ONETEST 欢迎您

厂商登录 | 入驻

登录 | 注册 购物车 微信公众号
请完成安全验证

类似产品

同厂商产品

NI-7935 Kintex-7410T 28620kbit FlexRIO仪器|NI

NI-7935 Kintex-7410T 28620kbit FlexRIO仪器|NI (在产)

FPGA:Kintex-7 410T

块RAM(BRAM):28620 kbit

FPGA片:63550

DSP片:1540

Xilinx Kintex-7 K410T FPGA,FlexRIO控制器

参考价格 :

厂家:NI (收录363个产品)

产地:美国 奥斯汀

点击访问厂家官网

产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案

NI-7935 Xilinx Kintex-7 K410T FPGA,FlexRIO控制器 | NI - onetest仪器资源库

NI
NI-7935 Xilinx Kintex-7 K410T FPGA,FlexRIO控制器
FPGA Kintex-7 410T · 块RAM(BRAM) 28620 kbit · FPGA片 63550
产品简介
NI-7935具有可编程的FPGA和嵌入式处理器,其适用于现场部署版,为需要高级I/O功能以及嵌入式信号处理的应用程序提供了可靠的长时间运行。
它包含Xilinx Kintex-7 K410T FPGA、2 GB板载DDR3 DRAM、一个运行NI Linux Real-Time的双核ARM Cortex-A9处理器和2个用于数据流的SFP+端口。
The registered trademark Linux® is used pursuant to a sublicense from LMI,
the exclusive licensee of Linus Torvalds, owner of the mark on a worldwide basis.
Xilinx Kintex-7 K410T FPGA,FlexRIO控制器
核心参数
• FPGA:Kintex-7 410T
• 块RAM(BRAM):28620 kbit
• FPGA片:63550
• DSP片:1540
• 高速串行连接:SFP+
• 产品描述:NI 7935R FlexRIO控制器(Kintex-7 K410T,SFP+)
资源下载
• NI-7935 Xilinx Kintex-7 K410T FPGA,FlexRIO控制器 的全部技术指标已单独整理,见本产品详情页「详细指标」标签。
以上内容与指标均取自NI(NI)官网该产品详情页与官方产品资料,未标注口径的为厂家公布值。
NI · onetest 仪器资源库

 

 

主要技术指标

以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。

FlexRIO Documentation

Getting started guide for your Controller for FlexRIOAvailable from the Start menu and at ni.com/manuals.
Specifications document for your Controller for FlexRIOAvailable from the Start menu and at ni.com/manuals.
Getting started guide for your adapter moduleAvailable from the Start menu and at ni.com/manuals.
Specifications document for your adapter moduleAvailable from the Start menu and at ni.com/manuals.
LabVIEW FPGA Module HelpEmbedded in LabVIEW Help and at ni.com/manuals.
Real-Time Module HelpEmbedded in LabVIEW Help and at ni.com/manuals.
FlexRIO HelpAvailable from the Start menu and at ni.com/manuals.
LabVIEW ExamplesAvailable in NI Example Finder. In LabVIEW, click Help » Find Examples » Hardware Input and Output » FlexRIO.
IPNetLocated at ni.com/ipnet.
FlexRIO product pageLocated at ni.com/flexrio.

Processor

TypeXilinx Zynq-7020, XC7Z020 All Programmable SoC, CLG484
ArchitectureARM Cortex-A9
Speed667 MHz
Cores2
Real-time clock accuracy5 ppm
Operating systemNI Linux Real-Time (32-bit)
Nonvolatile memory512 MB [1], SLC NAND Flash
Volatile memory (DRAM)512 MB, DDR3
Flash reboot endurance100,000 cycles [2]

CMOS Battery

Typical battery life with power applied to power connector10 years
Typical battery life in storage up to 70 °C10 years

General Characteristics

Clock distribution part numberAD9511[3]; clock distribution
Oscillator typeVCXO
Oscillator modelEpson Toyocom TCO–2121U2
Frequency100 MHz [4]
Frequency pull range± 100 ppm

Typical Specifications

Frequency stability Temperature ±30 ppm over the operating temperature range Aging ±5 ppm per yearTemperature
Temperature±30 ppm over the operating temperature range
Aging±5 ppm per year

Network/Ethernet Port

Number of ports1
Network interface10Base-T, 100Base-TX, and 1000Base-T Ethernet
CompatibilityIEEE 802.3
Communication rates10 Mbps, 100 Mbps, 1000 Mbps auto-negotiated, half/full-duplex
Maximum cabling distance100 m/segment

USB Ports

Number of ports USB device port 1 standard micro-B connector USB host port 1 standard A connectorUSB device port
USB device port1 standard micro-B connector
USB host port1 standard A connector
USB interfaceUSB 2.0, Hi-Speed
Maximum data rate480 Mb/s per port
Maximum current (USB Host Port)1 A

SD Card Slot

Form factorMicroSD
SD card supportSD and SDHC standards
Non-volatile memory[5]Up to 32 GB[6]

REF IN

Number of channels1, single-ended
Connector typeSMA
Frequency10 MHz
Input impedance50 Ω
Input couplingAC
Input voltage range0.75 Vpk-pk to 5.2 Vpk-pk
Absolute maximum voltage±8.0 VDC, 8.0 Vpk-pk AC
Duty cycle40% to 60%

TRIG General Characteristics

Number of channels1, single-ended
Connector typeSMA
CouplingDC
Impedance Input 10 kΩ Output 50 ΩInput
Input10 kΩ
Output50 Ω
Logic level3.3V CMOS
Voltage VIH_MIN 2 V VIL_MAX 0.8 V VOH_MIN (unloaded) 3.1 V VOL_MAX (unloaded) 0.2 VVIH_MIN
VIH_MIN2 V
VIL_MAX0.8 V
VOH_MIN (unloaded)3.1 V
VOL_MAX (unloaded)0.2 V
Absolute maximum voltage±20 VDC, +21 dBm (7.1 Vpk-pk)
Current IOH_MAX 12 mA IOL_MAX -12 mAIOH_MAX
IOH_MAX12 mA
IOL_MAX-12 mA

High Speed Serial Ports

Data rate10.3125 Gbps, 6.25 Gbps, 3.125 Gbps
Connector typeSFP+
Number of TX channels2
Number of RX channels2
Supported high speed cable type[7]Electrical/optical
Optical cable power3.3 V ± 5%, 500 mA per port, characteristic

Non-volatile Storage

Non-volatile memory SD removable (user supplied) Up to 32 GB[8] System memory 512 MBSD removable (user supplied)
SD removable (user supplied)Up to 32 GB[8]
System memory512 MB

Reconfigurable FPGA

FPGAKintex-7 XC7K410T
LUTs254,200
DSP48 Slices (25 × 18 multiplier)1,540
Embedded Block RAM (kbits)28,620
Default timebase40 MHz
Timebase accuracy±100 ppm, 250 ps peak-to-peak jitter
Data transfersDMA, interrupts, programmed I/O
Number of DMA channels16

FPGA Digital Input/Output

Number of general-purpose channels136, configurable as 136 single-ended, 68 differential, or a combination of both[9]
Channels per bank Bank 0/Bank 1 48 Bank 2 40Bank 0/Bank 1
Bank 0/Bank 148
Bank 240
CompatibilityConfigured through the FPGA and based on the attached adapter module; 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V I/O standards (refer to xilinx.com).
ProtectionRefer to xilinx.com.
CurrentRefer to xilinx.com.
Maximum I/O data rates Single-ended 400 Mb/s Differential 1 Gb/s for LVDSSingle-ended
Single-ended400 Mb/s
Differential1 Gb/s for LVDS
Multi-region clock inputs6
Single-region clock inputs5
Connection resourcesSMA connector (TRIGGER and REF CLK)

FPGA-Accessible DRAM

Memory size2 GB
Theoretical maximum data rate10.5 GB/s

Power Requirements

Voltage input range9 V to 30 V (measured at the NI-7935 power connector)
Maximum power consumption[10]60 W
Typical standby power consumption11.4 W
Recommended power supply>75 W, 12 VDC
EMC ratings for power input as described in IEC 61000Short lines, long lines, and DC distributed networks
Power input connector Power receptacle Weidmuller OMNIMATE Signal, S2C-SMT 3.50/04/90LF 1.8AU BK BX, part number 1993840000 Power plug Weidmuller OMNIMATE Signal, B2CF 3.50/04/180F AU BK BX, part number 1993830000Power receptacle
Power receptacleWeidmuller OMNIMATE Signal, S2C-SMT 3.50/04/90LF 1.8AU BK BX, part number 1993840000
Power plugWeidmuller OMNIMATE Signal, B2CF 3.50/04/180F AU BK BX, part number 1993830000

Physical

Dimensions (not including connectors)23.4 cm × 13.1 cm × 4.4 cm (9.21 in. × 5.14 in. × 1.73 in.)
Weight1,170 g (41.27 oz.)

Safety Voltages

Positive terminal to negative terminal30 VDC maximum, Measurement Category I
Channel-to-earth0 V to 3.3 V, Measurement Category I
Channel-to-channel0 V to 3.3 V, Measurement Category I

Environment

Maximum altitude2,000 m (800 mbar) (at 25 °C ambient temperature)
Pollution Degree2

Operating Environment

Ambient temperature range0 °C to 55 °C
Relative humidity range10% to 90%, noncondensing

Storage Environment

Ambient temperature range-40 °C to 71 °C
Relative humidity range5% to 95%, noncondensing

Shock and Vibration

Operating shock30 g peak, half-sine, 11 ms pulse
Random vibration Operating 5 Hz to 500 Hz, 0.3 g RMS Nonoperating 5 Hz to 500 Hz, 2.4 g RMSOperating
Operating5 Hz to 500 Hz, 0.3 g RMS
Nonoperating5 Hz to 500 Hz, 2.4 g RMS

官方规格书:https://www.ni.com/docs/en-US/bundle/ni-7935-specs/page/specs.html

全部

 

NI官方渠道


官方渠道(官网 / 热线 / 邮箱)


官方渠道(中国大陆)


• 官网 www.ni.com/zh-cn


• 在线选购 www.ni.com/zh-cn/shop.html


• 经销商查询

官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html


• 联系方式

NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)


全国办事处


公司总部


• NI(National Instruments)


• 地址

11500 N Mopac Expwy, Austin, TX 78759-3504, United States


• 母公司

Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)


 

0条提问

X

提问

X

回答

暂无视频

 

0条口碑
X

发表口碑

口碑标题
口碑
上传图片

ONETEST仪器资源库

联系电话:+86-755-23033660

电子邮箱:info@onetest.cn

Onetest仪器资源库

公众号

Onetest仪器资源库

视频号

Onetest仪器资源库

bilibili

Onetest仪器资源库

小助手

© 2026 Onetest仪器资源库 All Rights Reserved   粤ICP备17028186号-2      粤公网安备44030902003758

AI问答