扫描速率:140 周期/秒
模式(n线):1线
总线连接器:PXI混合
最大直流切换电流:1 A
196通道,1线PXI多路复用器开关模块
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
扫描速率:140 周期/秒
模式(n线):1线
总线连接器:PXI混合
最大直流切换电流:1 A
196通道,1线PXI多路复用器开关模块
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| CHx | Signal connection |
| COM | Routing destination for all channels |
| — | No connection |
| CHx+ | Positive signal connection |
| CHx- | Negative signal connection |
| COM+ | Routing destination for all positive channels |
| COM- | Routing destination for all negative channels |
| — | No connection |
| CHx+ | Positive signal connection |
| CHx- | Negative signal connection |
| COM+ | Routing destination for all positive channels |
| COM- | Routing destination for all negative channels |
| — | No connection |
| Maximum switching voltage Channel-to-channel 100 V Channel-to-ground 100 V, CAT I | Channel-to-channel |
| Channel-to-channel | 100 V |
| Channel-to-ground | 100 V, CAT I |
| Maximum switching power (per channel) | 60 W, 62.5 VA (DC to 60 Hz) |
| DC isolation resistance (between channel and COM terminals) | >1 GΩ, typical at 25 °C |
| Maximum total current (switching or carry) | 1 A |
| Minimum switch load[1][2] | 20 mV /1 mA |
| DC path resistance[3] Initial <0.5 Ω, warranted End-of-life ≥1.0 Ω | Initial |
| Initial | <0.5 Ω, warranted |
| End-of-life | ≥1.0 Ω |
| Differential thermal EMF | 3 μV, typical[4] <12 μV, maximum |
| Bandwidth (-3 dB, 50 Ω termination) 1-wire >20 MHz 2-wire >8 MHz | 1-wire |
| 1-wire | >20 MHz |
| 2-wire | >8 MHz |
| Channel-to-channel isolation (50 Ω termination)[5] 1-wire channels in different relays 10 kHz >90 dB 100 kHz >70 dB 1 MHz >50 dB 1-wire channels in the same relay 10 kHz >68 dB 100 kHz >48 dB 1 MHz >28 dB 2-wire channels 10 kHz >95 dB 100 kHz >75 dB 1 MHz >55 dB | 1-wire channels in different relays 10 kHz >90 dB 100 kHz >70 dB 1 MHz >50 dB |
| 1-wire channels in different relays 10 kHz >90 dB 100 kHz >70 dB 1 MHz >50 dB | 10 kHz |
| 10 kHz | >90 dB |
| 100 kHz | >70 dB |
| 1 MHz | >50 dB |
| 1-wire channels in the same relay 10 kHz >68 dB 100 kHz >48 dB 1 MHz >28 dB | 10 kHz |
| 10 kHz | >68 dB |
| 100 kHz | >48 dB |
| 1 MHz | >28 dB |
| 2-wire channels 10 kHz >95 dB 100 kHz >75 dB 1 MHz >55 dB | 10 kHz |
| 10 kHz | >95 dB |
| 100 kHz | >75 dB |
| 1 MHz | >55 dB |
| Open channel isolation (50 Ω termination) 10 kHz >90 dB 100 kHz >70 dB 1 MHz >50 dB | 10 kHz |
| 10 kHz | >90 dB |
| 100 kHz | >70 dB |
| 1 MHz | >50 dB |
| Relay operate time[6] | 1 ms, typical 3.4 ms, maximum |
| Expected relay life[7] Mechanical 1 × 108 cycles Electrical 10 VDC, 100 mADC resistive 2.5 × 106 cycles 10 VDC, 1 ADC resistive 1 × 106 cycles 30 VDC, 1 ADC resistive 5 × 105 cycles 60 VDC, 1 ADC resistive 1 × 105 cycles | Mechanical |
| Mechanical | 1 × 108 cycles |
| Electrical 10 VDC, 100 mADC resistive 2.5 × 106 cycles 10 VDC, 1 ADC resistive 1 × 106 cycles 30 VDC, 1 ADC resistive 5 × 105 cycles 60 VDC, 1 ADC resistive 1 × 105 cycles | 10 VDC, 100 mADC resistive |
| 10 VDC, 100 mADC resistive | 2.5 × 106 cycles |
| 10 VDC, 1 ADC resistive | 1 × 106 cycles |
| 30 VDC, 1 ADC resistive | 5 × 105 cycles |
| 60 VDC, 1 ADC resistive | 1 × 105 cycles |
| Input trigger Sources PXI trigger lines <0…7> Minimum pulse width[8] 150 ns | Sources |
| Sources | PXI trigger lines <0…7> |
| Minimum pulse width[8] | 150 ns |
| Output trigger Destinations PXI trigger lines <0...7> Default pulse width 2 μs, typical | Destinations |
| Destinations | PXI trigger lines <0...7> |
| Default pulse width | 2 μs, typical |
| Relay type | Electromechanical, latching |
| Relay contact material[9] | Palladium-ruthenium, gold covered |
| I/O connector | 200 POS LFH Matrix 50, receptacle |
| Power requirement PXI 6 W at 5 V 2.5 W at 3.3 V PXI Express 7.5 W at 12 V 2.5 W at 3.3 V | PXI |
| PXI | 6 W at 5 V 2.5 W at 3.3 V |
| PXI Express | 7.5 W at 12 V 2.5 W at 3.3 V |
| Dimensions (L × W × H) | 3U, one slot, PXI/cPCI module 21.6 × 2.0 × 13.0 cm (8.5 × 0.8 × 5.1 in.) |
| Weight | 231 g (8.1 oz) |
| Maximum altitude | 2,000 m (at 25 °C ambient temperature) |
| Pollution degree | 2 |
| Ambient temperature range | 0 °C to 55 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) |
| Relative humidity range | 10% to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.) |
| Ambient temperature range | -40 °C to 71 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) |
| Relative humidity range | 5% to 95%, noncondensing (Tested in accordance with IEC 60068-2-56.) |
| Operational shock | 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Test profile developed in accordance with MIL-PRF-28800F.) |
| Random vibration Operating 5 Hz to 500 Hz, 0.31 grms (Tested in accordance with IEC 60068-2-64.) Nonoperating 5 Hz to 500 Hz, 2.46 grms (Tested in accordance with IEC 60068-2-64. Test profile exceeds the requirements of MIL-PRF-28800F, Class 3.) | Operating |
| Operating | 5 Hz to 500 Hz, 0.31 grms (Tested in accordance with IEC 60068-2-64.) |
| Nonoperating | 5 Hz to 500 Hz, 2.46 grms (Tested in accordance with IEC 60068-2-64. Test profile exceeds the requirements of MIL-PRF-28800F, Class 3.) |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxi-2575-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答