ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号
客服
厂商登录
类似产品
8 端口 800G OSFP 测试模块8 端口 800G QSFP-DD 测试模块4 端口 800G OSFP 测试模块4 端口 800G QSFP-DD 测试模块
同厂商产品
为部署和维护超宽带网络提供高效的铜缆鉴定（带宽最高35MHz）和DSL/G.fast分析。现在支持Speedtest®测试。
Theultimateinflexibilitywithajourney-to-400Gdesign.Gowith400Gnow,orstartwithup-to-100Gtesting,andupgradeto400Glater.
MAX-800系列是易用、便携的测试解决方案，用于安装、激活和排除10M至100G以太网连接与传输链路故障，可满足最严格的测试要求。
- «
- 1
- »
FTBx-88810 1G-800G 多业务测试模块|EXFO (在产)
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
EXFO · EXFO Inc.
FTBx-88810 1G-800G 多业务测试模块
连接器类型 SMA · 重量 FTBx-88810: 0.85 kg (1.87… · Compliance testing IEEE 802.3ba, IEEE 802.3b…
产品简介
覆盖从1G到800G的速率——支持以太网、OTN、光纤通道和相干光技术（800ZR）。专为未来的相干光模块设计。
核心参数
• 连接器类型：SMA
• 重量：FTBx-88810: 0.85 kg (1.87 lb) FTBx-88811: 0.88 kg (1.94 lb)
• Compliance testing：IEEE 802.3ba, IEEE 802.3bs, 802.3ck and 802.3df standards
• Power measurement per lane：Optical channel power measurement with color indicators
• Frequency measurements：Provides per lane frequency measurement of the received signal (in Hz)
• Frequency offset：Offsetting of the transmitted signal's clock on a selected interface,and monitoring
•Transceiver non-blocking analysis：Enables a step-by-step monitoring of the transceiver boot-up sequence
• Error injection mode：Manual,rate and continuous (maximum rate)
功能与特点
• 覆盖从1G到800G的速率
•支持全套相干光模块：800ZR、400ZR、100ZR和OpenZR（400ZR+、300ZR+、200ZR+、100ZR+）
• 支持从1G到800G的双端口，包括相干的双端口400ZR/ZR+光模块
• 支持多种协议：以太网、OTN、光纤通道
•紧凑、便携——是从实验室到现场环境的理想之选
• 内置光模块诊断功能：自动协商、链路训练、分路传输验证
资源下载
• 详细指标：全部技术指标已单独整理，详见 FTBx-88810 1G-800G 多业务测试模块 详细指标页
onetest仪器资源库 ·EXFO FTBx-88810 1G-800G 多业务测试模块
EXFO · EXFO Inc.
FTBx-88810 1G-800G 多业务测试模块 · 详细指标
连接器类型 SMA · 重量 FTBx-88810: 0.85 kg (1.87… · Compliance testing IEEE 802.3ba, IEEE 802.3b…
产品简介
覆盖从1G到800G的速率——支持以太网、OTN、光纤通道和相干光技术（800ZR）。专为未来的相干光模块设计。
本页按官方规格资料分组收录 FTBx-88810 1G-800G 多业务测试模块 的全部关键技术指标；产品定位、特性与应用场景请见 FTBx-88810 产品介绍页。
技术指标
技术规格
• Compliance testing：IEEE 802.3ba, IEEE 802.3bs, 802.3ck and 802.3df standards
• Multi-interface support：QSFP-DD MSA revision 4.0, OSFP MSA revision 2.0, 4×200G, 2×400G and 8×100G and 1×800G QSFP-DD MSA revision 6.3, 2×200G and 4×100G 800G, 400G AOC and DAC cables support Pluggable MSA-compliant 2×QSFP28 transceivers AOC OSFP28/OSFP-DD cable support Pluggable MSA-compliant 1×OSFP optical transceiver Pluggable MSA-compliant 2×QSFP+ transceivers Pluggable MSA-compliant 2×SFP28 optical transceivers Pluggable MSA-compliant 2×SFP/SFP+ optical transceivers Pluggable MSA-compliant 1×SFP-DD optical transceiver
• Line rate：850, 425/212.5/106.25 (single lambda)/103.125/53.125/41.25 Gbit/s, 100G SRBD, 40G, 25G, 1G, OIF DCO Coherent OSFP, QSFP-DD, QSFP28 and OpenZR+
• Physical-layer validation：PCS lane mapping and monitoring capability Per-lane skew generation and measurement PCS error generation and monitoring per lane Full MDIO/I2C read/write access
• Transceiver and cable validation：SFP, SFP+, SFP28, QSFP+, QSFP28, QSFP56, QSFP-DD, QSFP112 and OSFP. Also, AOC, DAC and breakout cables.
• Breakout cable support：Verification of 2×400G, 4×200G, 8×100GE, 4×100GE and 2×200GE breakout cables providing optical Tx/Rx power, L2/L3 traffic and BERT statistics per link.
• Power measurement per lane：Optical channel power measurement with color indicators
• Frequency measurements：Provides per lane frequency measurement of the received signal (in Hz)
• Frequency offset：Offsetting of the transmitted signal's clock on a selected interface, and monitoring
• Transceiver non-blocking analysis：Enables a step-by-step monitoring of the transceiver boot-up sequence
• BERT：BERT framed and unframed testing using different parameters and different frame sizes, including EMIX. The Ethernet BERT application also allows LLDP neighbor validation which displays the most important information forwarded by the LLDP protocol.
• Service disruption time（SDT）：SDT measurements based on no-traffic mode, with statistics including longest disruption time, shortest, last, average, count, total and pass/fail thresholds
• Latency measurements in BERT：High-resolution delay measurements integrated in the BER with statistics including current, average, maximum, minimum, count, total and pass/fail thresholds
• Error injection mode：Manual, rate and continuous (maximum rate)
• Layer 2/3/4 Ethernet testing：Unframed BERT at 800G MAC address and Ether type edition available, Q-in-Q capability with the ability 至 go up 至 three layers of stacked VLANs Source and destination IP address configuration available, IP TOS/DSP configuration available, UDP source and destination port configuration available BERT available at 1G, 10G, 25G, 40G, 100G, 200G and 400G Dual-port Ethernet testing capabilities for 1G, 10G, 25G, 40G, 100G, 200G and 400G Discover up 至 three levels of VLAN tagged traffic (C-/S-/E-VLAN) including their ID and priority, as well as the total VLAN tagged frame count and associated bandwidth Link layer discovery protocol (LLDP) neighbor information collected at all supported rates: from 1G 至 800G Ping and traceroute functions; user can configure up 至 1000 ping messages Advanced filtering capability for in-depth network troubleshooting
• Smart loopback：Return Ethernet traffic 至 the local unit by swapping packet overhead up 至 layer 4
• Traffic generation and monitoring：Traffic generation and shaping of up 至 16 streams of Ethernet and IP traffic, including the simultaneous monitoring of throughput, frame loss, packet jitter, latency and out-of-sequence frames, including MAC flooding for source and destination MAC addresses
• RFC：Throughput, back-to-back, frame loss and high-resolution latency measurements according 至 RFC 2544; frame size: RFC-defined or user-configurable
• EtherSAM：Simplified ITU-T Y.1564 test that performs service configuration and service performance tests using remote loopback or dual test set mode for bidirectional results
• RFC：RFC 6349 with enhanced algorithm: performs TCP testing with single or multiple TCP connections from 10BASE-T up 至 100G; discovers the MTU, RTT, actual and ideal TCP throughput; user can apply suggested window size boost factor 至 optimize test results or perform multiple client iPerf tests against the RFC 6349 (v2 and v3) iPerf Server mode of operation
• Rx frame-size analysis：1518
• Rx rate：Line utilization (%), Ethernet bandwidth (Mbit/s), frame rate (frame/s), and frame count
• Ethernet alarms：Link down, local fault detected, local fault received, remote fault, LOA
• Ethernet errors：FCS, jabber, runt, undersize and oversize
• Higher layer error analysis：UDP checksum
• PCS lane alarms and errors：LOS, LOC-lane, LOAML, excessive skew, Inv. Marker, Pre-FEC SYMB and Pre-FEC-bit
• PCS logical lane mapping：Manual and random
• Skew insertion：Per-lane skew generation and measurement range 0 至 10550
• Pre-emphasis：Pre-/main-/post-cursor options 至 improve electrical waveform including gray encoding
• FEC：Generation and analysis of FEC correctable and uncorrectable errors, local and remote degraded SER monitoring (error-free and uncorrectable) and percentage
• FEC statistics：Number of symbol errors per correctable codeword, number of pre-FEC symbol errors and bit statistics, codeword count
• IPv4 and IPv6 testing：Performs the following tests up 至 400G over IPV4 and IPv6, RFC 2544, BERT, traffic generation and monitoring, EtherSAM, ping and traceroute
• Autonegotiation support：Advertise local interface parameters and identify negotiated capabilities with the remote link partner
• Autonegotiation status：Monitors and displays the status of the auto-negotiation process, providing information on its various states
• Link training support：Provides the capability 至 enable or disable the link training process with support for copper cable assemblies as defined by the IEEE 802.3df (Clause 162.8.11) and 800G-ETC-R standards
• Link training status：Monitors and displays the status of the link training process, providing information on its various states
• Link training debugging：Report local and remote Tx coefficient update and exception counts and support the export of a detailed log of all link training status and control messages 至 aid in debugging
• Remote access：Supported via EXFO Remote ToolBox, Remote Desktop, VNC and EXFO Multilink for multiuser support
• Automation：Wide range of commands available per application 至 allow test automation
• Reporting：Test results are included in a report that can be generated in different formats: pdf, html and json
• OTN testing：OTU4 (112 Gbit/s), 4×OTU4, OTU3 (43 Gbit/s), OTU3e1 (44.57 Gbit/s), OTU3e2 (44.58 Gbit/s), OTU2 (10.71 Gbit/s), OTU2e (11.10 Gbit/s), OTU2f (11.32 Gbit/s), OTU1 (2.67 Gbit/s), OTU1e (11.05 Gbit/s) and OTU1f (11.27 Gbit/s) unframed and framed Ber tests. FEC testing: error insertion and monitoring OTL 3.4, OTL 4.4, OTL 4.2 and 4.1 support Alarms and errors generation and monitoring OTL lane mapping, skew generation and measurement OTU, ODU, OPU overhead manipulation and monitoring OTU, ODU (including ODU TCM), OPU layer alarm/error generation and analysis OTU, ODU (including ODU TCM) trace messages Round-trip delay (RTD) measurement OTN SDT measurement OTN through and OTN intrusive through mode testing Multiplexing/demultiplexing of ODU13, ODU23, ODU123, ODU03, ODU013, ODU0123, ODU04, ODU014, ODU134, ODU24, ODU234, ODU34, ODU14, ODU01234, ODU0124, ODU12, ODU024, ODU034, ODU1e4, ODUflex24, ODU2e4 and ODU124, ODU1234 with PRBS pattern and GigE and 10 GigE client mappings into OPU payloads. ODUflex at ODU2, ODU3 and ODU4. Flexibility 至 configure the required bandwidth based on n×1.25 Gbit/s tributary time slots with a PRBS pattern into the ODUflex payload; 40 GigE client mapping into ODU3 into ODU4. Performance monitoring: G.821, M.2100 Frequency analysis and offset generation including frequency sweep Power OTN OH analysis for BERT and synchronization testing of multiple fields in the OTN OH, including GCC0/1/2
• Ethernet mapping over OTN：Ethernet mapping over OTN respectively, with GMP support 40G transcoding capability with alarms, errors and statistics GMP alarms, errors and statistics GigE mapping into ODU0 using GFP-T, 10 GigE mapping into ODU2 using GFP-F, direct 10 GigE mappings into ODU1e/2e in different ODU multiplexing structures, and 40 GigE client mapped into ODU3/ODU4 Flexibility 至 map up 至 a 10G Ethernet client signal into ODUflex
• FC functional specifications - Testing：1X, 2X, 4X, 8X, 10X, 16X, 32X and 64X
• FC functional specifications - BERT：Framed FC
• FC functional specifications - Patterns（BERT）：PRBS 2E31-1, 2E23-1, 2E20-1, 2E15-1, 2E11-1, 2E9-1, one user-defined pattern and the capability 至 invert patterns
• FC functional specifications - Error injection：Bit error and FCS
• FC functional specifications - Error measurement：Bit error, 66B block, invalid marker, FCS, oversize error, undersize error, FEC-COR-CW, FEV-UNCOR-CW and Pre-FEC-SYMB
• FC functional specifications - Alarm detection：LOS, frequency, LOC, no traffic, pattern loss, link down, LOCWS, LOAML, link degrade, RD
• FC functional specifications - Buffer-to-buffer credit testing：Buffer-to-buffer credit estimation based on latency
• FC functional specifications - Latency：Round-trip latency
• FC functional specifications - SDT：Measures: last disruption, shortest disruption, longest disruption, average disruption, total disruption, and service disruption count
• Coherent optics - Compliance：OIF 800ZR, 400ZR, OpenZR+, 100GBASE-ZR
• Coherent optics - Tx power：Optical power Tx transceiver configuration
• Coherent optics - Interface rate：800ZR (2×400GE, 4×200GE, 8×100GE and 800GE), 400ZR DWDM amplified, 400ZR unamplified, 400ZR+, 300ZR+, 200ZR+ (2×100G and 1×200G clients), 100ZR+ and 100GBASE-ZR
• Coherent optics - 波长：Transceiver grid configuration
• Coherent optics - Optical metrics：Test set displays the following optical metrics CD (ps/nm), CFO (MHz), DGD (ps), OSNR (dB), PDL (dB), SOPCR (Krad/s), SOPMD (ps2)
• Coherent optics - Client configuration：Ethernet client L2/3 and L4 configuration
• Coherent optics - Ethernet frame：Client Ethernet frame configuration fixed or EMIX
• Coherent optics - Ethernet client BERT：Bit error analysis using PRBS31 supporting alarm/error monitoring and injection
• Coherent optics - FED：User can enable FEC excessive degrade alarm monitoring
• Coherent optics - FDD：User can enable FEC detected degrade alarm monitoring
• Coherent optics - FEC alarms：FED and FDD alarms monitoring
• Coherent optics - FEC error monitoring：FEC-UNCOR-FR and FEC-COR-BITS monitoring
• Coherent optics - Ethernet alarms：Link down, L Fault Det, L Fault Rcd, Remote fault LOA alarms
• Coherent optics - Ethernet errors：66B Block, FEC-UNCOR-FR, FEC-COR-BITS, FCS, Jabber, runt and undersize errors
• Coherent optics - Error and alarm injection：User can inject Interface, Ethernet, PCS and BERT errors and alarms
• Coherent optics - DCO Tx alarms：Tx LOA, Tx OOA, Tx CMU LOL, Tx RefClk LOL, Tx Deskew LOL, Tx FIFO
• Coherent optics - DCO Rx alarms：Rx LOF, Rx LOM, Rx Demod LOL, Rx CDC LOL, Rx LOA, Rx OOA, Rx Deskew LOL, Rx FIFO
• Coherent optics - Dual port testing：Dual-port Ethernet testing capabilities for 400ZR and OpenZR+
通用规格
• Module：FTBx-88810; FTBx-88811
• 尺寸（高×宽×深）：FTBx-88810: 51 mm × 159 mm × 182 mm (2 in × 6 1/4 in × 7 3/16 in) FTBx-88811: 51 mm × 159 mm × 182 mm (2 in × 6 1/4 in × 7 3/16 in)
• 重量：FTBx-88810: 0.85 kg (1.87 lb) FTBx-88811: 0.88 kg (1.94 lb)
• 温度：Operating: 0 ℃ 至 40 ℃ (32 ℉ 至 104 ℉) Storage: –40 ℃ 至 70 ℃ (–40 ℉ 至 158 ℉)
REF-OUT INTERFACE
• Tx pulse amplitude：200 mVpp 至 1300 mVpp, depending on frequency
• Transmission frequency：155 MHz 至 3.50 GHz
• Output configuration：AC-coupled
• Load impedance：50 Ω
• 连接器类型：SMA
• External cable：Maximum 1 meter cable length (RG178 cable with 3.1 dB/m attenuation at 3.5 GHz)
• 激光安全：LASER 1; IEC 60825-1:2014-05
注：以上指标摘自 EXFO 官网公开产品规格资料，未特别说明均为典型值；指标可能随硬件与软件版本变化，恕不另行通知。官方规格书中以字母标注的脚注（测试条件）未在本页展开，完整条件请以原规格书为准。
onetest仪器资源库 · EXFO FTBx-88810 1G-800G 多业务测试模块 详细指标
全部
EXFO官方渠道
厂家联系方式（中国）
爱科斯福通信技术（北京）有限公司
地址：北京市朝阳区北四环中路27号院5号楼钰珵大厦30层06-09室（邮编 100101）
电话：+86-10-8950 8858
免费电话：+86-400-610-6999
传真：+86-10-89508855
深圳分公司与工厂
爱科斯福通信技术（北京）有限公司深圳分公司
地址：深圳市南山区粤海街道高新区社区高新南七道138号惠恒大楼一期4楼4226（邮编 518063）
电话：+86-755-8203-2300 传真：+86-755-8203-2306
EXFO Telecom Equipment (Shenzhen) Ltd.
地址：广东省深圳市宝安区福海街道新田社区新田大道71-3号 F1–F3（邮编 518103）
电话：+86-755-29553100
授权经销商（官网「中国」区所列）
Great Engineering Technology Corporation CO. LTD.（GETECH） 电话：0800-802-206 邮箱：service@getech.com.tw 网址：www.getech.com.tw
NTS Technologies Limited 电话：+852-3184-0330 邮箱：office@nts-tech.com 网址：www.nts-tech.com
WeiTECH Communication Co., Ltd. 电话：+886-2-2223-8800
总部与全球分支机构
EXFO 公司总部：400 Godin Avenue, Quebec, Quebec G1M 2K2, Canada 电话：+1 418-683-0211 免费电话：+1 800-663-3936 传真：+1 418-683-2170
EXFO 协议业务部门（蒙特利尔）：2500 Boul. Alfred-Nobel, Saint-Laurent, Quebec H4S 0A9, Canada 电话：+1 514-856-2222 免费电话：+1 888-972-7666
EXFO 芬兰：Elektroniikkatie 2, FI-90590 Oulu, Finland 电话：+358 (0) 403 010 300
EXFO America Inc.：612 Spring Hill Drive, Suite 180, Spring, TX 77386-6045, USA 电话：+1 972-761-9271
EXFO Europe Ltd.：Winchester House, School Lane, Chandlers Ford, SO53 4DG, UK 电话：+44-2380-246-800
EXFO Asia Pacific PTE Ltd.：229 Mountbatten Road #02-26 Mountbatten Square, Singapore 398007 电话：+65-6333-8241 传真：+65-6333-8242
技术支持（中国）：电话 +86-10-8950 8858 免费电话 +86-400-610-6999
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758