总线连接器:PXI混合
通道数量:6
组数:1
可支持的硬件平台:PXI
48通道,1线、2线或4线,机电PXI多路复用器开关模块
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
总线连接器:PXI混合
通道数量:6
组数:1
可支持的硬件平台:PXI
48通道,1线、2线或4线,机电PXI多路复用器开关模块
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| 1wireREF | Signal connection reference |
| AB0+ | Positive analog bus connection |
| AB0- | Negative analog bus connection |
| CHx | Signal connection |
| COM0+ | Routing destination for all channels |
| COM0- | Routing destination for all 1wireREF connections |
| EXT_TRIG_IN | External trigger input connection |
| GND | Ground connection |
| RSVD | Reserved, do not connect |
| SCAN_ADV | Scan advanced output connection |
| — | No connection |
| AB0+ | Positive analog bus connection |
| AB0- | Negative analog bus connection |
| CHx+ | Positive signal connection |
| CHx- | Negative signal connection |
| CJS+ | CJC positive connection |
| CJS- | CJC negative connection |
| COM0+ | Routing destination for all positive channels |
| COM0- | Routing destination for all negative channels |
| EXT_TRIG_IN | External trigger input connection |
| GND | Ground connection |
| RSVD | Reserved, do not connect |
| SCAN_ADV | Scan advanced output connection |
| — | No connection |
| ABx+ | Positive analog bus connection |
| ABx- | Negative analog bus connection |
| CHx+ | Positive signal connection |
| CHx- | Negative signal connection |
| CJS+ | CJC positive connection |
| CJS- | CJC negative connection |
| COMx+ | Routing destination for corresponding positive signal connections |
| COMx- | Routing destination for corresponding negative signal connections |
| EXT_TRIG_IN | External trigger input connection |
| GND | Ground connection |
| RSVD | Reserved, do not connect |
| SCAN_ADV | Scan advanced output connection |
| — | No connection |
| ABx+ | Positive analog bus connection |
| ABx- | Negative analog bus connection |
| CHx+ | Positive signal connection |
| CHx- | Negative signal connection |
| CJS+ | CJC positive connection |
| CJS- | CJC negative connection |
| COMx+ | Routing destination for corresponding positive signal connections |
| COMx- | Routing destination for corresponding negative signal connections |
| EXT_TRIG_IN | External trigger input connection |
| GND | Ground connection |
| RSVD | Reserved, do not connect |
| SCAN_ADV | Scan advanced output connection |
| — | No connection |
| ABx+ | Positive analog bus connection |
| ABx- | Negative analog bus connection |
| CHxA+ | Positive excitation connection |
| CHxA- | Negative excitation connection |
| CHxB+ | Positive sense connection |
| CHxB- | Negative sense connection |
| COM0x+ | Routing destination for positive channels on the corresponding bank |
| COM0x- | Routing destination for negative channels on the corresponding bank |
| EXT_TRIG_IN | External trigger input connection |
| GND | Ground connection |
| RSVD | Reserved, do not connect |
| SCAN_ADV | Scan advanced output connection |
| — | No connection |
| ABx+ | Positive analog bus connection |
| ABx- | Negative analog bus connection |
| COLx+ | Positive column connection |
| COLx- | Negative column connection |
| EXT_TRIG_IN | External trigger input connection |
| GND | Ground connection |
| RSVD | Reserved, do not connect |
| ROWx+ | Positive row connection |
| ROWx- | Negative row connection |
| SCAN_ADV | Scan advanced output connection |
| — | No connection |
| Maximum switching voltage (channel-to-channel and channel-to-ground) | 30 VAC, 60 VDC |
| Maximum switching current (per channel) | 1 A |
| Maximum carry current (per channel) | 1 A |
| Maximum switching power (per channel) | 30 W |
| Minimum switch load | 10 μA, 10 mV |
| DC path resistance[1] Initial <1 Ω, warranted End-of-life >2 Ω | Initial |
| Initial | <1 Ω, warranted |
| End-of-life | >2 Ω |
| Thermal EMF (differential) | <2 μV |
| Bandwidth (50 Ω termination) | ≥10 MHz, typical |
| Channel-to-channel isolation (50 Ω termination) 10 kHz >100 dB, typical 100 kHz >80 dB, typical 1 MHz >55 dB, typical 10 MHz >30 dB, typical | 10 kHz |
| 10 kHz | >100 dB, typical |
| 100 kHz | >80 dB, typical |
| 1 MHz | >55 dB, typical |
| 10 MHz | >30 dB, typical |
| Maximum scan rate | 100 channels/s, typical |
| Relay operate time (at 20 °C)[2] | 3 ms, typical 5 ms, maximum |
| Release time (at 20 °C) | 1.5 ms, typical 5 ms, maximum |
| Expected relay life Mechanical 5 × 107 cycles Electrical (maximum load) 2 × 105 cycles | Mechanical |
| Mechanical | 5 × 107 cycles |
| Electrical (maximum load) | 2 × 105 cycles |
| Input trigger Sources PXI trigger lines <0...7>, front panel Minimum pulse width PXI trigger lines 70 ns Front panel 500 ns | Sources |
| Sources | PXI trigger lines <0...7>, front panel |
| Minimum pulse width PXI trigger lines 70 ns Front panel 500 ns | PXI trigger lines |
| PXI trigger lines | 70 ns |
| Front panel | 500 ns |
| Output trigger Destinations PXI trigger lines <0...7>, front panel Default pulse width 2 μs, typical | Destinations |
| Destinations | PXI trigger lines <0...7>, front panel |
| Default pulse width | 2 μs, typical |
| Relay type | Electromechanical, nonlatching |
| I/O connector | 68-pin male SCSI |
| Power requirement +5 VDC 370 mA, typical 700 mA, maximum | +5 VDC |
| +5 VDC | 370 mA, typical 700 mA, maximum |
| Relay contact material | Gold-clad silver alloy |
| Dimensions (L × W × H) | 3U, one slot, PXI/cPCI module 21.6 cm × 2.0 cm × 13.0 cm (8.5 in. × 0.8 in. × 5.1 in.) |
| Weight | 228 g (8 oz) |
| Operating temperature | 0 °C to 50 °C |
| Storage temperature | -20 °C to 70 °C |
| Relative humidity | 5% to 85% noncondensing |
| Pollution Degree | 2 |
| Maximum altitude | 2,000 m |
| Operational shock | 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Test profile developed in accordance with MIL-PRF-28800F.) |
| Random vibration Operating 5 Hz to 500 Hz, 0.3 grms Nonoperating 5 Hz to 500 Hz, 2.4 grms (Tested in accordance with IEC 60068-2-64. Nonoperating test profile exceeds the requirements of MIL-PRF-28800F,Class 3.) | Operating |
| Operating | 5 Hz to 500 Hz, 0.3 grms |
| Nonoperating | 5 Hz to 500 Hz, 2.4 grms (Tested in accordance with IEC 60068-2-64. Nonoperating test profile exceeds the requirements of MIL-PRF-28800F,Class 3.) |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxi-2503-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答