ONETEST 欢迎您

厂商登录 | 入驻

登录 | 注册 购物车 微信公众号
请完成安全验证

类似产品

同厂商产品

USB-5132 50MHz 50MS/s 数字化仪|NI

USB-5132 50MHz 50MS/s 数字化仪|NI (在产)

总线连接:USB 2.0

示波器最大带宽:50 MHz

最大采样率:50 MS/s

模拟输入电压范围:-20 V 至 20 V

50 MHz带宽,2通道,8位USB示波器设备

参考价格 :

厂家:NI (收录356个产品)

产地:美国 奥斯汀

点击访问厂家官网

产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案

USB-5132 779969-02 780468-02 780468-01 50 MHz带宽,2通道,8位USB示波器设备 | NI - onetest仪器资源库

NI
USB-5132 779969-02 780468-02 780468-01 50 MHz带宽,2通道,8位USB示波器设备
总线连接 USB 2.0 · 示波器最大带宽 50 MHz · 最大采样率 50 MS/s
产品简介
USB-5132经济型示波器设备具有两个通道,采样速率高达50 MS/s,提供了灵活的耦合、阻抗、电压范围和滤波设置。
示波器设备还具有多个触发模式和一个包含数据流和分析功能的仪器驱动程序。
该设备是需要灵活测量配置和高达50 MHz模拟带宽的高速便携式和桌面应用的理想选择。
779969-02 780468-02 780468-01 50 MHz带宽,2通道,8位USB示波器设备
核心参数
• 总线连接:USB 2.0
• 示波器最大带宽:50 MHz
• 最大采样率:50 MS/s
• 模拟输入电压范围:-20 V 至 20 V
• 模拟输入分辨率:8 bits
• 电压输入通道数量:2
• 可支持的硬件平台:基于计算机的设备
• 模拟输入耦合:AC-DC
• 模拟输入阻抗:1 MΩ
• 板载数字下变频器:否
资源下载
• USB-5132 779969-02 780468-02 780468-01 50 MHz带宽,2通道,8位USB示波器设备 的全部技术指标已单独整理,见本产品详情页「详细指标」标签。
以上内容与指标均取自NI(NI)官网该产品详情页与官方产品资料,未标注口径的为厂家公布值。
NI · onetest 仪器资源库

 

 

主要技术指标

以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。

Analog Input

Number of channels2, simultaneously sampled
ConnectorBNC

Impedance and Coupling

Input impedance1 MΩ ±1% in parallel with a nominal capacitance of 19 pF
Input couplingAC, DC, GND

Voltage Levels

0.04±0.4
0.1±0.4
0.2±0.4
0.4±0.4
1.0±4.0
2.0±4.0
4.0±4.0
10±25.0
20±20.0
40±10.0
Maximum input overload|Peaks| ≤ 30 V

Accuracy

Resolution8 bits
Accuracy[2]±(2% of input + 1% FS + 300 μV), warranted
DC drift±(0.033% of input + 0.06% of FS + 40 μV) per °C, nominal
AC coupling cutoff (-3 dB)12 Hz

Bandwidth and Transient Response

Bandwidth[3],[4] (-3 dB) All ranges except 0.04 Vpk-pk range 50 MHz, warranted 0.04 Vpk-pk range 35 MHz, warrantedAll ranges except 0.04 Vpk-pk range
All ranges except 0.04 Vpk-pk range50 MHz, warranted
0.04 Vpk-pk range35 MHz, warranted
Bandwidth limit filter20 MHz noise filter
AFrequency response at full bandwidth, all ranges except 40 mVpk-pk range, measured
BFrequency response at full bandwidth, 40 mVpk-pk range, measured
CFrequency response with 20 MHz noise filter, all ranges, measured

Spectral Characteristics

RMS noise All ranges except 0.04 Vpk-pk range 0.35% FS 0.04 Vpk-pk range 0.55% FSAll ranges except 0.04 Vpk-pk range
All ranges except 0.04 Vpk-pk range0.35% FS
0.04 Vpk-pk range0.55% FS

Onboard Clock

Sample rate range, real-time sampling (single shot)[5]763 S/s to 50 MS/s
Timebase frequency50 MHz
Timebase accuracy±50 ppm, warranted

External Sample Clock[6]

SourcesPFI 1
Frequency range1 MHz to 50 MHz
Duty cycle tolerance45% to 55%

Reference (Stop) Trigger

Edge, window, hysteresisCH 0, CH 1
DigitalPFI 1
Immediate, software—

Analog Trigger (Edge, Window, and Hysteresis Trigger Types)

SourcesCH 0 (front panel BNC connector), CH 1 (front panel BNC connector)
Trigger level resolution8 bits
Trigger level rangeSame as input signal

Start Trigger

DigitalPFI 1
Immediate and Software—

PFI 1 (Programmable Function Interface)

ConnectorBNC
DirectionBidirectional

As an Input (Trigger)

DestinationsStart Trigger, Reference Trigger, External Sample Clock
Input impedance1 MΩ , nominal
VIH2.4 V
VIL400 mV
Maximum input overload-0.5 V to 3.5 V
Minimum pulse width20 ns

As an Output (Event)

SourcesReady for Start, Ready for Reference, End of Acquisition (Done)
Output impedance50 Ω
Logic type3.3 V CMOS
Maximum drive current20 mA
Minimum pulse width100 ns

Waveform Specifications

Onboard memory size4 MB per channel option or 32 MB per channel option
Minimum record length1 Sample
Number of pretrigger samples4 MB – posttrigger samples or 32 MB – posttrigger samples
Number of posttrigger samples4 MB – pretrigger samples or 32 MB – pretrigger samples

Calibration

Self-calibrationSelf-calibration is done on software command. The calibration corrects for offset.
External calibration (factory calibration)The external calibration calibrates the gain, the 1 MΩ attenuator, and the programmable vertical offset accuracy. Appropriate constants are stored in nonvolatile memory.
Interval for external calibration2 years
Warm-up time[9]10 minutes

Power

+5 V DC230 mA
Total power1.15 W

Front Panel

CH 0Analog input
CH 1Analog input
PFI 1Digital input/output/clk in

Dimensions and Weight

Dimensions18.49 × 3.38 × 10.29 cm (7.279 × 1.314 × 4.053 in.)
Weight244 g (8.6 oz)

Environment

Maximum altitude2,000 m (at 25 °C ambient temperature)
Pollution Degree2

Operating Environment

Ambient temperature range0 °C to 45 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.)
Relative humidity range10% to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.)

Storage Environment

Ambient temperature range-20 °C to 70 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.)
Relative humidity range10% to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.)

官方规格书:https://www.ni.com/docs/en-US/bundle/usb-5132-specs/page/specs.html

全部

 

NI官方渠道


官方渠道(官网 / 热线 / 邮箱)


官方渠道(中国大陆)


• 官网 www.ni.com/zh-cn


• 在线选购 www.ni.com/zh-cn/shop.html


• 经销商查询

官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html


• 联系方式

NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)


全国办事处


公司总部


• NI(National Instruments)


• 地址

11500 N Mopac Expwy, Austin, TX 78759-3504, United States


• 母公司

Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)


 

0条提问

X

提问

X

回答

暂无视频

 

0条口碑
X

发表口碑

口碑标题
口碑
上传图片

ONETEST仪器资源库

联系电话:+86-755-23033660

电子邮箱:info@onetest.cn

Onetest仪器资源库

公众号

Onetest仪器资源库

视频号

Onetest仪器资源库

bilibili

Onetest仪器资源库

小助手

© 2026 Onetest仪器资源库 All Rights Reserved   粤ICP备17028186号-2      粤公网安备44030902003758

AI问答