总线连接:PXI混合
模拟输入阻抗:50 欧姆
示波器最大带宽:60 MHz
电压输入通道数量:8
60 MHz,8通道,12位PXI示波器
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
总线连接:PXI混合
模拟输入阻抗:50 欧姆
示波器最大带宽:60 MHz
电压输入通道数量:8
60 MHz,8通道,12位PXI示波器
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| Number of channels | Eight (simultaneously sampled) |
| Input type | Referenced single-ended |
| Connectors | SMB |
| Input impedance 50 Ω 50 Ω ±2% 1 MΩ 1 MΩ ±1% in parallel with a nominal capacitance of 50 pF | 50 Ω |
| 50 Ω | 50 Ω ±2% |
| 1 MΩ | 1 MΩ ±1% in parallel with a nominal capacitance of 50 pF |
| Input coupling | AC[1], DC |
| Full-scale (FS) input range 50 Ω and 1 MΩ 0.05 V 0.2 V 1 V 6 V 1 MΩ only 30 V | 50 Ω and 1 MΩ |
| 50 Ω and 1 MΩ | 0.05 V 0.2 V 1 V 6 V |
| 1 MΩ only | 30 V |
| Maximum input overload 50 Ω 7 Vrms with |Peaks| ≤10 V 1 MΩ |Peaks| ≤42 V | 50 Ω |
| 50 Ω | 7 Vrms with |Peaks| ≤10 V |
| 1 MΩ | |Peaks| ≤42 V |
| Resolution | 12 bits |
| 50 Ω | All |
| 1 MΩ | 0.05 V |
| 0.2 V, 1 V, and 6 V | ±(0.65% × Reading + 0.25% of FS + 600 µV) |
| 30 V | ±(0.75% × Reading + 0.25% of FS + 600 µV) |
| DC drift | ±(0.05% of Reading + 0.02% of FS + 20 µV) per °C |
| 50 Ω | All |
| 1 MΩ | 0.05 V |
| 0.2 V and 1 V | ±0.13 dB (±1.5%) of Reading |
| 6 V and 30 V | ±0.4 dB (±4.7%) of Reading |
| 50 Ω | All |
| 1 MΩ | 0.05 V |
| 0.2 V, 1 V, 6 V, and 30 V | ≤-80 dB at 1 MHz |
| 50 Ω | 0.05 V |
| 0.2 V, 1 V, and 6 V | 60 MHz |
| 1 MΩ | 0.05 V |
| 0.2 V, 1 V, 6 V, and 30 V | 60 MHz |
| Bandwidth-limiting filter | 24 MHz anti-alias filter |
| AC-coupling cutoff (-3 dB)[5] | 12 Hz |
| 0.2 V | 70 dBc |
| 1 V and 6 V | 65 dBc |
| 0.05 V | -72 dBc |
| 0.2 V | -75 dBc |
| 1 V | -65 dBc |
| 6 V | -68 dBc |
| 0.05 V | 50 dB |
| 0.2 V | 59 dB |
| 1 V | 61 dB |
| 6 V | 59 dB |
| 0.05 V | 0.18% of FS (90 µV) |
| 0.2 V | 0.060% of FS (120 µV) |
| 1 V | 0.03% of FS (300 µV) |
| 6 V | 0.055% of FS (3.3 mV) |
| 30 V | 0.03% of FS (9 mV) |
| 0.2 V | 72 dBc |
| 1 V and 6 V | 72 dBc |
| All | -75 dBc |
| 0.05 V | 59 dB |
| 0.2 V to 6 V | 62 dB |
| 0.05 V | 0.08% of FS (40 µV) |
| 0.2 V | 0.04% of FS (80 µV) |
| 1 V | 0.03% of FS (300 µV) |
| 6 V | 0.03% of FS (1.8 mV) |
| Channel-to-channel skew[10] 24 MHz bandwidth filter disabled ≤500 ps 24 MHz bandwidth filter enabled ≤600 ps | 24 MHz bandwidth filter disabled |
| 24 MHz bandwidth filter disabled | ≤500 ps |
| 24 MHz bandwidth filter enabled | ≤600 ps |
| Sources Internal Onboard clock (internal VCXO)[11] External PFI 1 PXI Star | Internal |
| Internal | Onboard clock (internal VCXO)[11] |
| External | PFI 1 PXI Star |
| External frequency range | 4 MHz to 65 MHz |
| Exporting[12] Destination PFI 1 Maximum frequency 65 MHz | Destination |
| Destination | PFI 1 |
| Maximum frequency | 65 MHz |
| Real-time sample rate range[13] | 915.5 S/s to 60 MS/s |
| Timebase frequency | 60 MHz |
| Timebase accuracy Not phase-locked to Reference clock ±25 ppm, warranted Phase-locked to Reference clock Equal to the Reference clock accuracy | Not phase-locked to Reference clock |
| Not phase-locked to Reference clock | ±25 ppm, warranted |
| Phase-locked to Reference clock | Equal to the Reference clock accuracy |
| Sample clock delay range | ±1 Sample clock period |
| Sample clock delay resolution | <10 ps |
| Sources | PFI 1 PXI Star |
| Frequency range[14] | 4 MHz to 65 MHz [15] |
| Duty cycle tolerance | 45% to 55% |
| Sources | PXI_CLK10 (backplane connector) PFI 1 (front panel SMB connector) |
| Frequency range[16] | 5 MHz to 20 MHz in 1 MHz increments |
| Duty cycle tolerance | 45% to 55% |
| Exported Reference clock destination | PFI 1 |
| Supported trigger | Reference (stop) trigger |
| Trigger types | Edge Window Hysteresis Digital Immediate Software |
| Trigger sources | CH 0 to CH 7 PFI 1 PXI_Trig <0..6> PXI Star trigger Software |
| Time resolution | Sample clock timebase period |
| Minimum rearm time[17] Internal Onboard clock 2.4 µs External Sample clock 144 × External clock period | Internal Onboard clock |
| Internal Onboard clock | 2.4 µs |
| External Sample clock | 144 × External clock period |
| Holdoff | From rearm time up to [(232 - 1) × Sample clock timebase period] |
| Delay | From 0 up to [(232 - 1) - Requested posttrigger samples] × (1/Actual sample rate), in seconds |
| Trigger types | Edge Window Hysteresis |
| Sources | CH 0 to CH 7 (front panel SMB connectors) |
| Trigger level range | 100% FS |
| Edge trigger sensitivity | 2% FS |
| Trigger jitter | Sample clock timebase period |
| Trigger type | Digital |
| Sources | PFI 1 (front panel SMB connector) PXI_TRIG <0..6> (backplane connector) PXI Star trigger (backplane connector) |
| Connector | PFI 1 (front panel SMB connector) |
| Direction | Bidirectional |
| Coupling | AC DC |
| Input voltage range Sine wave 0.65 Vpk-pk to 2.8 Vpk-pk (0 dBm to 13 dBm) Square wave 0.2 Vpk-pk to 2.8 Vpk-pk | Sine wave |
| Sine wave | 0.65 Vpk-pk to 2.8 Vpk-pk (0 dBm to 13 dBm) |
| Square wave | 0.2 Vpk-pk to 2.8 Vpk-pk |
| Maximum input overload | 7 Vrms with |Peaks| ≤10 V |
| Input impedance | 50 Ω |
| Coupling | AC |
| Destinations | Start trigger (acquisition arm) Reference (stop) trigger Arm Reference trigger Advance trigger |
| Input impedance | 150 kΩ, nominal |
| VIH | 2.0 V |
| VIL | 0.8 V |
| Maximum input overload | -0.5 V, 5.5 V |
| Maximum frequency | 65 MHz |
| Sources | Start trigger (acquisition arm) Reference (stop) trigger End of record Done (end of acquisition) Sample clock timebase Reference clock |
| Output impedance | 50 Ω |
| Logic type | 3.3 V CMOS |
| Maximum drive current | ±24 mA |
| Onboard memory size options[18] | 16 MB 128 MB 512 MB |
| Minimum record length | 1 sample |
| Number of samples[19] Pretrigger Zero up to full record length Posttrigger Zero up to full record length | Pretrigger |
| Pretrigger | Zero up to full record length |
| Posttrigger | Zero up to full record length |
| Allocated onboard memory per record[20] | [(Record length in samples × 2 bytes/sample × number of enabled channels) + 480] rounded up to the nearest 128 bytes |
| Interval for external calibration | 2 years |
| Warm-up time[21] | 15 minutes |
| Skew [22] | 500 ps |
| Average skew after manual adjustment [23] | <10 ps |
| Sample clock adjustment resolution | <10 ps |
| Current draw +3.3 V DC 1.5 A +5 V DC 1.7 A +12 V DC 200 mA -12 V DC 25 mA | +3.3 V DC |
| +3.3 V DC | 1.5 A |
| +5 V DC | 1.7 A |
| +12 V DC | 200 mA |
| -12 V DC | 25 mA |
| Total power | 16.15 W |
| Dimensions | 3U, one-slot, PXI/cPCI module 21.6 cm × 2.0 cm × 13.0 cm (8.5 in. × 0.8 in. × 5.1 in.) |
| Weight | 474 g (16.7 oz) |
| CH 0—CH 7 | SMB jack |
| PFI 1 | PFI line for trigger input/output, External clock in, Reference clock input/output, and timebase out. |
| Maximum altitude | 2,000 m (at 25 °C ambient temperature) |
| Pollution Degree | 2 |
| Ambient temperature range | 0 °C to 55 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) |
| Relative humidity range | 10% to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.) |
| Ambient temperature range | -40 °C to 71 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) |
| Relative humidity range | 5% to 95%, noncondensing (Tested in accordance with IEC 60068-2-56.) |
| Operational shock | 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Test profile developed in accordance with MIL-PRF-28800F.) |
| Random vibration Operating 5 Hz to 500 Hz, 0.31 grms (Tested in accordance with IEC 60068-2-64.) Nonoperating 5 Hz to 500 Hz, 2.46 grms (Tested in accordance with IEC 60068-2-64. Test profile exceeds the requirements of MIL-PRF-28800F, Class 3.) | Operating |
| Operating | 5 Hz to 500 Hz, 0.31 grms (Tested in accordance with IEC 60068-2-64.) |
| Nonoperating | 5 Hz to 500 Hz, 2.46 grms (Tested in accordance with IEC 60068-2-64. Test profile exceeds the requirements of MIL-PRF-28800F, Class 3.) |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxi-5105-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答