9] | 50 Ω |
| 50 Ω | 2.4 ns |
| 1 MΩ | 2.8 ns [9] |
| All other input ranges 50 Ω 1.2 ns 1 MΩ 1.4 ns [9] | 50 Ω |
| 50 Ω | 1.2 ns |
| 1 MΩ | 1.4 ns [9] |
| Bandwidth limit filter | 20 MHz noise filter |
| AC coupling cutoff (-3 dB)[10] 50 Ω 106 kHz 1 MΩ 12 Hz | 50 Ω |
| 50 Ω | 106 kHz |
| 1 MΩ | 12 Hz |
| ENOB[11] Noise filter on 7.3 Noise filter off 7.1 | Noise filter on |
| Noise filter on | 7.3 |
| Noise filter off | 7.1 |
| Signal to Noise and Distortion (SINAD)[11] Noise filter on 45 dB Noise filter off 43 dB | Noise filter on |
| Noise filter on | 45 dB |
| Noise filter off | 43 dB |
| 0.1 | 240 µVrms (0.24% FS) |
| 0.2 | 480 µVrms (0.24% FS) |
| 0.4 | 960 µVrms (0.24% FS) |
| 1 | 2.4 mVrms (0.24% FS) |
| 2 | 4.8 mVrms (0.24% FS) |
| 4 | 9.6 mVrms (0.24% FS) |
| 10 | 24 mVrms (0.24% FS) |
| Channel-to-channel skew | <100 ps |
| Sources Internal Onboard clock (internal VCSO) [13] External PFI 0 (front panel SMB connector) | Internal |
| Internal | Onboard clock (internal VCSO) [13] |
| External | PFI 0 (front panel SMB connector) |
| Sample rate range Real-time sampling (single shot)[14] 15.26 kS/s to 1 GS/s TIS[15] mode (single shot) 2 GS/s (single channel only) Random interleaved sampling (RIS) mode[16] 2 GS/s to 20 GS/s in increments of 1 GS/s (repetitive waveforms only) | Real-time sampling (single shot)[14] |
| Real-time sampling (single shot)[14] | 15.26 kS/s to 1 GS/s |
| TIS[15] mode (single shot) | 2 GS/s (single channel only) |
| Random interleaved sampling (RIS) mode[16] | 2 GS/s to 20 GS/s in increments of 1 GS/s (repetitive waveforms only) |
| Timebase accuracy Not phase-locked to Reference clock ±30 ppm within ±3 ºC of external calibration temperature, plus an additional ±7 ppm per ºC outside of ±3 ºC of external calibration temperature, warranted Phase-locked to Reference clock Equal to the Reference clock accuracy[17] | Not phase-locked to Reference clock |
| Not phase-locked to Reference clock | ±30 ppm within ±3 ºC of external calibration temperature, plus an additional ±7 ppm per ºC outside of ±3 ºC of external calibration temperature, warranted |
| Phase-locked to Reference clock | Equal to the Reference clock accuracy[17] |
| Sample clock delay range | ±1 Sample clock period |
| Sample clock delay/adjustment resolution | ≤5 ps |
| Sources | PFI 0 (front panel SMB connector) |
| Frequency range[18] | 350 MHz to 1 GHz |
| Duty cycle tolerance | 45% to 55% |
| Sources | RTSI 7 PFI 0 (front panel SMB connector) |
| Frequency range[19] | 1 MHz to 20 MHz, in 1 MHz increments Default: 10 MHz |
| Duty cycle tolerance | 45% to 55% |
| Exported Reference clock destinations | RTSI <0..7> PFI 1 (front panel SMB connector) |
| Input voltage range | Sine wave: 0.65 Vpk-pk to 2.8 Vpk-pk (0 dBm to 13 dBm) |
| Maximum input overload | 7 V RMS with |Peaks| ≤10 V |
| Impedance | 50 Ω |
| Coupling | AC |
| Output impedance | 50 Ω |
| Logic type | 3.3 V CMOS, except when exporting 5 V |
| Maximum drive current | ±24 mA |
| Trigger types[20] | Edge Window Hysteresis Video Digital Immediate Software |
| Trigger sources | CH 0 CH 1 TRIG PFI <0..1> RTSI <0..6> Software |
| Time resolution Onboard clock, time-to-digital conversion circuit (TDC) on 5 ps Onboard clock, TDC off 1 ns External clock, TDC off External clock period | Onboard clock, time-to-digital conversion circuit (TDC) on |
| Onboard clock, time-to-digital conversion circuit (TDC) on | 5 ps |
| Onboard clock, TDC off | 1 ns |
| External clock, TDC off | External clock period |
| Minimum rearm time[21] TDC on 8 µs TDC off 1 µs | TDC on |
| TDC on | 8 µs |
| TDC off | 1 µs |
| Holdoff | From rearm time up to [(232 - 1) × Sample Clock Period] |
| Trigger delay | From 0 up to [(235 - 1) - Posttrigger Samples] × (1 / Sample Rate), in seconds |
| Trigger types | Edge Window Hysteresis |
| Sources | CH 0 (front panel BNC connector) CH 1 (front panel BNC connector) TRIG (front panel BNC connector) |
| Trigger level range[22] CH 0, CH 1 100% FS TRIG (External trigger) ±5 V | CH 0, CH 1 |
| CH 0, CH 1 | 100% FS |
| TRIG (External trigger) | ±5 V |
| Voltage resolution | 8 bits (1 in 256) |
| Trigger level accuracy[23] CH 0, CH 1 ±5% FS up to 10 MHz, warranted TRIG (External trigger) ±1 V (±10% FS) up to 10 MHz, warranted | CH 0, CH 1 |
| CH 0, CH 1 | ±5% FS up to 10 MHz, warranted |
| TRIG (External trigger) | ±1 V (±10% FS) up to 10 MHz, warranted |
| Edge trigger sensitivity[22], warranted CH 0, CH 1 10% FS TRIG (External trigger) 1.0 Vpp | CH 0, CH 1 |
| CH 0, CH 1 | 10% FS |
| TRIG (External trigger) | 1.0 Vpp |
| Trigger jitter[23] | ≤10 psrms, typical ≤20 psrms, maximum |
| Trigger filters Low frequency reject (LF) 50 kHz High frequency reject (HF) 50 KHz | Low frequency reject (LF) |
| Low frequency reject (LF) | 50 kHz |
| High frequency reject (HF) | 50 KHz |
| Trigger type | Digital |
| Sources | RTSI <0..6> PFI <0..1> (front panel SMB connector) |
| Connector | BNC |
| Impedance | 1 MΩ in parallel with a nominal capacitance of 22 pF |
| Coupling | AC, DC |
| AC coupling cutoff (-3 dB) | 12 Hz |
| Input voltage range | ±5 V |
| Maximum input overload | |Peaks| ≤42 V |
| Connector | SMB jack |
| Direction | Bidirectional |
| Destination | Start trigger (acquisition arm) Reference (stop) trigger Arm reference trigger Advance trigger |
| Input impedance | 150 kΩ, nominal |
| VIH | 2.0 V |
| VIL | 0.8 V |
| Maximum input overload | -0.5 V to 5.5 V |
| Maximum frequency | 25 MHz |
| Sources | Start trigger (acquisition arm) Reference (stop) trigger End of record Done (end of acquisition) Probe compensation[24] |
| Output impedance | 50 Ω |
| Logic type | 3.3 V CMOS |
| Maximum drive current | ±24 mA |
| Maximum frequency | 25 MHz |
| 8 MB standard (8 MS) per channel | 8 MB standard (8 MS) |
| 64 MB option (64 MS) per channel | 64 MB option (64 MS) |
| 256 MB option (256 MS) per channel | 256 MB option (256 MS) |
| — | 512 MB option (512 MS) |
| Minimum record length | 1 sample |
| Number of pretrigger samples | Zero up to full record length |
| Number of posttrigger samples | Zero up to full record length |
| Maximum number of records in onboard memory[26] 8 MB per channel 32,768 64 MB per channel 100,000 256 MB per channel 100,000 512 MB per channel 100,000 | 8 MB per channel |
| 8 MB per channel | 32,768 |
| 64 MB per channel | 100,000 |
| 256 MB per channel | 100,000 |
| 512 MB per channel | 100,000 |
| Allocated onboard memory per record | [(Record length × 1 byte/sample) + 400 bytes] rounded up to next multiple of 128 bytes |
| Interval for external calibration | 2 years |
| Warm-up time[27] | 15 minutes |
| Skew | 500 ps |
| Skew after manual adjustment | ≤5 ps |
| Sample clock delay/adjustment resolution | ≤5 ps |
| Current draw +3.3 VDC 2.5 A +5 VDC 2.4 A +12 VDC 200 mA -12 VDC 0 A | +3.3 VDC |
| +3.3 VDC | 2.5 A |
| +5 VDC | 2.4 A |
| +12 VDC | 200 mA |
| -12 VDC | 0 A |
| Total power | 22.65 W |
| Dimensions | 35.5 cm x 2.0 cm x 11.3 cm (14.0 in x 0.8 in x 4.4 in) |
| Weight | 445 g (15.7 oz) |
| Maximum altitude | 2,000 m (at 25 °C ambient temperature) |
| Pollution Degree | 2 |
| Ambient temperature range | 0 °C to 45 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) |
| Relative humidity range | 10% to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.) |
| Ambient temperature range | -40 °C to 71 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) |
| Relative humidity range | 5% to 95%, noncondensing (Tested in accordance with IEC 60068-2-56.) |
官方规格书:https://www.ni.com/docs/en-US/bundle/pci-5152-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答