ONETEST 欢迎您

厂商登录 | 入驻

登录 | 注册 购物车 微信公众号
请完成安全验证

类似产品

同厂商产品

PXI-5154 1GHz 2GS/s 数字化仪|NI

PXI-5154 1GHz 2GS/s 数字化仪|NI (在产)

总线连接:PXI混合

模拟输入阻抗:50 欧姆

示波器最大带宽:1 GHz

电压输入通道数量:2

1 GHz, 2 GS/s, 8位PXI示波器

参考价格 :

厂家:NI (收录356个产品)

产地:美国 奥斯汀

点击访问厂家官网

产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案

PXI-5154 780319-02 780319-03 1 GHz, 2 GS/s, 8位PXI示波器 | NI - onetest仪器资源库

NI
PXI-5154 780319-02 780319-03 1 GHz, 2 GS/s, 8位PXI示波器
总线连接 PXI混合 · 模拟输入阻抗 50 欧姆 · 示波器最大带宽 1 GHz
产品简介
PXI-5154是采集和表征快速纳秒级边沿速度的理想选择。
它非常适合消费电子、半导体、航空航天/国防和生命科学行业的自动化测试和数据流应用。
PXI-5154还配备高达256 MB的每通道内存,可在扩展的数据采集窗口中提供高持续采样率。
该数字化仪针对自动化测试进行了优化,使用高吞吐率总线缩短测试时间,在模块间提供皮秒级的同步,并与整套NI硬件集成,因此您可以创建和自定义完整的混合信号或高通道数测试系统。
780319-02 780319-03 1 GHz, 2 GS/s, 8位PXI示波器
核心参数
• 总线连接:PXI混合
• 模拟输入阻抗:50 欧姆
• 示波器最大带宽:1 GHz
• 电压输入通道数量:2
• 最大采样率:2 GS/s
• 模拟输入电压范围:-2.5 V 至 2.5 V
• 模拟输入分辨率:8 bits
• CableSense™:否
• 可支持的硬件平台:PXI
• 可重配置:否
• 支持点对点数据流:否
• 模拟输入耦合:AC-DC
• 密封:是
• 板载数字下变频器:否
资源下载
• PXI-5154 780319-02 780319-03 1 GHz, 2 GS/s, 8位PXI示波器 的全部技术指标已单独整理,见本产品详情页「详细指标」标签。
以上内容与指标均取自NI(NI)官网该产品详情页与官方产品资料,未标注口径的为厂家公布值。
NI · onetest 仪器资源库

 

 

主要技术指标

以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。

Analog Input (Channel 0 and Channel 1)

Number of channelsTwo (simultaneously sampled)
ConnectorsBNC

Impedance and Coupling

Input impedance50 Ω ± 2 Ω
Voltage Standing Wave Ratio (VSWR)1.27 DC to 1 GHz
Input couplingAC, DC, GND

Voltage Levels

Full scale (FS) input ranges (Vpk-pk)0.1 V 0.2 V 0.5 V 1 V 2 V 5 V
Maximum input overload7 V RMS with |Peaks| ≤10 V

Accuracy

Resolution8 bits
DC accuracy[1] 0.1 V to 1 V input range ±(1.0% of input + 1.3% of FS), typical ±(2.2% of input + 1.8% of FS), warranted 2 V to 5 V input range ±(1.4% of input + 1.3% of FS), typical ±(2.9% of input + 1.8% of FS), warranted0.1 V to 1 V input range
0.1 V to 1 V input range±(1.0% of input + 1.3% of FS), typical ±(2.2% of input + 1.8% of FS), warranted
2 V to 5 V input range±(1.4% of input + 1.3% of FS), typical ±(2.9% of input + 1.8% of FS), warranted
DC drift[2]±(0.14% of input + 0.05% of FS) per °C, nominal
Crosstalk CH 0 to/from CH 1[3] <-80 dB at 10 MHz <-60 dB at 100 MHz External trigger to CH 0 or CH 1[4] <-80 dB at 10 MHz <-70 dB at 100 MHzCH 0 to/from CH 1[3]
CH 0 to/from CH 1[3]<-80 dB at 10 MHz <-60 dB at 100 MHz
External trigger to CH 0 or CH 1[4]<-80 dB at 10 MHz <-70 dB at 100 MHz

Bandwidth and Transient Response

Bandwidth (-3 dB)[5],[6]1 GHz minimum[7], warranted
Rise/fall time[6]428 ps
Bandwidth limit filter20 MHz noise filter
AC coupling cutoff (-3 dB)[8]114 kHz

Spectral Characteristics

ENOB[9] Noise filter on 7.3 Noise filter off 6.7Noise filter on
Noise filter on7.3
Noise filter off6.7
Signal to noise distortion (SINAD)[9] Noise filter on 45 dB Noise filter off 41 dBNoise filter on
Noise filter on45 dB
Noise filter off41 dB

Noise

0.10.37% FS
0.2 to 50.32% FS
Channel-to-channel skew<140 ps

Sample Clock

Sources Internal Onboard clock (internal VCSO)[11] External PFI 0 (front panel SMB connector)Internal
InternalOnboard clock (internal VCSO)[11]
ExternalPFI 0 (front panel SMB connector)
Timebase frequency1 GHz [12]

Onboard Clock (Internal VCSO)

Sample rate range Real-time sampling (single shot)[13] 15.26 kS/s to 1 GS/s TIS[14] mode (single shot) 2 GS/s (single channel only) Random interleaved sampling (RIS) mode[15] 2 GS/s to 20 GS/s in increments of 1 GS/s (repetitive waveforms only)Real-time sampling (single shot)[13]
Real-time sampling (single shot)[13]15.26 kS/s to 1 GS/s
TIS[14] mode (single shot)2 GS/s (single channel only)
Random interleaved sampling (RIS) mode[15]2 GS/s to 20 GS/s in increments of 1 GS/s (repetitive waveforms only)
Timebase accuracy Not phase-locked to Reference clock ±30 ppm within ±3 ºC of external calibration temperature, plus an additional ±7 ppm per ºC outside of ±3 ºC of external calibration temperature, warranted Phase-locked to Reference clock Equal to the Reference clock accuracy[16]Not phase-locked to Reference clock
Not phase-locked to Reference clock±30 ppm within ±3 ºC of external calibration temperature, plus an additional ±7 ppm per ºC outside of ±3 ºC of external calibration temperature, warranted
Phase-locked to Reference clockEqual to the Reference clock accuracy[16]
Sample clock delay range±1 Sample clock period
Sample clock delay/adjustment resolution≤5 ps

External Sample Clock

SourcesPFI 0 (front panel SMB connector)
Frequency range[17]350 MHz to 1 GHz
Duty cycle tolerance45% to 55%

Phase-Locked Loop (PLL) Reference Clock

SourcesPXI_CLK10 (PXI backplane connector) PFI 0 (front panel SMB connector)
Frequency range[18]5 MHz to 20 MHz in 1 MHz increments Default: 10 MHz
Duty cycle tolerance45% to 55%
Exported Reference Clock destinationsPXI_Trig <0..7> (backplane connector) PFI 1 (front panel SMB connector)
Input voltage rangeSine wave: 0.65 Vpk-pk to 2.8 Vpk-pk (0 dBm to 13 dBm)
Maximum input overload7 V RMS with |Peaks| ≤10 V
Impedance50 Ω
CouplingAC

Reference Clock Output (PFI 1, Front Panel Connector)

Output impedance50 Ω
Logic type3.3 V CMOS, except when exporting 5 V
Maximum drive current±24 mA

Trigger

Trigger types[19]Edge Window Hysteresis Video Digital Immediate Software
Trigger sourcesCH 0 CH 1 TRIG PFI <0..1> RTSI <0..6> Software
Time resolution Onboard clock, time-to-digital conversion circuit (TDC) on 5 ps Onboard clock, TDC off 1 ns External clock, TDC off External clock periodOnboard clock, time-to-digital conversion circuit (TDC) on
Onboard clock, time-to-digital conversion circuit (TDC) on5 ps
Onboard clock, TDC off1 ns
External clock, TDC offExternal clock period
Minimum rearm time[20] TDC on 8 µs TDC off 1 µsTDC on
TDC on8 µs
TDC off1 µs
HoldoffFrom rearm time up to [(232 - 1) × Sample Clock Period]
Trigger delayFrom 0 up to [(235 - 1) - Posttrigger Samples] × (1 / Sample Rate), in seconds

Analog Trigger

Trigger typesEdge Window Hysteresis
SourcesCH 0 (front panel BNC connector) CH 1 (front panel BNC connector) TRIG (front panel BNC connector)
Trigger level range CH 0, CH 1 100% FS TRIG (External trigger) ±5 VCH 0, CH 1
CH 0, CH 1100% FS
TRIG (External trigger)±5 V
Voltage resolution8 bits (1 in 256)
Edge trigger sensitivity: CH 0, CH 1, TRIG (External trigger) 10% FS, DC to 300 MHz, Warranted 15% FS, >300 MHz to 700 MHz, TypicalEdge trigger sensitivity: CH 0, CH 1, TRIG (External trigger)
Edge trigger sensitivity: CH 0, CH 1, TRIG (External trigger)10% FS, DC to 300 MHz, Warranted 15% FS, >300 MHz to 700 MHz, Typical
Trigger level accuracy[21] CH 0, CH 1 ±5% FS up to 10 MHz, warranted TRIG (External trigger) ±1 V (±10% FS) up to 10 MHz, warrantedCH 0, CH 1
CH 0, CH 1±5% FS up to 10 MHz, warranted
TRIG (External trigger)±1 V (±10% FS) up to 10 MHz, warranted
Trigger jitter[21]≤14 ps RMS, typical 20 ps RMS maximum
Trigger filters Low frequency (LF) reject 50 kHz High frequency (HF) reject 50 kHzLow frequency (LF) reject
Low frequency (LF) reject50 kHz
High frequency (HF) reject50 kHz

Digital Trigger

Trigger typeDigital
SourcesPXI_Trig <0..6> (backplane connector) PFI <0..1> (front panel SMB connectors) PXI Star Trigger (backplane connector)

External Trigger Input (Front Panel Connector)

ConnectorBNC
Impedance2.25 kΩ
CouplingDC
Input voltage range±5 V
Maximum input overload|Peaks| ≤10 V
ConnectorSMB jack
DirectionBidirectional

As an Input (Trigger)

DestinationStart trigger (acquisition arm) Reference (stop) trigger Arm reference trigger Advance trigger
Input impedance150 kΩ, nominal
VIH2.0 V
VIL0.8 V
Maximum input overload-0.5 V to 5.5 V
Maximum frequency25 MHz

As an Output (Event)

SourcesReady for Start Start trigger (acquisition arm) Ready for Reference Reference (stop) trigger End of Record Ready for Advance Advance trigger Done (end of acquisition) Probe Compensation[22]
Output impedance50 Ω
Logic type3.3 V CMOS
Maximum drive current±24 mA
Maximum frequency25 MHz

Waveform Specifications

8 MB standard (8 MS per channel)8 MB standard (8 MS)
64 MB option (64 MS per channel)64 MB option (64 MS)
256 MB option (256 MS per channel)256 MB option (256 MS)
Minimum record length1 sample
Number of pretrigger samples[23]Zero up to full record length
Number of posttrigger samples[23]Zero up to full record length
Maximum number of records in onboard memory[24] 8 MB per channel 32,768 64 MB per channel 100,000 256 MB per channel 100,0008 MB per channel
8 MB per channel32,768
64 MB per channel100,000
256 MB per channel100,000
Allocated onboard memory per record+(Record Length × 1 byte/sample) + 400 bytes+ rounded up to next multiple of 128 bytes

Calibration Specifications

Interval for external calibration2 years
Warm-up time[25]15 minutes

TClk Specifications

Skew[26]500 ps
Skew after manual adjustment≤5 ps
Sample clock delay/adjustment resolution≤5 ps

Power

Current draw +3.3 VDC 1.7 A +5 VDC 1.8 A +12 VDC 520 mA -12 VDC 200 mA+3.3 VDC
+3.3 VDC1.7 A
+5 VDC1.8 A
+12 VDC520 mA
-12 VDC200 mA
Total power23.25 W

Physical

Dimensions3U, one-slot, PXI module 21.6 cm × 2.0 cm × 13.0 cm (8.5 in × 0.8 in × 5.1 in)
Weight481 g (16.97 oz)

Environment

Maximum altitude2,000 m (at 25 °C ambient temperature)
Pollution Degree2

Operating Environment

Ambient temperature range0 °C to 55 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.)
Relative humidity range10% to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.)

Storage Environment

Ambient temperature range-40 °C to 71 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.)
Relative humidity range5% to 95%, noncondensing (Tested in accordance with IEC 60068-2-56.)

Shock and Vibration

Operational shock30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Test profile developed in accordance with MIL-PRF-28800F.)
Random vibration Operating 5 Hz to 500 Hz, 0.31 grms (Tested in accordance with IEC 60068-2-64.) Nonoperating 5 Hz to 500 Hz, 2.46 grms (Tested in accordance with IEC 60068-2-64. Test profile exceeds the requirements of MIL-PRF-28800F, Class 3.)Operating
Operating5 Hz to 500 Hz, 0.31 grms (Tested in accordance with IEC 60068-2-64.)
Nonoperating5 Hz to 500 Hz, 2.46 grms (Tested in accordance with IEC 60068-2-64. Test profile exceeds the requirements of MIL-PRF-28800F, Class 3.)

官方规格书:https://www.ni.com/docs/en-US/bundle/pxi-5154-specs/page/specs.html

全部

 

NI官方渠道


官方渠道(官网 / 热线 / 邮箱)


官方渠道(中国大陆)


• 官网 www.ni.com/zh-cn


• 在线选购 www.ni.com/zh-cn/shop.html


• 经销商查询

官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html


• 联系方式

NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)


全国办事处


公司总部


• NI(National Instruments)


• 地址

11500 N Mopac Expwy, Austin, TX 78759-3504, United States


• 母公司

Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)


 

0条提问

X

提问

X

回答

暂无视频

 

0条口碑
X

发表口碑

口碑标题
口碑
上传图片

ONETEST仪器资源库

联系电话:+86-755-23033660

电子邮箱:info@onetest.cn

Onetest仪器资源库

公众号

Onetest仪器资源库

视频号

Onetest仪器资源库

bilibili

Onetest仪器资源库

小助手

© 2026 Onetest仪器资源库 All Rights Reserved   粤ICP备17028186号-2      粤公网安备44030902003758

AI问答