总线连接:PXI混合
模拟输入阻抗:50 欧姆
示波器最大带宽:125 MHz
电压输入通道数量:2
125 MHz,250 MS/s,8位PXI示波器
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
总线连接:PXI混合
模拟输入阻抗:50 欧姆
示波器最大带宽:125 MHz
电压输入通道数量:2
125 MHz,250 MS/s,8位PXI示波器
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| Number of channels | Two (simultaneously sampled) |
| Input type | Referenced single-ended |
| Connectors | BNC |
| Input impedance 50 Ω 50 Ω ± 1.5% 1 MΩ 1 MΩ ± 1% in parallel with a nominal capacitance of 26 pF | 50 Ω |
| 50 Ω | 50 Ω ± 1.5% |
| 1 MΩ | 1 MΩ ± 1% in parallel with a nominal capacitance of 26 pF |
| Input coupling | AC[1], DC, GND |
| 0.04 V | ±0.8 |
| 1 V | ±6.5 |
| 2 V | ±6.0 |
| 4 V | ±5.0 |
| 10 V | ±2.0 |
| 20 V | — |
| 40 V | — |
| Maximum input overload 50 Ω 7 V RMS with |Peaks| ≤10 V 1 MΩ |Peaks| ≤35 V | 50 Ω |
| 50 Ω | 7 V RMS with |Peaks| ≤10 V |
| 1 MΩ | |Peaks| ≤35 V |
| Resolution | 8 bits |
| DC accuracy[2] | ±[(1.5% × |Reading - Vertical Offset| + 2% of Vertical Offset + 0.3% of FS + 200 µV), warranted |
| DC drift | ±(0.03% × Reading + 0.06% of FS + 40 µV) per °C, nominal |
| Crosstalk[3] At 10 MHz input frequency ≤-60 dB At 100 MHz input frequency ≤-45 dB | At 10 MHz input frequency |
| At 10 MHz input frequency | ≤-60 dB |
| At 100 MHz input frequency | ≤-45 dB |
| Bandwidth (-3 dB) 0.04 Vpk-pk input range 100 MHz, warranted All other input ranges 125 MHz, warranted | 0.04 Vpk-pk input range |
| 0.04 Vpk-pk input range | 100 MHz, warranted |
| All other input ranges | 125 MHz, warranted |
| Rise/fall time 0.04 Vpk-pk input range 3.5 ns All other input ranges 2.8 ns | 0.04 Vpk-pk input range |
| 0.04 Vpk-pk input range | 3.5 ns |
| All other input ranges | 2.8 ns |
| Bandwidth-limiting filter | 20 MHz noise filter |
| AC coupling[4] cutoff (-3 dB) | 12 Hz |
| Passband flatness[5] | ±1 dB up to 50 MHz, warranted |
| Spurious-free dynamic range (SFDR)[6] | 58 dBc |
| Total harmonic distortion (THD)[6] | -58 dBc |
| Effective number of bits (ENOB), calculated[6] 0.04 Vpk-pk input range 6.2 All other input ranges 7.2 | 0.04 Vpk-pk input range |
| 0.04 Vpk-pk input range | 6.2 |
| All other input ranges | 7.2 |
| Signal to noise and distortion (SINAD)[6] 0.04 Vpk-pk input range 38 dB All other input ranges 44 dB | 0.04 Vpk-pk input range |
| 0.04 Vpk-pk input range | 38 dB |
| All other input ranges | 44 dB |
| 0.04 V | 0.45% FS |
| All other input ranges | 0.28% FS |
| Sources Internal[8] Onboard clock (internal VCXO) External CLK IN (front panel SMB connector) | Internal[8] |
| Internal[8] | Onboard clock (internal VCXO) |
| External | CLK IN (front panel SMB connector) |
| Sample rate range Real-time sampling (single-shot)[9] 3.815 kS/s to 250 MS/s Random interleaved sampling (RIS) 250 MS/s to 5 GS/s in 250 MS/s increments | Real-time sampling (single-shot)[9] |
| Real-time sampling (single-shot)[9] | 3.815 kS/s to 250 MS/s |
| Random interleaved sampling (RIS) | 250 MS/s to 5 GS/s in 250 MS/s increments |
| Timebase frequency[10] | 250 MHz |
| Timebase accuracy Not phase-locked to Reference clock ±25 ppm, warranted Phase-locked to Reference clock Equal to the Reference clock accuracy | Not phase-locked to Reference clock |
| Not phase-locked to Reference clock | ±25 ppm, warranted |
| Phase-locked to Reference clock | Equal to the Reference clock accuracy |
| Sample clock delay range | ±1 Sample clock period |
| Sample clock delay resolution | ≤20 ps |
| Source | CLK IN (front panel SMB connector) |
| Frequency range[11] | 50 MHz to 250 MHz |
| Duty cycle tolerance | 45% to 55% |
| Sources | PXI_CLK10 (backplane connector) CLK IN (front panel SMB connector) |
| Frequency range[12] | 5 MHz to 20 MHz in 1 MHz increments Default: 10 MHz |
| Duty cycle tolerance | 45% to 55% |
| Exported Reference clock destinations | PFI <0..1> (front panel 9-pinmini-circular DIN connector) PXI_Trig <0..7> (backplane connector) |
| Source | CLK IN (front panel SMB connector) |
| Input voltage range Sine wave 0.65 Vpk-pk to 2.8 Vpk-pk (0 dBm to 13 dBm) Square wave 0.2 Vpk-pk to 2.8 Vpk-pk | Sine wave |
| Sine wave | 0.65 Vpk-pk to 2.8 Vpk-pk (0 dBm to 13 dBm) |
| Square wave | 0.2 Vpk-pk to 2.8 Vpk-pk |
| Maximum input overload | 7 V RMS with |Peaks| ≤10 V |
| Impedance | 50 Ω |
| Coupling | AC |
| Trigger types[13] | Edge Window Hysteresis Video Digital Immediate Software |
| Trigger sources | CH 0 CH 1 TRIG PXI_Trig <0..6> PFI <0..1> PXI Star Trigger RTSI <0..6> Software |
| Time resolution Onboard clock, time-to-digital conversion circuit (TDC) on 40 ps Onboard clock, TDC off 4 ns External clock, TDC off External clock period | Onboard clock, time-to-digital conversion circuit (TDC) on |
| Onboard clock, time-to-digital conversion circuit (TDC) on | 40 ps |
| Onboard clock, TDC off | 4 ns |
| External clock, TDC off | External clock period |
| Minimum rearm time[14] TDC on 10 µs TDC off 2 µs | TDC on |
| TDC on | 10 µs |
| TDC off | 2 µs |
| Holdoff | From rearm time up to [(235 - 1) × Sample Clock Period] |
| Trigger delay | From 0 up to [(235 - 1) - Posttrigger Samples] × (1 / Sample Rate), in seconds |
| Trigger types | Edge Window Hysteresis |
| Sources | CH 0 (front panel BNC connector) CH 1 (front panel BNC connector) TRIG (front panel BNC connector) |
| Trigger level resolution | 8 bits (1 in 256) |
| Trigger level range CH 0, CH 1 100% FS TRIG (external trigger) ±5 V | CH 0, CH 1 |
| CH 0, CH 1 | 100% FS |
| TRIG (external trigger) | ±5 V |
| Edge trigger sensitivity CH 0, CH 1 5% FS up to 100 MHz, warranted TRIG (external trigger) 0.5 Vpk-pk up to 125 MHz, warranted | CH 0, CH 1 |
| CH 0, CH 1 | 5% FS up to 100 MHz, warranted |
| TRIG (external trigger) | 0.5 Vpk-pk up to 125 MHz, warranted |
| Level accuracy CH 0, CH 1 ±5% FS up to 100 MHz TRIG (external trigger) ±0.5 V up to 10 MHz | CH 0, CH 1 |
| CH 0, CH 1 | ±5% FS up to 100 MHz |
| TRIG (external trigger) | ±0.5 V up to 10 MHz |
| Jitter | ≤65 ps RMS |
| Trigger filters Low frequency (LF) reject 50 kHz High frequency (HF) reject 50 kHz | Low frequency (LF) reject |
| Low frequency (LF) reject | 50 kHz |
| High frequency (HF) reject | 50 kHz |
| Trigger type | Digital |
| Sources | PXI_Trig <0..6> (backplane connector) PFI <0..1> (front panel 9-pinmini-circular DIN connector) PXI Star trigger (backplane connector) |
| Trigger type | Video |
| Sources | CH 0 (front panel BNC connector) CH 1 (front panel BNC connector) TRIG (front panel BNC connector) |
| Video trigger types | Specific Line Any Line Specific Field |
| Standards[15] SDTV M-NTSC B/G-PAL SECAM M-PAL EDTV 480i/59.94 fps 480i/60 fps 480p/59.94 Fps 480p/60 Fps 576i/50 fps 576p/50 Fps HDTV[16] 720p/50 Fps 720p/59.94 Fps 720p/60 Fps 1080i/50 fps 1080i/59.94 fps 1080i/60 fps 1080p/24 Fps | SDTV |
| SDTV | M-NTSC B/G-PAL SECAM M-PAL |
| EDTV | 480i/59.94 fps 480i/60 fps 480p/59.94 Fps 480p/60 Fps 576i/50 fps 576p/50 Fps |
| HDTV[16] | 720p/50 Fps 720p/59.94 Fps 720p/60 Fps 1080i/50 fps 1080i/59.94 fps 1080i/60 fps 1080p/24 Fps |
| Connector | TRIG (front panel BNC connector) |
| Impedance | 1 MΩ in parallel with 22 pF |
| Coupling | AC, DC |
| AC-coupling cutoff (-3 dB) | 12 Hz |
| Input voltage range | ±5 V |
| Maximum input overload | |Peaks| ≤42 V |
| Connector | AUX I/O (front panel 9-pinmini-circular DIN connector) |
| Direction | Bidirectional |
| As an Input (Trigger) Destinations Start trigger (acquisition arm) Reference (Stop) trigger Arm reference trigger Advance trigger Input impedance 150 kΩ, nominal VIH 2.0 V VIL 0.8 V Maximum input overload -0.5 V, 5.5 V Maximum frequency 25 MHz | Destinations |
| Destinations | Start trigger (acquisition arm) Reference (Stop) trigger Arm reference trigger Advance trigger |
| Input impedance | 150 kΩ, nominal |
| VIH | 2.0 V |
| VIL | 0.8 V |
| Maximum input overload | -0.5 V, 5.5 V |
| Maximum frequency | 25 MHz |
| As an Output (Event) Sources Start trigger (acquisition arm) Reference (Stop) trigger End of Record Done (end of acquisition) Probe Compensation[17] Output impedance 50 Ω Logic type 3.3 V CMOS Maximum drive current ±24 mA Maximum frequency 25 MHz | Sources |
| Sources | Start trigger (acquisition arm) Reference (Stop) trigger End of Record Done (end of acquisition) Probe Compensation[17] |
| Output impedance | 50 Ω |
| Logic type | 3.3 V CMOS |
| Maximum drive current | ±24 mA |
| Maximum frequency | 25 MHz |
| Onboard memory sizes[18] | 8 MB per channel (standard) 64 MB per channel (option) 256 MB per channel (option) |
| Minimum record length | 1 sample |
| Number of pretrigger samples[19] | Zero up to full record length |
| Number of posttrigger samples[19] | Zero up to full record length |
| Maximum number of records in onboard memory[20] 8 MB 32,768 64 MB 100,000 256 MB 100,000 | 8 MB |
| 8 MB | 32,768 |
| 64 MB | 100,000 |
| 256 MB | 100,000 |
| Allocated onboard memory per record | (Record Length × 1 byte/sample) + 240 bytes, rounded up to next multiple of 128 bytes (minimum 256 bytes) |
| Interval for external calibration | 2 years |
| Warm-up time[21] | 15 minutes |
| Skew [22] | 500 ps |
| Average skew after manual adjustment [23] | <20 ps |
| Sample clock adjustment resolution | <20 ps |
| Current draw +3.3 VDC 840 mA +5 VDC 1.1 A +12 VDC 250 mA -12 VDC 170 mA | +3.3 VDC |
| +3.3 VDC | 840 mA |
| +5 VDC | 1.1 A |
| +12 VDC | 250 mA |
| -12 VDC | 170 mA |
| Total power | 13.32 W |
| Dimensions | 3U, one-slot, PXI/cPCI module 21.6 cm × 2.0 cm × 13.0 cm (8.5 in × 0.8 in × 5.1 in) |
| Weight | 455 g (16 oz) |
| CH 0 | BNC female |
| CH 1 | Analog input connection; digitizes data and triggers acquisitions. |
| TRIG | External analog trigger; signals on the TRIG connector cannot be digitized. |
| CLK IN | SMB jack |
| AUX I/O | 9-pin mini-circular DIN |
| ACCESS | The ACCESS LED indicates the status of the PCI bus and the interface from the device to the controller. |
| ACTIVE | The ACTIVE LED indicates the status of the onboard acquisition hardware of the device. |
| Maximum altitude | 2,000 m (at 25 °C ambient temperature) |
| Pollution Degree | 2 |
| Ambient temperature range | 0 °C to 55 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) |
| Relative humidity range | 10% to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.) |
| Ambient temperature range | -40 °C to 71 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) |
| Relative humidity range | 5% to 95%, noncondensing (Tested in accordance with IEC 60068-2-56.) |
| Operational shock | 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Test profile developed in accordance with MIL-PRF-28800F.) |
| Random vibration Operating 5 Hz to 500 Hz, 0.31 grms (Tested in accordance with IEC 60068-2-64.) Nonoperating 5 Hz to 500 Hz, 2.46 grms (Tested in accordance with IEC 60068-2-64. Test profile exceeds the requirements of MIL-PRF-28800F, Class 3.) | Operating |
| Operating | 5 Hz to 500 Hz, 0.31 grms (Tested in accordance with IEC 60068-2-64.) |
| Nonoperating | 5 Hz to 500 Hz, 2.46 grms (Tested in accordance with IEC 60068-2-64. Test profile exceeds the requirements of MIL-PRF-28800F, Class 3.) |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxi-5114-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答