ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号
客服
厂商登录
同厂商产品
NEPTUNE是HTItalia（HTInstruments，意大利）出品的数字万用表。官网列出主要指标：量程（V）0.0至999.9；量程（V）0.5至999.9；量程（Hz）32.00至99.99。
MERCURY是HTItalia（HTInstruments，意大利）出品的数字万用表。官网列出主要指标：量程600.0mV；精度（*）(50Hz至60Hz)；量程6.000V。
HT8100是HTItalia（HTInstruments，意大利）出品的数字万用表。官网列出主要指标：量程50.000mV；量程50.000mV；量程50.000mA。
- «
- 1
- »
JUPITER 数字万用表|HT Italia (在产)
参考价格 ：
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
HT Italia
JUPITER 数字万用表
Multinfunction Multimeter for electrical installation safety testing.
产品简介
JUPITER 是 HT Italia（HT Instruments，意大利）出品的数字万用表。官网列出主要指标：量程（V） 0.0 至 690.0；量程（V） 0.5 至 690.0；量程（Hz） 33.00 至 99.99。
JUPITER.jpg
jupiter-media-2-sito.jpg
核心参数
• DC Voltage (Autorange) · 量程（V）：0.0 至 690.0｜分辨率（V） 0.1；精度 ±(0.5%rdg + 2digits)；输入 1MΩ；Overload protection 690VDC…
• AC, AC+DC, LoZ TRMS Voltage (Autorange) · 量程（V）：0.5 至 690.0｜分辨率（V） 0.1；频率 32Hz ÷ 1kHz；精度 ±(0.5%rdg + 2sigits)；保护 690VDC/ACrms
• Current and voltage frequency (Autorange) · 量程（Hz）：33.00 至 99.99｜分辨率（Hz） 0.01；精度 ±(0.1%rdg +1digit)
• AC TRMS current (Flexible clamp F3000U) – (Autorange) · 量程（mV）：1 至 3000｜分辨率（mV） 1；精度（*） ±(0.5%rdg + 2digits)
• AC TRMS Current (Flexible clamp FS 1V), DC, AC, AC+DC (STD clamp) – (Autorange) · 量程（mV）：1 至 1000｜分辨率（mV） 1；精度（*） ±(0.5%rdg + 2digits)
• INRUSH AC TRMS Current (Flexible clamp F3000U) · 量程（mV）：1 至 3000｜分辨率（mV） 1；精度（*） ±(2%reading + 2digits)
• INRUSH AC TRMS Current (Flexible clamp FS 1V), DC, AC, AC+DC (STD clamp) · 量程（mV）：1 至 1000｜分辨率（mV） 1；精度（*） ±(2%reading + 2digits)
• Resistance and continuity test (Autorange) · 量程（Ω）：0.0 至 199.9｜分辨率（Ω） 0.1；精度 ±(1.0%reading + 5digits)；Buzzer <30Ω
功能特性
• Measuring counts：6000
• AC/DC voltage：690V / AC+DC
• AC/DC current：AC+DC with external clamp transducer
• RCD tripping time：30mA, 100mA, 300mA A/F, AC
• RCD trip current measurement：RCD A/F, AC 30mA
• Out come OK/NOT OK：According to IEC60364-6
• Measurement category：CAT IV 600V / CAT III 690V
• Weight in grams (batteries included)：420
• Size (LxWxH) (mm)：175x85x55
• 标配功能（官网 Functions 列表）：DC, AC TRMS, AC+DC TRMS current by means of external clamp transducer · AC TRMS current by means of external flexible transducer F3000U · TRMS · LoZ Input · Resistance and continuity test with buzzer · Frequency · Tripping time and current of F-type RCDs · Leakage current (with optional accessory HT96U) · Non-trip earth resistance · Voltage and current harmonics up to the 25th and THD% · Loop impedance P-N, P-P, P-PE and calculation of prospective short-circuit current · Electric motor starting current (INRUSH) · Auto x1/2, x1, x2, x5, 0°, 180° · Phase sequence · Backlit LCD display · MAX/MIN/HOLD
• 适用标准 / 规范（官网 Guidelines）：CEI 64-8 612.6.3 · CEI 64-8 612.9 · IEC/EN61010-1 · IEC/EN61010-2-030 · IEC/EN61010-2-033 · IEC/EN61326-1 · IEC/EN61557-3 · IEC/EN61557-6 · UNE20460
官网原文（英文）
• 官网产品概述（英文原文）：Multinfunction Multimeter for electrical installation safety testing. · HT revolutionizes the portable instrument market by introducing the new JUPITER. The first multimeter who incorporates the functions available only in standard electrical safety testers and professional High-end multimeters.
资源下载
以上内容与指标均取自HT Italia（HT Instruments）官网该产品详情页与官方产品资料，未标注口径的为厂家公布值。
HT Italia SRL · onetest 仪器资源库
HT Italia
JUPITER 数字万用表 详细指标
Multinfunction Multimeter for electrical installation safety testing.
详细指标
以下为该型号的技术指标，逐表取自官方《JUPITER 用户手册》（英文版）TECHNICAL SPECIFICATIONS 章节、官方《JUPITER》数据手册、官网产品页，表内数值按官方表格原样摘录（原文为英文；括号内为单位）。厂家未列出的项目即官网与手册均未给出，未作推测。
技术特性 · DC Voltage (Autorange)
• 量程（V）：0.0 至 690.0｜分辨率（V） 0.1；精度 ±(0.5%rdg + 2digits)；输入 1MΩ；Overload protection 690VDC/ACrms
技术特性 · AC, AC+DC, LoZ TRMS Voltage (Autorange)
• 量程（V）：0.5 至 690.0｜分辨率（V） 0.1；频率 32Hz ÷ 1kHz；精度 ±(0.5%rdg + 2sigits)；保护 690VDC/ACrms
• Input impedance function VAC：1MΩ,
• Input impedance LoZ：3.5kΩ for 10s (@ 110V/50Hz), 4.5s (@ 230V/50Hz), 1s (@ 400V/50Hz). For higher voltage
• values, the input impedance increase to 10kΩ. CAUTION：do not leave the instrument connected for more than 1
• 说明：minute
• Automatic selection DC mode, Max crest factor：1.5
技术特性 · Current and voltage frequency (Autorange)
• 量程（Hz）：33.00 至 99.99｜分辨率（Hz） 0.01；精度 ±(0.1%rdg +1digit)
• 量程（Hz）：100.0 至 999.9｜分辨率（Hz） 0.1
• Voltage ran1g0e：0 0.0.5 V至 ÷9 69990.V9, Current field: 0.5A ÷ 3000A (Flexible clamp F300U), 1mV ÷ 1000mV (STD clamp)
技术特性 · AC TRMS current (Flexible clamp F3000U) – (Autorange)
• 量程（mV）：1 至 3000｜分辨率（mV） 1；精度（*） ±(0.5%rdg + 2digits)
• (*) For frequency >100Hz the accuracy is：±(1.5%rdg + 5dgt)
• Max crest factor：Frequency bandwidth: 1kHz ; Detection trigger threshold: 1%FS clamp [A] fixed
技术特性 · AC TRMS Current (Flexible clamp FS 1V), DC, AC, AC+DC (STD clamp) – (Autorange)
• 量程（mV）：1 至 1000｜分辨率（mV） 1；精度（*） ±(0.5%rdg + 2digits)
• (*) For frequency >100Hz the accuracy is：±(1.5%rdg + 5dgt)
• Max crest factor：Frequency bandwidth: 1kHz ; Detection trigger threshold: 1%FS clamp [A] fixed
技术特性 · INRUSH AC TRMS Current (Flexible clamp F3000U)
• 量程（mV）：1 至 3000｜分辨率（mV） 1；精度（*） ±(2%reading + 2digits)
• (*) Accuracy declared for frequency：DC, 42.5 ÷ 69Hz
• Max crest factor：3, Sampling frequency: 4kHz
• Response time：1ms (Peak), 16.7ms, 20ms, 50ms, 100ms, 150ms, 175ms, 200ms (max RMS)
• Detection trigger threshold：1%FS clamp [A] fixed
技术特性 · INRUSH AC TRMS Current (Flexible clamp FS 1V), DC, AC, AC+DC (STD clamp)
• 量程（mV）：1 至 1000｜分辨率（mV） 1；精度（*） ±(2%reading + 2digits)
• (*) Accuracy declared for frequency：DC, 42.5 ÷ 69Hz
• Max crest factor：3, Sampling frequency: 4kHz
• Response time：1ms (Peak), 16.7ms, 20ms, 50ms, 100ms, 150ms, 175ms, 200ms (max RMS)
• Detection trigger threshold：1%FS clamp [A] fixed
技术特性 · Resistance and continuity test (Autorange)
• 量程（Ω）：0.0 至 199.9｜分辨率（Ω） 0.1；精度 ±(1.0%reading + 5digits)；Buzzer <30Ω
• 量程（Ω）：200 至 1999｜分辨率（Ω） 1
技术特性 · Harmonic voltage and current (Autorange)
• Harmonic order：DC｜Fundamental frequency 42.5Hz 至 69Hz；分辨率 0.1V / 0.1A /0.1%；精度（*） ±(5.0%rdg+20digits)
• Harmonic order：1 至 25｜精度（*） ±(5.0%rdg+10digits)
• Harmonic order：THD%｜分辨率 0.1%；精度（*） ±(10.0%rdg+10digits)
• 说明：Accuracy of harmonic amplitudes expressed in % is evaluated considering the accuracy of parameters’ ratio
• 说明：(*) Harmonic voltages will be zeroed under the following conditions:
• • 1st harmonic：value <0.5V
• • DC, 2nd to 25th harmonic：harmonic value <0.5% fundamental value or value <0.5V
• 说明：(*) Harmonic currents will be zeroed under the following conditions
• • 1st harmonic：value <1.0%FS clamp [A]
• • DC, 2nd to 25th harmonic：harmonic value <0.5% fundamental value or value <1.0%FS clamp [A]
• 说明：Loop impedance L-N, L-L, Ra , Ra RCD (no RCD tripping)
• L-PE, L-N, L-L voltage：100V ÷ 690V, 42.5 ÷ 69Hz
技术特性 · Test current: (see table below)
• Test：Ra RCD｜测试电流 15mA；量程（Ω） 1 至 1999；分辨率（Ω） 1；精度 -0%,+(5.0%rdg + 3Ω)
• Test：L-N, L-L, Ra｜测试电流 100mA；量程（Ω） 0.1 至 199.9；分辨率（Ω） 0.1；精度 -0%,+(5.0%rdg + 0.3Ω)
• 说明：Test on RCD (instantaneous molded-case type)
• Residual current protection type (RCD)：AC ( ), A/F ( ),General (G)
• L-PE, L-N voltage：100V ÷ 690V, 42.5 ÷ 69Hz
• Tripping currents (IΔN)：30mA, 100mA, 300mA (see Table 1)
• Tripping time：resolution: 1ms, accuracy: ±(2.0%rdg + 2digits)
• 说明：Tripping times for moulded-case type RCDs
技术特性 · (n.a. = function not available)
• 值：30mA｜值 AC A/F；x 1/2 G 300 300；x 1 G 310 310；x 5 G 40 40；G 310 310；AUTO G x1 x5 x½ x1 x5 x½
• 值：100mA｜值 AC A/F；x 1/2 G 300 300；x 1 G 310 310；x 5 G n.a. n.a.；G n.a. n.a.；AUTO G x1 x½
• AUTO G：x1 x½
• 值：300mA｜值 AC A/F；x 1/2 G 300 300；x 1 G 310 310；x 5 G n.a. n.a.；G n.a. n.a.；AUTO G x1 x½ x1 x½
• Table 1：Possible combinations and tripping time duration [ms]
技术特性 · Tripping current (Ramp )
• 类型：AC｜I 30mA；Ramps（LCD） 6.0, 6.5, 7.0 .. 32.5, 33.3；电流（mA RMS @20ms） 6.0, 6.5, 7.0 .. 32.5, 33.0；精度 - 0%, +5%IΔ N
• 类型：A/F｜I 30mA；Ramps（LCD） 6.0, 6.5, 7.0 .. 32.5, 33.3；电流（mA RMS @20ms） 8.5, 9.2, 9.9 .. 46, 46.7；精度 - 0%, +5%IΔ N
技术特性 · Phase sequence with 1 terminal (*)
• 电压范围（V）：130 至 690｜频率 42.5 ÷ 69Hz
• 说明：(*) Measurement possible by direct contact on the metallic parts of the conductors (not on the insulating sheath)
附件
• 说明：Reference standards
• Instrument safety：IEC/EN61010-1,IEC/EN61010-2-030,
• 说明：IEC/EN61010-2-033
• EMC：IEC/EN 61326-1
• Test RCD：IEC/EN61557-6
• Test LOOP P-P, P-N, P-PE, Ra：IEC/EN61557-3
• Insulation：double insulation
• Pollution level：2
• Measurement category：CAT IV 600V, CAT III 690V to earth and
• 说明：between inputs
• 说明：Mechanical characteristics
• Size (L x W x H)：175 x 85 x 55mm (7 x 3 x 2in)
• Weight (batteries included)：420g (15 ounces)
• Mechanical protection：IP40
• 说明：Power supply
• Battery type：4x1.5V batteries type AAA IEC LR03
• Low battery indication：symbol “” ” on the display
• Battery life：V, A, Ω, → approx. 132h (backlight OFF)
• 说明：V, A, Ω, → approx. 68h (backlight ON)
• 说明：Ra (15mA) → approx. 5400 tests (backlight ON)
• 说明：Ra (100mA) → approx. 13k tests (backlight ON)
• 说明：RCD → approx. 8600 tests (backlight ON)
• 说明：RCD T → approx. 160k tests (backlight ON)
• Auto Power Off：after 15 minutes’ idling (can be disabled)
• 说明：Display
• Type of display：4 dgt LCD, max 9999 dots, decimal sign, point
• 说明：backlight and bargraph, indication of polarity
• Sampling frequency：2 times/s
• Conversion：RMS
• Reference temperature：23°C ± 5°C (73°F ± 41°F)
• Operating temperature：5°C ÷ 40°C (41°F ÷ 104°F)
• Operating humidity：<80%RH
• Storage temperature：-20°C ÷ 60°C (-4°F ÷ 140°F)
• Storage humidity：<80%RH
• Max operating altitude：2000m (6562ft)
• 说明：This instrument satisfies the requirements of Low Voltage Directive 2014/35/EU
• 说明：(LVD) and of EMC Directive 2014/30/EU
• 说明：This instrument satisfies the requirements of European Directive 2011/65/EU (RoHS)
• 说明：and 2012/19/EU (WEEE)
• 说明：See the attached packing list.
8.2. ASSISTANCE
• 说明：This instrument is warranted against any material or manufacturing defect, in compliance
• 说明：with the general sales conditions. During the warranty period, defective parts may be
• 说明：replaced. However, the manufacturer reserves the right to repair or replace the product.
• 说明：Should the instrument be returned to the After-sales Service or to a Dealer, transport will
• 说明：be at the Customer's charge. However,shipment will be agreed in advance. A report will
•说明：always be enclosed to a shipment, stating the reasons for the product's return. Only use
• 说明：original packaging for shipment. Any damage due to the use of non-original packaging
•说明：material will be charged to the Customer. The manufacturer declines any responsibility for
• 说明：injury to people or damage to property.
•说明：The warranty shall not apply in the following cases:
• 说明：•Repair and/or replacement of accessories and battery (not covered by warranty).
•说明：• Repairs that may become necessary as a consequence of an incorrect use of the
• 说明：instrument or due to its use together with non-compatible appliances.
•说明：• Repairs that may become necessary as a consequence of improper packaging.
• 说明：•Repairs which may become necessary as a consequence of interventions performed
•说明：by unauthorized personnel.
• 说明：•Modifications to the instrument performed without the manufacturer's explicit
• 说明：authorization.
• 说明：• Use not provided for in the instrument's specifications or in the instruction manual.
•说明：The content of this manual cannot be reproduced in any form without the manufacturer's
• 说明：authorization.
•说明：Our products are patented and our trademarks are registered. The manufacturer
• 说明：reserves the right to make changes in the specifications and prices if this is due to
•说明：improvements in technology.
• 说明：If the instrument does not operate properly,before contacting the After-sales Service,
•说明：please check the conditions of battery and cables and replace them, if necessary. Should
• 说明：the instrument still operate improperly,check that the product is operated according to the
•说明：instructions given in this manual. Should the instrument be returned to the After-sales
• 说明：Service or to a Dealer,transport will be at the Customer's charge. However, shipment will
• 说明：be agreed in advance. A report will always be enclosed to a shipment, stating the reasons
• 说明：for the product's return. Only use original packaging for shipment;any damage due to the
•说明：use of non-original packaging material will be charged to the Customer.
9.1. TEST ON DIFFERENTIAL SWITCHES (RCD)
•说明：Purpose of the test
• 说明：Checking standards that the general differential protection devices (G) have been correctly
•说明：installed and adjusted and that they maintain their characteristics over time. This check
• 说明：must make sure that the RCD trips at a current non higher than its rated operating current
•说明：IdN a
全部
Quick Guide and Downloadable Manual · Calibration report · Batteries · YABRS0002HT0 · C2065 · 4324-2 · HT96U · HT97U · HT98U · NOCANBA · YAAMK0001HT0 · F3000U · HT4006 · SP-2002
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758
AI问答