总线连接:PXI Express
模拟输入阻抗:50 欧姆
示波器最大带宽:350 MHz
电压输入通道数量:2
PXIe,350MHz,3 GS/s,8位PXI示波器
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
总线连接:PXI Express
模拟输入阻抗:50 欧姆
示波器最大带宽:350 MHz
电压输入通道数量:2
PXIe,350MHz,3 GS/s,8位PXI示波器
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| 1 | CH 0 |
| 2 | CH 1 |
| 3 | PFI 0 |
| 4 | PFI 1 |
| 5 | PFI 2 |
| 6 | PFI 3 |
| 7 | 5 V square wave |
| 8 | Ground |
| Number of channels | Two (simultaneously sampled) |
| Input type | Referenced single-ended |
| Connectors | BNC, ground referenced |
| Input impedance | 50 Ω ±1.5%, typical 1 MΩ ±1.0%, typical |
| Input capacitance (1 MΩ) | 15.4 pF |
| Input coupling | AC DC |
| 0.04 V | ±5 V |
| 0.1 V | ±5 V |
| 0.2 V | ±5 V |
| 0.4 V | ±5 V |
| 1 V | ±5 V |
| 2 V | ±5 V |
| 4 V | ±5 V |
| 10 V | ±2 V |
| 20 V | — |
| 40 V | — |
| Maximum input overload 50 Ω |Peaks| ≤7 V 1 MΩ[2] |Peaks| ≤250 V DC | 50 Ω |
| 50 Ω | |Peaks| ≤7 V |
| 1 MΩ[2] | |Peaks| ≤250 V DC |
| Resolution | 8 bits |
| 50 Ω Input range: 0.04 V ±[(2% × |Reading - Vertical Offset|) + (0.4% × |Vertical Offset|)+ (1% of FS)+ 0.2 mV], typical Input range: 0.1 V to 4 V ±[(2% × |Reading - Vertical Offset|) + (0.4% × |Vertical Offset|)+ (1% of FS)+ 0.2 mV], warranted Input range: 10 V ±[(2% × |Reading - Vertical Offset|)+ (1.1% × |Vertical Offset|)+ (1% of FS)+ 0.2 mV], warranted | Input range: 0.04 V |
| Input range: 0.04 V | ±[(2% × |Reading - Vertical Offset|) + (0.4% × |Vertical Offset|)+ (1% of FS)+ 0.2 mV], typical |
| Input range: 0.1 V to 4 V | ±[(2% × |Reading - Vertical Offset|) + (0.4% × |Vertical Offset|)+ (1% of FS)+ 0.2 mV], warranted |
| Input range: 10 V | ±[(2% × |Reading - Vertical Offset|)+ (1.1% × |Vertical Offset|)+ (1% of FS)+ 0.2 mV], warranted |
| 1 MΩ Input range: 0.04 V ±[(2% × |Reading - Vertical Offset|)+ (0.4% × |Vertical Offset|)+ (1% of FS)+ 0.2 mV], typical Input range: 0.1 V to 20 V ±[(2% × |Reading - Vertical Offset|)+ (0.4% × |Vertical Offset|)+ (1% of FS)+ 0.2 mV], warranted Input range: 40 V ±[(2% × |Reading - Vertical Offset|)+ (1.1% × |Vertical Offset|)+ (1% of FS)+ 0.2 mV], warranted | Input range: 0.04 V |
| Input range: 0.04 V | ±[(2% × |Reading - Vertical Offset|)+ (0.4% × |Vertical Offset|)+ (1% of FS)+ 0.2 mV], typical |
| Input range: 0.1 V to 20 V | ±[(2% × |Reading - Vertical Offset|)+ (0.4% × |Vertical Offset|)+ (1% of FS)+ 0.2 mV], warranted |
| Input range: 40 V | ±[(2% × |Reading - Vertical Offset|)+ (1.1% × |Vertical Offset|)+ (1% of FS)+ 0.2 mV], warranted |
| DC drift[4] | ±[(0.2% × |Reading - Vertical Offset|)+ (0.004% × |Vertical Offset|)+ (0.013% of FS)] per °C |
| AC amplitude accuracy[3] | ±0.25 dB at 50 kHz |
| AC amplitude drift[4] | ±0.0026 dB per °C at 50 kHz |
| Crosstalk[5] Input frequency: ≤200 MHz <-60 dB Input frequency: 200 MHz to 350 MHz <-50 dB | Input frequency: ≤200 MHz |
| Input frequency: ≤200 MHz | <-60 dB |
| Input frequency: 200 MHz to 350 MHz | <-50 dB |
| Bandwidth (-3 dB)[6] 50 Ω [7] 325 MHz, warranted 350 MHz, typical 1 MΩ [8] 350 MHz, typical | 50 Ω [7] |
| 50 Ω [7] | 325 MHz, warranted 350 MHz, typical |
| 1 MΩ [8] | 350 MHz, typical |
| Bandwidth-limiting filter | 20 MHz noise filter |
| AC-coupling cutoff (-3 dB) | 10 Hz |
| Spurious-free dynamic range (SFDR)[10] | -45 dBc |
| 0.1 V to 4 V | 7.3 |
| 0.04 V | 6.7 |
| Total harmonic distortion (THD)[10] | -45 dBc |
| RMS noise[12] 0.04 Vpk-pk 0.45% of FS All other ranges 0.25% of FS | 0.04 Vpk-pk |
| 0.04 Vpk-pk | 0.45% of FS |
| All other ranges | 0.25% of FS |
| Source | Onboard clock (internal oscillator) |
| Sample rate range, real time[13] | 22.89 kS/s to 1.5 GS/s |
| Sample rate, time-interleaved sampling (TIS) mode[14] | 3.0 GS/s |
| Timebase frequency | 1.5 GHz |
| Timebase accuracy[15] | ±50 ppm |
| Sample clock jitter[16] | 1.1 ps RMS |
| Sources Internal Onboard clock (internal oscillator) External PXI_Clk100 (backplane connector) | Internal |
| Internal | Onboard clock (internal oscillator) |
| External | PXI_Clk100 (backplane connector) |
| Duty cycle tolerance | 45% to 55%, typical |
| Supported triggers | Reference (Stop) Trigger Reference (Arm) Trigger Start Trigger (Acquisition Arm) Advance Trigger |
| Trigger types | Edge Glitch Hysteresis Runt Width Window Digital Immediate Software |
| Trigger sources | CH 0 CH 1 PFI <0..3> PXI_Trig <0..7> |
| Minimum dead time Interpolator enabled 400 ns Interpolator disabled 400 ns | Interpolator enabled |
| Interpolator enabled | 400 ns |
| Interpolator disabled | 400 ns |
| Trigger delay | 0 to 7.51 × 1014 ns [(251 - 1) * Sample Clock Period] |
| Holdoff | Dead time to 6.15 × 1018 ns [(264 - 1) * Sample Clock Period] |
| Sources | CH 0 CH 1 |
| Enabled | 0.326 ps |
| Disabled | 0.333 ns |
| Trigger filters Low frequency (LF) reject 100 kHz High frequency (HF) reject 100 kHz | Low frequency (LF) reject |
| Low frequency (LF) reject | 100 kHz |
| High frequency (HF) reject | 100 kHz |
| Minimum threshold duration[17] | Sample clock period |
| Sources | PFI <0..3> (front panel HD-BNC connectors) PXI_Trig <0..7> (backplane connector) |
| Time resolution PFI 1.333 ns PXI_Trig 5.333 ns | PFI |
| PFI | 1.333 ns |
| PXI_Trig | 5.333 ns |
| Connectors | PFI <0..3> (front panel HD-BNC connectors) |
| Direction | Bidirectional per channel |
| As an input (trigger) Destinations Start Trigger (Acquisition Arm) Reference (Stop) Trigger Reference (Arm) Trigger Advance Trigger Input impedance 49.9 kΩ VIH 2 V, typical VIL 0.8 V, typical Recommended input range 0 V to 3.3 V Maximum input overload +5 V tolerant Minimum pulse width 10 ns | Destinations |
| Destinations | Start Trigger (Acquisition Arm) Reference (Stop) Trigger Reference (Arm) Trigger Advance Trigger |
| Input impedance | 49.9 kΩ |
| VIH | 2 V, typical |
| VIL | 0.8 V, typical |
| Recommended input range | 0 V to 3.3 V |
| Maximum input overload | +5 V tolerant |
| Minimum pulse width | 10 ns |
| As an output (event) Sources Ready for Start Start Trigger (Acquisiton Arm) Ready for Reference Reference (Stop) Trigger End of Record Ready for Advance Advance Trigger Done (End of Acquisition) Output impedance 50 Ω Logic type 3.3 V CMOS Maximum current drive 12 mA Maximum frequency 50 MHz Minimum pulse width 10 ns | Sources |
| Sources | Ready for Start Start Trigger (Acquisiton Arm) Ready for Reference Reference (Stop) Trigger End of Record Ready for Advance Advance Trigger Done (End of Acquisition) |
| Output impedance | 50 Ω |
| Logic type | 3.3 V CMOS |
| Maximum current drive | 12 mA |
| Maximum frequency | 50 MHz |
| Minimum pulse width | 10 ns |
| Connectors | Probe compensation terminal Ground terminal |
| Output voltage[18] | 0 V to 5 V |
| Maximum overload voltage | 25 V DC |
| CableSense pulse voltage[19] | 0.4 V |
| CableSense pulse rise time[20] | 1.6 ns |
| Available onboard memory sizes[21] | 64 MB 512 MB |
| Minimum record length | 1 sample |
| Number of samples Pretrigger 0 up to (Record Length - 1) Posttrigger 0 up to Record Length | Pretrigger |
| Pretrigger | 0 up to (Record Length - 1) |
| Posttrigger | 0 up to Record Length |
| Maximum number of records in onboard memory[22] | 100,000 |
| 2 | 1 |
| 2 | 1 |
| 2 | 1 |
| 2 | 1 |
| Interval for external calibration | 2 years |
| Warm-up time[23] | 15 minutes |
| Channel-to-channel skew, between the channels of a PXIe-5111 50 Ω <60 ps 1 MΩ <60 ps | 50 Ω |
| 50 Ω | <60 ps |
| 1 MΩ | <60 ps |
| Module-to-module skew, between PXIe-5111 modules using NI-TClk [25] NI-TClk synchronization without manual adjustment [26] Skew, peak-to-peak [27] 200 ps Jitter, peak-to-peak [28] 120 ps NI-TClk synchronization with manual adjustment [26] Skew, average [27] 10 ps Jitter, peak-to-peak [28] 8 ps | NI-TClk synchronization without manual adjustment [26] Skew, peak-to-peak [27] 200 ps Jitter, peak-to-peak [28] 120 ps |
| NI-TClk synchronization without manual adjustment [26] Skew, peak-to-peak [27] 200 ps Jitter, peak-to-peak [28] 120 ps | Skew, peak-to-peak [27] |
| Skew, peak-to-peak [27] | 200 ps |
| Jitter, peak-to-peak [28] | 120 ps |
| NI-TClk synchronization with manual adjustment [26] Skew, average [27] 10 ps Jitter, peak-to-peak [28] 8 ps | Skew, average [27] |
| Skew, average [27] | 10 ps |
| Jitter, peak-to-peak [28] | 8 ps |
| Sample Clock delay/adjustment resolution | <1 ps |
| Current draw +3.3 V DC 1.82 A +12 V DC 1.16 A | +3.3 V DC |
| +3.3 V DC | 1.82 A |
| +12 V DC | 1.16 A |
| Power draw +3.3 V DC 6 W +12 V DC 14 W Total 20 W | +3.3 V DC |
| +3.3 V DC | 6 W |
| +12 V DC | 14 W |
| Total | 20 W |
| Total maximum power allowed | 30 W |
| Dimensions | 3U, one-slot, PXI Express/CompactPCI Express module 2.0 cm × 13.0 cm × 21.6 cm (0.8 in × 5.1 in × 8.5 in) |
| Weight | 380 g (13.4 oz) |
| Form factor | Gen 1 x4 module |
| Slot compatibility | PXI Express or hybrid |
| Temperature Operating 0 °C to 55 °C Storage -40 °C to 71 °C | Operating |
| Operating | 0 °C to 55 °C |
| Storage | -40 °C to 71 °C |
| Humidity Operating 10% to 90%, noncondensing Storage 5% to 95%, noncondensing | Operating |
| Operating | 10% to 90%, noncondensing |
| Storage | 5% to 95%, noncondensing |
| Pollution Degree | 2 |
| Maximum altitude | 4,600 m (at 25 °C ambient temperature) |
| Shock and Vibration Operating vibration 5 Hz to 500 Hz, 0.3 g RMS Non-operating vibration 5 Hz to 500 Hz, 2.4 g RMS Operating shock 30 g, half-sine, 11 ms pulse | Operating vibration |
| Operating vibration | 5 Hz to 500 Hz, 0.3 g RMS |
| Non-operating vibration | 5 Hz to 500 Hz, 2.4 g RMS |
| Operating shock | 30 g, half-sine, 11 ms pulse |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxie-5111-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答