模拟输出分辨率:12 bits
最大采样率:6.4 GS/s
模拟输入分辨率:12 bits
模拟输出通道数量:2
12位,6.4 GS/s,2通道FlexRIO IF收发仪设备
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
模拟输出分辨率:12 bits
最大采样率:6.4 GS/s
模拟输入分辨率:12 bits
模拟输出通道数量:2
12位,6.4 GS/s,2通道FlexRIO IF收发仪设备
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| Connector | Molex™ Nano-Pitch I/O™ |
| 5.0 V Power | ±5%, 50 mA maximum, nominal |
| MGT Tx± <0..3>[1] | Xilinx UltraScale GTH |
| MGT Rx± <0..3>[1] | Xilinx UltraScale GTH |
| DIO <0..7> | Single-ended |
| 5.0 V | DC |
| GND | Ground |
| Number of channels | 8 |
| Signal type | Single-ended |
| Voltage families | 3.3 V, 2.5 V, 1.8 V, 1.5 V, 1.2 V |
| Input impedance | 100 kΩ, nominal |
| Output impedance | 50 Ω, nominal |
| Direction control | Per channel |
| Minimum required direction change latency | 200 ns |
| Maximum output toggle rate | 60 MHz with 100 μA load, nominal |
| 3.3 | 0.8 |
| 2.5 | 0.7 |
| 1.8 | 0.62 |
| 1.5 | 0.51 |
| 1.2 | 0.42 |
| Data rate | 500 Mbps to 16.375 Gbps, nominal |
| Number of Tx channels | 4 |
| Number of Rx channels | 4 |
| I/O AC coupling capacitor | 100 nF |
| Minimum differential output voltage[5] | 170 mV pk-pk into 100 Ω, nominal |
| I/O coupling | AC-coupled, includes 100 nF capacitor |
| Differential input voltage range ≤ 6.6 Gb/s 150 mV pk-pk to 2000 mV pk-pk, nominal > 6.6 Gb/s 150 mV pk-pk to 1250 mV pk-pk, nominal | ≤ 6.6 Gb/s |
| ≤ 6.6 Gb/s | 150 mV pk-pk to 2000 mV pk-pk, nominal |
| > 6.6 Gb/s | 150 mV pk-pk to 1250 mV pk-pk, nominal |
| Differential input resistance | 100 Ω, nominal |
| I/O coupling | DC-coupled, requires external capacitor |
| LUTs | 203,128 |
| DSP48 slices (25 × 18 multiplier) | 1,700 |
| Embedded Block RAM | 19.0 Mb |
| Data Clock Domain | 200 MHz, 16 samples per cycle per channel (dual channel mode), 32 samples per cycle (single channel mode) |
| Timebase reference sources | Onboard 100 MHz oscillator |
| Data transfers | DMA, interrupts, programmed I/O |
| Number of DMA channels | 59 |
| Memory size | 4 GB (2 banks of 2 GB) |
| DRAM clock rate | 1064 MHz |
| Physical bus width | 32 bit |
| LabVIEW FPGA DRAM clock rate | 267 MHz |
| LabVIEW FPGA DRAM bus width | 256 bit per bank |
| Maximum theoretical data rate | 17 GB/s (8.5 GB/s per bank) |
| Number of channels | 2, single-ended, simultaneously sampled |
| Connector type | SMA |
| Input impedance | 50 Ω |
| Input coupling | AC |
| Sample Clock Internal Sample Clock 3.2 GHz External Sample Clock 2.8 GHz to 3.2 GHz | Internal Sample Clock |
| Internal Sample Clock | 3.2 GHz |
| External Sample Clock | 2.8 GHz to 3.2 GHz |
| Sample Rate Dual channel mode 3.2 GS/s per channel Single channel mode 6.4 GS/s | Dual channel mode |
| Dual channel mode | 3.2 GS/s per channel |
| Single channel mode | 6.4 GS/s |
| Analog-to-digital converter (ADC) | ADC12DJ3200, 12-bit resolution |
| Input latency[6] | 239 ns |
| Full-scale input range | 1.25 V pk-pk (5.92 dBm) at 10 MHz |
| AC gain accuracy | ±0.11 dB at 10 MHz |
| DC offset | ±2.19 mV |
| Bandwidth (-3 dB)[7] | 500 kHz to 6 GHz |
| SNR[] (dBFS) | 56.0 |
| SINAD[] (dBFS) | 55.5 |
| SFDR (dBc) | -64.9 |
| ENOB[] (bits) | 8.9 |
| SNR[] (dBFS) | 54.6 |
| SINAD[] (dBFS) | 54.4 |
| SFDR (dBc) | -61.7 |
| ENOB[] (bits) | 8.7 |
| Dual channel | 14.4 |
| Single channel | 9.8 |
| Channel-to-channel crosstalk, measured 99.9 MHz -92.5 dB 399 MHz -85.5 dB 999 MHz -76.5 dB 1.999 GHz -68.8 dB 2.499 GHz -67.4 dB | 99.9 MHz |
| 99.9 MHz | -92.5 dB |
| 399 MHz | -85.5 dB |
| 999 MHz | -76.5 dB |
| 1.999 GHz | -68.8 dB |
| 2.499 GHz | -67.4 dB |
| Number of channels | 2, single-ended, simultaneously updated |
| Connector type | SMA |
| Output impedance | 50 Ω |
| Output coupling | AC |
| Update rate Internal Sample Clock, 2x interpolation 6.4 GS/s External Sample Clock, 2x interpolation 6.4 GS/s [12] | Internal Sample Clock, 2x interpolation |
| Internal Sample Clock, 2x interpolation | 6.4 GS/s |
| External Sample Clock, 2x interpolation | 6.4 GS/s [12] |
| Data rate (per channel) Dual channel mode 3.2 GS/s, real Single channel mode 3.2 GS/s, complex | Dual channel mode |
| Dual channel mode | 3.2 GS/s, real |
| Single channel mode | 3.2 GS/s, complex |
| Digital-to-analog converter (DAC) | DAC38RF82, 12-bit resolution |
| Output latency[13] DUC disabled 211 ns DUC enabled 221 ns | DUC disabled |
| DUC disabled | 211 ns |
| DUC enabled | 221 ns |
| Full-scale output power[14] Dual Channel Mode 2.85 dBm (878 mVpp) Single Channel Mode -3.33 dBm (431 mVpp) | Dual Channel Mode |
| Dual Channel Mode | 2.85 dBm (878 mVpp) |
| Single Channel Mode | -3.33 dBm (431 mVpp) |
| Bandwidth (-3 dB)[15] Dual Channel Mode 3 MHz to 1.53 GHz Single Channel Mode (no anti-image filter) 60 MHz to 2.85 GHz Single Channel Mode (with anti-image filter) 60 MHz to 2.35 GHz | Dual Channel Mode |
| Dual Channel Mode | 3 MHz to 1.53 GHz |
| Single Channel Mode (no anti-image filter) | 60 MHz to 2.85 GHz |
| Single Channel Mode (with anti-image filter) | 60 MHz to 2.35 GHz |
| 2nd HD (dBc) | -67.8 |
| 3rd HD (dBc) | -63.0 |
| SFDR (dBc) | -63.0 |
| 2nd HD (dBc) | -62.4 |
| 3rd HD (dBc) | -67.3 |
| SFDR (dBc) | -62.4 |
| IMD3 (dBc) | -73.9 |
| Dual Channel | 1.18 |
| Single Channel | 0.941 |
| Channel-to-channel crosstalk, measured[20] 100 MHz -82 dBc 500 MHz -91 dBc 1.0 GHz -90 dBc 1.5 GHz -88 dBc 2.0 GHz -82 dBc 2.5 GHz -82 dBc | 100 MHz |
| 100 MHz | -82 dBc |
| 500 MHz | -91 dBc |
| 1.0 GHz | -90 dBc |
| 1.5 GHz | -88 dBc |
| 2.0 GHz | -82 dBc |
| 2.5 GHz | -82 dBc |
| Connector type | SMA |
| Input impedance | 50 Ω |
| Input coupling | AC |
| Input voltage range | 0.35 V pk-pk to 3.5 V pk-pk, nominal |
| Absolute maximum voltage | ±12 V DC, 4 V pk-pk AC |
| Duty cycle | 45% to 55% |
| Sample Clock jitter Analog input 86.8 fsrms, measured[23] Analog output 198.8 fsrms, measured[24] | Analog input |
| Analog input | 86.8 fsrms, measured[23] |
| Analog output | 198.8 fsrms, measured[24] |
| Internal Baseboard Reference Clock[25] | 10 MHz |
| External Reference Clock (REF/CLK IN) | 10 MHz [26] |
| External Sample Clock (REF/CLK IN) | 2.8 GHz to 3.2 GHz |
| Card edge form factor | PCI Express Gen-3 x8 |
| Slot compatibility | x8 and x16 PCI Express slots |
| +3.3 V | 4.5 A |
| +12 V | 5 A |
| Maximum total power | 75 W |
| Dimensions (including I/O bracket, not including connectors) | 12.6 cm × 26.3 cm × 4 cm (5.0 in. × 10.4 in. × 1.6 in.) |
| Weight | 990 g (35 oz) |
| PCI Express mechanical form factor | Standard height, three-quarter length, double slot |
| Integrated air mover (fan) | Yes |
| Maximum rear panel exhaust airflow | 84 m3/h (50 CFM) (without any chassis impedance) |
| Maximum altitude | 2,000 m (800 mbar) (at 25 °C ambient temperature) |
| Pollution degree | 2 |
| Operating temperature, local[27] | 0 °C to 45 °C |
| Operating humidity | 10% to 90% RH, noncondensing |
| Ambient temperature range | -20 °C to 70 °C |
| Relative humidity range | 5% to 95% RH, noncondensing |
官方规格书:https://www.ni.com/docs/en-US/bundle/pcie-5785-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答