模拟输入带宽:225 MHz
最大采样率:500 MS/s
模拟输入分辨率:16 bits
模拟输入电压范围:-1 V 至 1 V
16 位,500 MS/s,4通道PXI FlexRIO数字化仪
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
模拟输入带宽:225 MHz
最大采样率:500 MS/s
模拟输入分辨率:16 bits
模拟输入电压范围:-1 V 至 1 V
16 位,500 MS/s,4通道PXI FlexRIO数字化仪
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| MGT Tx± <0..3> | Xilinx UltraScale GTH |
| MGT Rx± <0..3> | Xilinx UltraScale GTH |
| DIO <0..7> | Single-ended |
| 5.0 V | DC |
| GND | Ground |
| Connector | Molex™ Nano-Pitch I/O™ |
| 5.0 V Power | ±5%, 50 mA maximum, nominal |
| MGT Tx± <3..0>* | Xilinx UltraScale GTH |
| MGT Rx± <3..0>* | Xilinx UltraScale GTH |
| DIO <7..0> | Single-ended |
| 5.0 V | DC |
| GND | Ground |
| Number of channels | 8 |
| Signal type | Single-ended |
| Voltage families | 3.3 V, 2.5 V, 1.8 V, 1.5 V, 1.2 V |
| Input impedance | 100 kΩ, nominal |
| Output impedance | 50 Ω, nominal |
| Direction control | Per channel |
| Minimum required direction change latency | 200 ns |
| Maximum output toggle rate | 60 MHz with 100 μA load, nominal |
| 3.3 | 0.8 |
| 2.5 | 0.7 |
| 1.8 | 0.62 |
| 1.5 | 0.51 |
| 1.2 | 0.42 |
| Data rate | 500 Mb/s to 16.375 Gb/s, nominal |
| Number of Tx channels | 4 |
| Number of Rx channels | 4 |
| I/O AC coupling capacitor | 100 nF |
| Minimum differential output voltage[2] | 170 mV peak-to-peak into 100 Ω, nominal |
| I/O coupling | AC-coupled, includes 100 nF capacitor |
| Differential input voltage range ≤ 6.6 Gb/s 150 mV peak-to-peak to 2000 mV peak-to-peak, nominal > 6.6 Gb/s 150 mV peak-to-peak to 1250 mV peak-to-peak, nominal | ≤ 6.6 Gb/s |
| ≤ 6.6 Gb/s | 150 mV peak-to-peak to 2000 mV peak-to-peak, nominal |
| > 6.6 Gb/s | 150 mV peak-to-peak to 1250 mV peak-to-peak, nominal |
| Differential input resistance | 100 Ω, nominal |
| I/O coupling | DC-coupled, requires external capacitor |
| LUTs | 203,128 |
| DSP48 slices (25 × 18 multiplier) | 1,700 |
| Embedded Block RAM | 19.0 Mb |
| Default timebase | 80 MHz |
| Timebase reference sources | PXI Express 100 MHz (PXIe_CLK100) |
| Data transfers | DMA, interrupts, programmed I/O |
| Number of DMA channels | 59 |
| Memory size | 4 GB (2 banks of 2 GB) |
| DRAM clock rate | 1064 MHz |
| Physical bus width | 32 bit |
| LabVIEW FPGA DRAM clock rate | 267 MHz |
| LabVIEW FPGA DRAM bus width | 256 bit per bank |
| Maximum theoretical data rate | 17 GB/s (8.5 GB/s per bank) |
| Number of channels | 4, single-ended, simultaneously sampled |
| Connector type | SMA |
| Input impedance | 50 Ω |
| Input coupling | AC or DC[3] |
| Sample Rate Internal Sample Clock 500 MHz External Sample Clock 500 MHz [4] | Internal Sample Clock |
| Internal Sample Clock | 500 MHz |
| External Sample Clock | 500 MHz [4] |
| Analog-to-digital converter (ADC) | ADS54J69, 16-bit resolution |
| Full-scale input range (normal operating conditions) AC-coupled 2.03 Vpp (10.15 dBm) at 10 MHz DC-coupled 1.97 Vpp (9.87 dBm) | AC-coupled |
| AC-coupled | 2.03 Vpp (10.15 dBm) at 10 MHz |
| DC-coupled | 1.97 Vpp (9.87 dBm) |
| Gain accuracy AC-coupled ±0.1 dB at 10 MHz DC-coupled ±1% at DC | AC-coupled |
| AC-coupled | ±0.1 dB at 10 MHz |
| DC-coupled | ±1% at DC |
| DC Offset AC-coupled ±41 µV DC-coupled ±225 µV | AC-coupled |
| AC-coupled | ±41 µV |
| DC-coupled | ±225 µV |
| Bandwidth (-3 dB)[5] AC-coupled 0.07 MHz to 225 MHz DC-coupled DC to 225 MHz[6] | AC-coupled |
| AC-coupled | 0.07 MHz to 225 MHz |
| DC-coupled | DC to 225 MHz[6] |
| SNR* (dBFS) | 73.7 |
| SINAD* (dBFS) | 73.5 |
| SFDR (dBc) | -85.6 |
| ENOB† (bits) | 11.9 |
| AC-coupled | 9.5 |
| DC-coupled | 11.8 |
| Channel-to-channel crosstalk AC-coupled, characteristic 10 MHz -87 dB 100 MHz -89 dB 225 MHz -85 dB | 10 MHz |
| 10 MHz | -87 dB |
| 100 MHz | -89 dB |
| 225 MHz | -85 dB |
| Channel-to-channel crosstalk DC-coupled, characteristic 1 MHz -94 dB 100 MHz -83 dB 225 MHz -78 dB | 1 MHz |
| 1 MHz | -94 dB |
| 100 MHz | -83 dB |
| 225 MHz | -78 dB |
| Connector type | SMA |
| Input impedance | 50 Ω |
| Input coupling | AC |
| Reference input voltage range | 0.3 Vpp to 4 Vpp |
| Sample Clock input voltage range | 0.3 Vpp to 4 Vpp |
| Absolute maximum voltage | ±12 V DC, 4 Vpp AC |
| Duty cycle | 45% to 55% |
| Onboard reference timebase stability | ±0.7 ppm |
| Sample Clock jitter[7] AC-coupled 135 fs RMS DC-coupled 142 fs RMS | AC-coupled |
| AC-coupled | 135 fs RMS |
| DC-coupled | 142 fs RMS |
| Internal Reference Clock* | — |
| Internal PXI_CLK10 | — |
| External Reference Clock (CLK/REF IN) | Reference Clock |
| External Sample Clock (CLK/REF IN) | Sample Clock |
| +3.3 V | 3 A |
| +12 V | 4 A |
| Maximum total power | 58 W |
| Dimensions (not including connectors) | 2.0 cm × 13.0 cm × 21.6 cm(0.8 in. × 5.1 in. × 8.5 in.) |
| Weight | 500 g (17.6 oz) |
| Maximum altitude | 2,000 m (800 mbar) (at 25 °C ambient temperature) |
| Pollution Degree | 2 |
| Ambient temperature range | 0 °C to 55 °C[8] |
| Relative humidity range | 10% to 90%, noncondensing |
| Ambient temperature range | -40 °C to 71 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2. Meets MIL-PRF-28800F Class 4 limits.) |
| Relative humidity range | 5% to 95%, noncondensing (Tested in accordance with IEC 60068-2-56.) |
| Skew[9] AC-coupled 130 ps, measured DC-coupled 140 ps, measured | AC-coupled |
| AC-coupled | 130 ps, measured |
| DC-coupled | 140 ps, measured |
| Skew after manual adjustment | ≤10 ps, measured |
| Sample Clock delay/adjustment | 1.5 ps |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxie-5763-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答