EXFO · EXFO Inc.
MXS-9100 MEMS矩阵光开关 · 详细指标
工作波长范围 1240 - 1680 nm · 光纤类型 9/125 um singlemode · 插损 0.8 dB typical 1.4 dB max.
产品简介
这一种全光学交叉连接技术由EXFO与DiCon联合开发,针对EXFO的系统和软件进行了优化,可在光纤层提供快速保护切换,将测试序列自动化,并提供仪表级性能。
本页按官方规格资料分组收录 MXS-9100 MEMS矩阵光开关 的全部关键技术指标;产品定位、特性与应用场景请见 MXS-9100 产品介绍页。
技术指标
技术规格
MxN matrix, MXS-9100 optical switch — Optical specifications
• 插损:0.8 dB typical 1.4 dB max.
• 串扰:-70 dB typical -55 dB max.
• 回波反射:-55 dB typical -45 dB max.
• 切换时间:15 ms typical 20 ms max.
• 波长相关损耗(WDL):0.3 dB max. for 2x8 至 16x16 0.4 dB max. for 24x24 至 96x96
• 偏振相关损耗(PDL):0.08 dB typical 0.25 dB max.
• 可重复性:0.01 dB typical 0.06 dB max.
• 光功率:500 mW max.
• 工作温度:0 至 50 oC
• 存储温度:-20 至 60 oC
• 相对湿度:0% 至 80% non-condensing
• 光纤类型:9/125 um singlemode
• 工作波长范围:1240 - 1680 nm
Singlemode 1xN, MXS-9100 optical switch — Optical specifications
• 插损:0.7 dB max
• 串扰:-50 dB max.
• 回波反射:-50 dB max.
• 切换时间:30 ms max.
• 波长相关损耗(WDL):0.5 dB max.
• 偏振相关损耗(PDL):0.15 dB max.
• 可重复性:0.02 dB max.
• 光功率:500 mW max.
• 工作温度:0 至 50 oC
• 存储温度:-20 至 60 oC
• 相对湿度:0% 至 80% non-condensing
• 光纤类型:9/125 um singlemode
• 工作波长范围:1240 - 1680 nm
Multimode 1xN, MXS-9100 optical switch — Optical specifications
• 插损:1x4: 1.3 dB max. 1x8, 50 um: 1.5 dB max. 1x8, 62.5 um: 1.8 dB max. 1x12: 2.0 dB max.
• 串扰:50 um: -25 dB max. 62.5 um: -20 dB max.
• 回波反射:-20 dB max.
• 切换时间:30 ms max.
• 可重复性:0.02 dB max.
• 光功率:500 mW max.
• 工作温度:0 至 50 oC
• 存储温度:-20 至 60 oC
• 相对湿度:0% 至 80% non-condensing
• 光纤类型:50/125 um multimode, or 62.5/125 um multimode
• 工作波长范围:840 - 1330 nm
MxN matrix: 1. Specifications referenced without connectors at 23 ± 5 oC. Add 0.2 dB for connector loss. 2. Specifications valid when wavelength is set to the wavelength range in use (C, L, O or U band). 3. Insertion Loss (IL) specification is defined at 1550 nm (C band). Operation at 1310 nm (O band) adds 0.1 dB typical, 0.2 dB max. Operation at 1590 nm (L band) adds 0.1 dB typical, 0.2 dB max. Operation at 1625 nm (U band) adds 0.2 dB typical, 0.4 dB max. 4. WDL is measured in a +/- 20 nm range centered at the set wavelength (1310, 1550, 1590 or 1625 nm). Operation in U band adds 0.1 dB to the max. 5. Repeatability is defined within 100 cycles. Singlemode 1xN: 1. Specifications referenced without connectors at 23 ± 5 oC. Add 0.4 dB for connector loss. 2. Insertion Loss (IL) specification is defined at 1550 nm & 1625 nm. Operation at 1310 nm adds 0.2 dB max. 3. WDL is defined within a wavelength band, and is measured over 1290 - 1330 nm, 1530 - 1570 nm, and 1605 - 1641 nm. 4. Repeatability is defined within 100 cycles. Multimode 1xN: 1. Specifications referenced without connectors at 23 ± 5 oC. Add 0.4 dB for connector loss. 2. Insertion Loss (IL) specification is defined at 850nm & 1310nm and is based upon using a LED source for a full modefill condition. Underfilled sources, such as VCSELs, will have a lower insertion loss. 3. Optical off state isolation is the same as the crosstalk specification. 4. Repeatability is defined within 100 cycles.
通用规格
Key features
• 技术:Proven DiCon MEMS technology
• Protocol / bit rate:Protocol and bit rate independent
• Design:High density design, 至 minimize rack space
• Reliability:High reliability with lifetime > 10 9 cycles
• 远程控制:SCPI over ethernet remote control
Available configurations
• 配置:MxN Matrix; switch size min 2x8, max 96x96; fiber type: Singlemode
• 配置:1xN Array; switch size min 1x4, max 1x8; fiber type: Singlemode
• 配置:1xN Array; switch size min 1x4, max 1x12; fiber type: Multimode
MxN matrix, MXS-9100 — Electrical specifications
• 自锁类型:Non-latching
• 控制类型:Ethernet Interface with EXFO SCPI Command Set
• 供电电压:AC 100 - 240 V, 50/60 Hz
MxN matrix, MXS-9100 — Mechanical specifications (housing size)
• 2x8 to 16x16:Height: 43.65 mm (1U) Width: 483 mm (19”) Depth: 342 mm
• 24x24 to 32x32:Height: 88.0 mm (2U) Width: 483 mm (19”) Depth: 434.5 mm
• 48x48 to 96x96:Height: 177 mm (4U) Width: 483 mm (19”) Depth: 434.5 mm
MxN matrix, MXS-9100 — Electrical specifications (switch size)
• 2-8:2 inputs and 8 outputs
• 2-16:2 inputs and 16 outputs
• 4-4:4 inputs and 4 outputs
• 4-8:4 inputs and 8 outputs
• 4-12:4 inputs and 12 outputs
• 4-16:4 inputs and 16 outputs
• 8-8:8 inputs and 8 outputs
• 8-16:8 inputs and 16 outputs
• 16-16:16 inputs and 16 outputs
• 24-24:24 inputs and 24 outputs
• 32-32:32 inputs and 32 outputs
• 48-48:48 inputs and 48 outputs
• 64-64:64 inputs and 64 outputs
• 96-96:96 inputs and 96 outputs
Singlemode 1xN, MXS-9100 — Electrical specifications
• 自锁类型:Non-latching
• 控制类型:Ethernet Interface with EXFO SCPI Command Set
• 供电电压:AC 100 - 240 V, 50/60 Hz
Singlemode 1xN, MXS-9100 — Mechanical specifications (chassis size)
• 1U:Height: 43.65 mm Width: 483 mm (19”) Depth: 342 mm
• 2U:Height: 88.0 mm Width: 483 mm (19”) Depth: 434.5 mm
• 4U:Height: 177 mm (4U) Width: 483 mm (19”) Depth: 434.5 mm
Multimode 1xN, MXS-9100 — Electrical specifications
• 自锁类型:Non-latching
• 控制类型:Ethernet Interface with EXFO SCPI Command Set
• 供电电压:AC 100 - 240 V, 50/60 Hz
Multimode 1xN, MXS-9100 — Mechanical specifications (chassis size)
• 1U:Height: 43.65 mm Width: 483 mm (19”) Depth: 342 mm
• 2U:Height: 88.0 mm Width: 483 mm (19”) Depth: 434.5 mm
• 4U:Height: 177 mm (4U) Width: 483 mm (19”) Depth: 434.5 mm
注:以上指标摘自 EXFO 官网公开产品规格资料,未特别说明均为典型值;指标可能随硬件与软件版本变化,恕不另行通知。官方规格书中以字母标注的脚注(测试条件)未在本页展开,完整条件请以原规格书为准。
onetest仪器资源库 · EXFO MXS-9100 MEMS矩阵光开关 详细指标