ONETEST 欢迎您

厂商登录 | 入驻

登录 | 注册 购物车 微信公众号
请完成安全验证

类似产品

MCP8010 300W可编程直流电源 80V/10A|魔研匠造
可编程直流电源,输出 0~80 V / 0~10 A / 300 W,电压与电流分辨率分别为 1 mV 和 1 mA,内置过压(OVP)与过流(OCP)保护、九组配置存储,低噪声运行
B2962C 直流电源|是德科技

B2962C 直流电源|是德科技 (在产)

产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案

是德科技|KEYSIGHT
NB6 系列台式直流电源,210 V,3 A,双通道,低噪声
产品简介
Keysight B2962C 电源提供宽电压范围(高达 ±210 V)和电流范围(高达 ±3 A 直流和 ±10.5 A 脉冲),具有出色的 6.5 位分辨率
核心参数
• 四线远程感测:是
• 每路最大电流:3 A
• 任意波形发生:是
• 最大功率:32 W
• 每路最大电压:210 V
• 输出路数:2
• 上升/下降编程建立时间:0.1 ms
• 数据记录仪:否
• LIST 模式:是
功能特性
• 产品亮点
是德科技 B2962C 系列 6.5 位低噪声源功率电源提供先进的功率与源解决方案,帮助研究人员、
设计人员和开发人员应对先进元件、电路和材料的复杂测量挑战。
与典型电源不同,B2962C 支持 4 象限工作,无论极性如何,都能在其量程和功率限制内提供精确的电压或电流。
B2962C 使您能够执行以下操作:
获得 6.5 位精度,并具备 100 nV 至 210 V / 1 nA 至 10.5 A 的宽双极性电压 / 电流输出能力。
体验卓越的噪声性能,使用外部滤波器时可达 10 µVrms、1 nVrms / √Hz。
使用精密任意波形功能以及 1 MHz 至 10 kHz 的用户自定义波形。
资源下载
以上内容与指标均取自是德科技(KEYSIGHT)官网该产品详情页与官方产品资料,未标注口径的为厂家公布值。
是德科技|KEYSIGHT · onetest 仪器资源库

 

 

是德科技 | KEYSIGHT
B2962C 直流电源 详细指标
Benchtop DC Power Supplies
一、特性规格
Figure 16. The B2961C/B2962C can emulate the DC voltage/current output characteristics of many devices and
Set up to 16 points
Pathwave BenchVue
Pathwave BenchVue allows you to control The B2961C/B2962C as voltage/current sources from a PC
without the need to do any programming. In addition, because Pathwave BenchVue supports a wide
variety of Keysight instruments (oscilloscopes, meters, etc.) it is a good choice when you need to
integrate together many different types of instruments on a benchtop.
Figure
17. Pathwave BenchVue
Graphical Web Interface
条件:allows you to enjoy the convenience of external PC control without the need for any special software.
and reliable data acquisition, and more efficient use of the equipment.
The B2961C/B2962C has a built-in web server that allows it to be controlled using a web browser. This
Simply connect your computer to the instrument via its LAN port, type in the IP address of The
B2961C/B2962C unit and begin making interactive tests.
Figure
18. Graphical Web Interface
PW9251A PathWave IV Curve Software
The PW9251A PathWave IV Curve is a ready-made GUI software to perform a variety of synchronous
current-voltage (IV) measurements without programming. Various analysis function on graphs and tables
allow users to review test results immediately after the measurement. Export functions of graphs with
markers and tables support efficient reporting. In addition, the test result files contains all the settings,
allowing users to accurately review and repeat the test. The PW9251A PathWave IV Curve accelerates
your research, development and design verification with increasing productivity, enabling more accurate
Figure
19. PathWave IV Curve Software
Ready-to-use instrument drivers simplify Programming
For users that want to create their own customized software, IVI-C and IVI-COM drivers for The
B2961C/B2962C are available. In addition, National Instruments LabView drivers are available at
低噪声滤波器
Number of channel 1 or 2 1 or 2 1 or
1 or 2
DC 或 arbitrary 波形输出
Max. voltage ± 210 V ± 21 V ± 42 V
± 210 V
Max. current ± 3.03 A ± 500 mA ± 105 mA
± 3.03 A
Pulsed Max. voltage ± 200 V ± 21 V ± 42 V
± 200 V
Max. current ± 10.5 A ± 500 mA ± 105 mA ± 3.03 A
4
Maximum power 31.8 W 10.5 W 4.4 W
31.8 W
Output polarity Bipolar (4-quadrant operation)
源分辨率
Digit 6.5 digit 6.5 digit 6.5 digit
6.5 digit
Minimum resolution 100 nV /10 fA 100 nV /1 nA 100 nV /10 ρA
100 nV /10 pA
DC 是是是是
Pulsed Yes Only voltage output Only voltage output Only voltage output
Sweep DC/Pulse/List Yes Only voltage output Only voltage output Only voltage output
Arbitrary wave form Yes Only voltage output Only voltage output Only voltage output
Noise
1
0.1 to 10 Hz ≤ 5 µVpp ≤ 5 µVpp ≤ 5 µVpp ≤
5 µVpp
10 to 20 MHz 3 mVrms
10 µVrms
(1 nVrms/√Hz @
10 kHz)
10 µVrms
(1 nVrms/√Hz @
10 kHz)
350 µVrms
Measurement capability
4.5 digit built-in voltage/current monitor
Source/ monitor ranges Voltage 200 mV to 200 V 200 mV to 20 V 2 200 mV to 200 V
200 mV to 200 V
Current 10 nA to 10 A 1 mA to 1 A 10 µA to 100 mA
10 µA to 3 A
波形 preview 是是是是
Dual View Only
2 ch model (B2962C)
是是是是
条件:1. Supplemental characteristics.
2. Maximum voltage output is limited to 21 V for 20 V range.
3. Maximum voltage output is limited to 42 V for 200 V range.
4. 10 A pulse range is not supported.
Max capacitive load 0.01 µF (normal mode) 50 µF 50 µF
1 mF
Interface GPIB, USB
2.0, LAN and digital I/O(LXI Core Conformant)
二、Specifications
Temperature 23 °C
±5 °C
Humidity
30 % to 80 % RH
After 60 minutes warm-up Ambient temperature change less than
±3 °C after self-calibration execution
Calibration period
1 year
Measurement speed
1 PLC (power line cycle)
最大值电压和电流
条件:1. See “Maximum pulse width and duty cycle” in Pulse Source Supplemental Characteristics for applicable maximum voltage and
ModelFunctionDescription
DC or pulsed210 V0.105 A
21 V1.515 A
6 V3.03 A
Pulsed only200 V1.515 A
6 V10.5 A
Figure20. Maximum voltage and current
三、DC 电压源规格
范围编程分辨率精度 ± (% reading + 偏置)
条件:1. Supplemental characteristics.
Noise (peak to peak) 0.1 Hz to 10 Hz 1 Max voltage (over range) ± 200 mV 100 nV ± (0.015 % + 225 μV) ≤ 5 μV ± 210 mV ± 2 V 1 μV ± (0.02 % + 350 μV) ≤ 15 μV
± 2.1 V
± 20 V 10 μV ± (0.015 % + 5 mV) ≤ 150 μV
± 21 V
± 200 V 100 μV ± (0.015 % + 50 mV) ≤ 1.5 mV
± 210 V
四、DC 电流源规格
范围编程分辨率精度 ± (% reading + 偏置)
条件:1. Supplemental characteristics.
2. 10 A range is available only for pulse mode, not available for DC mode.
3. Measurement speed: 0.01 PLC.
Noise (peak to peak) 0.1 Hz to 10 Hz 1 Max current (over range) ± 10 nA 10 fA ± (0.10 % + 50 pA) ≤ 1 pA ± 10.5 nA ± 100 nA 100 fA ± (0.06 % + 100 pA) ≤ 2 pA
± 105 nA
± 1 μA 1 pA ± (0.025 % + 500 pA) ≤ 20 pA
± 1.05 μA
± 10 μA 10 pA ± (0.025 % + 1.5 nA) ≤ 60 pA
± 10.5 μA
± 100 μA 100 pA ± (0.02 % + 25 nA) ≤ 1 nA
± 105 μA
± 1 mA 1 nA ± (0.02 % + 200 nA) ≤ 6 nA
± 1.05 mA
± 10 mA 10 nA ± (0.02 % + 2.5 μA) ≤ 100 nA
± 10.5 mA
± 100 mA 100 nA ± (0.02 % + 20 μA) ≤ 600 nA
± 105 mA
± 1 A 1 μA ± (0.03 % + 1.5 mA) ≤ 20 μA
± 1.05 A
± 1.5 A 1 μA ± (0.05 % + 3.5 mA) ≤ 20 μA
± 1.515 A
± 3 A 10 μA ± (0.4 % + 7 mA) ≤ 60 μA
± 3.03 A
± 10 A 2 10 μA ± (0.4 % + 25 mA)
± 10.5 A
五、源补充信息
Temperature coefficient (0 to 18 °C and 28 to 50 °C) ± (0.1 x accuracy)/°C
Max output power and source/sink limits
31.8 W
±6 V @ ±3.03 A, ±21 V @ ±1.515 A, ±210 V @
±105 mA, four
quadrant source or sink operation
Output location Channel 1 at front, and channel
2 at rear
Output connectors Banana jack. Triaxial connections are recommended for sourcing less
than
1 nA. A banana jack to triaxial adapter is available for low current
Low terminal connection Chassis grounded or floating
条件:with current exceeding 105 mA pulse only condition.
Sensing Modes
2-wire or 4-wire (Remote-sensing) connections
Maximum load Normal mode
0.01 μF
High capacitance mode
50 μF
DC floating voltage Max
± 250 V DC between low force and chassis ground
Guard offset voltage (V source) <
4 mV
Remote sense operation range Max voltage between High Force and High Sense =
3 V
Max voltage between Low Force and Low Sense =
3 V
Common mode isolation > 1 GΩ, <
4500 pF
Max sense lead resistance
1 kΩ for rated accuracy
Sense input impedance >
10 GΩ
Current limit/compliance Accuracy is same as current source. Min value is
1 % of range, or 1
nA in 10 nA range.
Voltage limit/compliance Accuracy is same as voltage source. Min value is
1 % of range, or 20
mV in 200 mV range.
Over range 101 % of source range for 1.5 A and 3 A ranges.
105 % of source
range other than
1.5 A and 3 A ranges. No over range for 200 V range
Over temperature protection Output turns off then resets at over temperature sensed internally
脉冲源
条件:Pulse width definition The time from 10 % leading to 90 % trailing edge as follows
Minimum programmable pulse width
50 μs
Pulse width programming resolution
1 μs
Figure
21. Pulse definition
Pulsed DC
条件:Minimum pulse width at the given voltage, current and settling conditions
1. Transient speed mode is set to FAST.
Max voltage Max peak current Max base current Pulse width Max duty cycle Max voltage Max current
DC or pulsed 210 V 0.105 A 0.105 A 50 μs to 99 999.9 s 99.9999 % 210 V
0.105 A
21 V 1.515 A 1.515 A 50 μs to 99 999.9 s 99.9999 % 21 V
1.515 A
6 V 3.03A 3.03 A 50 μs to 99 999.9 s 99.9999 % 6 V
3.03 A
Pulsed only 200 V 1.515 A 50 mA 50 μs to 2.5 ms
2.5 %
180 V 1.05 A 50 mA 50 μs to 10 ms
2.5 %
6 V 5.25 A 0.1 A 50 μs to 3 ms
3.0 %
6 V 10.5 A 0.5 A 50 μs to 1 ms
2.5 %
Source value Limit value Load Source settling (% of range) Min pulse width
200 V 1.5 A 200 Ω 0.1 %
1 ms
6 V 10.5 A 0.6 Ω 0.1 %
0.2 ms
1.5 A 200 V 65 Ω 0.1 %
2.5 ms
10.5 A 6 V 0.5 Ω 0.1 %
0.2 ms
10.5 A 1 6 V 1 0.1 Ω 1 0.1 % 1 0.1 ms
1
类型 DC, 或脉冲
Number of steps 1 to 100
000
Min programmable value to create list sweep waveform Minimum
10 μs with 1 μs resolution
Pre-defined waveforms
条件:Programmable frequency/timing resolution 1 μHz nominal (sine), 250 ns (waveforms other than sine)
1. ± 1 V, ± 10 V, ± 200 V, open load.
2. ± 10 mA 1 kΩ load, ± 100 mA 100 Ω load.
3. ± 1 V, ± 10 V, ± 180 V, open load.
4. ± 1 uA 100 kΩ load, ± 10 uA 100 kΩ load, ± 10 mA 100 Ω load.
Supported waveforms Sine, Square, Ramp, Triangle, Trapezoid and Exponential
Frequency
1 mHz to 10 kHz
Frequency accuracy of time base
± 50 ppm
Linearity (best-fit) Voltage Source ± 0.01 % 1, Current Source ± 0.01 %
2
THD Voltage Source -90 dB 3, Current Source -90 dB
4
User-defined waveforms
Waveform length 1 to 100
000 points
Sample rate 0.001 to 100 000 Sa/s
250 ns resolution
Storage Non-volatile memory and USB memory are both available. Non-volatile memory
can store one waveform with a length of up to 2500 points. USB memory can
store waveforms of up to 100k points.
电压源
条件:condition. Step is 10 % to 90 % range
Settling time Time required to reach within
0.1 % of final value at open load
200 mV, 2 V ranges <
50 μs
20 V range <
110 μs
200 V range <
700 μs
Noise 10 Hz to 20 MHz < 3 mVrms
20 V range, without external filter
V source overshoot < ± (0.1 % + 10 mV). Step is
10 % to 90 % range, resistive load
Voltage source range change overshoot ≤ 250 mV. 100 kΩ load
20 MHz bandwidth
六、电源调整率/负载调整率 Included · 电压源规格
条件:Load transient recovery time Time to recover to within the settling band following a load change.
1. At a load change to change the flowing current from +50 mA to +150 mA, 10 V voltage force, 20 V range, 1 A limit.
2. At a load change to change the flowing current from +100 mA to +900 mA, 10 V voltage force, 20 V range, 1.5 A limit.
Current change 100 mA 1 800 mA
2
Settling band ± 20 mV
± 20 mV
Time 10 μs
30 μs
电压范围
条件:Note: Slew rate and small signal bandwidth can be down to -20 % in maximum.
Load resistance 200 mV 2 V 20 V 200 V 1 mA 44 mV/μs, 28 kHz 57 mV/μs, 18 kHz 57 mV/μs, 28 kHz 57 mV/μs, 28 kHz 10 MΩ 10 mA 44 mV/μs, 28 kHz 360 mV/μs, 20 kHz 360 mV/μs, 17 kHz 360 mV/μs, 28 kHz
10 MΩ
100 mA 28 mV/μs, 28 kHz 28 mV/μs, 20 kHz 28 mV/μs, 28 kHz 57 mV/μs, 28 kHz
10 MΩ
1 A 25 mV/μs, 28 kHz 25 mV/μs, 28 kHz 25 mV/μs, 28 kHz
10 MΩ
1.5 A 36 mV/μs, 28 kHz 36 mV/μs, 18 kHz 36 mV/μs, 28 kHz
10 MΩ
3 A 27 mV/μs, 28 kHz 27 mV/μs, 28 kHz 27 mV/μs, 28 kHz
10 MΩ
建立时间
条件:condition. Step is 10 % to 90 % range
Time required to reach within
0.1 % of final value at open load
10 nA, 100 nA ranges <
10 ms
1 μA range <
500 μs
10 μA, 100 μA ranges <
250 μs
1 mA to 3 A ranges <
80 μs
I source overshoot < ± 0.1 % (< ± 0.3 % for 3 A range). Step is
10 % to 90 % range
resistive load
条件:Line regulation/load regulation Included in current source specifications.
Current source range change overshoot ≤ 250 mV/R load
20 MHz bandwidth
电压范围
条件:Note: Slew rate and small signal bandwidth can be down to -20 % in maximum.
Load resistance 200 mV 2 V 20 V 200 V 1 mA 94 μA/μs, 21 kHz 160 μA/μs, 21 kHz 160 μA/μs, 21 kHz 150 μA/μs, 21 kHz 100 Ω 10 mA 94 μA/μs, 21 kHz 670 μA/μs, 21 kHz 900 μA/μs, 21 kHz 900 μA/μs, 21 kHz
100 Ω
100 mA 8 mA/μs, 10 kHz 8 mA/μs, 10 kHz 8 mA/μs, 10 kHz 12 mA/μs, 21 kHz
1 Ω
1 A 78 mA/μs, 12 kHz 94 mA/μs, 12 kHz 92 mA/μs, 12 kHz
0.1 Ω
1.5 A 125 mA/μs, 12 kHz 135 mA/μs, 12 kHz 140 mA/μs, 12 kHz
0.1 Ω
3 A 250 mA/μs, 13 kHz 270 mA/μs, 13 kHz 260 mA/μs, 13 kHz
0.041 Ω
Programmable output resistance
1
In its default state The B2961C/B2962C behaves like either an ideal voltage source with a negligibly small
source resistance or an ideal current source with a huge source resistance. The programmable output
resistance feature allows you to specify either a particular output resistance or a specific voltage versus
current source characteristic. This feature is ideal for emulating a wide variety of devices (such as
batteries, photovoltaic cells, sensors, transducers, etc.) that are otherwise difficult to simulate. Emulation
mode allows you to program a non-linear resistance. You specify the desired voltage/current
Series 电阻 (Rs) · 电压源
- (Load Resistance/2) ≤ Rs ≤ Load Resistance, for resistive load
Rs ≤ 25 Ω at 3 A range, ≤ 100 Ω at 1 A and 1.5 A ranges, ≤ 1 kΩ at 100 mA range, or ≤
10
Shunt 电阻 (Rsh) · 电流源
Load Resistance ≤ Rsh ≤
2 GΩ, for resistive load
Rsh ≥ 10 MΩ at 10 nA and 100 nA ranges, ≥
1 M Ω at other ranges
Rsh can be limited by capacitive load
条件:1. Programmable output resistance is only available for DC output.
Max number of points in Emulation mode
16 (piecewise linear interpolation between points)
高电容模式
条件:than 0.01 μF. In high capacitance mode the maximum allowed load capacitance value is 50 μF.
The high capacitance mode supports sources and measurements when the load capacitance is greater
Voltage output settling time Time required to reach within
0.1 % of final value with 4.7 μF capacitive
load on a fixed range at specified current range and limit value
200 mV, 2 V ranges
600 μs, at 1 A limit
20 V range
1.5 ms, at 1 A limit
200 V range
20 ms, at 100 mA limit
Current measurement settling time Time required to reach within
0.1 % of final value after voltage source is
stabilized on fixed range. Vout is
5 V unless noted.
1 μA range
230 ms
10 μA, 100 μA ranges
23 ms
1 mA, 10 mA ranges
0.23 ms
100 mA to 3 A ranges
100 μs
Mode change delay Delay into high cap mode 1 μA range 230 ms 10 μA, 100 μA ranges
23 ms
1 mA to 3 A ranges
1 ms
延迟 out 高 cap 模式
条件:High capacitance mode working conditions
All ranges
10 ms
Noise 10 Hz to 20 MHz (20 V range)
4.5 mVrms
Voltage source range change overshoot (20 V range or below)
< 250 mV
20 MHz bandwidth
V/I 模式电压源模式仅
条件:Range Current measurement range is limited to fixed range only. 10 nA and 100 nA ranges are not available.
Current limit ≥
1 μA
七、外部低噪声滤波器补充信息
条件:an accessory. They connect to the banana jack outputs of each B2961C/B2962C channel.
The B2961C/B2962C supports dedicated external low-noise filters; they are available as an option or as
High current ultra low noise filter (N1298A)
Maximum output range
21 V / 500 mA (DC)
输出连接器 BNC
条件:Output/residual resistance 10 Ω nominal (2-wire), 0.3 Ω nominal (4-wire. 4-wire connected inside of filter)
Small signal bandwidth 23 Hz nominal (2-wire), 8 Hz nominal (4-wire)
Source noise Voltage
0.1 to 10 Hz Same as voltage specification
10 to 20 MHz 10 μVrms
1nVrms√Hz at 10 kHz (20 V / 100 mA
range
50 Ω load)
输出连接器 BNC · 电流 0.1 至 10 Hz Same as 电流规格
条件:Load transient recovery time Time to recover to within the settling band following a load change.
1. Time required to reach within 0.1 % of final value at open load condition. Step is 10 % to 90 % range. At 20 V range, 500 mA
2. Time required to reach within 0.1 % of final value at short condition. Step is 10 % to 90 % range. At 500 mA (1 A) range, 20 V
3. At a load change to change the flowing current from +10 mA to +260 mA, 10 V voltage force, 20 V range, 500 mA limit.
10 to 1 MHz 8 μArms (20 V/1 A range
2 Ω load)
Source setting time Voltage 1 80 ms (2-wire)
140 ms (4-wire)
Current 2 11 ms (2-wire)
150 ms (4-wire)
Current change 250 mA
3
Settling band
± 20 mV
Time 50 ms (2-wire)
85 ms (4-wire)
Supported ranges Voltage
200 mV to 200 V ranges (21 V maximum)
Current
1 mA to 1 A ranges (500 mA maximum)
Maximum capacitive load 50 μF (for
4-wire)
Dimensions 41 mm H x 58.2 mm W x 141.5 mm D (When the filter is inserted to the output
connector of B2961C/B2962C, the depth is
126.5 mm.)
Weight
0.3 kg
limit/1 A range.
limit/20V range.
条件:• The 10 A pulse range and programmable output resistance capability are not supported by external filters.
• For the current output, only DC is supported when using with external filters.
• The current measurement data monitored by the built -in voltage/current monitor can be influenced by the charge and discharge
电流电容 inside 滤波器
Ultra low noise filter (N1298B)
Maximum output range
42 V / 105 mA (DC)
输出连接器 BNC
条件:Output/residual resistance 50 Ω nominal (2-wire), 0.3 Ω nominal (4-wire. 4-wire connected inside of filter)
Small signal bandwidth 23 Hz nominal (2-wire), 8 Hz nominal (4-wire)
Source noise Voltage
0.1 to 10 Hz Same as voltage specification
10 to 20 MHz 10 μVrms
1 nVrms√Hz at 10 kHz (20 V / 100
mA range
50 Ω load)
输出连接器 BNC · 电流 0.1 至 10 Hz Same as 电流规格
条件:Load transient recovery time Time to recover to within the settling band following a load change.
1. Time required to reach within 0.1 % of final value at open load condition. Step is 10 % to 90 % range. At 20 V range, 100 mA
2. Time required to reach within 0.1 % of final value at short condition. Step is 10 % to 90 % range. At 100 mA range, 20 V
3. At a load change to change the flowing current from +10 mA to +60 mA, 10 V voltage force, 20 V range, 100 mA limit.
10 to 1 MHz 300 nArms (20 V/100 mA range
10 Ω load)
Source setting time Voltage 1 80 ms (2-wire)
140 ms (4-wire)
Current 2 11 ms (2-wire)
150 ms (4-wire)
Current change 50 mA
3
Settling band
± 20 mV
Time 50 ms (2-wire)
85 ms (4-wire)
Supported ranges Voltage
200 mV to 200 V ranges (42 V max)
Current
10 μA to 100 mA ranges (105 mA max)
Maximum capacitive load 50 μF (for
4-wire)
Dimensions 41 mm H x 58.2 mm W x 141.5 mm D (When the filter is inserted to the output
connector of B2961C/B2962C, the depth is
126.5 mm.)
Weight
0.3 kg
limit/100 mA range.
limit/20V range.
条件:• The 10 A pulse range and programmable output resistance capability are not supported by external filters.
• For the current output, only DC is supported when using with external filters.
• The current measurement data monitored by the built -in voltage/current monitor can be influenced by the charge and discharge
电流电容 inside 滤波器
Figure
22. HC-ULNF and ULNF provide excellent noise density performance
1.00E-10
1.00E-09
1.00E-08
1.00E-07
1.00E-06
1.00E-05
1.0E+00 1.0E+01 1.0E+02 1.0E+03 1.0E+04 1.0E+05 1.0E+06
1.0E+07
Noise Density [Vrms/√Hz]
条件:Output/residual resistance 0.3 Ω nominal (2-wire)
Small signal bandwidth 2 kHz nominal (1 A and 3 A ranges), 800 Hz nominal (100 mA range)
Frequency [Hz] 20 V Range
2 V Range
Low noise filter (N1298C)
Maximum output range
210 V/3 A (DC)
Output connector Banana
2-wire/4-wire
Source noise Voltage
0.1 to 10 Hz Same as voltage specification
10 to 20 MHz 350 μVrms (20 V/1.5 A range
50 Ω load)
噪声 Density [Vrms/√Hz] · 电流 0.1 至 10 Hz Same as 电流规格
条件:Load transient recovery time Time to recover to within the settling band following a load change.
1. Time required to reach within 0.1 % of final value at open load condition. Step is 10 % to 90 % range. At 20 V range, 1.5 A
2. Time required to reach within 0.1 % of final value at short condition. Step is 10 % to 90 % range. At 1.5 A range, 20 V limit /20V
range. 3. At a load change to change the flowing current from +100 mA to +900 mA, 10 V voltage force, 20 V range, 1.5 A limit.
10 to 1 MHz 450 μArms (20 V/1.5 A range
0.67 Ω load)
Source setting time Voltage
640 μs (2-wire/4-wire)
Current
1.2 ms (2-wire/4-wire)
Current change 800 mA
3
Settling band
± 20 mV
Time 450 μs (2-wire)
650 μs (4-wire)
Supported ranges Voltage
200 mV to 200 V ranges (210 V max)
Current
10 μA to 3 A ranges (3 A max)
Maximum capacitive load
1 mF
Dimensions 41.5 mm H x 58.2 mm W x 127.5 mm D (When the filter is inserted to the
output connector of B2961C/B2962C, the depth is
112.5 mm.)
Weight
0.25 kg
limit/1.5 A range.
条件:• The 10 A pulse range and programmable output resistance capability are not supported by external filters.
• For the current output, only DC is supported when using with external filters.
• The current measurement data monitored by the built -in voltage/current monitor can be influenced by the charge and discharge
以上指标摘自厂家官方数据手册,完整定义、测试条件与保证值口径以手册为准。完整指标、测试条件与定义口径请见产品页「软件和手册 | 白皮书」栏目中的官方数据手册。
是德科技 | KEYSIGHT · onetest 仪器资源库
全部

 

是德科技官方渠道


官方渠道(官网 / 热线 / 邮箱)


• 销售服务热线

800-810-0189(座机)/400-810-0189(手机) 工作时间 周一至周五 8:30-17:30


• 热线传真

800-820-2816(座机)/400-820-3863(手机)


• 亚洲区支持邮箱 tm_asia@keysight.com


• 服务与支持邮箱

instruments_services@keysight.com


• 官网

www.keysight.com(中国站 www.keysight.com.cn)


全国办事处


• 北京总部

是德科技(中国)有限公司 北京市朝阳区望京北路3号

电话:(010) 64397888

传真:(010) 64390278

邮编:100102


• 上海分公司

上海市虹口区四川北路1350号中信泰富申虹广场5楼、16-19楼

电话:(021) 36127688

传真:(021) 36127188

邮编:200080


• 广州分公司

广州市天河北路233号中信广场66层07-08室

电话:(020) 38113988

传真:(020) 86695074

邮编:510613


• 深圳分公司

深圳市福田中心区福华一路六号免税商务大厦3楼

电话:(0755) 83079588

传真:(0755) 82763181

邮编:518048


• 成都分公司

成都高新区南部园区天府四街116号

电话:(028) 83108888

传真:(028) 85330830

邮编:610041


• 西安分公司

西安市碑林区南关正街88号长安国际大厦D座5/F

电话:(029) 88867770

传真:(029) 88861330

邮编:710068


• 中国香港

是德科技香港有限公司 中国香港北角电气道169号25楼

电话:(852) 31977777

传真:(852) 25069292 香港热线 800-938-693


• 维修 / 校准服务中心

中国大陆 北京 / 成都 / 苏州 服务热线 800-810-0189 / 400-810-0189


授权分销商


• 上海信果电子科技有限公司(上海)

上海市沪闵路8075号虹梅商务大厦6楼609室

邮编:200233

电话:021-64518399

传真:021-54560890

邮箱:jason.wu@signalgroup.com.tw

官网:www.signalgroup.com.cn


• 上海精测电子有限公司(上海)

上海市北京东路668号西楼15E

邮编:200001

电话:13916371522

传真:021-53086102

邮箱:yangzhen@jingce.com

官网:www.jingce.com


• 北京东方中科集成科技股份有限公司(北京)

北京市海淀区复兴路69号院12号楼2层、7层 邮政编码:100039

邮编:100039

电话:400-650-5566

传真:010-68728001

邮箱:zhangzp@oimec.com.cn

官网:www.dfzk.com/br_keysight.html


• 北京千聚科技发展有限公司(北京)

北京市海淀区西三旗花园雪梨澳乡A区23-4号

邮编:100085

电话:010-82907162

邮箱:zhuqihui@qianjukeji.com.cn

官网:www.qianju.net.cn


• 北京金龙翌阳科技发展有限公司(北京)

北京市海淀区大柳树路17号富海大厦2001室

邮编:100086

电话:010-62167379/6213538

邮箱:zhy@yy17.com

官网:www.yy17.com


• 厦门同昌源电子有限公司(厦门)

厦门市湖里区悦华路215号综合楼二楼C单元

邮编:361000

电话:0592-5663715

传真:0592-2236795

邮箱:tcydz@xmtcy.com

官网:www.xmjns.com


• 合肥新普仪测科技有限公司(合肥)

安徽省合肥市长江路53号长江大厦1102室

邮编:230001

电话:+86(0551)65177518 ext:

传真:+86(0551)6260 7155

邮箱:hfsimple@mail.hf.ah.cn

官网:www.hfxp.com.cn


• 品展国际贸易(上海)有限公司(上海)

上海外高桥保税区泰谷路18号1号楼1105A室

邮编:200003

电话:+86(0512) 6808 6023

传真:+86(0512) 6808 6025

邮箱:melody@chtek.com.tw

官网:chtek.com.tw


• 广州康祺科技发展有限公司(广州)

广州市天河区华强路1号珠控国际中心8层06单元

邮编:510623

电话:020-38295200

传真:020-38295122

邮箱:baobao@kontchi.com

官网:www.kontchi.com


• 广州科欣仪器有限公司(广州)

广州市黄埔区黄埔大道933号209室

邮编:510700

电话:86-20-38699788

传真:86-20-34395932

邮箱:cs@gzkexin.com.cn

官网:www.gzkexin.com.cn


• 成都安诚迅飞电子科技有限公司(成都)

成都市武侯区人民南路四段27号1栋1单元 24层3号

邮编:610041

电话:028-86027579

邮箱:jincai.he@ancentest.com

官网:www.ancentest.com


• 新亚制程(浙江)股份有限公司(深圳)

深圳市福田区中康路卓越城梅林中心广场(北区)一期1栋3楼

邮编:518035

电话:0755-23818536

传真:0755-23818625

邮箱:wangrongbin@sunyes.cn

官网:www.sunyes.cn


• 无锡市邦达测量科技有限公司(无锡)

江苏省无锡市新区长江北路112号

邮编:214028

电话:0510-85258521 ext:

邮箱:bdyiqi@bdyiqi.com

官网:www.bdyiqi.com


• 武汉力德仪测科技有限公司(武汉)

武汉市光谷大道54号国际企业中心四期A座501室

邮编:430074

电话:027-85481090 ext:

邮箱:liuyang@leader-e.com

官网:www.leader-e.com


• 苏州工业园区贝奇仪器有限公司(苏州)

苏州工业园区通园路398号海逸大厦A402室

邮编:215006

电话:0512-62883832

邮箱:szbeiqi@szbeiqi.net

官网:www.szbeiqi.net


• 青岛鲁芯仪器有限公司(青岛)

青岛市福州北路135号鼎都1号写字楼328室

邮编:266007

电话:15953279543

传真:0532-80669058-830

邮箱:gaochangyuan@qdluxin.com

官网:www.qdluxin.com


• Avnet Electronics Marketing(Phoenix)

2211 South 47th Street

邮编:85034

电话:+65 6289 9164

邮箱:Josephine.Cheong@avnet.com

官网:OnlineSupportAsia@Avnet.com


• RFMW, Ltd.(San Jose)

188 Martinvale Lane

邮编:95119

电话:#09-129

邮箱:sales@rfmw.asia

官网:www.rfmw.com


• 沈阳实拓科技有限公司(沈阳)

沈阳市和平区三好街35号8层

邮编:110004

电话:024-23843636

传真:024-23905232

邮箱:lf@shituokeji.cn

官网:www.shituokeji.cn


• 領先科儀有限公司(香港)

新界荃灣海盛路3號TML廣場21樓B5室

邮编:.

电话:852-31523600

传真:852-31523608

邮箱:allenma@advanceinst.com

官网:www.advanceinst.com


租赁合作伙伴


• 深圳君鉴科技股份有限公司(深圳市)

光明街道观光路华强创意产业园3栋B座12楼光明新区

邮编:518107

电话:400-860-3035

邮箱:shichang@chrent.com

官网:www.chrent.com


• 益莱储(北京)检测设备租赁有限公司(北京市)

来广营高科技产业园区4号楼3层301朝阳区

邮编:100102

电话:400-819-2800

邮箱:jim.chen@electrorent.com

官网:www.electrorent.com/cn


• 北京东方中科集成科技股份有限公司科技租赁事业部(北京市)

北京市海淀区阜成路67号银都大厦12层

邮编:100142

电话:400-650-5566

传真:010-68728001

邮箱:wangml@oimec.com.cn

官网:www.dfzk.com/rent


• 客而禧设备租赁(上海)有限公司(Shanghai)

徐汇区古美路1515号19号楼903室

邮编:201102

电话:021-54453166

邮箱:krc@krcchina.com

官网:www.krcchina.com


• 深圳市瑞普高电子有限公司(深圳市)

天安云谷产业园一期3栋D座1505-1506龙岗区

邮编:518129

电话:0755-29050100

邮箱:rickluo@ruipugao.com

官网:www.ruipugao.com


• 苏州锦凡精密仪器科技有限公司(苏州)

苏州市高新区滨河路625号创业大厦5幢505

邮编:215011

电话:18914031336

邮箱:18914031336@jfsz.net


解决方案合作伙伴


• Tokyo Weld Co., Ltd.(Ota-ku)

2-28-1 Kitamagome

邮编:143-0021

电话:81-3-3775-4331

传真:81-3-3775-4359

邮箱:d-imai@tokyoweld.com

官网:www.tokyoweld.com


• 上海恒榉电子科技有限公司(Shanghai)

上海市奉贤区南桥镇西闸公路1036号3栋2层

邮编:201401

电话:18112779808

邮箱:salesvalue@everise-hj.com

官网:everise-hj.com


• 佳燁科技股份有限公司(Ghiatek)(桃園市龜山區)

光明街243巷2號

邮编:33372

电话:+886-3-350-9960

传真:+886-3-320-3475

邮箱:support@ghiatek.com

官网:www.ghiatek.com.tw


• 华美博科技(北京)有限公司(北京市)

蓝靛厂东路2号金源时代商务中心C座9A2海淀区

邮编:100097

电话:010-88598732

邮箱:sino@sino-microtech.com

官网:www.sino-microtech.com


• 和创联合科技(北京)有限公司(北京市)

中关村东路18号财智国际大厦A座1612海淀区

邮编:100083

电话:400 650 7802

邮箱:info@hisuntest.com

官网:www.hisuntest.com


• 昆山捷得立电子有限公司(昆山市)

登云路288号海创大厦C座25楼

邮编:215316

电话:0512-36831748

邮箱:sales@jiedeli-china.com

官网:www.jiedeli-china.com


• 深圳市捷泰普科技有限公司(深圳市)

宝安区西乡街道前进二路桃源居南面深圳市智汇创新中心A座216室

邮编:518126

电话:0755-83908488

邮箱:sales@jtptech.cn

官网:www.jtptech.cn


• 深圳市易捷测试技术有限公司(深圳市)

福虹路9号世贸广场C座1203室福田区

邮编:518033

电话:0755-83698930

邮箱:dongni.zhang@gbit.net.cn

官网:gbit.net.cn


• 深圳市泰仕捷科技有限公司(深圳市)

松岗大道7号汉海达大厦616室宝安区

邮编:518105

电话:0755-27128586

邮箱:riky.gua@tesijet.com

官网:www.tesijet.com


• 深圳市蓉声科技有限公司(深圳市)

福中路海连大厦连天阁 1103 室福田区

邮编:518033

电话:13828880571

邮箱:jiang.qian@radiation-test.com

官网:www.radiation-test.com


• 苏州伊欧陆系统集成有限公司(苏州)

星湖街218号生物纳米园A7楼305室苏州工业园区

邮编:215000

电话:4008808776

邮箱:info@eoulu.com

官网:www.eoulu.com


• EM Labs Inc.(Kobe)

1-4-13 Mizukasadori, Nagata

邮编:653-0842

电话:+81-50-5370-0262

邮箱:info@emlabs.jp

官网:www.emlabs.jp


• MPI Corporation(Chupei)

No. 155 Chungho Street

邮编:302

电话:+886-3-555-1771

传真:+886-3-551-8381

邮箱:info@mpi-corporation.com

官网:www.mpi-corporation.com/ast


• NOFFZ(Tönisvorst)

Vorster Strasse 238

邮编:47918

电话:+49 2151-99878-0

邮箱:info@noffz.com

官网:www.noffz.com


• Power Technology Solutions(Santa Clara)

3048 Scott Blvd

邮编:95054

电话:650-308-8091 ext:

传真:408-727-0827

邮箱:inquiries@pwrts.com

官网:www.pwrts.com


• Resillion(Hasselt)

Kempische Steenweg 303

邮编:3500

电话:+32 498 92 01 71

邮箱:global-ci-sales@resillion.com

官网:www.resillion.com


• Suzhou Link Ways Tech Co., Ltd.(Suzhou)

16F, Block B, Jin Shi Wang Hu Building, No. 18, Jia Rui alley, SIP

邮编:215021

电话:+86 512 6602 8998


• 上海凌测电子科技有限公司(上海)

峨山路91弄120号陆家嘴软件园8号楼401A室浦东新区

邮编:200127

电话:021-61090608

邮箱:yue.lin@merlintest.com.cn

官网:www.merlintest.com.cn


• 上海北汇信息科技有限公司(上海市)

秀路100号虹桥总部1号4号楼3C闵行区紫

邮编:201103

电话:021-34716271

邮箱:info@polelink.com

官网:polelink.com


• 上海怿星电子科技有限公司(上海市)

钦州北路1199号智汇园87号楼5F室徐汇区

邮编:200233

电话:021-64955659

邮箱:biz@e-planet.cn

官网:www.e-planet.cn


• 东昇电磁兼容技术(深圳)有限公司(深圳市)

福田中心区26-3路中国凤凰大厦2栋25G

邮编:518026

电话:0755-82792411

邮箱:sales@jstoyo.cn

官网:www.jstoyo.cn


• 南京派格测控科技有限公司(南京市)

建邺区建邺人才服务大厦16楼

邮编:210019

电话:4008920858

邮箱:sales@pgtec.cn

官网:pgtec.cn


• 南京纳特通信电子有限公司(南京市)

江宁开发区临淮街20号

邮编:210012

电话:025-84471796

邮箱:sales@rflight.cn

官网:www.rflight.cn


• 深圳市研辰科技有限公司(深圳市)

益田路3008号皇都广场C座2815室福田区

邮编:518048

电话:0755-82828703

邮箱:roger_huang@ascentest.com

官网:www.ascentest.com


原厂翻新与二手仪器


• 是德科技原厂二手仪器商城(Keysight Certified Pre-Owned):www.keysight.com/used/cn/zh/


• 原厂翻新仪器经与新品相同的最终测试与校准,原厂保修最长 5 年;享 40%–90% 折扣,另有线上 5% / 教育 15% 优惠


 

0条提问

X

提问

X

回答

暂无视频

 

0条口碑
X

发表口碑

口碑标题
口碑
上传图片

ONETEST仪器资源库

联系电话:+86-755-23033660

电子邮箱:info@onetest.cn

Onetest仪器资源库

公众号

Onetest仪器资源库

视频号

Onetest仪器资源库

bilibili

Onetest仪器资源库

小助手

© 2026 Onetest仪器资源库 All Rights Reserved   粤ICP备17028186号-2      粤公网安备44030902003758

AI问答