列数:136
交叉点:544
扫描速率:50000 周期/秒
总线连接器:PXI混合
544个交叉点,1线PXI矩阵开关模块
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
列数:136
交叉点:544
扫描速率:50000 周期/秒
总线连接器:PXI混合
544个交叉点,1线PXI矩阵开关模块
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| 1 | Columns 0:67 connector |
| 2 | Columns 68:135 connector |
| 3 | Rows 0:3 IN connector |
| 4 | Rows 0:3 OUT connector |
| Rx | Row connection |
| — | No connection |
| Rx | Row output for column expansion |
| RSVD | Reserved, do not connect |
| — | No connection |
| Maximum switching voltage (channel-to-ground) | ±12 VDC, 8 VAC |
| Maximum switching power (per channel, resistive) | 1.2 W |
| Maximum switching current | 100 mA |
| DC isolation resistance (between open terminals) | >1 GΩ, typical at 23 °C >334 MΩ, typical at 55 °C |
| Current leakage between column and ground (closed path) | 10 nA, typical (12 VDC applied at 25 °C) |
| Offset voltage | 10 µV, typical |
| Overvoltage protection Powered on ±36 VDC Powered off ±40 VDC | Powered on |
| Powered on | ±36 VDC |
| Powered off | ±40 VDC |
| Total path resistance, row-to-column Typical 9 Ω Maximum 14 Ω | Typical |
| Typical | 9 Ω |
| Maximum | 14 Ω |
| Single crosspoint bandwidth (50 Ω system, one row to one column) | >1 MHz, typical |
| Crosstalk (50 Ω system) 10 kHz <-53 dB, typical 100 kHz <-33 dB, typical 1 MHz <-30 dB , typical | 10 kHz |
| 10 kHz | <-53 dB, typical |
| 100 kHz | <-33 dB, typical |
| 1 MHz | <-30 dB , typical |
| FET operate time[1] Typical 12 µs Maximum 16 µs | Typical |
| Typical | 12 µs |
| Maximum | 16 µs |
| Maximum scan rate | 50,000 crosspoints/s |
| Simultaneous drive limit | 544 switches |
| Expected relay life | Unlimited, when operated within specified limits |
| Chassis power-up charge injection Row 9.7 μC (<500 μA for a 20 ms time interval, typical) Column 0.7 μC (<40 μA for a 20 ms time interval, typical) | Row |
| Row | 9.7 μC (<500 μA for a 20 ms time interval, typical) |
| Column | 0.7 μC (<40 μA for a 20 ms time interval, typical) |
| Input trigger Sources PXI trigger lines <0…7> Minimum pulse width 70 ns | Sources |
| Sources | PXI trigger lines <0…7> |
| Minimum pulse width | 70 ns |
| Output trigger Destinations PXI trigger lines <0…7> Default pulse width 2 µs, typical | Destinations |
| Destinations | PXI trigger lines <0…7> |
| Default pulse width | 2 µs, typical |
| Relay type | FET switch |
| I/O connector | Four 68-pin receptacle VHDCI |
| Power requirement 3.3 V 1.7 W, typical 12 V 1.3 W, typical | 3.3 V |
| 3.3 V | 1.7 W, typical |
| 12 V | 1.3 W, typical |
| Dimensions (L × W × H) | 3U, one slot, PXI/cPCI module 21.6 × 2.0 × 13.0 cm (8.5 × 0.8 × 5.1 in.) |
| Weight | 159 g (5.6 oz) |
| Operating temperature | 0 °C to 55 °C |
| Storage temperature | -40 °C to 70 °C |
| Relative humidity | 5% to 85%, noncondensing |
| Pollution Degree | 2 |
| Maximum altitude | 2,000 m |
| Operational Shock | 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Test profile developed in accordance with MIL-PRF-28800F.) |
| Random vibration, operating | 5 Hz to 500 Hz, 0.3 grms |
| Random vibration, nonoperating | 5 Hz to 500 Hz, 2.4 grms (Tested in accordance with IEC 60068-2-64. Nonoperating test profile exceeds the requirements of MIL-PRF-28800F, Class 3.) |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxi-2535-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答