总线连接:PCI
示波器最大带宽:1 GHz
最大采样率:2 GS/s
模拟输入电压范围:-2.5 V 至 2.5 V
1 GHz带宽,2 GS/s,8位PCI示波器设备
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
总线连接:PCI
示波器最大带宽:1 GHz
最大采样率:2 GS/s
模拟输入电压范围:-2.5 V 至 2.5 V
1 GHz带宽,2 GS/s,8位PCI示波器设备
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| Number of channels | Two (simultaneously sampled) |
| Connectors | BNC |
| Input impedance | 50 Ω ± 2 Ω |
| Voltage Standing Wave Ratio (VSWR) | 1.27 DC to 1 GHz |
| Input coupling | AC, DC, GND |
| Full scale (FS) input ranges (Vpk-pk) | 0.1 V 0.2 V 0.5 V 1 V 2 V 5 V |
| Maximum input overload | 7 V RMS with |Peaks| ≤10 V |
| Resolution | 8 bits |
| DC accuracy[1] 0.1 V to 1 V input range ±(1.0% of input + 1.3% of FS), typical ±(2.2% of input + 1.8% of FS), warranted 2 V to 5 V input range ±(1.4% of input + 1.3% of FS), typical ±(2.9% of input + 1.8% of FS), warranted | 0.1 V to 1 V input range |
| 0.1 V to 1 V input range | ±(1.0% of input + 1.3% of FS), typical ±(2.2% of input + 1.8% of FS), warranted |
| 2 V to 5 V input range | ±(1.4% of input + 1.3% of FS), typical ±(2.9% of input + 1.8% of FS), warranted |
| DC drift[2] | ±(0.14% of input + 0.05% of FS) per °C, nominal |
| Crosstalk CH 0 to/from CH 1[3] <-80 dB at 10 MHz <-60 dB at 100 MHz External trigger to CH 0 or CH 1[4] <-80 dB at 10 MHz <-70 dB at 100 MHz | CH 0 to/from CH 1[3] |
| CH 0 to/from CH 1[3] | <-80 dB at 10 MHz <-60 dB at 100 MHz |
| External trigger to CH 0 or CH 1[4] | <-80 dB at 10 MHz <-70 dB at 100 MHz |
| Bandwidth (-3 dB)[5],[6] | 1 GHz minimum[7], warranted |
| Rise/fall time[6] | 428 ps |
| Bandwidth limit filter | 20 MHz noise filter |
| AC coupling cutoff (-3 dB)[8] | 114 kHz |
| ENOB[9] Noise filter on 7.3 Noise filter off 6.7 | Noise filter on |
| Noise filter on | 7.3 |
| Noise filter off | 6.7 |
| Signal to noise distortion (SINAD)[9] Noise filter on 45 dB Noise filter off 41 dB | Noise filter on |
| Noise filter on | 45 dB |
| Noise filter off | 41 dB |
| 0.1 | 0.37% FS |
| 0.2 to 5 | 0.32% FS |
| Channel-to-channel skew | <140 ps |
| Sources Internal Onboard clock (internal VCSO)[11] External PFI 0 (front panel SMB connector) | Internal |
| Internal | Onboard clock (internal VCSO)[11] |
| External | PFI 0 (front panel SMB connector) |
| Timebase frequency | 1 GHz [12] |
| Sample rate range Real-time sampling (single shot)[13] 15.26 kS/s to 1 GS/s TIS[14] mode (single shot) 2 GS/s (single channel only) Random interleaved sampling (RIS) mode[15] 2 GS/s to 20 GS/s in increments of 1 GS/s (repetitive waveforms only) | Real-time sampling (single shot)[13] |
| Real-time sampling (single shot)[13] | 15.26 kS/s to 1 GS/s |
| TIS[14] mode (single shot) | 2 GS/s (single channel only) |
| Random interleaved sampling (RIS) mode[15] | 2 GS/s to 20 GS/s in increments of 1 GS/s (repetitive waveforms only) |
| Timebase accuracy Not phase-locked to Reference clock ±30 ppm within ±3 ºC of external calibration temperature, plus an additional ±7 ppm per ºC outside of ±3 ºC of external calibration temperature, warranted Phase-locked to Reference clock Equal to the Reference clock accuracy[16] | Not phase-locked to Reference clock |
| Not phase-locked to Reference clock | ±30 ppm within ±3 ºC of external calibration temperature, plus an additional ±7 ppm per ºC outside of ±3 ºC of external calibration temperature, warranted |
| Phase-locked to Reference clock | Equal to the Reference clock accuracy[16] |
| Sample clock delay range | ±1 Sample clock period |
| Sample clock delay/adjustment resolution | ≤5 ps |
| Sources | PFI 0 (front panel SMB connector) |
| Frequency range[17] | 350 MHz to 1 GHz |
| Duty cycle tolerance | 45% to 55% |
| Sources | RTSI 7 PFI 0 (front panel SMB connector) |
| Frequency range[18] | 1 MHz to 20 MHz, in 1 MHz increments Default: 10 MHz |
| Duty cycle tolerance | 45% to 55% |
| Exported Reference clock destinations | RTSI <0..7> PFI 1 (front panel SMB connector) |
| Input voltage range | Sine wave: 0.65 Vpk-pk to 2.8 Vpk-pk (0 dBm to 13 dBm) |
| Maximum input overload | 7 V RMS with |Peaks| ≤10 V |
| Impedance | 50 Ω |
| Coupling | AC |
| Output impedance | 50 Ω |
| Logic type | 3.3 V CMOS, except when exporting 5 V |
| Maximum drive current | ±24 mA |
| Trigger types[19] | Edge Window Hysteresis Video Digital Immediate Software |
| Trigger sources | CH 0 CH 1 TRIG PFI <0..1> RTSI <0..6> Software |
| Time resolution Onboard clock, time-to-digital conversion circuit (TDC) on 5 ps Onboard clock, TDC off 1 ns External clock, TDC off External clock period | Onboard clock, time-to-digital conversion circuit (TDC) on |
| Onboard clock, time-to-digital conversion circuit (TDC) on | 5 ps |
| Onboard clock, TDC off | 1 ns |
| External clock, TDC off | External clock period |
| Minimum rearm time[20] TDC on 8 µs TDC off 1 µs | TDC on |
| TDC on | 8 µs |
| TDC off | 1 µs |
| Holdoff | From rearm time up to [(232 - 1) × Sample Clock Period] |
| Trigger delay | From 0 up to [(235 - 1) - Posttrigger Samples] × (1 / Sample Rate), in seconds |
| Trigger types | Edge Window Hysteresis |
| Sources | CH 0 (front panel BNC connector) CH 1 (front panel BNC connector) TRIG (front panel BNC connector) |
| Trigger level range CH 0, CH 1 100% FS TRIG (External trigger) ±5 V | CH 0, CH 1 |
| CH 0, CH 1 | 100% FS |
| TRIG (External trigger) | ±5 V |
| Voltage resolution | 8 bits (1 in 256) |
| Edge trigger sensitivity: CH 0, CH 1, TRIG (External trigger) 10% FS, DC to 300 MHz, Warranted 15% FS, >300 MHz to 700 MHz, Typical | Edge trigger sensitivity: CH 0, CH 1, TRIG (External trigger) |
| Edge trigger sensitivity: CH 0, CH 1, TRIG (External trigger) | 10% FS, DC to 300 MHz, Warranted 15% FS, >300 MHz to 700 MHz, Typical |
| Trigger level accuracy[21] CH 0, CH 1 ±5% FS up to 10 MHz, warranted TRIG (External trigger) ±1 V (±10% FS) up to 10 MHz, warranted | CH 0, CH 1 |
| CH 0, CH 1 | ±5% FS up to 10 MHz, warranted |
| TRIG (External trigger) | ±1 V (±10% FS) up to 10 MHz, warranted |
| Trigger jitter[21] | ≤14 ps RMS, typical 20 ps RMS maximum |
| Trigger filters Low frequency (LF) reject 50 kHz High frequency (HF) reject 50 kHz | Low frequency (LF) reject |
| Low frequency (LF) reject | 50 kHz |
| High frequency (HF) reject | 50 kHz |
| Trigger type | Digital |
| Sources | RTSI <0..6> PFI <0..1> (front panel SMB connector) |
| Connector | BNC |
| Impedance | 2.25 kΩ |
| Coupling | DC |
| Input voltage range | ±5 V |
| Maximum input overload | |Peaks| ≤10 V |
| Connector | SMB jack |
| Direction | Bidirectional |
| Destination | Start trigger (acquisition arm) Reference (stop) trigger Arm reference trigger Advance trigger |
| Input impedance | 150 kΩ, nominal |
| VIH | 2.0 V |
| VIL | 0.8 V |
| Maximum input overload | -0.5 V to 5.5 V |
| Maximum frequency | 25 MHz |
| Sources | Ready for Start Start trigger (acquisition arm) Ready for Reference Reference (stop) trigger End of Record Ready for Advance Advance trigger Done (end of acquisition) Probe Compensation[22] |
| Output impedance | 50 Ω |
| Logic type | 3.3 V CMOS |
| Maximum drive current | ±24 mA |
| Maximum frequency | 25 MHz |
| 8 MB standard (8 MS per channel) | 8 MB standard (8 MS) |
| 64 MB option (64 MS per channel) | 64 MB option (64 MS) |
| 256 MB option (256 MS per channel) | 256 MB option (256 MS) |
| Minimum record length | 1 sample |
| Number of pretrigger samples[23] | Zero up to full record length |
| Number of posttrigger samples[23] | Zero up to full record length |
| Maximum number of records in onboard memory[24] 8 MB per channel 32,768 64 MB per channel 100,000 256 MB per channel 100,000 | 8 MB per channel |
| 8 MB per channel | 32,768 |
| 64 MB per channel | 100,000 |
| 256 MB per channel | 100,000 |
| Allocated onboard memory per record | +(Record Length × 1 byte/sample) + 400 bytes+ rounded up to next multiple of 128 bytes |
| Interval for external calibration | 2 years |
| Warm-up time[25] | 15 minutes |
| Skew | 500 ps |
| Skew after manual adjustment | ≤5 ps |
| Sample clock delay/adjustment resolution | ≤5 ps |
| Current draw +3.3 V DC 2.5 A +5 V DC 2.4 A +12 V DC 250 mA | +3.3 V DC |
| +3.3 V DC | 2.5 A |
| +5 V DC | 2.4 A |
| +12 V DC | 250 mA |
| Total power | 23.25 W |
| Dimensions | 35.5 cm × 2.0 cm × 11.3 cm (14.0 in × 0.8 in × 4.4 in) |
| Weight | 439 g (15.5 oz) |
| Maximum altitude | 2,000 m (at 25 °C ambient temperature) |
| Pollution Degree | 2 |
| Ambient temperature range | 0 °C to 45 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) |
| Relative humidity range | 10% to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.) |
| Ambient temperature range | -40 °C to 71 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) |
| Relative humidity range | 5% to 95%, noncondensing (Tested in accordance with IEC 60068-2-56.) |
官方规格书:https://www.ni.com/docs/en-US/bundle/pci-5154-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答