ONETEST 欢迎您

厂商登录 | 入驻

登录 | 注册 购物车 微信公众号
请完成安全验证

类似产品

同厂商产品

U5040BSCB 网络测试仪|是德科技

U5040BSCB 网络测试仪|是德科技 (在产)

产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案

是德科技|KEYSIGHT
用于 O-RU 测试与验证的 Open RAN Studio
从前传验证到端到端 RAN 测试
产品简介
Open RAN Studio 包含强大的 O-RAN 专用工具,可在以太网前传接口上构建、播放、捕获和测量 O-RAN 流量。可选的 IQ 矢量提取功能支持使用 Keysight 89600 VSA 软件进行调制分析
核心参数
• 仿真子系统:O-Gnb, O-DU
• 测试类型:O-RU fronthaul
• 支持接口:OFH
功能特性
• 产品亮点
支持 split option 7.2x(O-RU 类别 A 和 B)、符合规范的激励生成和响应分析,
以及通过 10 Gbps / 25 Gbps / 50 Gbps(前传)以太网接口对 O-RAN 流量进行测量
全自动生成基于以太网的 O-RAN 控制面、用户面、管理面和同步面消息,
采用符合 ORAN-WG4.CUS.0-v13.00 和 O-RAN.WG4.MP.0-R003-v13.00 的 eCPRI 传输封装类型
开箱即与 Keysight 信号生成以及用于 5G NR 和 LTE 标准的 VSA 软件集成
快速配置和生成符合 5G NR 和 LTE 单载波或多载波的 FDD 和 TDD 波形
实时 FrameID 生成和 CRC 计算
分析 FR1 和 FR2 无线电下行链路(DL)和上行链路(UL)路径
配置 O-RAN Section 类型和 Section 扩展
支持波束赋形
支持 M 平面配置
捕获 O-RAN 响应并精确打时间戳
对 O-RAN 跟踪进行可视化展示和完整解码,并支持基于流的过滤
Open RAN Studio 支持激励信号创建,可轻松捕获、
提取和导出 IQ 矢量——用于对接收到的 RF / 毫米波信号进行高级调制分析,以测试 O-RU 性能。
与 Keysight 频谱分析仪和信号源结合使用时,
集成的 Open RAN Studio 解决方案可提供业界最全面的跨域、
多通道 RF / 毫米波和 O-RAN 协议测量,适用于 FR1 和 FR2 无线电、
下行链路(DL)和上行链路(UL)路径
资源下载
以上内容与指标均取自是德科技(KEYSIGHT)官网该产品详情页与官方产品资料,未标注口径的为厂家公布值。
是德科技|KEYSIGHT · onetest 仪器资源库

 

 

是德科技 | KEYSIGHT
U5040BSCB 网络测试仪 详细指标
From fronthaul validation to end-to-end RAN testing
一、Fronthaul Conformance and Interoperability Test Specifications
Open RAN Studio for O-RAN Radio Unit (O-RU) Testing
Open RAN Studio provides a test environment that includes and
integrates with Keysight tools, in both RF and Protocol Domains, to help
you completely exercise an O-RAN CUS compliant Radio Unit (O-RU).
To ensure measurement consistency between both RF and Baseband
sides of the O-RU, Open RAN Studio software leverages the same
5G
signal generation and measurement science used in Keysight spectrum
analyzers and signal sources. This tight coupling ensures CU-plane
messages and baseband information match exactly with the signals
captured on the RF side of the Radio Unit
条件:necessary to characterize the power and modulation performance of your components and transmitters.
Easily manipulate a variety of signal parameters to simplify signal creation.
Signal Studio Pro for 5G NR
2020, ORAN (N7631ORNC)
Keysight Signal Studio Pro for 5G NR software is a flexible signal creation tool that helps significantly
reduce the time spent on signal simulation. Quickly and easily generate
5G NR signals for component
transmitter and receiver test. Its user-friendly interface lets you configure signal parameters, calculate the
resulting waveforms, and download .SCP files – for generation with Open RAN Studio Builder or for
analysis using Keysight
89600 Vector Signal Analysis software.
N7631C PathWave Signal Studio Pro for 5G NR enables you to generate various
5G NR signals
• Quickly configure and generate
5G NR test models
Factor Reduction
条件:• Baseband filter and windowing for spectrum control to improve the out-of-band performance.
equipment (for example, Keysight signal generators, oscilloscopes or spectrum analyzers).
• Support test model presets for FR1 and FR2.
With a split option
7.2x, O-RUs
must implement the lower layer part of the
3GPP protocol stack
Open RAN Studio helps you debug, characterize, validate and test both
RF performance and functional operation of your next generation
LTE / 5G NR Radio Unit.
Open RAN Studio Player hardware features triggering and reference clock in / out capabilities, enabling synchronization with external test
Figure 2: Signal Studio Pro
5G NR Channel Setup
Open RAN Studio Builder for O-RAN
条件:based O-RAN messages from a distributed unit to the device being tested – the O-RU (Radio Unit).
protocol test vectors, including complete and consistent C-plane and U-plane messages, ready for playout.
Keysight Open RAN Studio Builder lets you quickly, easily, and reliably generate O-RAN test vectors
compliant with the ORAN-WG4.CUS.0-v02.00 specification. The generated test vectors represent Ethernet
Open RAN Studio Builder is integrated with PathWave Signal Studio Pro for 5G NR (N7631ORNC) to
create 3GPP NR standard-compliant signals and construct the corresponding Ethernet based O-RAN
• Fully automated generation of Ethernet based
O-RAN CU-plane messages with eCPRI transport encapsulation types. (ORAN-WG4.CUS.0-v02.00 Section 3.1, 3.2
3.4)
• Predefined
3GPP test Patterns.
• Uplink stimulus test generation (C-plane)
• Multi-carrier support (up to 16 carriers).
• Generates a PCAP Next Generation based stimulus file for use with Open RAN Studio
Player or Explorer
条件:constructed to fully represent the allocations defined in the 5G NR signal definition, and the U-plane
Uplink test vectors include only C-plane messages, as U-plane messages will be generated by the DUT.
Downlink test vectors include both O-RAN C-plane and U-plane messages. C-plane messages are
messages include frequency domain IQ for each resource block.
To ensure consistency, the C-plane messages match with the uplink test signal generated by Keysight
信号源
Figure
3: Open RAN Studio Builder C-Plane Setup
Open RAN Studio Player for O-RAN
条件:Interface Module loaded with the Keysight Open RAN Player FPGA build (BittWare XUP-P3R).
The Open RAN Studio Player software and integrated hardware appliance will playback Open RAN Studio
Builder generated stimulus files to an O-RU Radio Unit over an Ethernet based O-RAN interface. The
Open RAN Studio Player emulates and is seen by the DUT (O-RU) as an Open RAN DU. The Keysight
Open RAN Studio Player application is provided for use on a third-party
1RU Server Appliance (BittWare
TeraBox 1000S Server) running the Windows
10® Operating System and equipped with a specific FPGA
• 10 Gbps to 25 Gbps Ethernet interface.
• SFP or QSFP support (quad QSFP cage)
• 3 GByte stimulus memory depth.
To ensure compliant frame synchronization, the Open RAN Studio Player can also act as a PTP master
and ensure that O-RAN messages are played honoring specified timestamps – enabling positive and
Downlink Test Flow
Figure
4: Open RAN Studio Player Interface Monitor
Open RAN Studio Capture for O-RAN
条件:off as PCAP Next Generation compliant files for analysis in Open RAN Explorer or Wireshark.
The Open RAN Studio Capture appliance is integrated within the Open RAN Studio Player hardware
appliance. It captures both Tx and Rx information flows between the DUT and DU – acting as an
embedded protocol analyzer by passively extracting the information flows traveling over the Ethernet
based O-RAN interface. Open RAN Studio Capture is transparent to the network and sees the O-RAN
flows as an Open RAN DU would. Captured flows are stored in a circular capture buffer and can be save
• Continuous capture mode until full (last N frames)
• Full duplex capture capability. o Stimulus transmitted on the downlink o Uplink traffic from O-RU
Uplink Test Flow
Figure
7: PCAP file opened in Wireshark
Open RAN Studio Explorer for O-RAN
Radio Units combine O-RAN protocol operation with RF transmit and receive performance, creating new
test challenges. Analysis and validation of O-RU performance requires cross-domain measurements in
both RF and Protocol domains
With the optional Open RAN Studio IQ extractor, Open RAN Studio Explorer helps you visualize and fully
decode the captured trace and enables IQ centric extraction, which enables RF centric measurements
and vector analysis using Keysight
89600 Vector Signal Analyzer (VSA).
• Flow based Filtering: o Filter traces on a single carrier
条件:o IQ information embedded in PRBs can be extracted for RF modulation measurements using the 89600 Vector Signal Analyzer.
• IQ extraction (with optional U5040IQEA):
• PRB view: o Recovered IQ. o Constellation view
Figure
5: Open RAN Studio Explorer Interface Monitor
Figure 6: Open RAN Studio PRB decode view with corelated decode and IQ constellation
P a g e
PathWave
89600 VSA for 5G NR modulation analysis (89601BHNC)
The Keysight 89600 VSA software’s option
89601BHNC provides comprehensive analysis capabilities in
the frequency, time, and modulation domains for signals based on both 3GPP’s
5G NR specification
The software provides frequency-, time-, and modulation-domain analysis results in a single
measurement. By configuring result traces of spectrum, acquisition time, and NR specific modulation
quality traces and tables, engineers can identify overall signal characteristics and troubleshoot
intermittent error peaks or repeated synchronization failures.
Key Features
条件:• Frequency, time and modulation-domain analysis results in a single measurement.
• Modulation analysis of 5G New Radio (NR)
signals based on 3GPP Release
15.
• Modulation analysis based on the Verizon
5G specification.
• Demodulate up to 16 component carriers
simultaneously and view results side-by-side
• Analyze up to 8x8 MIMO for downlink and 4x4
MIMO for uplink
条件:• In-depth analysis and troubleshooting traces for deeper insight: o EVM vs. spectrum and time, constellation, transport layer decoding plus more.
89600 VSA software can open IQ extracted data
from the Open RAN Studio IQ Extractor to perform detailed modulation and vector analysis. 5G NR is among over 75 signal standards and modulation types supported by the
89600 VSA
software. The core software is a comprehensive set of tools for demodulation and vector signal analysis. These tools enable you to explore virtually every facet of a signal and optimize
even the most advanced designs. As you assess your design tradeoffs, the
89600 VSA helps you cut through the complexity
Figure 8: 5G NR modulation and vector analysis in Keysight
89600 VSA for 5G NR
P a g e
条件:investment by choosing options and software to enable your required tasks.
Configure your Open RAN Studio for O-RAN Radio Unit (O-RU) Testing Solution
Open RAN Studio is the most comprehensive solution for O-RU testing. Get the most out of your O-RAN
• Open RAN Studio Explorer
N7631ORNC (Required) Signal Studio Pro software for 5G NR signal creation
(PathWave Signal generation for U5040BSCA)
U5040IQEA (Optional) IQ Extraction Option for Open RAN Studio
(Requires
89601BHNC for analysis of extracted IQ files)
89601200C (Optional) PathWave
89600 VSA Software
(Basic vector signal analysis and hardware connectivity) 89601BHNC (Optional) 5G New Radio Modulation Analysis for 89600 VSA Software (Requires
89601200C base VSA software)
(Requires U5040IQEA for IQ extraction from O-RAN packets)
Open RAN Solution Third-Party Hardware
Keysight Open RAN Studio software is designed to operate with a specific third-party Windows®
10 Pro
Workstation based operating system
1RU server and FPGA hardware accelerated Ethernet acquisition
timing, and triggering hardware from BittWare (a Molex company).
BittWare 型号编号说明
TRBX-1000S-0001 (Required)
TeraBox
1U System (SuperMicro SC515)
Redundant PWS Chassis with Intel Xeon Bronze
3204
3 banks of 16GB DDR4-2666
1TB NVMe M.2
Board Kit: XUP-VV8/ XUP-VVH/ XUP-VVP/
XUP-VV4/XUP-P3R
SW-MS-WINDOWS10-PRO-WS Microsoft Windows
10 Pro Workstation
(Required with TRBX-1000S-0001)
XUPP3R-0121 (Required)
Quad QSFP
DIMM
16GB RDIMM
DIMM
16GB RDIMM
P a g e
条件:1. Choose Your Software Licensing and KeysightCare Software Support Subscriptions
Keysight offers a variety of flexible licensing options to fit your needs and budget. Choose your license term,
license type, and KeysightCare software support subscription.
Perpetual – Perpetual licenses can be used indefinitely
Time-based – Time-based licenses can be only be used through the term of the license
(6, 12
24, or 36 months license options available).
KeysightCare Software Support Subscriptions
Perpetual licenses are sold with a 12 (default), 24
36, or 60-
month software support subscription. Support subscriptions can
Selecting your license
条件:Step 3. Choose your license type: node-locked, transportable, USB portable, or floating.
Step 4. Depending on the license term, choose your support subscription duration.
For more information on Signal Studio and VSA software, or to configure your product and request a quote:
Contact your Keysight representative or authorized partner for more information or to place an order:
Step
1. Choose your software product (for example: U5040BSCA).
Step
2. Choose your license term: perpetual or time-based.
KeysightCare Software
条件:• Ensure your software is always current with the latest enhancements and measurement standards.
• Gain additional insight into your problems with live access to our team of technical experts.
• Stay on schedule with fast turnaround times and priority escalations when you need support.
Support Subscription provides peace of mind amid evolving technologies
二、开路 RAN Studio 规格和性能规格
Open RAN Builder Supported Standards and Performance Characteristics*
5G Waveform Input Type Supports Keysight Signal Studio .SCP file format
波形发生
Fully automated generation of Ethernet based O-RAN CU-plane messages with eCPRI transport encapsulation types (ORAN-WG4.CUS.0-v02.00 Section 3.1 , 3.2
3.4)
Predefined
3GPP test Patterns
Uplink stimulus 测试发生
Carrier Support Multi-carrier support (up to 8 carriers)
Numerology Single & Multiple numerology
Bandwidth Supports all
3GPP bandwidth schemes
Sub Carrier Spacing (SCS) Supports all
3GPP Sub Carrier Spacing (SCS) schemes
Configurable eAxC Parametric bit allocation according to: (ORAN-WG4.CUS.0-v02.00 Section
3.1.3.1.6)
Supports DL-SCH PRB allocations following Signal Studio configurations and assign section ID for each allocation
Supports DL DCI Channel PRB allocations following Signal Studio
Supports DL SS/BPCH Channel PRB allocations following Signal
Studio configurations and assign section ID for each allocation
Supports UL-SCH PRB allocations following Signal Studio configurations and assign section ID for each allocation
IQ Bit width, Compression, and Scaling
Configurable IQ bit width per stimulus file (ORAN-WG4.CUS.0-v02.00 Section
6.3.2)
Uncompressed IQ (ORAN-WG4.CUS.0-v02.00 Section
6.3.3.13)
Block floating point compression (ORAN-WG4.CUS.0-v02.00 Section
6.3.3.13 , Annex A.1)
Configurable IQ scaling (ORAN-WG4.CUS.0-v02.00 Section
6.1.3)
Single/Multiple static compression method(s) per stimulus file.
(ORAN-WG4.CUS.0-v02.00 Section 6.3.3.13
6.3.3.15)
Single/Multiple dynamic compression methods (udCompHdr) per stimulus file. Configured on a per eAxC ID basis. (ORAN-WG4.CUS.0-v02.00 Section 6.3.3.13
6.3.3.15)
Section Type
Section type #0 support
(ORAN-WG4.CUS.0-v02.00 Section
5.4.2)
Section type #1 support
(ORAN-WG4.CUS.0-v02.00 Section
5.4.2)
Section type #1 support – numPrBc support for >
255 blocks
Section type #3 – PRACH
(ORAN-WG4.CUS.0-v02.00 Section
5.4.2)
* There are no warranted specifications for the Open RAN Studio software applications or third-party hardware appliance
P a g e
Open RAN Studio Specifications and Performance Characteristics (continued)
三、Open RAN Builder Supported Standards and Performance Specifications
Predefined-beam Beamforming (ORAN-WG4.CUS.0-v02.00 Section
10.4.1)
Weight-based dynamic beamforming (ORAN-WG4.CUS.0-v02.00 Section
10.4.2)
Attribute-based dynamic beamforming (ORAN-WG4.CUS.0-v02.00 Section
10.4.3)
Timestamps DL time advance configuration (ORAN-WG4.CUS.0-v02.00 Section
2.3.1)
Transport (ORAN-WG4.CUS.0-v02.00 chapter
3)
Application layer fragmentation support (ORAN-WG4.CUS.0-v02.00 Section
3.5.1)
VLAN support (ORAN-WG4.CUS.0-v02.00 Section
3.4)
Ready to play test vectors
Consistent CU-plane messages (ORAN-WG4.CUS.0-v02.00 Section
5.2.1)
Timestamp support (nanosecond resolution)
Figure
9: Open RAN Studio Builder – Flow/eAxC configuration options
P a g e
Open RAN Studio Specifications and Performance Characteristics (continued)
四、Open RAN Explorer Supported Standards and Performance Specifications
Decompress block floating point IQ compressed
Decompress IQ from capture using static and dynamic compression
Constellation view
IQ Extraction (Requires U5040IQEA)
IQ information embedded in PRB can be extracted for RF modulation
measurement using Keysight
89600 Vector Signal Analyzer (VSA)
Output in .SCP format
Figure
10: Easily filter on a Flow/eAxC ID in Open RAN Explorer
P a g e
Open RAN Studio Specifications and Performance Characteristics (continued)
Open RAN Player/Capture (Hardware) Supported Standards and Performance Characteristics
Interface Single port
10 Gbps to 25 Gbps Ethernet interface
BittWare (XUPP3R-0121)
Xilinx Virtex UltraScale+ PCIe w/
4 RDIMMs with SEP
SFP or QSFP support (Quad QSFP Cage)
DIMM
16GB RDIMM
DIMM
16GB RDIMM
Timing: SEP Trigger board (ACC-XPR-SEPTRIG)
SEP Trigger Board - Ports
10 MHz clock in / 10 MHz clock out
Ethernet, VLAN, eCPRI and O-RAN
IEEE
1588 PTPv2 master (G.8275.1 profile)
PTPv2 Master emulation
Configurable to start playing frames on next
10 ms boundary
Memory Depth
Stimulus
3.5 GBytes before overhead
1 second or 100 radio frames captured at 25 Gbps
Triggering Trigger out signal generation on
10 ms frame boundaries
Reliability and Support
The Keysight Open RAN Studio test platform is designed for continuous
high reliability up-time applications such as manufacturing test. As with
all Keysight products, it is designed with the same quality standards and
it is supported by Keysight’s worldwide sales and support network.
Keysight’s Services organization is available for custom development
projects if desired
Open RAN studio API interface enables automated test applications. It
is designed to be integrated in rack mounted test systems with minimal
footprint, and be remotely controlled from a single controller, or from
P a g e
条件:please contact your local Keysight office. The complete list is available at:
For more information on Keysight Technologies’ products, applications or services,
This information is subject to change without notice. © Keysight Technologies, 2020 - 2025 , Published in USA, Feb ruary 18 , 202 5, 3120
-1115 .EN
Keysight
5G Solutions
Keysight’s 5G end-to-end design and test solutions enable the mobile industry to accelerate
5G
product design development from the physical layer to the application layer and across the entire
workflow from simulation, design, and verification to manufacturing, deployment, and
Keysight offers common software and hardware platforms compliant to the latest
3GPP
standards, enabling the ecosystem to quickly and accurately validate
5G chipsets, devices, base
stations and networks, as well as emulate subscriber behavior scenarios. Additional information
以上指标摘自厂家官方数据手册,完整定义、测试条件与保证值口径以手册为准。完整指标、测试条件与定义口径请见产品页「软件和手册 | 白皮书」栏目中的官方数据手册。
是德科技 | KEYSIGHT · onetest 仪器资源库
全部

 

是德科技官方渠道


官方渠道(官网 / 热线 / 邮箱)


• 销售服务热线

800-810-0189(座机)/400-810-0189(手机) 工作时间 周一至周五 8:30-17:30


• 热线传真

800-820-2816(座机)/400-820-3863(手机)


• 亚洲区支持邮箱 tm_asia@keysight.com


• 服务与支持邮箱

instruments_services@keysight.com


• 官网

www.keysight.com(中国站 www.keysight.com.cn)


全国办事处


• 北京总部

是德科技(中国)有限公司 北京市朝阳区望京北路3号

电话:(010) 64397888

传真:(010) 64390278

邮编:100102


• 上海分公司

上海市虹口区四川北路1350号中信泰富申虹广场5楼、16-19楼

电话:(021) 36127688

传真:(021) 36127188

邮编:200080


• 广州分公司

广州市天河北路233号中信广场66层07-08室

电话:(020) 38113988

传真:(020) 86695074

邮编:510613


• 深圳分公司

深圳市福田中心区福华一路六号免税商务大厦3楼

电话:(0755) 83079588

传真:(0755) 82763181

邮编:518048


• 成都分公司

成都高新区南部园区天府四街116号

电话:(028) 83108888

传真:(028) 85330830

邮编:610041


• 西安分公司

西安市碑林区南关正街88号长安国际大厦D座5/F

电话:(029) 88867770

传真:(029) 88861330

邮编:710068


• 中国香港

是德科技香港有限公司 中国香港北角电气道169号25楼

电话:(852) 31977777

传真:(852) 25069292 香港热线 800-938-693


• 维修 / 校准服务中心

中国大陆 北京 / 成都 / 苏州 服务热线 800-810-0189 / 400-810-0189


授权分销商


• 上海信果电子科技有限公司(上海)

上海市沪闵路8075号虹梅商务大厦6楼609室

邮编:200233

电话:021-64518399

传真:021-54560890

邮箱:jason.wu@signalgroup.com.tw

官网:www.signalgroup.com.cn


• 上海精测电子有限公司(上海)

上海市北京东路668号西楼15E

邮编:200001

电话:13916371522

传真:021-53086102

邮箱:yangzhen@jingce.com

官网:www.jingce.com


• 北京东方中科集成科技股份有限公司(北京)

北京市海淀区复兴路69号院12号楼2层、7层 邮政编码:100039

邮编:100039

电话:400-650-5566

传真:010-68728001

邮箱:zhangzp@oimec.com.cn

官网:www.dfzk.com/br_keysight.html


• 北京千聚科技发展有限公司(北京)

北京市海淀区西三旗花园雪梨澳乡A区23-4号

邮编:100085

电话:010-82907162

邮箱:zhuqihui@qianjukeji.com.cn

官网:www.qianju.net.cn


• 北京金龙翌阳科技发展有限公司(北京)

北京市海淀区大柳树路17号富海大厦2001室

邮编:100086

电话:010-62167379/6213538

邮箱:zhy@yy17.com

官网:www.yy17.com


• 厦门同昌源电子有限公司(厦门)

厦门市湖里区悦华路215号综合楼二楼C单元

邮编:361000

电话:0592-5663715

传真:0592-2236795

邮箱:tcydz@xmtcy.com

官网:www.xmjns.com


• 合肥新普仪测科技有限公司(合肥)

安徽省合肥市长江路53号长江大厦1102室

邮编:230001

电话:+86(0551)65177518 ext:

传真:+86(0551)6260 7155

邮箱:hfsimple@mail.hf.ah.cn

官网:www.hfxp.com.cn


• 品展国际贸易(上海)有限公司(上海)

上海外高桥保税区泰谷路18号1号楼1105A室

邮编:200003

电话:+86(0512) 6808 6023

传真:+86(0512) 6808 6025

邮箱:melody@chtek.com.tw

官网:chtek.com.tw


• 广州康祺科技发展有限公司(广州)

广州市天河区华强路1号珠控国际中心8层06单元

邮编:510623

电话:020-38295200

传真:020-38295122

邮箱:baobao@kontchi.com

官网:www.kontchi.com


• 广州科欣仪器有限公司(广州)

广州市黄埔区黄埔大道933号209室

邮编:510700

电话:86-20-38699788

传真:86-20-34395932

邮箱:cs@gzkexin.com.cn

官网:www.gzkexin.com.cn


• 成都安诚迅飞电子科技有限公司(成都)

成都市武侯区人民南路四段27号1栋1单元 24层3号

邮编:610041

电话:028-86027579

邮箱:jincai.he@ancentest.com

官网:www.ancentest.com


• 新亚制程(浙江)股份有限公司(深圳)

深圳市福田区中康路卓越城梅林中心广场(北区)一期1栋3楼

邮编:518035

电话:0755-23818536

传真:0755-23818625

邮箱:wangrongbin@sunyes.cn

官网:www.sunyes.cn


• 无锡市邦达测量科技有限公司(无锡)

江苏省无锡市新区长江北路112号

邮编:214028

电话:0510-85258521 ext:

邮箱:bdyiqi@bdyiqi.com

官网:www.bdyiqi.com


• 武汉力德仪测科技有限公司(武汉)

武汉市光谷大道54号国际企业中心四期A座501室

邮编:430074

电话:027-85481090 ext:

邮箱:liuyang@leader-e.com

官网:www.leader-e.com


• 苏州工业园区贝奇仪器有限公司(苏州)

苏州工业园区通园路398号海逸大厦A402室

邮编:215006

电话:0512-62883832

邮箱:szbeiqi@szbeiqi.net

官网:www.szbeiqi.net


• 青岛鲁芯仪器有限公司(青岛)

青岛市福州北路135号鼎都1号写字楼328室

邮编:266007

电话:15953279543

传真:0532-80669058-830

邮箱:gaochangyuan@qdluxin.com

官网:www.qdluxin.com


• Avnet Electronics Marketing(Phoenix)

2211 South 47th Street

邮编:85034

电话:+65 6289 9164

邮箱:Josephine.Cheong@avnet.com

官网:OnlineSupportAsia@Avnet.com


• RFMW, Ltd.(San Jose)

188 Martinvale Lane

邮编:95119

电话:#09-129

邮箱:sales@rfmw.asia

官网:www.rfmw.com


• 沈阳实拓科技有限公司(沈阳)

沈阳市和平区三好街35号8层

邮编:110004

电话:024-23843636

传真:024-23905232

邮箱:lf@shituokeji.cn

官网:www.shituokeji.cn


• 領先科儀有限公司(香港)

新界荃灣海盛路3號TML廣場21樓B5室

邮编:.

电话:852-31523600

传真:852-31523608

邮箱:allenma@advanceinst.com

官网:www.advanceinst.com


租赁合作伙伴


• 深圳君鉴科技股份有限公司(深圳市)

光明街道观光路华强创意产业园3栋B座12楼光明新区

邮编:518107

电话:400-860-3035

邮箱:shichang@chrent.com

官网:www.chrent.com


• 益莱储(北京)检测设备租赁有限公司(北京市)

来广营高科技产业园区4号楼3层301朝阳区

邮编:100102

电话:400-819-2800

邮箱:jim.chen@electrorent.com

官网:www.electrorent.com/cn


• 北京东方中科集成科技股份有限公司科技租赁事业部(北京市)

北京市海淀区阜成路67号银都大厦12层

邮编:100142

电话:400-650-5566

传真:010-68728001

邮箱:wangml@oimec.com.cn

官网:www.dfzk.com/rent


• 客而禧设备租赁(上海)有限公司(Shanghai)

徐汇区古美路1515号19号楼903室

邮编:201102

电话:021-54453166

邮箱:krc@krcchina.com

官网:www.krcchina.com


• 深圳市瑞普高电子有限公司(深圳市)

天安云谷产业园一期3栋D座1505-1506龙岗区

邮编:518129

电话:0755-29050100

邮箱:rickluo@ruipugao.com

官网:www.ruipugao.com


• 苏州锦凡精密仪器科技有限公司(苏州)

苏州市高新区滨河路625号创业大厦5幢505

邮编:215011

电话:18914031336

邮箱:18914031336@jfsz.net


解决方案合作伙伴


• Tokyo Weld Co., Ltd.(Ota-ku)

2-28-1 Kitamagome

邮编:143-0021

电话:81-3-3775-4331

传真:81-3-3775-4359

邮箱:d-imai@tokyoweld.com

官网:www.tokyoweld.com


• 上海恒榉电子科技有限公司(Shanghai)

上海市奉贤区南桥镇西闸公路1036号3栋2层

邮编:201401

电话:18112779808

邮箱:salesvalue@everise-hj.com

官网:everise-hj.com


• 佳燁科技股份有限公司(Ghiatek)(桃園市龜山區)

光明街243巷2號

邮编:33372

电话:+886-3-350-9960

传真:+886-3-320-3475

邮箱:support@ghiatek.com

官网:www.ghiatek.com.tw


• 华美博科技(北京)有限公司(北京市)

蓝靛厂东路2号金源时代商务中心C座9A2海淀区

邮编:100097

电话:010-88598732

邮箱:sino@sino-microtech.com

官网:www.sino-microtech.com


• 和创联合科技(北京)有限公司(北京市)

中关村东路18号财智国际大厦A座1612海淀区

邮编:100083

电话:400 650 7802

邮箱:info@hisuntest.com

官网:www.hisuntest.com


• 昆山捷得立电子有限公司(昆山市)

登云路288号海创大厦C座25楼

邮编:215316

电话:0512-36831748

邮箱:sales@jiedeli-china.com

官网:www.jiedeli-china.com


• 深圳市捷泰普科技有限公司(深圳市)

宝安区西乡街道前进二路桃源居南面深圳市智汇创新中心A座216室

邮编:518126

电话:0755-83908488

邮箱:sales@jtptech.cn

官网:www.jtptech.cn


• 深圳市易捷测试技术有限公司(深圳市)

福虹路9号世贸广场C座1203室福田区

邮编:518033

电话:0755-83698930

邮箱:dongni.zhang@gbit.net.cn

官网:gbit.net.cn


• 深圳市泰仕捷科技有限公司(深圳市)

松岗大道7号汉海达大厦616室宝安区

邮编:518105

电话:0755-27128586

邮箱:riky.gua@tesijet.com

官网:www.tesijet.com


• 深圳市蓉声科技有限公司(深圳市)

福中路海连大厦连天阁 1103 室福田区

邮编:518033

电话:13828880571

邮箱:jiang.qian@radiation-test.com

官网:www.radiation-test.com


• 苏州伊欧陆系统集成有限公司(苏州)

星湖街218号生物纳米园A7楼305室苏州工业园区

邮编:215000

电话:4008808776

邮箱:info@eoulu.com

官网:www.eoulu.com


• EM Labs Inc.(Kobe)

1-4-13 Mizukasadori, Nagata

邮编:653-0842

电话:+81-50-5370-0262

邮箱:info@emlabs.jp

官网:www.emlabs.jp


• MPI Corporation(Chupei)

No. 155 Chungho Street

邮编:302

电话:+886-3-555-1771

传真:+886-3-551-8381

邮箱:info@mpi-corporation.com

官网:www.mpi-corporation.com/ast


• NOFFZ(Tönisvorst)

Vorster Strasse 238

邮编:47918

电话:+49 2151-99878-0

邮箱:info@noffz.com

官网:www.noffz.com


• Power Technology Solutions(Santa Clara)

3048 Scott Blvd

邮编:95054

电话:650-308-8091 ext:

传真:408-727-0827

邮箱:inquiries@pwrts.com

官网:www.pwrts.com


• Resillion(Hasselt)

Kempische Steenweg 303

邮编:3500

电话:+32 498 92 01 71

邮箱:global-ci-sales@resillion.com

官网:www.resillion.com


• Suzhou Link Ways Tech Co., Ltd.(Suzhou)

16F, Block B, Jin Shi Wang Hu Building, No. 18, Jia Rui alley, SIP

邮编:215021

电话:+86 512 6602 8998


• 上海凌测电子科技有限公司(上海)

峨山路91弄120号陆家嘴软件园8号楼401A室浦东新区

邮编:200127

电话:021-61090608

邮箱:yue.lin@merlintest.com.cn

官网:www.merlintest.com.cn


• 上海北汇信息科技有限公司(上海市)

秀路100号虹桥总部1号4号楼3C闵行区紫

邮编:201103

电话:021-34716271

邮箱:info@polelink.com

官网:polelink.com


• 上海怿星电子科技有限公司(上海市)

钦州北路1199号智汇园87号楼5F室徐汇区

邮编:200233

电话:021-64955659

邮箱:biz@e-planet.cn

官网:www.e-planet.cn


• 东昇电磁兼容技术(深圳)有限公司(深圳市)

福田中心区26-3路中国凤凰大厦2栋25G

邮编:518026

电话:0755-82792411

邮箱:sales@jstoyo.cn

官网:www.jstoyo.cn


• 南京派格测控科技有限公司(南京市)

建邺区建邺人才服务大厦16楼

邮编:210019

电话:4008920858

邮箱:sales@pgtec.cn

官网:pgtec.cn


• 南京纳特通信电子有限公司(南京市)

江宁开发区临淮街20号

邮编:210012

电话:025-84471796

邮箱:sales@rflight.cn

官网:www.rflight.cn


• 深圳市研辰科技有限公司(深圳市)

益田路3008号皇都广场C座2815室福田区

邮编:518048

电话:0755-82828703

邮箱:roger_huang@ascentest.com

官网:www.ascentest.com


原厂翻新与二手仪器


• 是德科技原厂二手仪器商城(Keysight Certified Pre-Owned):www.keysight.com/used/cn/zh/


• 原厂翻新仪器经与新品相同的最终测试与校准,原厂保修最长 5 年;享 40%–90% 折扣,另有线上 5% / 教育 15% 优惠


 

0条提问

X

提问

X

回答

暂无视频

 

0条口碑
X

发表口碑

口碑标题
口碑
上传图片

ONETEST仪器资源库

联系电话:+86-755-23033660

电子邮箱:info@onetest.cn

Onetest仪器资源库

公众号

Onetest仪器资源库

视频号

Onetest仪器资源库

bilibili

Onetest仪器资源库

小助手

© 2026 Onetest仪器资源库 All Rights Reserved   粤ICP备17028186号-2      粤公网安备44030902003758

AI问答