ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号
客服
厂商登录
类似产品
6433P光波元件分析仪是面向高速电光器件、光电器件及光光器件调制特性测试的仪器，频率范围覆盖10MHz~110GHz，集成电电测试、电光测试、光电测试及光光测试4种测试模式，具有对数/线性幅度、相位、群时延、Smith圆图、极坐标等多种显示格式，能够精确测量光电网络的幅/相频特性，主要应用于高速电…
精确测量3dB截频、差分、交调/互调、噪声系数等参数测试波长 覆盖C波段（1530-1565nm），1310±5nm，可定制波长点绝对频率响应精度 ±1.1dB@8GHz相对频率响应精度 ±0.7dB@8GHz幅频响应重复性 ±0.13dB@8GHz
精确测量3dB截频、差分、交调/互调、噪声系数等参数测试波长 覆盖C波段（1530-1565nm），1310±5nm，可定制波长点绝对频率响应精度 ±1.1dB@8GHz相对频率响应精度 ±0.7dB@8GHz幅频响应重复性 ±0.13dB@8GHz
N4372E 110GHz 分析仪|是德科技 (在产)
参考价格 ：
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
是德科技|KEYSIGHT
XP1 系列光波元件分析仪，110 GHz
光器件的精密表征
产品简介
是德科技 N4372E 光波元件分析仪可对光发射机和光接收机进行高达 110 GHz 的高频参数测试
核心参数
• 类型：光波元件分析仪
• 光纤模式：单模
• 最高频率：110 GHz
功能特性
• 业界首款 110 GHz 光接收与发射交钥匙测试系统
基于 N5290A 和 N5291A 900 Hz 至 110/120 GHz PNA 毫米波系统，
全新的 N4372E 光波元件分析仪为光接收机测试和光发射机测试提供了前所未有的带宽。
是德科技 N4372E 光波元件分析仪为光接收机和光发射机测试提供带宽。
发射和接收（TX / RX）制造商正朝着归零和非归零（RZ / NRZ）以及脉冲幅度调制（PAM）格式的更高波特率迈进——不断突破高带宽 S 参数测试的极限。
N4372E 光波元件分析仪凭借其在扩展波长范围内 110 GHz 的测量能力，助力您的光电测试。
它还在完整的 1260 nm 至 1620 nm 范围内提供高达 110 GHz 的 RX 测试。
其内置光功率计使您能够检查和控制工作功率。
N4372E 光波元件分析仪的光发射机输入端口可连接辅助可调谐激光器，以验证随波长变化的 S 参数。
资源下载
以上内容与指标均取自是德科技（KEYSIGHT）官网该产品详情页与官方产品资料，未标注口径的为厂家公布值。
是德科技|KEYSIGHT · onetest 仪器资源库
是德科技 | KEYSIGHT
N4372E 110GHz 分析仪 详细指标
Precision characterization of optical components
一、通用规格
Give additional information for using the instrument. These are general descriptive terms that do not imply
Device under test (DUT) response
条件：describes the ratio of the RF amplitude at the device output to the modulated optical signal input power.
For electro-optical devices (e.g. modulators) this describes the ratio of the optical modulated output signal
power to the RF amplitude at the device input. For opto-electrical devices (e.g. photodiodes) this
相对频率响应不确定度
Describes the maximum deviation of the shape of a measured trace from the (unknown) real trace. This
specification has strong influence on the accuracy of the
3-dB cut-off frequency determined for the device
绝对频率响应不确定度
Describes the maximum difference between any amplitude point of the measured trace and the
(unknown) real value. This specification is useful to determine the absolute responsivity of the device
频率响应重复性
Describes the deviation of repeated measurement without changing any parameter or connection relative
最小值 measurable 频率响应
Describes the average measured responsivity when no modulation signal is present at the device under
test. This represents the noise floor of the measurement system.
测量能力
Responsivity (S21, amplitude and phase) Reflectivity (S11, S22, amplitude and phase)
• Absolute frequency response, the conversion efficiency of a transmitter, or the responsivity and gain of a receiver
• Relative frequency response, the filter shape of the electro-optical conversion or of the gain of an amplifier
• 3-dB bandwidth of the electro-optical or electrical
• Impedance match
Balanced measurements (requires min.
3 extender heads)
二、Optical 接收机测试规格
(N4372E-310, N4372E-311)
测量条件
• Network analyzer set to 0 dBm electrical output power
• PNA path configuration for port to which LCA Optical Transmitter is connected to set to “Low Bnd Hi
• Number of averages
1
• After full two-port electrical calibration using a mechanical calibration kit, Keysight
85059B, at
constant temperature (
± 1 K) with network analyzer set to −15 dBm electrical output power
• Modulation-bias optimization set to “continuous”
• Measurement frequency grid equals electrical calibration grid
• DUT signal delay ≤
0.1/IF-BW
• Specified temperature range: +20 °C to +26 °C, with <
1 K deviation from temperature at PNA
机械校准
条件：• Using high quality electrical and optical connectors in very good condition
• After warm-up time of 90 minutes after LCA software has been started
• All specifications are typical when using external laser sources
The optical test set always has angled connectors. Depending on the selected Option (-021 straight
-022
angled) the appropriate jumper cable will be delivered. This jumper cable must always be used to connect
the device under test to the optical test set to protect the test set’s connectors and is required for
性能测试
条件：1. External laser source required. Excluding water absorption wavelengths.
System specifications Receiver testing (N4372E-310, N4372E-311)
Calibrated frequency range 10 MHz to 100 GHz (Options
010, E10)
10 MHz to 110 GHz (Options
011, E11)
Internal laser wavelength 1310 nm ± 20 nm (Options 100
102)
1550 nm ± 20 nm (Options 101
102)
Operating wavelength range 1260 nm to 1620 nm
1
Specifications for testing optical receivers at 1310 nm
IF 带宽设置
条件：Group delay uncertainty - Derived from phase uncertainty, see section “Group delay uncertainty”.
1. For maximum available average output power from LCA Optical Transmitter.
2. Average value over frequency range
3. Except phase wrap aliasing (Example: A DUT group delay of 5 ns (1 m cable length) requires a frequency step size of
< ± 0.06 m). A c onstant group delay offset leads to a phase offset ΔΦ = 360 × ΔGD × fmod (in deg).
4. 6 dB higher noise floor for Options N4372E- E10, N4372E- E11.
• 300 Hz IFBW (“Reduce IF bandwidth at low frequency” enabled) with measurement points on a
10 MHz raster (if not stated otherwise) for relative frequency response uncertainty
• 10 Hz IFBW (“Reduce IF bandwidth at low frequency” enabled) with measurement points on a
100 MHz raster (if not stated otherwise) for minimum measurable frequency response
System specifications DUT response
10 MHz to 200 MHz
> 200 MHz to
1 GHz
> 1 GHz to
26.5 GHz
> 26.5 GHz to
64 GHz
≤ 100 GHz
(Options
010, E10)
≤ 110 GHz
(Options
011, E11)
Relative frequency response uncertainty 1 ≥
–27 dB (A/W)
- ≤ ± 0.9 dBe ≤ ± 0.9 dBe ≤ ± 1.2 dBe ≤ ± 2.8 dBe (010, E10
011)
(typical) ≤ ± 1.2 dBe ≤ ± 0.7 dBe ≤ ± 0.7 dBe ≤ ± 1.0 dBe ≤ ± 2.0 dBe (010, E10
011)
≤
± 2.8 dBe (E11)
Absolute frequency response uncertainty (typical)
1
≥ –27 dB (A/W) ≤ ± 2.8 dBe ≤ ± 2.1 dBe ≤ ± 2.1 dBe ≤ ± 2.4 dBe ≤
± 4.2 dBe
Frequency response repeatability (typical) 1 ≥ –27 dB (A/W) ≤ ± 0.7 dBe ≤ ± 0.1 dBe ≤ ± 0.1 dBe ≤ ± 0.3 dBe ≤
± 1.4 dBe
Minimum measurable freq. response (noise floor) 2, 4 - - –79 dB (A/W) –90 dB (A/W) –79 dB (A/W) –67 dB (A/W) (typical) –62 dB (A/W) –84 dB (A/W) –93 dB (A/W) –82 dB (A/W)
–71 dB (A/W)
Phase uncertainty (typical) 1, 2, 3 ≥ –27 dB (A/W) ≤ ± 3.4° ≤ ± 1.8° ≤ ± 4.0° ≤ ± 4.0° ≤
± 12.5°
Example: ± 2.0° →
± 8 ps (1 GHz aperture)
≤ 0.2 GHz to avoid phase wraps). Excluding a constant group delay offset of <
± 0.3 ns typical. (Cable length uncertainty
Specifications for testing optical receivers at 1550 nm
IF 带宽设置
条件：Group delay uncertainty - Derived from phase uncertainty, see section “Group delay uncertainty”.
1. For maximum available average output power from LCA Optical Transmitter.
2. Average value over frequency range
3. Except phase wrap aliasing (Example: A DUT group delay of 5 ns (1 m cable length) requires a frequency step size of
< ± 0.06 m). A constant group delay offset leads to a phase offset ΔΦ = 360 × ΔGD × fmod (in deg).
• 300 Hz IFBW (“Reduce IF bandwidth at low frequency” enabled) with measurement points on a
10 MHz raster (if not stated otherwise) for relative frequency response uncertainty
• 10 Hz IFBW (“Reduce IF bandwidth at low frequency” enabled) with measurement points on a
100 MHz raster (if not stated otherwise) for minimum measurable frequency response
System specifications DUT response
10 MHz to 200 MHz
> 200 MHz to
1 GHz
> 1 GHz to
26.5 GHz
> 26.5 GHz to
64 GHz
≤ 100 GHz
(Options
010, E10)
≤ 110 GHz
(Options
011, E11)
Relative frequency response uncertainty 1 ≥
–27 dB (A/W)
- ≤ ± 0.8 dBe ≤ ± 0.9 dBe ≤ ± 1.3 dBe ≤ ± 2.5 dBe (010, E10
011)
(typical) ≤ ± 0.8 dBe ≤ ± 0.7 dBe ≤ ± 0.7 dBe ≤ ± 1.0 dBe ≤ ± 1.8 dBe (010, E10
011)
≤
± 2.5 dBe (E11)
Absolute frequency response uncertainty (typical)
1
≥ –27 dB (A/W) ≤ ± 2.3 dBe ≤ ± 2.4 dBe ≤ ± 2.4 dBe ≤ ± 2.5 dBe ≤
± 3.7 dBe
Frequency response repeatability (typical) 1 ≥ –27 dB (A/W) ≤ ± 0.5 dBe ≤ ± 0.2 dBe ≤ ± 0.2 dBe ≤ ± 0.2 dBe ≤
± 1.1 dBe
Minimum measurable freq. response (noise floor) -
2
- –80 dB (A/W) –93 dB (A/W) –82 dB (A/W)
–70 dB (A/W)
(typical) –63 dB (A/W) –85 dB (A/W) –95 dB (A/W) –85 dB (A/W)
–74 dB (A/W)
Phase uncertainty (typical) 1, 2, 3 ≥ –27 dB (A/W) ≤ ± 8.0° ≤ ± 1.2° ≤ ± 4.0° ≤ ± 4.0° ≤
± 12.0°
Example: ± 2.0° →
± 8 ps (1 GHz aperture)
≤ 0.2 GHz to avoid phase wraps). Excluding a constant group delay offset of <
± 0.3 ns typical. (Cable length uncertainty
三、Optical Transmitter Test Specifications
(N4372E-301, N4372E-311)
测量条件
• Network analyzer set to 0 dBm electrical output power
• PNA path configuration for port to which LCA Optical Transmitter is connected to set to “Low Bnd Hi
• Number of averages
1
• After full two-port electrical calibration using a mechanical calibration kit, Keysight
85059B, at
constant temperature (
± 1 K) with network analyzer set to −15 dBm electrical output power
• Modulation-bias optimization set to “continuous”
• Measurement frequency grid equals electrical calibration grid
• DUT signal delay ≤
0.1/IF-BW
• Specified temperature range: +20 °C to +26 °C, with <
1 K deviation from temperature at PNA
机械校准
条件：• Using high quality electrical and optical connectors in very good condition
• After warm-up time of 90 minutes after LCA software has been started
The optical test set always has angled connectors. Depending on the selected Option (-021 straight
-022
angled) the appropriate jumper cable will be delivered. This jumper cable must always be used to connect
the device under test to the optical test set to protect the test set’s connectors and is required for
性能测试
条件：1. Excluding water absorption wavelengths
System specifications Transmitter testing (N4372E-301, N4372E-311)
Calibrated frequency range 10 MHz to 100 GHz (Options
010, E10)
10 MHz to 110 GHz (Options
011, E11)
Operating wavelength range 1260 nm to 1620 nm
1
Maximum optical input power
+14 dBm
Specifications for testing optical transmitters at 1310 nm
IF 带宽设置
条件：Group delay uncertainty - Derived from phase uncertainty, see section “Group delay uncertainty”.
1. Average value over frequency range
2. Except phase wrap aliasing (Example: A DUT group delay of 5 ns (1 m cable length) requires a frequency step size of
< ± 0.06 m). A c onstant group delay offset leads to a phase offset ΔΦ = 360 × ΔGD × fmod (in deg).
• 300 Hz IFBW (“Reduce IF bandwidth at low frequency” enabled) with measurement points on a
10 MHz raster (if not stated otherwise) for relative frequency response uncertainty
• 10 Hz IFBW (“Reduce IF bandwidth at low frequency” enabled) with measurement points on a
100 MHz raster (if not stated otherwise) for minimum measurable frequency response
System specifications DUT response
10 MHz to 200 MHz
> 200 MHz to
1 GHz
> 1 GHz to
26.5 GHz
> 26.5 GHz to
64 GHz
≤ 100 GHz
(Options
010, E10)
≤ 110 GHz
(Options
011, E11)
Relative frequency response uncertainty ≥
–31 dB (W/A)
- ≤ ± 0.8 dBe ≤ ± 0.9 dBe ≤ ± 1.3 dBe ≤
± 2.5 dBe
(010, E10, 011
301)
(typical) ≤ ± 1.0 dBe ≤ ± 0.7 dBe ≤ ± 0.7 dBe ≤
± 1.0 dBe
≤
± 1.6 dBe
(010, E10, 011
301)
≤
± 2.5 dBe (E11)
Absolute frequency response uncertainty (typical)
1
≥ –31 dB (W/A) ≤ ± 3.5 dBe ≤ ± 2.9 dBe ≤ ± 2.9 dBe ≤ ± 3.1 dBe ≤
± 4.6 dBe
Frequency response repeatability (typical) ≥ –31 dB (W/A) ≤ ± 0.1 dBe ≤ ± 0.1 dBe ≤ ± 0.1 dBe ≤ ± 0.1 dBe ≤
± 0.4 dBe
Minimum measurable freq. response (noise floor) -
1
- –86 dB (W/A) –102 dB (W/A) –93 dB (W/A)
–88 dB (W/A)
(typical) –75 dB (W/A) –91 dB (W/A) –104 dB (W/A) –96 dB (W/A)
–92 dB (W/A)
Phase uncertainty (typical) 2 ≥ –31 dB (W/A) ≤ ± 4.2° ≤ ± 1.5° ≤ ± 1.5° ≤ ± 2.8° ≤
± 9.5°
Example: ± 2.0° →
± 8 ps (1 GHz aperture)
≤ 0.2 GHz to avoid phase wraps). Excluding a constant group delay offset of <
± 0.3 ns typical. (Cable length uncertainty
Specifications for testing optical transmitters at 1550 nm
IF 带宽设置
条件：Group delay uncertainty - Derived from phase uncertainty, see section “Group delay uncertainty”.
1. For +4 dBm average output power from LCA Optical Transmitter output .
2. Except phase wrap aliasing (Example: A DUT group delay of 5 ns (1 m cable length) requires a frequency step size of
< ± 0.06 m). A c onstant group delay offset leads to a phase offset ΔΦ = 360 × ΔGD × fmod (in deg).
• 300 Hz IFBW (“Reduce IF bandwidth at low frequency” enabled) with measurement points on a
10 MHz raster (if not stated otherwise) for relative frequency response uncertainty
• 10 Hz IFBW (“Reduce IF bandwidth at low frequency” enabled) with measurement points on a
100 MHz raster (if not stated otherwise) for minimum measurable frequency response
System specifications DUT response
10 MHz to 200 MHz
> 200 MHz to
1 GHz
> 1 GHz to
26.5 GHz
> 26.5 GHz to
64 GHz
≤ 100 GHz
(Option
010, E10)
≤ 110 GHz
(Option
011, E11)
Relative frequency response uncertainty ≥
–28 dB (W/A)
- ≤ ± 0.7 dBe ≤ ± 0.9 dBe ≤ ± 1.2 dBe ≤
± 2.8 dBe
(010, E10, 011
301)
(typical) ≤ ± 0.7 dBe ≤ ± 0.7 dBe ≤ ± 0.7 dBe ≤
± 1.0 dBe
≤
± 1.8 dBe
(010, E10, 011
301)
≤
± 2.8 dBe (E11)
Absolute frequency response uncertainty (typical)
1
≥ –28 dB (W/A) ≤ ± 2.1 dBe ≤ ± 2.0 dBe ≤ ± 2.0 dBe ≤ ± 2.1 dBe ≤
± 2.6 dBe
Frequency response repeatability (typical) ≥ –28 dB (W/A) ≤ ± 0.2 dBe ≤ ± 0.1 dBe ≤ ± 0.1 dBe ≤ ± 0.1 dBe ≤
± 0.2 dBe
Minimum measurable freq. response (noise floor) -
1
- –85 dB (W/A) –102 dB (W/A) –94 dB (W/A)
–88 dB (W/A)
(typical) –72 dB (W/A) –92 dB (W/A) –104 dB (W/A) –97 dB (W/A)
–91 dB (W/A)
Phase uncertainty (typical) 2 ≥ –28 dB (W/A) ≤ ± 4.6° ≤ ± 1.4° ≤ ± 1.6° ≤ ± 2.5° ≤
± 5.5°
Example: ± 2.0° →
± 8 ps (1 GHz aperture)
≤ 0.2 GHz to avoid phase wraps). Excluding a constant group delay offset of <
± 0.3 ns typical. (Cable length uncertainty
四、Optical-仅 Device 测试规格
(N4372E-311)
测量条件
• Network analyzer set to 0 dBm electrical output power
• PNA path configuration for port to which LCA Optical Transmitter is connected to set to “Low Bnd Hi
• Number of averages
1
• After full two-port electrical calibration using a mechanical calibration kit, Keysight
85059B, at
constant temperature (
± 1 K) with network analyzer set to −15 dBm electrical output power
• Modulation-bias optimization set to “continuous”
• Measurement frequency grid equals electrical calibration grid
• DUT signal delay ≤
0.1/IF-BW
• Specified temperature range: +20 °C to +26 °C, with <
1 K deviation from temperature at PNA
机械校准
条件：• Using high quality electrical and optical connectors in very good condition
• After warm-up time of 90 minutes after LCA software has been started
• All specifications are typical when using external laser sources
The optical test set always has angled connectors. Depending on the selected Option (-021 straight
-022
angled) the appropriate jumper cable will be delivered. This jumper cable must always be used to connect
the device under test to the optical test set to protect the test set’s connectors and is required for
性能测试
条件：1. Excluding water absorption wavelengths
System specifications Optical-only device testing (N4372E-311)
Calibrated frequency range 10 MHz to 100 GHz (Options
010, E10)
10 MHz to 110 GHz (Options
011, E11)
Operating wavelength range 1260 nm to 1620 nm
1
Internal laser wavelength 1310 nm ± 20 nm (Options 100
102)
1550 nm ± 20 nm (Options 101
102)
Maximum optical input power
+14 dBm
Specifications for testing optical transmitters at 1310 nm
IF 带宽设置
条件：Group delay uncertainty - Derived from phase uncertainty, see section “Group delay uncertainty”.
1. For maximum available average output power from LCA Optical Transmitter output.
2. Average value over frequency range
3. Except phase wrap aliasing (Example: A DUT group delay of 5 ns (1 m cable length) requires a frequency step size of
≤ 0.2 GHz to avoid phase wraps). Excluding a constant group delay offset of < ± 0.3 ns typical.
(Cable length uncertainty < ± 0.06 m). A c onstant group delay offset leads to a phase offset ΔΦ = 360 × ΔGD × fmod (in deg).
4. 6 dB higher noise floor for Options N4372E- E10, N4372E- E11.
• 300 Hz IFBW (“Reduce IF bandwidth at low frequency” enabled) with measurement points on a
10 MHz raster (if not stated otherwise) for relative frequency response uncertainty
• 10 Hz IFBW (“Reduce IF bandwidth at low frequency” enabled) with measurement points on a
100 MHz raster (if not stated otherwise) for minimum measurable frequency response
System specifications DUT response
10 MHz to 200 MHz
> 200 MHz to
1 GHz
> 1 GHz to
26.5 GHz
> 26.5 GHz to
64 GHz
≤ 100 GHz
(Options
010, E10)
≤ 110 GHz
(Options
011, E11)
Relative frequency response uncertainty 1 ≥
–3 dBe
- ≤ ± 0.2 dBe ≤ ± 0.2 dBe ≤ ± 0.3 dBe ≤ ± 0.9 dBe (010, E10
011)
(typical) ≤ ± 0.3 dBe - - ≤ ± 0.2 dBe ≤ ± 0.6 dBe (010, E10
011)
≤
± 0.9 dBe (E11)
Absolute frequency response uncertainty (typical)
1
≥ –3 dBe ≤ ± 0.9 dBe ≤ ± 0.8 dBe ≤ ± 0.8 dBe ≤ ± 0.8 dBe ≤
± 1.1 dBe
Frequency response repeatability (typical) 1 ≥ –3 dBe ≤ ± 0.2 dBe ≤ ± 0.1 dBe ≤ ± 0.1 dBe ≤ ± 0.1 dBe ≤
± 0.3 dBe
Minimum measurable freq. response (noise floor) -
4
- –71 dB (W/A) –76 dB (W/A) –63 dB (W/A)
–52 dB (W/A)
(typical) –52 dB (W/A) –74 dB (W/A) –79 dB (W/A) –66 dB (W/A)
–55 dB (W/A)
Phase uncertainty (typical) 1, 2, 3 ≥ –3 dBe ≤ ± 2.2° ≤ ± 0.2° ≤ ± 0.2° ≤ ± 0.7° ≤
± 3.6°
Example: ± 2.0° →
± 8 ps (1 GHz aperture)
Specifications for testing optical transmitters at 1550 nm
IF 带宽设置
条件：Group delay uncertainty - Derived from phase uncertainty, see section “Group delay uncertainty”.
1. For maximum available average output power from LCA Optical Transmitter output.
2. Average value over frequency range
3. Except phase wrap aliasing (Example: A DUT group delay of 5 ns (1 m cable length) requires a frequency step size of
< ± 0.06 m). A c onstant group delay offset leads to a phase offset ΔΦ = 360 × ΔGD × fmod (in deg).
All specifications of the N5290A, N5291A PNA MM-Wave System apply, depending on selected options.
Please see the corresponding PNA MM-Wave System data sheet and User’s Guide.
• 300 Hz IFBW (“Reduce IF bandwidth at low frequency” enabled) with measurement points on a
10 MHz raster (if not stated otherwise) for relative frequency response uncertainty
• 10 Hz IFBW (“Reduce IF bandwidth at low frequency” enabled) with measurement points on a
100 MHz raster (if not stated otherwise) for minimum measurable frequency response
System specifications DUT response
10 MHz to 200 MHz
> 200 MHz to
1 GHz
> 1 GHz to
26.5 GHz
> 26.5 GHz to
64 GHz
≤ 100 GHz
(Options
010, E10)
≤ 110 GHz
(Options
011, E11)
Relative frequency response uncertainty 1 ≥
–3 dBe
- ≤ ± 0.2 dBe ≤ ± 0.2 dBe ≤ ± 0.3 dBe ≤ ± 0.6 dBe (010, E10
011)
(typical) ≤ ± 0.2 dBe - - ≤ ± 0.2 dBe ≤ ± 0.5 dBe (010, E10
011)
≤
± 0.6 dBe (E11)
Absolute frequency response uncertainty (typical)
1
≥ –3 dBe ≤ ± 0.9 dBe ≤ ± 0.8 dBe ≤ ± 0.8 dBe ≤ ± 0.8 dBe ≤
± 1.0 dBe
Frequency response repeatability (typical) 1 ≥ –3 dBe ≤ ± 0.1 dBe ≤ ± 0.1 dBe ≤ ± 0.1 dBe ≤ ± 0.1 dBe ≤
± 0.3 dBe
Minimum measurable freq. response (noise floor) -
2
- –72 dBe –80 dBe –67 dBe
–55 dBe
(typical) –54 dBe –74 dBe –81 dBe –69 dBe
–59 dBe
Phase uncertainty (typical) 1, 2, 3 ≥ –3 dBe ≤ ± 0.9° ≤ ± 0.2° ≤ ± 0.2° ≤ ± 0.5° ≤
± 2.8°
Example: ± 2.0° →
± 8 ps (1 GHz aperture)
≤ 0.2 GHz to avoid phase wraps). Excluding a constant group delay offset of <
± 0.3 ns typical. (Cable length uncertainty
Specifications for electrical-electrical measurements (E/E measurement mode)
Group delay
Group delay is computed by measuring the phase change within a specified aperture (for aperture see
PPℎaaaaaa ccℎaaaaaaaa [±ddaaaa]
AAAAaaAAAAAAAAaa [HHHH]∗360 (Equation
1)
PPℎaaaaaa AAaaccaaAAAAaauuaaAAuu [±ddaaaa]
条件：For more details see the specifications of the N5290A, N5291A PNA MM-Wave System.
AAAAaaAAAAAAAAaa [HHHH]∗360 ∗ √2 (Equation
2)
Determined by the frequency span and the number of points per sweep:
AAAAAAAAAAAAAAAA = ffAAaaffAAaaaaccuu aaAAaaaa aaAAnnnnaaAA ooff AAoouuaaAAaa−1 (Equation
3)
Group 延迟范围
The maximum group delay is limited to measuring no more than
± 180 degrees of phase change within
the selected aperture (see Equation
1).
五、通用规格
LCA controller Laser output
Wavelengths 1310 nm ± 20 nm (Options 100
102)
1550 nm ± 20 nm (Options 101
102)
Output power
+14 dBm
Fiber type Panda polarization maintaining fiber (PMF). Electrical field is oriented in slow
axis, · line（含） 连接器 key
Laser safety Information All laser sources listed above are classified as Class
1M according to IEC
60825-1 (2014).
All laser sources comply with 21 CFR
1040.10 except for deviations pursuant
to Laser Notice No. 50, dated
2007-06-24.
LCA optical transmitter
LCA optical transmitter Laser input
1
Wavelength range
1260 nm to 1620 nm, excluding water absorption wavelengths
Maximum optical input power
+17 dBm
Insertion loss, characteristic
11 dB at 1310 nm (Options E10, E11)
8 dB at 1310 nm (Options 010
011)
6 dB at 1550 nm
Fiber type Panda Polarization Maintaining Fiber (PMF). Electrical field is oriented in slow
Optical output
Average output power range of optical transmitter with internal laser (typical)
−5 dBm to +1 dBm at 1310 nm (Options E10, E11)
−2 dBm to +4 dBm at 1310 nm (Options 010
011)
−1 dBm to +5 dBm at 1550 nm
Fiber type Panda Polarization Maintaining Fiber (PMF). Electrical field is oriented in slow
电气输入
条件：1. Required source characteristics: SMSR > 35 dB, line width < 10 MHz, power stability < 0.1 dB pp, PER > 20 dB, unmodulated,
RF connector
1 mm, male, rugged
Maximum RF input power +21 dBm RF
8 V DC
LCA optical 接收机 Optical 输入
Wavelength range
1260 nm to 1620 nm, excluding water absorption wavelengths
最大值 linear average 输入功率 (典型值)
+1 dBm at 1310 nm (Options E10, E11)
+4 dBm at 1310 nm (Options 010
011)
+5 dBm at 1550 nm
Average power measurement range (typical)
–25 dBm to +5 dBm
Maximum safe optical input power
+14 dBm
绝对平均功率测量不确定度 (典型值)
≤
± 0.5 dB
电气输出
RF connector
1 mm, male, rugged
Maximum input level No RF signal
8 V DC
环境条件
条件：Environmental conditions LCA controller, LCA optical transmitter, LCA optical receiver
Storage temperature
–40 °C to +65 °C
Operating temperature
+10 °C to +35 °C
Specified temperature range
+20 °C to +26 °C
Relative humidity
15% to 80%, non-condensing
Maximum operating altitude
2000 m (6600 ft)
六、通用规格
Net weight LCA test set controller
8 kg (18 lbs)
LCA optical receiver
1 kg (2 lbs)
LCA optical transmitter
1 kg (2 lbs)
Power requirements Max.
400 VA
AC 100 V to 240 V ±10%
50 Hz to 60 Hz (LCA test set controller)
For weight, dimensions, space requirements and power requirements of the broadband network analyzer,
please refer to the manual of the Keysight Technologies N5290/1A PNA Series
2-Port and 4-Port
Microwave Network Analyzer System (900 Hz - 110 GHz /900 Hz - 120 GHz) at
Mechanical outline drawings
2-port mmWave system (dimensions in mm)
Mechanical outline drawings
4-port mmWave system (dimensions in mm)
Option Test set configurations; must choose one
N4372E-301 LCA for testing transmitters (E/O measurements)
N4372E-310 LCA for testing receivers (O/E measurements)
N4372E-311 LCA for testing transmitters and receivers (O/E, E/O, O/O measurements)
Option Receiver test wavelength options, available with N4372E-310
-311; must choose one
N4372E-100 Test Set with 1310 nm source
N4372E-101 Test Set with 1550 nm source
N4372E-102 Test Set with 1310 nm and 1550 nm source
Option Receiver test bandwidth options, available with N4372E-310
-311; must choose one
N4372E-E10 Operating frequency range for testing receivers up to 100 GHz
N4372E-E11 Operating frequency range for testing receivers up to 110 GHz
N4372E-010 Operating frequency range for testing receivers up to 100 GHz, available with N4372E-101
N4372E-011 Operating frequency range for testing receivers up to 110 GHz, available with N4372E-101
选件连接器选件; must choose one
N4372E-021 Straight FC/PC
N4372E-022 Angled FC/APC
Option
2-Port PNA/ PNA-X configurations
N4372E-221 PNA, 2-port, 26.5 GHz (N5222B-201
-020) with config. test set, IF inputs
N4372E-222 PNA, 2-port, 26.5 GHz (N5222B-205
-020) with config. test set, IF inputs, LFE
N4372E-223 PNA, 2-port, 26.5 GHz (N5222B-219
-020) with config. test set, IF inputs, bias-tee, attenuators
N4372E-224 PNA-X, 2-port, 26.5 GHz (N5242B-201
-020) with config. test set, IF inputs
N4372E-225 PNA-X, 2-port, 26.5 GHz (N5242B-205
-020) with config. test set, IF inputs, LFE
N4372E-226 PNA-X, 2-port, 26.5 GHz (N5242B-219
-020) with config. test set, IF inputs, bias-tee, attenuators
N4372E-229 Integration of customer’s 26.5 GHz, 2 Port PNA(-X) B with at least Option -020
-201
N4372E-271 PNA, 2-port, 67 GHz (N5227B-201
-020) with config. test set, IF inputs
N4372E-272 PNA, 2-port, 67 GHz (N5227B-205
-020) with config. test set, IF inputs, LFE
N4372E-273 PNA, 2-port, 67 GHz (N5227B-219
-020) with config. test set, IF inputs, bias-tee, attenuators
N4372E-274 PNA-X, 2-port, 67 GHz (N5247B-201
-020) with config. test set, IF inputs
N4372E-275 PNA-X, 2-port, 67 GHz (N5247B-219
-020) with config. test set, IF inputs, bias-tee, attenuators
N4372E-279 Integration of customer’s 67 GHz, 2-port PNA(-X) B with at least Option -020
-201
N4372E-299 Integration of customer’s 110/120 GHz
2-port PNA(-X) B system
Option Millimeter-wave test set controller for 2-port PNA/ PNA-X (required)
N4372E-TC2 Test set controller
2-port (N5292A-200)
Option Interconnect kits for 2-Port PNA/PNA-X
N4372E-IK1 Interconnect kit for 2-port PNA(-X) with 3.5 mm ports (N5292A-222)
N4372E-IK2 Interconnect kit for 2-port PNA(-X) with 2.4 mm or 1.85 mm ports (N5292A-224)
Option
4-port PNA/ PNA-X configurations
N4372E-421 PNA, 4-port, 26.5 GHz (N5222B-401
-020) with config. test set, IF inputs
N4372E-422 PNA, 4-port, 26.5 GHz (N5222B-405
-020) with config. test set, IF inputs, LFE
N4372E-423 PNA, 4-port, 26.5 GHz (N5222B-419
-020) with config. test set, IF Inputs, bias-tee, attenuators
N4372E-424 PNA-X, 4-port, 26.5 GHz (N5242B-401
-020) with config. test set, IF inputs
N4372E-425 PNA-X, 4-port, 26.5 GHz (N5242B-419
-020) with config. test set, IF inputs, bias-tee, attenuators
N4372E-426 PNA-X, 4-port, 26.5 GHz (N5242B-425
-020) with config. test set, IF inputs, LFE, attenuators
N4372E-429 Integration of customer’s 26.5 GHz, 4-port PNA(-X) B with at least Option -020
-401
N4372E-471 PNA, 4-port, 67 GHz (N5227B-401
-020) with config. test set, IF inputs
N4372E-472 PNA, 4-port, 67 GHz (N5227B-405
-020) with config. test set, IF inputs, LFE
N4372E-473 PNA, 4-port, 67 GHz (N5227B-419
-020) with config. test set, IF inputs, bias-tee, attenuators
N4372E-474 PNA-X, 4-port, 67 GHz (N5247B-401
-020) with config. test set, IF inputs
N4372E-475 PNA-X, 4-port, 67 GHz (N5247B-419
-020) with config. test set, IF inputs, bias-tee, attenuators
N4372E-476 PNA-X, 4-port, 67 GHz (N5247B-425
-020) with config. test set, IF inputs, LFE, attenuators
N4372E-479 Integration of customer’s 67 GHz, 4-port PNA(-X) B with at least Option -020
-401
N4372E-499 Integration of customer’s 110/120 GHz
4-port PNA(-X) B system
Option Millimeter-wave test set controller for 4-port PNA/ PNA-X (required)
N4372E-TC4 Test set controller
4-port (N5292A-400)
Option Interconnect kits for 4-port PNA/ PNA-X
N4372E-IK3 Interconnect kit for 4-port PNA(-X) with 3.5 mm ports (N5292A-442)
N4372E-IK4 Interconnect kit for 4-port PNA(-X) with 2.4 mm or 1.85 mm ports (N5292A-444)
Option Frequency extender heads (2 required for single-ended devices, min.
3 for balanced devices)
N4372E-FE1 Frequency extender 110 GHz
1.2 m cable (N5293AX01)
N4372E-FE2 Frequency extender 110 GHz
1.2 m cable, LFE, bias-tee (N5293AX03)
N4372E-FE3 Frequency extender 120 GHz
1.2 m cable (N5295AX01)
N4372E-FE4 Frequency extender 120 GHz
1.2 m cable, LFE, bias-tee (N5295AX03)
选件 Recommended 校准 kits 和附件
N4372E-801 Calibration kit
1 mm, DC to 120 GHz (85059B)
N4372E-802 USB thermocouple power sensor, DC to 120 GHz (U8489A)
N4372E-803 Verification kit
1 mm (85059V)
Option LCA optical head upgrade; must choose one
N4372EU-301 Upgrade from LCA for testing TX (N4372E-301) to LCA for testing TX and RX (N4372E-311)
Option Receiver test wavelength options, available with N4372EU-301; must choose one
N4372EU-100 Test Set with 1310 nm Source
N4372EU-101 Test Set with 1550 nm Source
N4372EU-102 Test Set with 1310 nm and 1550 nm source
Option Receiver test bandwidth options, available with N4372EU-301; must choose one
N4372EU-E10 Operating frequency range for testing receivers up to 100 GHz
N4372EU-E11 Operating frequency range for testing receivers up to 110 GHz
N4372EU-010 Operating frequency range for testing receivers up to 100 GHz, available with N4372EU-101
N4372EU-011 Operating frequency range for testing receivers up to 110 GHz, available with N4372EU-101
Option LCA optical head upgrade for N4372E-310 (RX testing)
以上指标摘自厂家官方数据手册，完整定义、测试条件与保证值口径以手册为准。完整指标、测试条件与定义口径请见产品页「软件和手册 | 白皮书」栏目中的官方数据手册。
是德科技 | KEYSIGHT · onetest 仪器资源库
全部
是德科技官方渠道
官方渠道（官网 / 热线 / 邮箱）
• 销售服务热线
800-810-0189（座机）／400-810-0189（手机） 工作时间 周一至周五 8:30-17:30
• 热线传真
800-820-2816（座机）／400-820-3863（手机）
• 亚洲区支持邮箱 tm_asia@keysight.com
• 服务与支持邮箱
instruments_services@keysight.com
• 官网
www.keysight.com（中国站 www.keysight.com.cn）
全国办事处
• 北京总部
是德科技（中国）有限公司 北京市朝阳区望京北路3号
电话：(010) 64397888
传真：(010) 64390278
邮编：100102
• 上海分公司
上海市虹口区四川北路1350号中信泰富申虹广场5楼、16-19楼
电话：(021) 36127688
传真：(021) 36127188
邮编：200080
• 广州分公司
广州市天河北路233号中信广场66层07-08室
电话：(020) 38113988
传真：(020) 86695074
邮编：510613
• 深圳分公司
深圳市福田中心区福华一路六号免税商务大厦3楼
电话：(0755) 83079588
传真：(0755) 82763181
邮编：518048
• 成都分公司
成都高新区南部园区天府四街116号
电话：(028) 83108888
传真：(028) 85330830
邮编：610041
• 西安分公司
西安市碑林区南关正街88号长安国际大厦D座5/F
电话：(029) 88867770
传真：(029) 88861330
邮编：710068
• 中国香港
是德科技香港有限公司 中国香港北角电气道169号25楼
电话：(852) 31977777
传真：(852) 25069292 香港热线 800-938-693
• 维修 / 校准服务中心
中国大陆 北京 / 成都 / 苏州 服务热线 800-810-0189 / 400-810-0189
授权分销商
• 上海信果电子科技有限公司（上海）
上海市沪闵路8075号虹梅商务大厦6楼609室
邮编：200233
电话：021-64518399
传真：021-54560890
邮箱：jason.wu@signalgroup.com.tw
• 上海精测电子有限公司（上海）
上海市北京东路668号西楼15E
邮编：200001
电话：13916371522
传真：021-53086102
邮箱：yangzhen@jingce.com
• 北京东方中科集成科技股份有限公司（北京）
北京市海淀区复兴路69号院12号楼2层、7层 邮政编码：100039
邮编：100039
电话：400-650-5566
传真：010-68728001
邮箱：zhangzp@oimec.com.cn
官网：www.dfzk.com/br_keysight.html
• 北京千聚科技发展有限公司（北京）
北京市海淀区西三旗花园雪梨澳乡A区23-4号
邮编：100085
电话：010-82907162
邮箱：zhuqihui@qianjukeji.com.cn
• 北京金龙翌阳科技发展有限公司（北京）
北京市海淀区大柳树路17号富海大厦2001室
邮编：100086
电话：010-62167379/6213538
邮箱：zhy@yy17.com
官网：www.yy17.com
• 厦门同昌源电子有限公司（厦门）
厦门市湖里区悦华路215号综合楼二楼C单元
邮编：361000
电话：0592-5663715
传真：0592-2236795
邮箱：tcydz@xmtcy.com
• 合肥新普仪测科技有限公司（合肥）
安徽省合肥市长江路53号长江大厦1102室
邮编：230001
电话：+86(0551)65177518 ext:
传真：+86(0551)6260 7155
邮箱：hfsimple@mail.hf.ah.cn
• 品展国际贸易(上海)有限公司（上海）
上海外高桥保税区泰谷路18号1号楼1105A室
邮编：200003
电话：+86(0512) 6808 6023
传真：+86(0512) 6808 6025
邮箱：melody@chtek.com.tw
官网：chtek.com.tw
• 广州康祺科技发展有限公司（广州）
广州市天河区华强路1号珠控国际中心8层06单元
邮编：510623
电话：020-38295200
传真：020-38295122
邮箱：baobao@kontchi.com
• 广州科欣仪器有限公司（广州）
广州市黄埔区黄埔大道933号209室
邮编：510700
电话：86-20-38699788
传真：86-20-34395932
邮箱：cs@gzkexin.com.cn
• 成都安诚迅飞电子科技有限公司（成都）
成都市武侯区人民南路四段27号1栋1单元 24层3号
邮编：610041
电话：028-86027579
邮箱：jincai.he@ancentest.com
• 新亚制程（浙江）股份有限公司（深圳）
深圳市福田区中康路卓越城梅林中心广场（北区）一期1栋3楼
邮编：518035
电话：0755-23818536
传真：0755-23818625
邮箱：wangrongbin@sunyes.cn
• 无锡市邦达测量科技有限公司（无锡）
江苏省无锡市新区长江北路112号
邮编：214028
电话：0510-85258521 ext:
邮箱：bdyiqi@bdyiqi.com
• 武汉力德仪测科技有限公司（武汉）
武汉市光谷大道54号国际企业中心四期A座501室
邮编：430074
电话：027-85481090 ext:
邮箱：liuyang@leader-e.com
• 苏州工业园区贝奇仪器有限公司（苏州）
苏州工业园区通园路398号海逸大厦A402室
邮编：215006
电话：0512-62883832
邮箱：szbeiqi@szbeiqi.net
• 青岛鲁芯仪器有限公司（青岛）
青岛市福州北路135号鼎都1号写字楼328室
邮编：266007
电话：15953279543
传真：0532-80669058-830
邮箱：gaochangyuan@qdluxin.com
• Avnet Electronics Marketing（Phoenix）
2211 South 47th Street
邮编：85034
电话：+65 6289 9164
邮箱：Josephine.Cheong@avnet.com
官网：OnlineSupportAsia@Avnet.com
• RFMW, Ltd.（San Jose）
188 Martinvale Lane
邮编：95119
电话：#09-129
邮箱：sales@rfmw.asia
官网：www.rfmw.com
• 沈阳实拓科技有限公司（沈阳）
沈阳市和平区三好街35号8层
邮编：110004
电话：024-23843636
传真：024-23905232
邮箱：lf@shituokeji.cn
• 領先科儀有限公司（香港）
新界荃灣海盛路3號TML廣場21樓B5室
邮编：.
电话：852-31523600
传真：852-31523608
邮箱：allenma@advanceinst.com
租赁合作伙伴
• 深圳君鉴科技股份有限公司（深圳市）
光明街道观光路华强创意产业园3栋B座12楼光明新区
邮编：518107
电话：400-860-3035
邮箱：shichang@chrent.com
• 益莱储（北京）检测设备租赁有限公司（北京市）
来广营高科技产业园区4号楼3层301朝阳区
邮编：100102
电话：400-819-2800
邮箱：jim.chen@electrorent.com
• 北京东方中科集成科技股份有限公司科技租赁事业部（北京市）
北京市海淀区阜成路67号银都大厦12层
邮编：100142
电话：400-650-5566
传真：010-68728001
邮箱：wangml@oimec.com.cn
• 客而禧设备租赁（上海）有限公司（Shanghai）
徐汇区古美路1515号19号楼903室
邮编：201102
电话：021-54453166
邮箱：krc@krcchina.com
• 深圳市瑞普高电子有限公司（深圳市）
天安云谷产业园一期3栋D座1505-1506龙岗区
邮编：518129
电话：0755-29050100
邮箱：rickluo@ruipugao.com
• 苏州锦凡精密仪器科技有限公司（苏州）
苏州市高新区滨河路625号创业大厦5幢505
邮编：215011
电话：18914031336
邮箱：18914031336@jfsz.net
解决方案合作伙伴
• Tokyo Weld Co., Ltd.（Ota-ku）
2-28-1 Kitamagome
邮编：143-0021
电话：81-3-3775-4331
传真：81-3-3775-4359
邮箱：d-imai@tokyoweld.com
• 上海恒榉电子科技有限公司（Shanghai）
上海市奉贤区南桥镇西闸公路1036号3栋2层
邮编：201401
电话：18112779808
邮箱：salesvalue@everise-hj.com
• 佳燁科技股份有限公司(Ghiatek)（桃園市龜山區）
光明街243巷2號
邮编：33372
电话：+886-3-350-9960
传真：+886-3-320-3475
邮箱：support@ghiatek.com
• 华美博科技（北京）有限公司（北京市）
蓝靛厂东路2号金源时代商务中心C座9A2海淀区
邮编：100097
电话：010-88598732
邮箱：sino@sino-microtech.com
• 和创联合科技（北京）有限公司（北京市）
中关村东路18号财智国际大厦A座1612海淀区
邮编：100083
电话：400 650 7802
邮箱：info@hisuntest.com
• 昆山捷得立电子有限公司（昆山市）
登云路288号海创大厦C座25楼
邮编：215316
电话：0512-36831748
邮箱：sales@jiedeli-china.com
• 深圳市捷泰普科技有限公司（深圳市）
宝安区西乡街道前进二路桃源居南面深圳市智汇创新中心A座216室
邮编：518126
电话：0755-83908488
邮箱：sales@jtptech.cn
• 深圳市易捷测试技术有限公司（深圳市）
福虹路9号世贸广场C座1203室福田区
邮编：518033
电话：0755-83698930
邮箱：dongni.zhang@gbit.net.cn
官网：gbit.net.cn
• 深圳市泰仕捷科技有限公司（深圳市）
松岗大道7号汉海达大厦616室宝安区
邮编：518105
电话：0755-27128586
邮箱：riky.gua@tesijet.com
• 深圳市蓉声科技有限公司（深圳市）
福中路海连大厦连天阁 1103 室福田区
邮编：518033
电话：13828880571
邮箱：jiang.qian@radiation-test.com
• 苏州伊欧陆系统集成有限公司（苏州）
星湖街218号生物纳米园A7楼305室苏州工业园区
邮编：215000
电话：4008808776
邮箱：info@eoulu.com
• EM Labs Inc.（Kobe）
1-4-13 Mizukasadori, Nagata
邮编：653-0842
电话：+81-50-5370-0262
邮箱：info@emlabs.jp
• MPI Corporation（Chupei）
No. 155 Chungho Street
邮编：302
电话：+886-3-555-1771
传真：+886-3-551-8381
邮箱：info@mpi-corporation.com
官网：www.mpi-corporation.com/ast
• NOFFZ（Tönisvorst）
Vorster Strasse 238
邮编：47918
电话：+49 2151-99878-0
邮箱：info@noffz.com
• Power Technology Solutions（Santa Clara）
3048 Scott Blvd
邮编：95054
电话：650-308-8091 ext:
传真：408-727-0827
邮箱：inquiries@pwrts.com
• Resillion（Hasselt）
Kempische Steenweg 303
邮编：3500
电话：+32 498 92 01 71
邮箱：global-ci-sales@resillion.com
• Suzhou Link Ways Tech Co., Ltd.（Suzhou）
16F, Block B, Jin Shi Wang Hu Building, No. 18, Jia Rui alley, SIP
邮编：215021
电话：+86 512 6602 8998
• 上海凌测电子科技有限公司（上海）
峨山路91弄120号陆家嘴软件园8号楼401A室浦东新区
邮编：200127
电话：021-61090608
邮箱：yue.lin@merlintest.com.cn
• 上海北汇信息科技有限公司（上海市）
秀路100号虹桥总部1号4号楼3C闵行区紫
邮编：201103
电话：021-34716271
邮箱：info@polelink.com
官网：polelink.com
• 上海怿星电子科技有限公司（上海市）
钦州北路1199号智汇园87号楼5F室徐汇区
邮编：200233
电话：021-64955659
邮箱：biz@e-planet.cn
• 东昇电磁兼容技术(深圳)有限公司（深圳市）
福田中心区26-3路中国凤凰大厦2栋25G
邮编：518026
电话：0755-82792411
邮箱：sales@jstoyo.cn
• 南京派格测控科技有限公司（南京市）
建邺区建邺人才服务大厦16楼
邮编：210019
电话：4008920858
邮箱：sales@pgtec.cn
官网：pgtec.cn
• 南京纳特通信电子有限公司（南京市）
江宁开发区临淮街20号
邮编：210012
电话：025-84471796
邮箱：sales@rflight.cn
• 深圳市研辰科技有限公司（深圳市）
益田路3008号皇都广场C座2815室福田区
邮编：518048
电话：0755-82828703
邮箱：roger_huang@ascentest.com
原厂翻新与二手仪器
• 是德科技原厂二手仪器商城（Keysight Certified Pre-Owned）：www.keysight.com/used/cn/zh/
• 原厂翻新仪器经与新品相同的最终测试与校准，原厂保修最长 5 年；享 40%–90% 折扣，另有线上 5% / 教育 15% 优惠
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758