ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号
客服
厂商登录
类似产品
⚫工作频率：26.5GHz~40GHz⚫增益：≥40dB⚫输出CW饱和功率：≥10W⚫带内增益平坦度：≤±3dB⚫输入驻波：≤2⚫谐波抑制：≥20dBc⚫输入接口:波导⚫输出接口:波导⚫供电：220VAC⚫工作温度：-10℃ ～+40℃
宽带宽：100 kHz 至 20GHz反极性保护过压/欠压保护+28dBm（典型值） 输出功率 @ P1dB紧凑且易于使用，带有专用电源
用固态设计方案频率覆盖4K-40GHz功率等级高达10000W满足现有EMC标准中绝大多数应用场合双定向耦合器+高精度功率计实时监测并显示输出端的正反向功率及输出驻波
同厂商产品
DOSF45-3.3 是松田精密（Matsusada Precision）DOSF 系列的一款放大器，最大输出电压 45V，最大输出电流 3.3A，最大输出功率 150W。 The DOSF series features a compact design and ultra-fast response with a built-in function generator.
DOSF45-26.7 是松田精密（Matsusada Precision）DOSF 系列的一款放大器，最大输出电压 45V，最大输出电流 26.7A，最大输出功率 1.2kW。 The DOSF series features a compact design and ultra-fast response with a built-in function generator.
DOSF45-16 是松田精密（Matsusada Precision）DOSF 系列的一款放大器，最大输出电压 45V，最大输出电流 16A，最大输出功率 720W。 The DOSF series features a compact design and ultra-fast response with a built-in function generator.
- «
- 1
- »
DOSF45-13.3 45V/13.3A功率放大器 600W|松田精密 (在产)
参考价格 ：
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
松田精密|Matsusada Precision Inc.
DOSF45-13.3 放大器
ULTRA HIGH SPEED 双极性直流电源 45V / 13.3A / 600W
产品简介
DOSF45-13.3 是松田精密（Matsusada Precision）DOSF 系列的一款放大器，最大输出电压 45V，最大输出电流 13.3A，最大输出功率 600W。
The DOSF series features a compact design and ultra-fast response with a built-in function generator. Waveforms can be easily programmed from the front panel, which also offers memory settings and protection functions. With optional communication interfaces, seamless external control is available. The DOSF series also serves as a high-speed bipolar amplifier capable of accepting external signal inputs.
APPLICATIONS
Driving capacitive loads (capacitors)
Biasing inductive loads (coils, transformers, etc.)
Various motor testing
Solar inverters (PV inverters)
Evaluation test for solar panel related devices
Note : The DOSF series is not designed for battery charge/discharge applications.
For battery cycling requirements, please refer to the Battery Cycle Tester product page.
核心参数
• 输出电压：±45 V
• 电流：±13.3 A
• 功率：600 W
• 输入电压：100 to 120 Vac, 50/60 Hz, Single-phase (150/300 W models)
200 to 240 Vac, 50/60 Hz, Single-phase (600/720/1200/2000 W models)
200 to 240 Vac, 50/60 Hz, Single-phase (150/300 W models option)
• 输出控制：[Local] Front panel controls
[External control signal] Vcon-in, Input voltage -10 to +10 V
[Digital remote] Command (Option)
功能特性
• Basic Waveform Generation：DOSF is equipped with a built-in function generator that produces basic waves such as sine, rectangular, and triangle waves. The frequency range can be set between 1 Hz and 200 kHz. You can adjust amplitude; start phase (for sine wave), on-phase control (for sine wave), and duty ratio (for rectangular/triangle wave). Start phase (90 deg) On-phase control (+90 deg) On-phase control (–180 deg)
• Application：Power activation test, Inrush current measurement, waveform fluctuation test
• Sequence Functions：The DOSF series is equipped with programmable sequence functions, including step time, amplitude ramp, CV/CC mode switching, frequency sweep, AC superposition, step jump, and jump times. These useful functions help to program the desired waves in a very flexible manner, enabling the support of laboratory and research work efficiently. If amplifier's output turns off while it is running a sequence
•Applications：Testing of motors, Pulse power supply and Various evaluation
• Measurement Functions：The DOSF series is equipped with measurement functions that measure DC value,AC (RMS) value,maximum value,and minimum value. Thus,Wide frequency ranges,from DC to 200 kHz,can be measured automatically,and it is easy to change the settings depending on the application. [Example] measure AC waveform [Example] measure DC + AC waveform
•Memory Functions：During fundamental wave operation, output voltage (in CV mode), output current (in CC mode), CV/CC setting,and waveform setting can be saved in 10 setup memories. As sequence programs can be saved in up to three,it is useful when using frequently used multiple waveforms or sequence operations. Other functions:DOSF is equipped with Protection function,Key-lock function,and CV/CC switching,as
资源下载
松田精密（Matsusada Precision） · onetest 仪器资源库
松田精密|Matsusada Precision Inc.
DOSF45-13.3 放大器 详细指标
ULTRA HIGH SPEED 双极性直流电源 45V / 13.3A / 600W
详细指标
以下指标取自松田精密（Matsusada Precision）官网 DOSF 系列产品页的「Models / Specifications / Options / Dimensions」区块，其中「型号输出参数」为该型号在官方型号表中的原始列值；官方原文为英文，此处按原文保留。详细规格与测试条件以官方数据手册为准。
型号输出参数
• 输出电压：±45 V
• 电流：±13.3 A
• 功率：600 W
系列共用规格
• 输入电压：100 to 120 Vac, 50/60 Hz, Single-phase (150/300 W models)
200 to 240 Vac, 50/60 Hz, Single-phase (600/720/1200/2000 W models)
200 to 240 Vac, 50/60 Hz, Single-phase (150/300 W models option)
• 输出控制：[Local] Front panel controls
[External control signal] Vcon-in, Input voltage -10 to +10 V
[Digital remote] Command (Option)
选件 / 附件
• -LD：Interlock
• -LEt：LAN interface port *
Enable digital control via LAN
[Control items]
Output ON/OFF, Voltage/Current setting (AC and DC), Switch of constant voltage/constant current, Frequency setting, Waveform setting (sine wave, square wave, and triangle wave), Phase setting (sine wave), Duty setting (square wave and triangle wave)
• -LF：Floating ground (withstanding voltage of 200 Vdc)
The negative terminal of the output can float up to 200 V. However, please take note that the external control signal source (such as a function wave generator) and the common measuring device that connects to the amplifier's monitor terminal will also become floating potential in this case.
• -LGob：Optical interface port *
This option changes the standard interfaces to a built-in optical interface port. By combining this option with an adapter for optical connection (sold separately) , communication between the control device and the power supply can be controlled in an isolated state. Be sure to select this option when using the product in the following environments.
-LGob: Optical interface port + optical cable 2 meters
-LGob(Fc5): Optical interface port + optical cable 5 meters
-LGob(Fc10): Optical interface port + optical cable 10 meters
-LGob(Fc20): Optical interface port + optical cable 20 meters
-LGob(Fc40): Optical interface port + optical cable 40 meters
Select the optional optical interface port (-LGob) when using the bipolar power supply under the following conditions.
Noisy environments such as factories (example: when motors or coils are used near loads or power sources).
If this power supply and your controller (PC or PLC) cannot be installed within 2 meters.
When there is a possibility of arcing or an output short-circuit.
[Control items]
Output ON/OFF, Voltage/Current setting (AC and DC), Switch of constant voltage/constant current, Frequency setting, Waveform setting (sine wave, square wave, and triangle wave), Phase setting (sine wave), Duty setting (square wave and triangle wave)
• -LMsm: Master unit for master-slave control
-LMss: Slave unit for master-slave control：By connecting a master unit and slave units with dedicated control lines, the master unit can control all slave units simultaneously. Parallel connection allows for increased current capacity. Up to three units in total can be connected: one master unit and up to two slave units.
Note: Precautions for using the master-slave operation
Only the master-slave connection is available for the same model.
In parallel operation, the frequency range is narrower.
It can also operate as a standalone unit.
Factory adjustment is required when changing the master-slave combination.
Either communication option (-LEt, -LGob, or -LUs1) is necessary for only the master unit when the power supplies in the master-slave connection are controlled by digital communication. However, if you want to perform digital communication control on the slave unit alone, these options are also required for the slave unit.
• -LS：External output ON/OFF (Output ON/OFF)
• -LUs1：USB interface port *
Enable digital control via USB
Control items
Output ON/OFF, Voltage/Current setting (AC and DC), Switch of Constant Voltage/Constant Current, Frequency setting, Waveform setting (sine wave, square wave, and triangle wave), phase setting (sine wave), Duty setting (square wave and triangle wave)
• -L(220V)：Changing the input voltage
200 Vac to 240 Vac ±10% single-phase, 50 Hz/60 Hz input (150 W and 300 W models only)
The CABLE TYPE 5 AC input cable is included.
• 接口适配器：To use the optical interface, you need to prepare an optical interface adapter separately. The following interface adapters are available according to your controller port.
CO-E32: LAN to optical interface adapter
USB-OPT: USB to optical interface adapter
CO-OPT2-9: RS-232C (9 pin) to optical interface adapter
CO-OPT2-25: RS-232C (25 pin) to optical interface adapter
CO-OPT4-25: RS-485 (25 pin) to optical interface adapter
CO-G32: GPIB to optical interface adapter (Scheduled for discontinuation in December 2028)
Example of communication with optical fiber
For details, refer to the CO/USB series.
• AC INPUT CABLE：Standard up to 300 W model
CABLE TYPE2
Power input end
Input plug
125V/15A
Standard more than 600 W model
-L(220V) option
CABLE TYPE5
Power input end
Input plug
300V/25A
• 应用软件：PSS2en series: Remote control, Test workflow design, and Data logging
PSS2en is the dedicated software that can actuate various power supplies, electronic loads, and digital controllers for power supplies manufactured by Matsusada Precision Inc. with a simple setup.
It is perfect for the aging test, the burn-in test, and the withstand voltage test for electronic parts, as well as for the endurance test, intermittent/continuous operation test, or various simulation tests for automotive electrical components.
Click here for the PSS2en series
资源下载
以上规格取自松田精密（Matsusada Precision）官网 DOSF 系列产品页（https://www.matsusada.com/product/low-voltage-amplifiers/bipolar-power-supplies/dosf/）。
松田精密（Matsusada Precision） · onetest 仪器资源库
全部
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758