客服
CD18-1-LThUs1 是松田精密（Matsusada Precision）CD 系列的一款电源/电池/充电桩测试，最大输出电压 18V，最大输出电流 1A，最大输出功率 18W
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
类似产品
槽位数：2高达1ms超高采样率，完全真实还原测试过程数据充转放过程无缝切换，无过充过放功能丰富的上位软件，支持生产分选功能每通道对应状态指示灯，分选更方便强大的数据存储与分析功能
槽位数：2采样间隔可设，最小可低于10ms，测量结果更精确3U机框可容纳30通道，超高空间利用率功能丰富的上位软件，支持生产分选功能每通道对应状态指示灯，分选更方便强大的数据存储与分析功能
CD18-1-LThUs1 18V/1A电池充放电测试系统 18W|松田精密 (在产)
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
松田精密|Matsusada Precision Inc.
CD18-1-LThUs1 电源/电池/充电桩测试
High-Performance Compact DC Charge/Discharge Power Supply 18V / 1A / 18W
产品简介
CD18-1-LThUs1 是松田精密（Matsusada Precision）CD 系列的一款电源/电池/充电桩测试，最大输出电压 18V，最大输出电流 1A，最大输出功率 18W。
Perform charge-discharge cycle testing on various rechargeable batteries, from single cells to battery packs, with this single unit.
The CD series is an ultra-small design DC charge-discharge power supply that can be easily installed on a test bench. When a battery is connected to the CD series, it safely performs charge and discharge cycle tests while monitoring the battery's voltage,current,and temperature.
With a compact width of 1.38"and 3.31",it can handle up to 108 W charge-discharge. The attached software is very convenient when you conduct multi-channel charge-discharge tests.
As the natural discharge during downtime after charging can be minimized by the sink current prevention function,this product is optimal for battery tests.
核心参数
•Maximum Output Voltage：18 V
• 输入电压：1.5 to 18 A
•Maximum I/O Current：1 A
• Maximum I/O Power：18 W
• 交流 input / 120 Vac ±10% 50 Hz/60 Hz 1-phase / Input Current (typical)：1 A
• 200 Vac * ±10% 50 Hz/60 Hz 1-phase：0.5 A
• 输入电压：120 Vac ±10%,50/60 Hz,Single-phase
200 Vac ±10%,50/60 Hz,Single-phase (Option)
230 Vac ±10%,50/60 Hz,Single-phase (Option)
•电池 充电 Modes：Constant Current and Constant Voltage combination (CC/CV) charge mode
Constant Current (CC) charge mode
Constant Voltage (CV) charge mode
•电池 Discharging Modes：Constant Current (CC) discharge mode
Constant Resistance (CR) discharge mode
Constant Power (CP) discharge mode
• Protection functions：Overvoltage Protection (OVP)
Overcurrent Protection (OCP)
Under Voltage Protection (UVP)
Over Power Protection (OPP)
Internal Over Temperature Protection 1 (OTP)
Internal Over Temperature Protection 2 (OHP)
Over Battery Temperature Protection (OBP)
AC Input Voltage Failure (ACF)
Remote Sens Reverse Connect Protection (RS)
功能特性
• Constant Current/Constant Voltage (CC/CV) charge：By setting both the current value and voltage value, the output exceeding the value you set can be disabled.
• Constant Current (CC) charge：The charge is carried out at the current value you set. Even if the terminal voltage changes during charge,a constant current can be passed.
•Constant Voltage (CV) charge：The charge is carried out at the voltage value you set. Even if the charge current changes, a constant voltage can be applied.
• Charge completion condition setting：Setting of time The time can be set up to 999 hours 59 minutes 59 seconds by one-second unit. If the time reaches the setting time,the charge is completed. Setting of voltage Set the voltage value to complete the charge. If the terminal voltage of the battery reaches the setting value,the charge is completed (only at a constant current charge). Setting of current Set the current to complete the
•Constant Current (CC) Discharge：The discharge is carried out at the current value you set. Even if the terminal voltage changes during discharge, a constant current can be passed.
• Constant Resistance (CR) discharge：The discharge is carried out at the resistance value you set. The value of terminal voltage is measured and the current value for discharge is decided according to the setting value.
资源下载
松田精密（Matsusada Precision） · onetest 仪器资源库
松田精密|Matsusada Precision Inc.
CD18-1-LThUs1 电源/电池/充电桩测试 详细指标
High-Performance Compact DC Charge/Discharge Power Supply 18V / 1A / 18W
详细指标
以下指标取自松田精密（Matsusada Precision）官网 CD 系列产品页的「Models / Specifications / Options / Dimensions」区块，其中「型号输出参数」为该型号在官方型号表中的原始列值；官方原文为英文，此处按原文保留。详细规格与测试条件以官方数据手册为准。
型号输出参数
• Maximum Output Voltage：18 V
• 输入电压：1.5 to 18 A
• Maximum I/O Current：1 A
• Maximum I/O Power：18 W
• 交流 input / 120 Vac ±10% 50 Hz/60 Hz 1-phase / Input Current (typical)：1 A
• 200 Vac * ±10% 50 Hz/60 Hz 1-phase：0.5 A
• 230 Vac * ±10% 50 Hz/60 Hz 1-phase：0.35 A
系列共用规格
• 输入电压：120 Vac ±10%, 50/60 Hz, Single-phase
200 Vac ±10%, 50/60 Hz, Single-phase (Option)
230 Vac ±10%, 50/60 Hz, Single-phase (Option)
• 电池 充电 Modes：Constant Current and Constant Voltage combination (CC/CV) charge mode
Constant Current (CC) charge mode
Constant Voltage (CV) charge mode
• 电池 Discharging Modes：Constant Current (CC) discharge mode
Constant Resistance (CR) discharge mode
Constant Power (CP) discharge mode
• Protection functions：Overvoltage Protection (OVP)
Overcurrent Protection (OCP)
Under Voltage Protection (UVP)
Over Power Protection (OPP)
Internal Over Temperature Protection 1 (OTP)
Internal Over Temperature Protection 2 (OHP)
Over Battery Temperature Protection (OBP)
AC Input Voltage Failure (ACF)
Remote Sens Reverse Connect Protection (RS)
选件 / 附件
• -LGmb：digital interface board
Digital control with LAN/USB/RS-232C/RS-485/GPIB is available.
-LGmb devices connected in a daisy chain can control up to 16 units.
* Selecting this option replaces the standard USB port.
* For more information on the digital interface, refer to CO/USB series datasheet.
-LGmb: digital interface + communication cable 2 meters length
-LGmb(Mc0.15): digital interface + communication cable 0.15 meters length
-LGmb(Mc0.5): digital interface + communication cable 0.5 meters length
A separate adapter (sold separately) is required for connection. For details, click here .
• -LZ：carrying handle
The carrying handle is attached to the upper surface. ( only the model of dimension diagram C of datasheet )
• -L(200V)：200 Vac ±10% input on sale soon
For the input current, refer to the "MODELS".
• -L(230V)：230 Vac ±10% input on sale soon
For the input current, refer to the "MODELS".
• Adapters for various digital interfaces (additional accessories)：To use Matsusada Precision's digital interface, you need to prepare a digital interface adapter separately. The following interface adapters are available according to your controller port.
CO-E32m: LAN adapter
CO-U32m: USB adapter
CO-MET2-9: RS-232C (9 pin) adapter
CO-MET2-25: RS-232C (25 pin) adapter
CO-MET4-25: RS-485 (25 pin) adapter
CO-G32m: GPIB adapter (Scheduled for discontinuation in December 2028)
Adapter for digital interface
For details, refer to CO/USB series.
• 交流输入电缆：Included accessory Except for -L(200V), -L(230V) option
CABLE TYPE1
125 V/10 A
2.5 meters
Fixed length
Included accessory For -L(200V), -L(230V) option
CABLE TYPE3
250 V/10 A
2.5 meters
Fixed length
Additional accessory
CABLE TYPE4
250 V/10 A
2.5 meters
Fixed length
• Stand [1.38-inch wide models]：Convenient for a single use for an individual device.
• 机架式 shelf [ RMO 系列 ]：10 units * /1 shelf are stored in the cabinet, and each unit can be removed easily. [* 1.38-inch wide models]
资源下载
以上规格取自松田精密（Matsusada Precision）官网 CD 系列产品页（https://www.matsusada.com/product/battery-cycle-tester/cd/）。
松田精密（Matsusada Precision） · onetest 仪器资源库
全部
松田精密官方渠道
官方渠道（官网 / 热线 / 邮箱）
• 销售模式
Matsusada Precision Inc. 全球直销，不设授权代理商（官方 FAQ 明示 direct sales system）
• 全球咨询 +81-6-6150-5088
• 传真 +81-6-6150-5089
• 在线询价
https://www.matsusada.com/support/contact/
• 官网 https://www.matsusada.com/
全国办事处
美国办事处（北卡罗来纳）
• 电话 +1 (704) 496-2644
• 传真 +1 (704) 496-2643
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758