总线连接:PXI Express
模拟输入阻抗:50 欧姆
示波器最大带宽:1.5 GHz
最大采样率:5 GS/s
PXIe,1.5 GHz,5 GS/s,10位PXI示波器
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
总线连接:PXI Express
模拟输入阻抗:50 欧姆
示波器最大带宽:1.5 GHz
最大采样率:5 GS/s
PXIe,1.5 GHz,5 GS/s,10位PXI示波器
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| 373858M-01 | September 2026 |
| 373858L-01 | March 2026 |
| 373858K-01 | January 2025 |
| 373858G-01 | March 2018 |
| 375320A-01 | December 2012 |
| CH 0 and CH 1 | Analog input connection; digitizes data and triggers acquisitions. |
| TRIG | External analog trigger; signals on the TRIG connector cannot be digitized. |
| CLK IN | Imports an external Reference Clock or Sample Clock to the device. |
| CLK OUT | Exports the Reference Clock from the device. |
| PFI 0 | PFI line for digital trigger input/output. |
| PFI 1 | PFI line for digital trigger input/output and probe compensation. No subsample trigger accuracy. |
| CH 0 to CH 3 | Analog input connection; digitizes data and triggers acquisitions. |
| CLK IN | Imports an external Reference Clock or Sample Clock to the device. |
| CLK OUT | Exports the Reference Clock from the device. |
| PFI 0 | PFI line for digital trigger input/output. |
| PFI 1 | PFI line for digital trigger input/output and probe compensation. No subsample trigger accuracy. |
| PXIe-5162 (2 CH) | Two (simultaneously sampled) |
| PXIe-5162 (4 CH) | Four (simultaneously sampled) |
| Input type | Referenced single-ended |
| Connectors | BNC |
| 50 Ω | 50 Ω ± 1.50% |
| 1 MΩ | 1 MΩ ± 0.75% |
| Input capacitance[1] | 15 pF ± 0.8 pF |
| Input coupling | AC, DC |
| 0.05 V | ±0.5 |
| 0.1 V | ±0.5 |
| 0.2 V | ±0.5 |
| 0.5 V | ±0.5 |
| 1 V | ±0.5 |
| 2 V | ±1.5 |
| 5 V | 0 |
| 0.05 V | ±0.5 |
| 0.1 V | ±0.5 |
| 0.2 V | ±0.5 |
| 0.5 V | ±0.5 |
| 1 V | ±0.5 |
| 2 V | ±5 |
| 5 V | ±5 |
| 10 V | ±5 |
| 20 V | ±30 |
| 50 V | ±15 |
| 50 Ω | |Peaks| ≤5 V, nominal |
| 1 MΩ | |Peaks| ≤42 V, nominal |
| Resolution | 10 bits |
| DC accuracy[2] | ±[(2% × |Reading - Vertical Offset|) + (1.4% × |Vertical Offset|) + (0.6% of FS) + 600 µV] |
| DC drift[3] | ±[(0.1% × |Reading - Vertical Offset|) + (0.025% × |Vertical Offset|) + (0.03% of FS)] per °C, nominal |
| AC amplitude accuracy[4] | ±0.5 dB at 50 kHz |
| AC amplitude drift[5] | ±0.01 dB per °C at 50 kHz, nominal |
| 50 Ω | DC ≤ f ≤ 100 MHz |
| 100 MHz < f ≤ 700 MHz | -45 dB |
| 700 MHz < f ≤ 1000 MHz | -40 dB |
| 1 MΩ[7] | DC ≤ f ≤ 100 MHz |
| 100 MHz < f ≤ 200 MHz | -45 dB |
| 50 Ω bandwidth | 1.5 GHz, warranted |
| 1 MΩ[10] | 0.05 V to 1 V |
| 2 V to 10 V | 300 MHz |
| 20 V to 50 V | 300 MHz |
| Bandwidth-limiting filters | 20 MHz and 175 MHz |
| 50 Ω | 320 ps |
| 1 MΩ[14] | 1.4 ns |
| 50 Ω[16] | 170 kHz |
| 1 MΩ | 17 Hz |
| <10 MHz | 0.05 V |
| 0.1 V | 52 dBc |
| 0.2 V | 56 dBc |
| 0.5 V to 5 V | 56 dBc |
| ≥10 MHz to ≤1 GHz | 0.05 V |
| 0.1 V to 5 V | 46 dBc |
| <1 GHz | 0.05 V |
| 0.1 V | 6.6 |
| 0.2 V to 5 V | 7.0 |
| <10 MHz | 0.05 V to 10 V |
| 20 V | 50 dBc |
| ≥10 MHz to ≤100 MHz | 0.05 V to 0.5 V |
| 1 V to 5 V | 48 dBc |
| <10 MHz | 10 V to 20 V |
| ≤100 MHz | 0.05 V |
| 0.1 V | 6.8 |
| 0.2 V to 5 V | 7.1 |
| 50 Ω | 0.05 V |
| 0.1 V | 0.33% of FS |
| 0.2 V to 5 V | 0.28% of FS |
| 1 MΩ | 0.05 V |
| 0.1 V | 0.33% of FS |
| 0.2 V to 50 V | 0.28% of FS |
| 50 Ω to 50 Ω | <25 ps, nominal |
| 1 MΩ to 1 MΩ | <125 ps, nominal |
| 50 Ω to 1 MΩ | <800 ps, nominal |
| Internal | Onboard clock (internal VCO) |
| External | Front panel SMB connector |
| One channel | 76.299 kS/s to 5 GS/s |
| Two channels[30] | 76.299 kS/s to 2.5 GS/s |
| Four channels | 76.299 kS/s to 1.25 GS/s |
| Random interleaved sampling (RIS) range[31] | Up to 100 GS/s |
| Sample Clock jitter[32] | 180 fs RMS (12 kHz to 10 MHz), nominal |
| Timebase frequency | 2.5 GHz |
| Timebase accuracy[33] | ±10 ppm, typical ±25 ppm, warranted |
| Internal | Onboard 10 MHz reference |
| External | External 10 MHz (front panel CLK IN connector) or PXI_CLK10 (backplane connector) |
| Duty cycle tolerance | 45% to 55% |
| Input voltage range, when configured as a Sample Clock | -10 dBm through 16 dBm |
| Maximum input overload, when configured as a Sample Clock | 18 dBm |
| Impedance | 50 Ω |
| Coupling | AC |
| Frequency range | 1.25 GHz to 2.5 GHz[34] |
| Input voltage range, when configured as a Reference Clock | 200 mVpk-pk to 4 Vpk-pk |
| Maximum input overload, when configured as a Reference Clock | 5 Vpk-pk with |Peaks| ≤10 V |
| Impedance | 50 Ω |
| Coupling | AC |
| Frequency range[35] | 10 MHz |
| Output impedance | 50 Ω |
| Logic type | 3.3 V CMOS |
| Maximum current drive | ±10 mA |
| Supported trigger | Reference (Stop) Trigger |
| Trigger types | Edge, Digital, Immediate, Hysteresis, and Software |
| Time-to-digital conversion circuit time resolution | 4 ps |
| Dead time | 710 ns, nominal |
| Holdoff | 6.4 ns to 27.4 s |
| Trigger delay | From 0 to 73,786,976 seconds (28 months), nominal |
| PXIe-5162 (2 CH) | CH 0, CH 1, TRIG, PFI 0, PFI 1, PXI_TRIG <0..6>, and Software |
| PXIe-5162 (4 CH) | CH 0, CH 1, CH 2, CH 3, PFI 0, PFI 1, PXI_TRIG <0..6>, and Software |
| PXIe-5162 (2 CH) | CH 0, CH 1, or TRIG[36] |
| PXIe-5162 (4 CH) | CH 0, CH 1, CH 2, or CH 3 |
| Low-frequency reject | 150 kHz, nominal |
| High-frequency reject | 150 kHz, nominal |
| Trigger sensitivity | 3% of FS at ≤100 MHz, nominal |
| Trigger accuracy[37] | 6% of FS at ≤100 MHz, nominal |
| Trigger jitter | 4.7 ps |
| Connector | BNC |
| Impedance | 50 Ω or 1 MΩ |
| Coupling | AC or DC |
| Trigger sensitivity | 3% of FS at ≤100 MHz, nominal |
| Trigger accuracy[38] | 8% of FS at ≤100 MHz, nominal |
| Trigger jitter | 4.7 ps |
| 50 Ω | ±2.5 V |
| 1 MΩ | ±5 V |
| 50 Ω | |Peaks| ≤5 V, nominal |
| 1 MΩ | |Peaks| ≤42 V, nominal |
| Front panel SMB connector | PFI <0..1> |
| Backplane connector | PXI_TRIG <0..6> |
| Connector | SMB jack |
| Direction | Bidirectional |
| Destinations | Start Trigger (Acquisition Arm) Reference (Stop) Trigger Advance Trigger |
| Input impedance | 10 kΩ |
| VIH | 2.0 V |
| VIL | 0.8 V |
| Maximum input overload | -0.5 V to 5.5 V |
| Maximum frequency | 25 MHz |
| Sources | Ready for Start Start Trigger (Acquisition Arm) Ready for Reference Arm Reference Trigger Reference (Stop) Trigger End of Record Ready for Advance Advance Trigger Done (End of Acquisition) Probe Compensation[40] |
| Output impedance | 50 Ω, nominal |
| Logic type | 3.3 V CMOS |
| Maximum current drive | ±10 mA |
| Maximum frequency | 25 MHz |
| CableSense pulse voltage[41] | 0.5 V, nominal |
| CableSense pulse rise time[42] | 650 ps, nominal |
| Onboard memory size | 1 GB or 2 GB Note Devices with the 154772A-x2L part number had 1 GB of onboard memory. |
| Minimum record length | 1 sample |
| Number of pretrigger samples | Zero up to full record length |
| Number of posttrigger samples | Zero up to full record length |
| Maximum number of records in onboard memory | 100,000 |
| Allocated onboard memory per record | [(Record length + 448 samples) × 2 bytes/sample], rounded up to an integer multiple of 128 bytes (minimum 512 bytes) |
| Interval for external calibration | 2 years |
| Warm-up time | 15 minutes |
| Skew[43] | 100 ps, nominal |
| Skew after manual adjustment | ≤5 ps, nominal |
| Sample clock delay/adjustment resolution | 20 fs |
| +3.3 V DC | 2.2 A, nominal |
| +12 V DC | 2.3 A, nominal |
| Total power | 34.8 W, nominal |
| Dimensions | 3U, 1 slot, PXI Express gen 1 x4 Module21.4 cm × 2.0 cm × 13.1 cm(8.4 in. × 0.8 in. × 5.1 in.) |
| Weight | 430 g (15 oz.) |
| Operating temperature | 0 °C to 45 °C |
| Storage temperature | -40 °C to 71 °C |
| Operating humidity | 10% to 90%, non-condensing |
| Storage humidity | 5% to 95%, non-condensing |
| Pollution Degree | 2 |
| Maximum altitude | 2,000 m (800 mbar) (at 25 °C ambient temperature) |
| Operating vibration | 5 Hz to 500 Hz, 0.3 g RMS |
| Non-operating vibration | 5 Hz to 500 Hz, 2.4 g RMS |
| Operating shock | 30 g, half-sine, 11 ms pulse |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxie-5162-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答