总线连接:PXI Express
最大交流切换电压:8 V
继电器类型:FET
开关带宽:6.6 GHz
PXIe,6.6 GHz,50Ω,固态,两路4x1 PXI射频多路复用器开关模块
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
总线连接:PXI Express
最大交流切换电压:8 V
继电器类型:FET
开关带宽:6.6 GHz
PXIe,6.6 GHz,50Ω,固态,两路4x1 PXI射频多路复用器开关模块
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| CHxA | Bank A signal connection |
| CHxB | Bank B signal connection |
| COMx | Routing destination for channels on the corresponding bank |
| TRIG IN | Trigger input connection |
| TRIG OUT | Trigger output connection |
| Minimum input frequency | 10 MHz |
| Characteristic impedance (Z0) | 50 Ω, nominal |
| Coupling | AC |
| Maximum safe DC input voltage | ±8 V |
| Chassis power ON | +30 dBm |
| Chassis power OFF | +20 dBm |
| Insertion loss ≤2.4 GHz <4.1dB <3.4 dB, typical ≤6 GHz <5.8 dB <5.1 dB, typical ≤6.6 GHz <7.0 dB <6.1 dB, typical | ≤2.4 GHz |
| ≤2.4 GHz | <4.1dB <3.4 dB, typical |
| ≤6 GHz | <5.8 dB <5.1 dB, typical |
| ≤6.6 GHz | <7.0 dB <6.1 dB, typical |
| Insertion loss thermal coefficient | α = 2050 ppm/°C |
| Voltage standing wave ratio (VSWR) ≤2.4 GHz <1.7 <1.5, typical ≤6 GHz <1.8 <1.5, typical ≤6.6 GHz <2.4 <1.6, typical | ≤2.4 GHz |
| ≤2.4 GHz | <1.7 <1.5, typical |
| ≤6 GHz | <1.8 <1.5, typical |
| ≤6.6 GHz | <2.4 <1.6, typical |
| CH-COM isolation ≤2.4 GHz >70 dB >84 dB, typical ≤6 GHz >61 dB >74 dB, typical ≤6.6 GHz >59 dB <72 dB, typical | ≤2.4 GHz |
| ≤2.4 GHz | >70 dB >84 dB, typical |
| ≤6 GHz | >61 dB >74 dB, typical |
| ≤6.6 GHz | >59 dB <72 dB, typical |
| CH-CH isolation ≤2.4 GHz >69 dB >90 dB, typical ≤6 GHz >58 dB >74 dB, typical ≤6.6 GHz >53 dB <71 dB, typical | ≤2.4 GHz |
| ≤2.4 GHz | >69 dB >90 dB, typical |
| ≤6 GHz | >58 dB >74 dB, typical |
| ≤6.6 GHz | >53 dB <71 dB, typical |
| Bank-to-bank crosstalk | <-90 dB, typical |
| Channel-to-channel skew | <10 ps, typical |
| Propagation delay | 1,720 psi, typical |
| Input 1 dB Compression | >27.6 dBm, minimum >32.0 dBm, typical |
| Second-order harmonic distortion (Input IP2 (IIP2))[1] IP2 (input) >+89 dBm, typical | IP2 (input) |
| IP2 (input) | >+89 dBm, typical |
| Third-order intermodulation distortion (Input IP3 (IIP3))[2] IP3 (input) >+54 dBm, typical | IP3 (input) |
| IP3 (input) | >+54 dBm, typical |
| Input trigger Sources PXI trigger lines <0...7> Minimum pulse width[5] 150 ns | Sources |
| Sources | PXI trigger lines <0...7> |
| Minimum pulse width[5] | 150 ns |
| Front panel input voltage | -0.5 V, minimum +0.7 V, VL maximum +2.0 V, VH minimum +3.3 V, nominal +5.5 V, minimum |
| Front panel nominal voltage | 3.3 V TTL, 8 mA |
| Output trigger Destinations PXI trigger lines <0...7> Default pulse width 2 μs, typical | Destinations |
| Destinations | PXI trigger lines <0...7> |
| Default pulse width | 2 μs, typical |
| Switch type | FET |
| Front panel connectors I/O 10 SMA jacks, female Triggers 2 SMB jacks, female | I/O |
| I/O | 10 SMA jacks, female |
| Triggers | 2 SMB jacks, female |
| Power requirement PXI 0.6 W at 5 V 0.6 W at 3.3 V PXI Express 0.4 W at 12 V 1 W at 3.3 V | PXI |
| PXI | 0.6 W at 5 V 0.6 W at 3.3 V |
| PXI Express | 0.4 W at 12 V 1 W at 3.3 V |
| Dimensions (L × W × H) | 3U, one slot, PXI/cPCI module, PXI Express compatible 21.6 cm × 2.0 cm × 13.0 cm (8.5 in. × 0.8 in. × 5.1 in.) |
| Weight | 774 g (27.3 oz) |
| Operating temperature | 0 °C to 55 °C |
| Storage temperature | -20 °C to 70 °C |
| Relative humidity | 5% to 85%, noncondensing |
| Pollution Degree | 2 |
| Maximum altitude | 2,000 m |
| Operational Shock | 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Test profile developed in accordance with MIL-PRF-28800F.) |
| Random vibration, operating | 5 Hz to 500 Hz, 0.3 grms |
| Random vibration, nonoperating | 5 Hz to 500 Hz, 2.4 grms (Tested in accordance with IEC 60068-2-64. Nonoperating test profile exceeds the requirements of MIL-PRF-28800F, Class 3.) |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxie-2543-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答