扫描速率:115 周期/秒
总线连接:PXI混合
最大直流切换电流:2 A
继电器配置:SPDT
16通道,2 A,SPDT PXI继电器模块
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
扫描速率:115 周期/秒
总线连接:PXI混合
最大直流切换电流:2 A
继电器配置:SPDT
16通道,2 A,SPDT PXI继电器模块
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| COMxW0 | Wire 0 routing destination for corresponding signal connections |
| COMxW1 | Wire 1 routing destination for corresponding signal connections |
| GND | Ground connection |
| NCxW0 | Wire 0 for normally closed signal connection |
| NCxW1 | Wire 1 for normally closed signal connection |
| NOxW0 | Wire 0 for normally open signal connection |
| NOxW1 | Wire 1 for normally open signal connection |
| RSVD | Reserved, do not connect |
| TRIG IN | Trigger input connection |
| TRIG OUT | Trigger output connection |
| COMx | Routing destination for corresponding signal connections |
| GND | Ground connection |
| NCx | Normally closed signal connection |
| NOx | Normally open signal connection |
| RSVD | Reserved, do not connect |
| TRIG IN | Trigger input connection |
| TRIG OUT | Trigger output connection |
| Maximum switching voltage[1] Channel-to-channel 150 V DC, 125 V AC Channel-to-ground 150 V DC, 125 V AC, CAT I[2] | Channel-to-channel |
| Channel-to-channel | 150 V DC, 125 V AC |
| Channel-to-ground | 150 V DC, 125 V AC, CAT I[2] |
| Maximum switching power (per channel) | 60 W, 62.5 VA (DC to 60 Hz) |
| Maximum switching current (per channel) | 2 A DC, 2 A AC |
| Simultaneous channels at maximum switching current (≤25 °C) | 16 |
| Maximum carry current (per channel) | 5 A DC, 5 A AC |
| Simultaneous channels at maximum carry current (≤25 °C) | 9 |
| DC path resistance[3] Initial <0.1 Ω, warranted Initial, with TB-2666[4] <0.19 Ω, warranted End of life ≥1.0 Ω | Initial |
| Initial | <0.1 Ω, warranted |
| Initial, with TB-2666[4] | <0.19 Ω, warranted |
| End of life | ≥1.0 Ω |
| DC isolation Open channel, with TB-2666[4] 100 GΩ, typical Channel-to-channel, with TB-2666[4] 100 GΩ, typical | Open channel, with TB-2666[4] |
| Open channel, with TB-2666[4] | 100 GΩ, typical |
| Channel-to-channel, with TB-2666[4] | 100 GΩ, typical |
| Thermal EMF | <13 μV, typical |
| Minimum switching capacity | 10 μA at 10 mV DC |
| Bandwidth (-3 dB, 50 Ω system) | ≥70 MHz, typical |
| Bandwidth with TB-2666 (-3 dB, 50 Ω system)[4] | ≥10 MHz, typical |
| Crosstalk (50 Ω system) Channel-to-channel 10 kHz ≤-75 dB, typical 100 kHz ≤-65 dB, typical 1 MHz ≤-45 dB, typical | Channel-to-channel 10 kHz ≤-75 dB, typical 100 kHz ≤-65 dB, typical 1 MHz ≤-45 dB, typical |
| Channel-to-channel 10 kHz ≤-75 dB, typical 100 kHz ≤-65 dB, typical 1 MHz ≤-45 dB, typical | 10 kHz |
| 10 kHz | ≤-75 dB, typical |
| 100 kHz | ≤-65 dB, typical |
| 1 MHz | ≤-45 dB, typical |
| Relay operate time[5] | 2 ms, typical 4.4 ms, maximum |
| Maximum cycle speed | 115 cycles/s |
| Expected relay life[6] Mechanical 1 × 108 cycles Electrical 30 V DC, 1 A DC resistive 5 × 105 cycles 30 V DC, 2 A DC resistive 1 × 105 cycles 125 V AC, 0.2 A AC resistive 3 × 105 cycles 125 V AC, 0.5 A AC resistive 1 × 105 cycles | Mechanical |
| Mechanical | 1 × 108 cycles |
| Electrical 30 V DC, 1 A DC resistive 5 × 105 cycles 30 V DC, 2 A DC resistive 1 × 105 cycles 125 V AC, 0.2 A AC resistive 3 × 105 cycles 125 V AC, 0.5 A AC resistive 1 × 105 cycles | 30 V DC, 1 A DC resistive |
| 30 V DC, 1 A DC resistive | 5 × 105 cycles |
| 30 V DC, 2 A DC resistive | 1 × 105 cycles |
| 125 V AC, 0.2 A AC resistive | 3 × 105 cycles |
| 125 V AC, 0.5 A AC resistive | 1 × 105 cycles |
| Input trigger Sources PXI trigger lines <0...7> Minimum pulse width[7] 150 ns Front panel/terminal block input voltage -0.5 V, minimum +0.7 V, VL maximum +2.0 V, VH minimum +3.3 V, nominal +5.5 V, maximum | Sources |
| Sources | PXI trigger lines <0...7> |
| Minimum pulse width[7] | 150 ns |
| Front panel/terminal block input voltage | -0.5 V, minimum +0.7 V, VL maximum +2.0 V, VH minimum +3.3 V, nominal +5.5 V, maximum |
| Output trigger Destinations PXI trigger lines <0...7> Default pulse width 2 µs, typical Front panel voltage 3.3 V TTL, 8 mA, nominal | Destinations |
| Destinations | PXI trigger lines <0...7> |
| Default pulse width | 2 µs, typical |
| Front panel voltage | 3.3 V TTL, 8 mA, nominal |
| Relay type | Electromechanical, nonlatching |
| Relay contact material[8] | Gold-clad silver alloy |
| I/O connector | 62-pin D-SUB connector, male |
| PXI power requirement | 4.5 W at 5 V, 2.5 W at 3.3 V |
| Dimensions (L × W × H) | 3U, one slot, PXI/cPCI module, 21.6 × 2.0 × 13.0 cm (8.5 × 0.8 × 5.1 in.) |
| Weight | 250 g (9 oz.) |
| Operating temperature | 0 °C to 55 °C |
| Storage temperature | -20 °C to 70 °C |
| Relative humidity | 5% to 85%, noncondensing |
| Pollution Degree | 2 |
| Maximum altitude | 2,000 m |
| Operational Shock | 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Test profile developed in accordance with MIL-PRF-28800F.) |
| Random vibration, operating | 5 Hz to 500 Hz, 0.3 grms |
| Random vibration, nonoperating | 5 Hz to 500 Hz, 2.4 grms (Tested in accordance with IEC 60068-2-64. Nonoperating test profile exceeds the requirements of MIL-PRF-28800F, Class 3.) |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxi-2566-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答