双向数字通道数量:32
逻辑电平和范围:1.2 V
信令类型:单端
最大信号生成速率:100 Mbits/s
200 MHz,32通道PXI数字波形
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
双向数字通道数量:32
逻辑电平和范围:1.2 V
信令类型:单端
最大信号生成速率:100 Mbits/s
200 MHz,32通道PXI数字波形
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| 33 | DDC_CLK OUT |
| 67 | Strobe |
| 1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61, 63, 65 | DIO <0..31> |
| 26, 30, 64 | Programmable Function Interface (PFI) <1..3> |
| 2, 4, 6, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 54, 56, 58, 62, 66 | GND |
| 8, 52, 60 | RESERVED |
| CLK IN | Reference Clock Input |
| CLK OUT | Reference Clock Output |
| Data Number of channels 32, single data rate (SDR)[1] Direction control Per channel Per operation | Number of channels |
| Number of channels | 32, single data rate (SDR)[1] |
| Direction control | Per channel Per operation |
| Time to tristate (tPZ), 2 kΩ and 15 pF load | 6.2 ns, nominal |
| Programmable Function Interface (PFI) Number of channels 4 Direction control Per channel | Number of channels |
| Number of channels | 4 |
| Direction control | Per channel |
| Clock terminals Input 2 Output 2 | Input |
| Input | 2 |
| Output | 2 |
| Channels | Data DDC CLK OUT PFI <0..3> |
| Generation signal type | Single-ended |
| DC generation voltage accuracy[2] | ±35 mV, typical ±200 mV, maximum |
| 1.2 V (VOH = 1.2 V) | 0.0 V |
| 1.5 V (VOH = 1.5 V) | 1.3 V |
| 1.8 V (VOH = 1.8 V) | 1.6 V |
| 2.5 V (VOH = 2.5 V) | 2.3 V |
| 3.3 V (VOH = 3.3 V) | 3.1 V |
| Output impedance | 50 Ω, nominal |
| Maximum allowed DC drive strength per channel, by logic family 1.2 V ±12 mA, nominal 1.5 V ±15 mA, nominal 1.8 V ±18 mA, nominal 2.5 V ±25 mA, nominal 3.3 V ±33 mA, nominal | 1.2 V |
| 1.2 V | ±12 mA, nominal |
| 1.5 V | ±15 mA, nominal |
| 1.8 V | ±18 mA, nominal |
| 2.5 V | ±25 mA, nominal |
| 3.3 V | ±33 mA, nominal |
| Data channel driver enable/disable control | Software-selectable: per channel |
| Channel power-on state | Drivers disabled, 50 kΩ nominal input impedance |
| Output protection Range 0 V to 5 V Duration Indefinite | Range |
| Range | 0 V to 5 V |
| Duration | Indefinite |
| Channels | Data STROBE PFI <0..3> |
| Acquisition signal type | Single-ended |
| Accuracy[4] | ±150 mV, typical ±30%, maximum |
| 1.2 V (VIH, VIL = 0.60 V) | 420 mV |
| 1.5 V (VIH, VIL = 0.75 V) | 525 mV |
| 1.8 V (VIH, VIL = 0.90 V) | 630 mV |
| 2.5 V (VIH, VIL = 1.25 V) | 875 mV |
| 3.3 V (VIH, VIL = 1.65 V) | 1.155 V |
| Input impedance | High-impedance (50 kΩ), nominal |
| Input protection[6] | -1 V to 5 V |
| Sources | 1. On Board clock (internal 800 MHz VCO with 32-bit DDS) 2. CLK IN (SMA jack connector) 3. STROBE (Digital Data & Control [DDC] connector; acquisition only) |
| Frequency range On Board clock 100 Hz to 200 MHz CLK IN 20 kHz to 200 MHz STROBE 100 Hz to 200 MHz | On Board clock |
| On Board clock | 100 Hz to 200 MHz |
| CLK IN | 20 kHz to 200 MHz |
| STROBE | 100 Hz to 200 MHz |
| On Board clock characteristics Resolution[7] 0.2 Hz, maximum Accuracy[8] ±150 ppm + 5 ppm per year On Board clock characteristics valid only when PLL reference source is set to None Frequency accuracy ±150 ppm (including temperature effects), typical Aging ±5 ppm first year, nominal | Resolution[7] |
| Resolution[7] | 0.2 Hz, maximum |
| Accuracy[8] | ±150 ppm + 5 ppm per year |
| On Board clock characteristics valid only when PLL reference source is set to None Frequency accuracy ±150 ppm (including temperature effects), typical Aging ±5 ppm first year, nominal | Frequency accuracy |
| Frequency accuracy | ±150 ppm (including temperature effects), typical |
| Aging | ±5 ppm first year, nominal |
| Sample clock relative delay adjustment[9] Range Acquisition sessions 0.0 to 1.0 Sample clock periods Generation sessions 0.0 ns to 5.0 ns Resolution 0.5 ps | Range Acquisition sessions 0.0 to 1.0 Sample clock periods Generation sessions 0.0 ns to 5.0 ns |
| Range Acquisition sessions 0.0 to 1.0 Sample clock periods Generation sessions 0.0 ns to 5.0 ns | Acquisition sessions |
| Acquisition sessions | 0.0 to 1.0 Sample clock periods |
| Generation sessions | 0.0 ns to 5.0 ns |
| Resolution | 0.5 ps |
| Exported Sample clock destinations | DDC CLK OUT (DDC connector) CLK OUT (SMA jack connector) |
| Exported Sample clock delay Range 0.0 to 1.0 Sample clock periods Resolution (δC)[10] 117 ps to 143 ps, nominal Frequency On Board clock All supported frequencies External clock Frequencies ≥20 MHz | Range |
| Range | 0.0 to 1.0 Sample clock periods |
| Resolution (δC)[10] | 117 ps to 143 ps, nominal |
| Frequency On Board clock All supported frequencies External clock Frequencies ≥20 MHz | On Board clock |
| On Board clock | All supported frequencies |
| External clock | Frequencies ≥20 MHz |
| Exported Sample clock jitter, using On Board clock Period 24 psrms, characteristic Cycle-to-cycle 43 psrms, characteristic | Period |
| Period | 24 psrms, characteristic |
| Cycle-to-cycle | 43 psrms, characteristic |
| Channels | Data DDC CLK OUT PFI <0..3> |
| Data channel-to-channel skew[11] | ±300 ps, maximum |
| Maximum data rate per channel SDR 100 Mbps | SDR |
| SDR | 100 Mbps |
| Data position modes | Sample clock rising edge Sample clock falling edge Delay from Sample clock rising edge |
| Data delay banks | 1 bank for all channels and PFI lines |
| Generation data delay Range (δG) 0.0 to 1.0 Sample clock periods Resolution (δG)[12] 117 ps to 143 ps, nominal Frequency On Board clock All supported frequencies External clock Frequencies ≥20 MHz | Range (δG) |
| Range (δG) | 0.0 to 1.0 Sample clock periods |
| Resolution (δG)[12] | 117 ps to 143 ps, nominal |
| Frequency On Board clock All supported frequencies External clock Frequencies ≥20 MHz | On Board clock |
| On Board clock | All supported frequencies |
| External clock | Frequencies ≥20 MHz |
| Exported Sample clock offset (tCO) | 0.0 ns or 1.65 ns (default),[13] nominal |
| Time delay from On Board Sample clock to DDC connector (tSCDDC) | 8.1 ns, characteristic; exported Sample clock offset = 0 ns |
| 1.65 ns | tp - 2.15 ns |
| 0.0 ns | tp - 500 ps |
| Channels | Data STROBE PFI <0..3> |
| Channel-to-channel skew[14] | ±350 ps, maximum |
| Maximum data rate per channel[15] SDR 100 Mbps | SDR |
| SDR | 100 Mbps |
| Data position modes | Sample clock rising edge Sample clock falling edge Delay from Sample clock rising edge |
| 1.25 V to 1.65 V | 2.8 ns |
| 0.90 V to 1.20 V | 1.20 ns |
| 0.75 V to 0.85 V | 1.40 ns |
| 0.60 V to 0.70 V | 1.75 ns |
| Setup and hold times to Sample clock[17] Setup time (tsusc) 900 ps, nominal Hold time (tHSC) 425 ps, nominal | Setup time (tsusc) |
| Setup time (tsusc) | 900 ps, nominal |
| Hold time (tHSC) | 425 ps, nominal |
| Data delay banks | 1 bank for all channels and PFI lines |
| Time delay from DDC connector to internal Sample clock | 6.8 ns, nominal |
| Acquisition data delay Frequency On Board clock All supported frequencies External clock and STROBE Frequencies ≥20 MHz Range 0.0 to 1.0 Sample clock periods Resolution[18] 117 ps to 143 ps, nominal | Frequency On Board clock All supported frequencies External clock and STROBE Frequencies ≥20 MHz |
| Frequency On Board clock All supported frequencies External clock and STROBE Frequencies ≥20 MHz | On Board clock |
| On Board clock | All supported frequencies |
| External clock and STROBE | Frequencies ≥20 MHz |
| Range | 0.0 to 1.0 Sample clock periods |
| Resolution[18] | 117 ps to 143 ps, nominal |
| Connector | SMA jack |
| Direction | Input |
| Destinations | 1. Reference clock (PLL) 2. Sample clock |
| Input coupling | AC |
| Input protection | ±10 VDC, nominal |
| Input impedance | Software-selectable: 50 Ω (default) or 1 kΩ, nominal |
| Minimum detectable pulse width | 2 ns, nominal |
| Clock requirements | Free-running (continuous) clock |
| Square wave voltage range | 0.65 Vpk-pk to 5.0 Vpk-pk |
| 0.65 to 5.0 | 20 MHz to 200 MHz |
| 1.0 to 5.0 | 13 MHz to 200 MHz |
| 1.3 to 5.0 | 10 MHz to 200 MHz |
| 2.6 to 5.0 | 5 MHz to 200 MHz |
| As Sample clock[19] Frequency range 20 kHz to 200 MHz Duty cycle range ƒ <20 MHz 25% to 75% ƒ ≥20 MHz 40% to 60% | Frequency range |
| Frequency range | 20 kHz to 200 MHz |
| Duty cycle range ƒ <20 MHz 25% to 75% ƒ ≥20 MHz 40% to 60% | ƒ <20 MHz |
| ƒ <20 MHz | 25% to 75% |
| ƒ ≥20 MHz | 40% to 60% |
| As Reference clock Frequency range 5 MHz to 100 MHz (integer multiples of 1 MHz) Frequency accuracy[20] ±0.1% Duty cycle range 25% to 75% | Frequency range |
| Frequency range | 5 MHz to 100 MHz (integer multiples of 1 MHz) |
| Frequency accuracy[20] | ±0.1% |
| Duty cycle range | 25% to 75% |
| Connector | DDC |
| Direction | Input |
| Destination | Sample clock (acquisition only) |
| Frequency range | 100 Hz to 200 MHz |
| Duty cycle range (at the programmed threshold) ƒ <20 MHz 25% to 75% ƒ ≥20 MHz 40% to 60% (corrected to 50%) | ƒ <20 MHz |
| ƒ <20 MHz | 25% to 75% |
| ƒ ≥20 MHz | 40% to 60% (corrected to 50%) |
| Minimum detectable pulse width[21] | 2 ns, nominal |
| Clock requirements | Free-running (continuous) clock |
| Input impedance | 50 kΩ, nominal |
| Connector | SMA jack |
| Direction | Output |
| Sources | 1. Sample clock (excluding STROBE) 2. Reference clock (PLL) |
| Output impedance | 50 Ω, nominal |
| Logic type | Matched with generation and acquisition sessions |
| Connector | DDC |
| Direction | Output |
| Source | Sample clock (generation only) |
| Sources[22] | 1. PXI_CLK100 (PXI Express backplane) 2. CLK IN (SMA jack connector) 3. None (internal oscillator locked to an internal reference) |
| Destination | CLK OUT (SMA jack connector) |
| Lock time | 150 ms, maximum (not including software latency) |
| Frequency range | 5 MHz to 100 MHz (integer multiples of 1 MHz), 0.1% required accuracy |
| Duty cycle range | 25% to 75% |
| Onboard memory size[23] 1 Mbit per channel Acquisition 1 Mbit per channel (4 MBytes total) Generation 1 Mbit per channel (4 MBytes total) 8 Mbit per channel Acquisition 8 Mbit per channel (32 MBytes total) Generation 8 Mbit per channel (32 MBytes total) 64 Mbit per channel Acquisition 64 Mbit per channel (256 MBytes total) Generation 64 Mbit per channel (256 MBytes total) | 1 Mbit per channel Acquisition 1 Mbit per channel (4 MBytes total) Generation 1 Mbit per channel (4 MBytes total) |
| 1 Mbit per channel Acquisition 1 Mbit per channel (4 MBytes total) Generation 1 Mbit per channel (4 MBytes total) | Acquisition |
| Acquisition | 1 Mbit per channel (4 MBytes total) |
| Generation | 1 Mbit per channel (4 MBytes total) |
| 8 Mbit per channel Acquisition 8 Mbit per channel (32 MBytes total) Generation 8 Mbit per channel (32 MBytes total) | Acquisition |
| Acquisition | 8 Mbit per channel (32 MBytes total) |
| Generation | 8 Mbit per channel (32 MBytes total) |
| 64 Mbit per channel Acquisition 64 Mbit per channel (256 MBytes total) Generation 64 Mbit per channel (256 MBytes total) | Acquisition |
| Acquisition | 64 Mbit per channel (256 MBytes total) |
| Generation | 64 Mbit per channel (256 MBytes total) |
| Generation Single-waveform mode Generates a single waveform once, n times, or continuously Scripted mode[24] Generates a simple or complex sequence of waveforms. Finite repeat count 1 to 16,777,216 Waveform quantum[25] Data width = 4 1 sample Data width = 2 2 samples Waveform block size (in physical memory) Data width = 4 32 samples Data width = 2 64 samples | Single-waveform mode |
| Single-waveform mode | Generates a single waveform once, n times, or continuously |
| Scripted mode[24] | Generates a simple or complex sequence of waveforms. |
| Finite repeat count | 1 to 16,777,216 |
| Waveform quantum[25] Data width = 4 1 sample Data width = 2 2 samples | Data width = 4 |
| Data width = 4 | 1 sample |
| Data width = 2 | 2 samples |
| Waveform block size (in physical memory) Data width = 4 32 samples Data width = 2 64 samples | Data width = 4 |
| Data width = 4 | 32 samples |
| Data width = 2 | 64 samples |
| Single waveform | 1 S |
| Continuous waveform | 128 S |
| Stepped sequence | 128 S |
| Burst sequence | 1056 S |
| Acquisition Minimum waveform size[27] 1 S Record quantum 1 S Total number of records[28] 2,147,483,647 Total pre-Reference trigger samples 0 up to full record Total post-Reference trigger samples 0 up to full record | Minimum waveform size[27] |
| Minimum waveform size[27] | 1 S |
| Record quantum | 1 S |
| Total number of records[28] | 2,147,483,647 |
| Total pre-Reference trigger samples | 0 up to full record |
| Total post-Reference trigger samples | 0 up to full record |
| 1. Start | Acquisition and generation |
| 2. Pause | Acquisition and generation |
| 3. Script <0..3> | Acquisition |
| 4. Reference | Acquisition |
| 5. Advance | Acquisition |
| 6. Stop | Generation |
| Sources | 1. PFI 0 (SMA jack connector) 2. PFI <1..3> (DDC connector) 3. PXI_TRIG <0..7> (PXI Express backplane) 4. Pattern match (acquisition sessions only) 5. Software (user function call) 6. Disabled (do not wait for a trigger) |
| Destinations, excluding Pause trigger[29] | 1. PFI 0 (SMA jack connector) 2. PFI <1..3> (DDC connector) 3. PXI_TRIG <0..6> (PXI Express backplane) |
| Minimum required trigger pulse width | 15 ns |
| Trigger rearm time Start to Reference trigger 150 S, maximum Start to Advance trigger 220 S, maximum Advance to Advance trigger 220 S, maximum Reference to Reference trigger 220 S, maximum | Start to Reference trigger |
| Start to Reference trigger | 150 S, maximum |
| Start to Advance trigger | 220 S, maximum |
| Advance to Advance trigger | 220 S, maximum |
| Reference to Reference trigger | 220 S, maximum |
| Delay from Pause trigger to Pause state and Stop trigger to Done state[30] Generation sessions 50 Sample clock periods + 300 ns, maximum Acquisition sessions Synchronous with the data | Generation sessions |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxie-6545-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答