电阻器通道数量:9
总线连接:PXI Express
最大电阻:16 kΩ
电阻分辨率:0.25 欧姆
16位,9通道PXI可编程电阻模块
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
电阻器通道数量:9
总线连接:PXI Express
最大电阻:16 kΩ
电阻分辨率:0.25 欧姆
16位,9通道PXI可编程电阻模块
以下指标取自 Teledyne 官方在线规格书,按原文档小节分组。
| Bx+ | Positive bank connection |
| Bx- | Negative bank connection |
| CHx+ | Positive signal connection |
| CHx- | Negative signal connection |
| HI | HI input connection |
| HI SENSE | HI sense connection |
| LO | LO input connection |
| LO SENSE | LO sense connection |
| — | No connection |
| Number of channels | 9 |
| Maximum voltage Channel-to-channel 60 VDC, 30 VACrms, CAT I[1] Channel-to-ground 60 VDC, 30 VACrms, CAT I | Channel-to-channel |
| Channel-to-channel | 60 VDC, 30 VACrms, CAT I[1] |
| Channel-to-ground | 60 VDC, 30 VACrms, CAT I |
| Maximum current | 0.3 A (per channel) |
| Maximum power | 0.25 W (per channel) |
| Resistor accuracy | 0.5% |
| TCR | 100 ppm |
| Resolution | 0.25 Ω steps |
| Range | 0.25 Ω to 16,383 Ω (per channel) |
| Typical channel accuracy Channel set between 20 Ω and 40 Ω <10.0% Channel set between 40 Ω and 120 Ω <5.0% Channel set between 120 Ω and 400 Ω <2.0% Channel set between 400 Ω and 16,000 Ω <1.0% | Channel set between 20 Ω and 40 Ω |
| Channel set between 20 Ω and 40 Ω | <10.0% |
| Channel set between 40 Ω and 120 Ω | <5.0% |
| Channel set between 120 Ω and 400 Ω | <2.0% |
| Channel set between 400 Ω and 16,000 Ω | <1.0% |
| Typical minimum resistance | 2 Ω |
| Typical DC offset resistance (per channel) Initial <2 Ω End-of-life ≥3 Ω | Initial |
| Initial | <2 Ω |
| End-of-life | ≥3 Ω |
| Simultaneous drive limit | 161 relays |
| Relay operate/release time | 250 μs |
| Typical relay life Low power load (<50 mW) 1 × 108 cycles Full power load (<250 mW) 1 × 106 cycles | Low power load (<50 mW) |
| Low power load (<50 mW) | 1 × 108 cycles |
| Full power load (<250 mW) | 1 × 106 cycles |
| Input trigger Sources PXI trigger lines <0...7> Minimum pulse width 150 ns | Sources |
| Sources | PXI trigger lines <0...7> |
| Minimum pulse width | 150 ns |
| Output trigger Destinations PXI trigger lines <0...7> Default pulse width 2 μs, typical | Destinations |
| Destinations | PXI trigger lines <0...7> |
| Default pulse width | 2 μs, typical |
| Relay type | Reed |
| Front panel connector | 37-pin D-SUB connector |
| DMM port | 2 × 2 Micro-Fit connector |
| Power requirement | 1.2 W at 3.3 V 11 W maximum at 12 V |
| Dimensions (L × W × H) | 3U, one slot, PXIe/cPCI module, 21.6 × 2.0 × 13.0 cm (8.5 × 0.8 × 5.1 in.) |
| Weight | 323 g (11.3 oz) |
| Operating temperature | 0 °C to 55 °C |
| Storage temperature | -20 °C to 70 °C |
| Relative humidity | 5% to 85%, noncondensing |
| Pollution Degree | 2 |
| Maximum altitude | 2,000 m |
| Operational Shock | 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Test profile developed in accordance with MIL-PRF-28800F.) |
| Random vibration, operating | 5 Hz to 500 Hz, 0.3 grms |
| Random vibration, nonoperating | 5 Hz to 500 Hz, 2.4 grms (Tested in accordance with IEC 60068-2-64. Nonoperating test profile exceeds the requirements of MIL-PRF-28800F, Class 3.) |
官方规格书:https://www.ni.com/docs/en-US/bundle/pxie-2727-specs/page/specs.html
NI官方渠道
官方渠道(官网 / 热线 / 邮箱)
官方渠道(中国大陆)
• 官网 www.ni.com/zh-cn
• 在线选购 www.ni.com/zh-cn/shop.html
• 经销商查询
官网「查找经销商」 www.ni.com/zh-cn/shop/advisors.html
• 联系方式
NI 中文官网不公布中国区电话与邮箱,报价、技术支持、校准、维修一律通过官网在线表单提交(「联系我们」页)
全国办事处
公司总部
• NI(National Instruments)
• 地址
11500 N Mopac Expwy, Austin, TX 78759-3504, United States
• 母公司
Emerson(2023 年完成收购,NI 隶属艾默生测试与测量业务集团)
0条提问
X
提问
X
回答
发表口碑
AI问答