客服
频率1MHz至44GHz
1 GHz 时的输出功率：+20 dBm
频率转换：28 ms (meas)
1 GHz 时的谐波：-46 dBc
1 GHz 时，20 kHz 频偏处的相位噪声
ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号厂商登录
类似产品
6kHz 至 44GHz 宽频覆盖1/2 通道内部基带最大 2GHz 射频调制带宽内置宽带基带信号发生器，集成 PSK/MSK/APSK/FSK/QAM 等数字调制具备 AWGN、扫频、相位噪声、衰落信道等干扰模拟支持 LTE / 5G NR / WiFi / DVB 波形发生软件
SP240(9KHz~40GHz)频率范围:9KHz~40GHz输出功率:-135dBm~+30dBm相位噪声(1GHz载波):-147dBc/Hz(10KHz频偏)频率切换速度:≤190 us窄脉冲宽度:20 ns
频率范围6kHz至13/20/33/45/53/67/110GHz射频调制带宽：500MHz/1GHz/2GHz单边带相位噪声（典型值，10GHz载波@10kHz频偏）-132dBc/Hz输出功率：-120dBm至+20dBm
同厂商产品
9 kHz 至6/8.5/14/20/31.8/44/54GHz（使用 V3080A 频率扩展器可达到 110 GHz）每个通道高达 2.5 GHz 调制带宽（利用 channel bonding 技术可达到 5 GHz）每个机箱多达 4 个通道业界优异的性能先进的实时应用
频率1MHz至14/20/31.8/44GHz1 GHz 时的输出功率：+20 dBm频率转换：28 ms (meas)1 GHz 时的谐波：-46 dBc1 GHz 时，20 kHz 频偏处的相位噪声
VXG-m系列M9383B 1MHz至44GHz模块化双通道微波信号发生器 2GHz带宽|是德/KEYSIGHT (停产)
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
是德科技|KEYSIGHT
VXG-m 微波信号发生器
模块化 PXI 信号源
产品简介
M9383B 是一款大量程电压测量设备，能够同时从多个通道采集动态变化的正电压电平。
核心参数
• 基带发生器模式：Waveform Playback
• 波形播放存储：1024 MSa
• 频率：44 GHz
• 1 GHz 谐波：-46 dBc
• 1 GHz 输出功率：20 dBm
• 1 GHz 相位噪声（20 kHz 偏移）：-137 dBc/Hz
• 频率选件：44 GHz
• 性能等级：◆◆◆◆◆◇
• 扫描模式：—
• 1 GHz 非谐波：-50 dBc
• 带宽选件：2 GHz
• 形态：模块化
• 类型：Vector
• 最高频率：44 GHz
• 1 GHz 相位噪声（10 kHz 偏移）：-137 dBc/Hz
• 最大调制带宽：2 GHz
• 最大输出功率：20 dBm
• 最大带宽：2 GHz
• 频率切换速度：28000 µs
• 输出路数：2
资源下载
以上内容与指标均取自是德科技（KEYSIGHT）官网该产品详情页与官方产品资料，未标注口径的为厂家公布值。
是德科技|KEYSIGHT · onetest 仪器资源库
是德科技 | KEYSIGHT
VXG-m系列M9383B 1MHz至44GHz模块化双通道微波信号发生器 2GHz带宽 详细指标
模块化 PXI 信号源
一、环境规格
环境规格和法规符合性
Temperature Operating 0 to 45 °C (single channel)
0 to 40 °C (dual channel)
Storage
-40 to +70 °C
Humidity Type tested at 95%, +40 °C (non-condensing) (From
40°C to 45°C
the maximum % relative humidity follows the line of constant dew
冲击/振动工作 random 振动
Type tested at 5 to 500 Hz
0.21 g rms
Survival random vibration
Type tested at 5 to 500 Hz
2.09 g rms
Functional shock Type tested at half-sine, 30 g
11 ms
Bench handling Type tested per MIL-PRF-28800F
Altitude Operating
3,000 m (Up to 10,000 feet approx.)
Storage
4,572 m (Up to 15,000 feet)
EMC Complies with European EMC Directive
条件：humidity, shock, vibration, altitude and power-line conditions. Test
– IEC/EN
61326-1
– CISPR Pub 11 Group
1, class A
– AS/NZS CISPR
11
– ICES/NMB-001
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada.
Environmental testing Samples of this product have been type tested in accordance with
the Keysight Environmental Test Manual and verified to be robust
against the environmental stresses of storage, transportation and
end-use. Those stresses include but are not limited to temperature,
methods are aligned with IEC
60068-2 and levels are similar to
MIL-PRF-28800F Class
3.
二、物理规格
Weight Single channel (F14 or F20)
29 kg (63.2 lbs.)
Single channel (F32 or F44)
30 kg (66 lbs.)
Dual channel (F14 or F20)
32 kg (71.2 lbs.)
Dual channel (F32 or F44)
35 Kg (77.2 lbs.)
Dimensions (L x W x H) 578 mm x 450 mm x
190 mm (approx.)
最大值功耗 (典型值)
Single channel
640 W
Dual channel
1000 W
Resolution 1280 x
768 pixels
Size
10.6 in (26.9 cm) diagonal
数据存储
条件：Connectors Type Description 19.2 GHz Out 1 SMA female Output of 19.2 GHz CW frequency reference, cabled from the factory to 19.2 GHz In. This port is always-on level is 7.3 dBm (nominal), if alternate 19.2 GHz In is provided this port should be terminated with
interface; off by default. High impedance when off, 50 Ω when on, level is +15 dBm (nominal).
Internal Removable solid state drive (240 GB)
External Supports USB
3.0/2.0 compatible memory devices
M9384B VXG Input and Output Connectors
M9384B front panel connectors
50 Ω load.
19.2 GHz Out
2 SMA female Output of 19.2 GHz CW frequency reference switched from user
interface; off by default. High impedance when off
50 Ω when on
level is
7.3 dBm (nominal).
100 MHz Out SMB male Output of 100 MHz CW frequency reference, switched from the user
Trig
1 SMB male For options F32/F44, reserved for future use.
For options F14/F20 with Options PME/PMR Pulse Video Out outputs
signal following envelope of RF pulse
条件：Instruments with Option 002 have connector for CH2.
3.3 V into high impedance. 50 Ω impedance (nominal). Damage level
is ± 5 V. Instruments with Option 002 have connector for CH2.
Instruments with Option 002 have connector for CH2.
AM In BNC female Reserved for future use. 50 Ω impedance (nominal). Damage level
is 10 V peak, 5 V rms. Instruments with Option 002 have connector
Pulse In BNC female For options PME/PMR externally provided Pulse modulation signal.
1 MΩ impedance (nominal). Damage level is 10 V peak, 5 V rms.
Instruments with Option 002 have connector for CH2.
into high impedance. 50 Ω impedance (nominal). Damage level is ±
5 V. Instruments with Option 002 have connector for CH2.
impedance. 50 Ω impedance (nominal). Damage level is ± 5 V.
Instruments with Option 002 have connector for CH2.
Trig
2 SMB male For options F32/F44, reserved for future use.
For options F14/F20 with Options PME/PMR Pulse Sync Out outputs
signal (trigger) related to pulse timing. VOL < 0.4 V, VOH is
2.8 V to
Settled SMB male Output signal to determine when the signal level is settled: logic
High while settled and low (approximately
0v) when change is in
progress. CMOS +3.3 V Logic. Damage level is < -5 V and >
6.5 V.
EFC In SMB male Reserved for future use. ESD damage level is
30 V.
LF1 Out SMB male Reserved for future use.
for CH2.
Pulse Video Out SMB male For options F32/F44 with Options PME/PMR, outputs signal
following envelope of RF pulse. VOL < 0.4 V, VOH is
2.8 V to 3.3 V
Pulse Sync Out SMB male For options F32/F44 with options PME/PMR, outputs signal (trigger)
related to pulse timing. VOL < 0.4 V, VOH is
2.8 V to 3.3 V into high
RF Out
1/2 Option F32/F44 – 2.4
mm male
条件：(nominal). Instruments with Option 002 have connector for CH2.
Option F14/F20 –
APC
3.5 mm male
RF Output signal, level selected by user interface.
50 Ω impedance
M9384B front panel connectors (continued)
连接器类型说明
条件：(nominal). 50 Ω impedance (nominal). Damage level is ± 2 V.
CH2 I Out SMA female For instruments with Option 002, outputs the in-phase component of
MHz (nominal). 50 Ω impedance (nominal). Damage level is ± 2 V.
Frequency range is DC to 1000 MHz (nominal). 50 Ω impedance
(nominal). Damage level is ± 2 V.
1000 MHz (nominal). 50 Ω impedance (nominal). Damage level is ±
CH2 Q Out SMA female For instruments with Option 002, outputs the quadrature component
1000 MHz (nominal). 50 Ω impedance (nominal). Damage level is ±
Out. Frequency range is DC to 1000 MHz (nominal). 50 Ω
impedance (nominal). Damage level is ± 2 V.
CH1 I+ In SMA female For option EXT, externally supplied analog in-phase component of
Frequency range is DC to 1000 MHz (nominal). 50 Ω impedance
(nominal). Damage level is 5 V peak, 1 V rms.
CH2 I In SMA female For Option EXT and Option 002, input for in-phase component of
MHz (nominal). 50 Ω impedance (nominal). Damage level is 5 V
CH1 I- In SMA female For option EXT, externally supplied analog in-phase component of
of phase from I+ In. Frequency range is DC to 1000 MHz (nominal).
50 Ω impedance (nominal). Damage level is 5 V peak, 1 V rms.
CH1 Q+ In SMA female For Option EXT, externally supplied analog quadrature-phase
generator. Frequency range is DC to 1000 MHz (nominal). 50 Ω
impedance (nominal). Damage level is 5 V peak, 1 V rms.
CH2 Q In SMA female For option EXT and Option 002, input for quadrature component of
MHz (nominal). 50 Ω impedance (nominal). Damage level is 5 V
CH1 Q- In SMA female For Option EXT, externally supplied analog quadrature-phase
1000 MHz (nominal). 50 Ω impedance (nominal). Damage level is 5
operation. +5 dBm (nominal). 50 Ω impedance (nominal). Damage
CH1 +I Out SMA female Analog in-phase component of I/Q modulation from channel
1’s
internal baseband generator. Frequency range is DC to 1000 MHz
channel
2’s analog I/Q modulation. Frequency range is DC to 1000
CH1 -I Out SMA female Analog in-phase component of I/Q modulation from channel
1’s
internal baseband generator
180° out of phase from +I Out.
CH1 +Q Out SMA female Analog quadrature-phase component of I/Q modulation from
channel
1’s internal baseband generator. Frequency range is DC to
2 V.
of channel
2’s analog I/Q modulation. Frequency range is DC to
2 V.
CH1 -Q Out SMA female Analog quadrature-phase component of I/Q modulation from
channel 1’s internal baseband generator
180° out of phase from +Q
I/Q modulation to channel
1’s internal baseband generator.
channel
2’s analog I/Q modulation. Frequency range is DC to 1000
peak
1 V rms.
I/Q modulation to channel 1’s internal baseband generator
180° out
component of I/Q modulation to channel
1’s internal baseband
channel
2’s analog I/Q modulation. Frequency range is DC to 1000
peak
1 V rms.
component of I/Q modulation to channel
1’s internal baseband
generator 180° out of phase from Q+ In. Frequency range is DC to
V peak
1 V rms.
19.2 GHz In SMA female Input for 19.2 GHz CW frequency reference required for instrument
level is
+20 dBm.
M9384B front panel connectors (continued)
wired-or of the two channels
条件：Ctrl M uHDMI female Reserved for future use. Damage level is < -5 V and > 6.5 V.
Ctrl S uHDMI female Reserved for future use. Damage level is < -5 V and > 6.5 V.
USB 3.0 USB Type-A female Host controller, SuperSpeed, 900 mA (nominal)
USB 2.0 USB Type-A female Host controller, high-speed, 1.2 A (nominal)
Display Port DisplayPort For external display devices. Display port dual mode DisplayPort++
(DVI-D, VGA, HDMI with an adapter)
NOTE: To duplicate the instrument’s application on an external
display it is recommended to set the resolution to 1280x768.
功率 Green LED Indicates 功率开
条件：Power Yellow LED Indicates AC power is connected and some internal circuitry is live.
Connectors Type Description 10 MHz In BNC female Externally supplied 10 MHz CW frequency reference, switched by the user interface; off by default. Input level -3 dBm to +20 dBm (nominal), 50
dBm (nominal). 50 Ω impedance (nominal). ESD damage level is 30 V.
EXT CLK IN. This port is always-on level is +15 dBm (nominal). If
impedance (nominal). Damage level is ± 5 V.
impedance (nominal). Damage level is ± 5 V. Unused if Option 002 is not
M9384B rear panel connectors
Ω impedance. ESD damage level is
30 V.
10 MHz Out BNC female Output of 10 MHz CW frequency reference, this port is always on.
+15
100 MHz Out SMA female Output of 100 MHz CW frequency reference, cabled from the factory to
alternate EXT CLK IN is provided this port should be terminated with 50 Ω
load. Connector for CH1 and CH2.
CH1 EXT 1 BNC female External baseband generator trigger input for channel 1.
10 kΩ input
CH2 EXT 1 BNC female External baseband generator trigger input for channel 2.
10 kΩ input
条件：CH1 SYNC OUT BNC female Output of TTL High as assigned to Signal’s Marker Setup for channel 1.
(nominal). Damage level is ± 5 V.
CH2 SYNC OUT BNC female Output of TTL High as assigned to Signal’s Marker Setup for channel 2.
(nominal). Damage level is ± 5 V. Unused if Option 002 is not present.
operation. +10 dBm (nominal). 50 Ω impedance (nominal). Damage level
VOL < 0.4 V, VOH is 2.8 V to 3.3 V into high impedance.
50 Ω impedance
VOL < 0.4 V, VOH is 2.8 V to 3.3 V into high impedance.
50 Ω impedance
EXT CLK IN SMA female Input of an external
100 MHz reference clock required for instrument
is +20 dBm. One per channel, channel 2 is unused if option
002 is not
GPIB Micro-D 25-pin IEEE-488.2
1987 with listen and talk. Use accessory Y1260A for GPIB
LAN RJ45 Ethertwist GbE
10/100/1000BASE-T Ethernet: the LAN supports DHCP, connection
monitoring, dynamic hostname services, TCP/IP communication, TCP
三、M9383B 物理规格
模块尺寸外形尺寸 (L x W x H) 重量
M9312B 3 PXIe slots 205 mm x 61.8 mm x 130 mm
1.9 kg (4.2 lbs.)
M9314B 1 PXIe slot 205 mm x 21.2 mm x 130 mm
0.6 kg (1.4 lbs.)
M9323A 1 PXIe slot 205 mm x 21.2 mm x 130 mm
0.6 kg (1.4 lbs.)
M9343A 3 PXIe slots 205 mm x 61.8 mm x 130 mm
1.6 kg (3.6 lbs.)
M9347A 1 PXIe slot 205 mm x 20.2 mm x 130 mm
0.7 kg (1.6 lbs.)
最大值功耗 (典型值)
Single channel
630 W
Dual channel
990 W
M9383B VXG-m Input and Output Connectors
M9312B input and output connectors
Connectors Type Description 4.8 GHz In APC female (3.5 mm) Inputs a 4.8 GHz reference clock from the M9043A Chassis
4.8
GHz Out
1 connector.
4.8 GHz Out APC female (3.5 mm) Outputs a copy of 4.8 GHz signal accepted by the
4.8 GHz In
LO 2 Out APC female (3.5 mm) Outputs either a copy of LO 1 In signal or a doubled copy of LO
1
In signal (selectable) to the M9314B LO
1 In connector.
100 MHz In SMP male Inputs a 100 MHz reference signal from the M9043A Chassis
100
MHz Out
3 connector.
100 MHz Out SMP male Outputs a copy of the 100 MHz reference signal (received by
100
MHz In connector) to the M9347A Ref In connector.
LF Out SMP male Outputs a waveform from the internal function generator or a copy
of the AM modulated signal
条件：AM In SMP male Reserved for future use. 0 to 1 MHz (nominal). 1.0 V (nominal) for
100% AM. 1 MΩ impedance (nominal). Damage level is ± 15 V.
Trig 1 SMP male Accepts a bi-directional trigger signal from the M9343A Ext
2
Trig 2 SMP male Accepts a bi-directional trigger signal from the M9314B Trig
2
Sync Out SMP male Accepts a bidirectional signal used for synchronization with other
LO 1 In SMA female Accepts an LO signal between
400 MHz and 10 GHz from the
M9347A Synth
1 Out connector.
LO 1 Out SMA female Outputs either a copy of LO 1 In signal or a doubled copy of LO
1
In signal (selectable) to the M9343A LO
1 In connector.
RF Out Female (2.4 mm) Outputs an RF signal between
1 MHz and 20 GHz to the M9323A
RF In connector when Aux Out is connected to Aux In. Otherwise,
outputs the signal to the Aux Out connector attenuated by the
selected 衰减值
条件：Aux Out SMA female Provides an output signal to the M9314B Aux In connector.
Aux In SMA female Accepts an input signal between
1 MHz to 44 GHz from the
M9314B Aux Out connector.
RF 2 In SMA female Inputs an IF signal between
400 MHz and 3.2 GHz from the
M9343A RF
2 Out connector.
RF 1 In SMA female Inputs an IF signal between
3.2 GHz and 20 GHz from the
M9314B RF
1 Out connector.
M9314B input and output connectors
连接器类型说明
条件：signal. 1 MΩ impedance (nominal). Damage level is 10 V peak, 5
Trig 1 SMP male For options PME/PMR externally provided pulse modulation
V rms
条件：Trig 2 SMP male Outputs the trigger signal to the M9312B Trig 2 connector.
Sync SMP male Accepts a bidirectional signal used for synchronization with other
条件：AM Out SMP male Reserved for future use. 50 Ω impedance (nominal). Damage
AM In SMP male Accepts an external amplitude modulated signal with 50%/volt or
20 dB/volt (selectable).
level is 10 V peak
5 V rms.
LO 1 In Female (2.4 mm) Inputs an LO signal between
22 GHz and 38 GHz from the
M9312B LO
2 Out connector.
RF 1 Out SMA female Outputs a copy of the RF 1 In signal to the M9312B RF
1 In
RF 1 In SMA female Inputs the IF signal between
400 MHz and 20 GHz from the
M9343A RF
1 Out connector.
Aux In SMA female Accepts an input signal between
1 MHz and 20 GHz from the
M9312B Aux Out connector.
Aux Out Female (2.4 mm) Provides a RF output as either the upconverted signal from RF
1
In connector or the Aux In signal to the M9312B Aux In connector.
M9323A input and output connectors
连接器类型说明
Trig 1 SMP male For Options F32/F44 with Options PME/PMR, outputs signal following envelope
of RF pulse. VOL < 0.4 V, VOH is 2.8 V to 3.3 V into high impedance.
50 Ω
阻抗 (标称值)
Damage level is
± 5 V.
Trig 2 SMP male For Options F32/F44 with Options PME/PMR, outputs signal (trigger) related to
pulse timing. VOL < 0.4 V, VOH is 2.8 V to 3.3 V into high impedance.
50 Ω
阻抗 (标称值)
条件：Sync SMP male Accepts a bidirectional signal used for synchronization with other modules.
RF 1 Out Female (2.4 mm) RF Output signal, level selected by user interface. 50 Ω impedance (nominal).
RF 1 In Female (2.4 mm) Accepts a RF signal from the M9312B RF Out connector.
Damage level is
± 5 V.
M9343A input and output connectors
Sync SMB male Intended for future use
条件：Ext 1 SMB male External trigger input. 10 kΩ input impedance (nominal).
Ext 2 SMB male Outputs the trigger signal to the M9312B Trig 1 connector.
Ext Clk In SMB male Inputs a 100 MHz signal from the M9043A Chassis 100 MHz Out 4 connector.
Damage level is
± 5 V.
Aux Port Reserved for future use
条件：I+ Input SMP male For option EXT, externally supplied analog in-phase component of I/Q
MHz (nominal). 50 Ω impedance (nominal). Damage level is 5 V peak, 1 V rms.
I- Input SMP male For option EXT, externally supplied analog in-phase component of I/Q
modulation to internal baseband generator, 180° out of phase from I+ In.
Frequency range is DC to 1000 MHz (nominal). 50 Ω impedance (nominal).
Q+ Input SMP male For option EXT, externally supplied analog quadrature-phase component of I/Q
MHz (nominal). 50 Ω impedance (nominal). Damage level is 5 V peak, 1 V rms.
Q- Input SMP male For option EXT, externally supplied analog quadrature-phase component of I/Q
modulation to internal baseband generator, 180° out of phase from Q+ In.
Frequency range is DC to 1000 MHz (nominal). 50 Ω impedance (nominal).
generator. Frequency range is DC to 1000 MHz (nominal). 50 Ω impedance
(nominal). Damage level is ± 2 V.
180° out of phase from +I Out. Frequency range is DC to 1000 MHz (nominal).
50 Ω impedance (nominal). Damage level is ± 2 V.
generator. Frequency range is DC to 1000 MHz (nominal).
50 Ω impedance (nominal). Damage level is ± 2 V.
USB Port Reserved for future use. Not for use with USB devices.
modulation to internal baseband generator. Frequency range is DC to 1000
Damage level is 5 V peak
1 V rms."
modulation to internal baseband generator. Frequency range is DC to 1000
Damage level is 5 V peak
1 V rms.
I+ Output SMP male Analog in-phase component of I/Q modulation from internal baseband
I- Output SMP male Analog in-phase component of I/Q modulation from internal baseband generator,
Q+ Output SMP male Analog quadrature-phase component of I/Q modulation from internal baseband
Q- Output SMP male Analog quadrature-phase component of I/Q modulation from int
以上指标摘自厂家官方数据手册，完整定义、测试条件与保证值口径以手册为准。完整指标、测试条件与定义口径请见产品页「软件和手册 | 白皮书」栏目中的官方数据手册。
是德科技 | KEYSIGHT · onetest 仪器资源库
全部
是德科技官方渠道
官方渠道（官网 / 热线 / 邮箱）
• 销售服务热线
800-810-0189（座机）／400-810-0189（手机） 工作时间 周一至周五 8:30-17:30
• 热线传真
800-820-2816（座机）／400-820-3863（手机）
• 亚洲区支持邮箱 tm_asia@keysight.com
• 服务与支持邮箱
instruments_services@keysight.com
• 官网
www.keysight.com（中国站 www.keysight.com.cn）
全国办事处
• 北京总部
是德科技（中国）有限公司 北京市朝阳区望京北路3号
电话：(010) 64397888
传真：(010) 64390278
邮编：100102
• 上海分公司
上海市虹口区四川北路1350号中信泰富申虹广场5楼、16-19楼
电话：(021) 36127688
传真：(021) 36127188
邮编：200080
• 广州分公司
广州市天河北路233号中信广场66层07-08室
电话：(020) 38113988
传真：(020) 86695074
邮编：510613
• 深圳分公司
深圳市福田中心区福华一路六号免税商务大厦3楼
电话：(0755) 83079588
传真：(0755) 82763181
邮编：518048
• 成都分公司
成都高新区南部园区天府四街116号
电话：(028) 83108888
传真：(028) 85330830
邮编：610041
• 西安分公司
西安市碑林区南关正街88号长安国际大厦D座5/F
电话：(029) 88867770
传真：(029) 88861330
邮编：710068
• 中国香港
是德科技香港有限公司 中国香港北角电气道169号25楼
电话：(852) 31977777
传真：(852) 25069292 香港热线 800-938-693
• 维修 / 校准服务中心
中国大陆 北京 / 成都 / 苏州 服务热线 800-810-0189 / 400-810-0189
授权分销商
• 上海信果电子科技有限公司（上海）
上海市沪闵路8075号虹梅商务大厦6楼609室
邮编：200233
电话：021-64518399
传真：021-54560890
邮箱：jason.wu@signalgroup.com.tw
• 上海精测电子有限公司（上海）
上海市北京东路668号西楼15E
邮编：200001
电话：13916371522
传真：021-53086102
邮箱：yangzhen@jingce.com
• 北京东方中科集成科技股份有限公司（北京）
北京市海淀区复兴路69号院12号楼2层、7层 邮政编码：100039
邮编：100039
电话：400-650-5566
传真：010-68728001
邮箱：zhangzp@oimec.com.cn
官网：www.dfzk.com/br_keysight.html
• 北京千聚科技发展有限公司（北京）
北京市海淀区西三旗花园雪梨澳乡A区23-4号
邮编：100085
电话：010-82907162
邮箱：zhuqihui@qianjukeji.com.cn
• 北京金龙翌阳科技发展有限公司（北京）
北京市海淀区大柳树路17号富海大厦2001室
邮编：100086
电话：010-62167379/6213538
邮箱：zhy@yy17.com
官网：www.yy17.com
• 厦门同昌源电子有限公司（厦门）
厦门市湖里区悦华路215号综合楼二楼C单元
邮编：361000
电话：0592-5663715
传真：0592-2236795
邮箱：tcydz@xmtcy.com
• 合肥新普仪测科技有限公司（合肥）
安徽省合肥市长江路53号长江大厦1102室
邮编：230001
电话：+86(0551)65177518 ext:
传真：+86(0551)6260 7155
邮箱：hfsimple@mail.hf.ah.cn
• 品展国际贸易(上海)有限公司（上海）
上海外高桥保税区泰谷路18号1号楼1105A室
邮编：200003
电话：+86(0512) 6808 6023
传真：+86(0512) 6808 6025
邮箱：melody@chtek.com.tw
官网：chtek.com.tw
• 广州康祺科技发展有限公司（广州）
广州市天河区华强路1号珠控国际中心8层06单元
邮编：510623
电话：020-38295200
传真：020-38295122
邮箱：baobao@kontchi.com
• 广州科欣仪器有限公司（广州）
广州市黄埔区黄埔大道933号209室
邮编：510700
电话：86-20-38699788
传真：86-20-34395932
邮箱：cs@gzkexin.com.cn
• 成都安诚迅飞电子科技有限公司（成都）
成都市武侯区人民南路四段27号1栋1单元 24层3号
邮编：610041
电话：028-86027579
邮箱：jincai.he@ancentest.com
• 新亚制程（浙江）股份有限公司（深圳）
深圳市福田区中康路卓越城梅林中心广场（北区）一期1栋3楼
邮编：518035
电话：0755-23818536
传真：0755-23818625
邮箱：wangrongbin@sunyes.cn
• 无锡市邦达测量科技有限公司（无锡）
江苏省无锡市新区长江北路112号
邮编：214028
电话：0510-85258521 ext:
邮箱：bdyiqi@bdyiqi.com
• 武汉力德仪测科技有限公司（武汉）
武汉市光谷大道54号国际企业中心四期A座501室
邮编：430074
电话：027-85481090 ext:
邮箱：liuyang@leader-e.com
• 苏州工业园区贝奇仪器有限公司（苏州）
苏州工业园区通园路398号海逸大厦A402室
邮编：215006
电话：0512-62883832
邮箱：szbeiqi@szbeiqi.net
• 青岛鲁芯仪器有限公司（青岛）
青岛市福州北路135号鼎都1号写字楼328室
邮编：266007
电话：15953279543
传真：0532-80669058-830
邮箱：gaochangyuan@qdluxin.com
• Avnet Electronics Marketing（Phoenix）
2211 South 47th Street
邮编：85034
电话：+65 6289 9164
邮箱：Josephine.Cheong@avnet.com
官网：OnlineSupportAsia@Avnet.com
• RFMW, Ltd.（San Jose）
188 Martinvale Lane
邮编：95119
电话：#09-129
邮箱：sales@rfmw.asia
官网：www.rfmw.com
• 沈阳实拓科技有限公司（沈阳）
沈阳市和平区三好街35号8层
邮编：110004
电话：024-23843636
传真：024-23905232
邮箱：lf@shituokeji.cn
• 領先科儀有限公司（香港）
新界荃灣海盛路3號TML廣場21樓B5室
邮编：.
电话：852-31523600
传真：852-31523608
邮箱：allenma@advanceinst.com
租赁合作伙伴
• 深圳君鉴科技股份有限公司（深圳市）
光明街道观光路华强创意产业园3栋B座12楼光明新区
邮编：518107
电话：400-860-3035
邮箱：shichang@chrent.com
• 益莱储（北京）检测设备租赁有限公司（北京市）
来广营高科技产业园区4号楼3层301朝阳区
邮编：100102
电话：400-819-2800
邮箱：jim.chen@electrorent.com
• 北京东方中科集成科技股份有限公司科技租赁事业部（北京市）
北京市海淀区阜成路67号银都大厦12层
邮编：100142
电话：400-650-5566
传真：010-68728001
邮箱：wangml@oimec.com.cn
• 客而禧设备租赁（上海）有限公司（Shanghai）
徐汇区古美路1515号19号楼903室
邮编：201102
电话：021-54453166
邮箱：krc@krcchina.com
• 深圳市瑞普高电子有限公司（深圳市）
天安云谷产业园一期3栋D座1505-1506龙岗区
邮编：518129
电话：0755-29050100
邮箱：rickluo@ruipugao.com
• 苏州锦凡精密仪器科技有限公司（苏州）
苏州市高新区滨河路625号创业大厦5幢505
邮编：215011
电话：18914031336
邮箱：18914031336@jfsz.net
解决方案合作伙伴
• Tokyo Weld Co., Ltd.（Ota-ku）
2-28-1 Kitamagome
邮编：143-0021
电话：81-3-3775-4331
传真：81-3-3775-4359
邮箱：d-imai@tokyoweld.com
• 上海恒榉电子科技有限公司（Shanghai）
上海市奉贤区南桥镇西闸公路1036号3栋2层
邮编：201401
电话：18112779808
邮箱：salesvalue@everise-hj.com
• 佳燁科技股份有限公司(Ghiatek)（桃園市龜山區）
光明街243巷2號
邮编：33372
电话：+886-3-350-9960
传真：+886-3-320-3475
邮箱：support@ghiatek.com
• 华美博科技（北京）有限公司（北京市）
蓝靛厂东路2号金源时代商务中心C座9A2海淀区
邮编：100097
电话：010-88598732
邮箱：sino@sino-microtech.com
• 和创联合科技（北京）有限公司（北京市）
中关村东路18号财智国际大厦A座1612海淀区
邮编：100083
电话：400 650 7802
邮箱：info@hisuntest.com
• 昆山捷得立电子有限公司（昆山市）
登云路288号海创大厦C座25楼
邮编：215316
电话：0512-36831748
邮箱：sales@jiedeli-china.com
• 深圳市捷泰普科技有限公司（深圳市）
宝安区西乡街道前进二路桃源居南面深圳市智汇创新中心A座216室
邮编：518126
电话：0755-83908488
邮箱：sales@jtptech.cn
• 深圳市易捷测试技术有限公司（深圳市）
福虹路9号世贸广场C座1203室福田区
邮编：518033
电话：0755-83698930
邮箱：dongni.zhang@gbit.net.cn
官网：gbit.net.cn
• 深圳市泰仕捷科技有限公司（深圳市）
松岗大道7号汉海达大厦616室宝安区
邮编：518105
电话：0755-27128586
邮箱：riky.gua@tesijet.com
• 深圳市蓉声科技有限公司（深圳市）
福中路海连大厦连天阁 1103 室福田区
邮编：518033
电话：13828880571
邮箱：jiang.qian@radiation-test.com
• 苏州伊欧陆系统集成有限公司（苏州）
星湖街218号生物纳米园A7楼305室苏州工业园区
邮编：215000
电话：4008808776
邮箱：info@eoulu.com
• EM Labs Inc.（Kobe）
1-4-13 Mizukasadori, Nagata
邮编：653-0842
电话：+81-50-5370-0262
邮箱：info@emlabs.jp
• MPI Corporation（Chupei）
No. 155 Chungho Street
邮编：302
电话：+886-3-555-1771
传真：+886-3-551-8381
邮箱：info@mpi-corporation.com
官网：www.mpi-corporation.com/ast
• NOFFZ（Tönisvorst）
Vorster Strasse 238
邮编：47918
电话：+49 2151-99878-0
邮箱：info@noffz.com
• Power Technology Solutions（Santa Clara）
3048 Scott Blvd
邮编：95054
电话：650-308-8091 ext:
传真：408-727-0827
邮箱：inquiries@pwrts.com
• Resillion（Hasselt）
Kempische Steenweg 303
邮编：3500
电话：+32 498 92 01 71
邮箱：global-ci-sales@resillion.com
• Suzhou Link Ways Tech Co., Ltd.（Suzhou）
16F, Block B, Jin Shi Wang Hu Building, No. 18, Jia Rui alley, SIP
邮编：215021
电话：+86 512 6602 8998
• 上海凌测电子科技有限公司（上海）
峨山路91弄120号陆家嘴软件园8号楼401A室浦东新区
邮编：200127
电话：021-61090608
邮箱：yue.lin@merlintest.com.cn
• 上海北汇信息科技有限公司（上海市）
秀路100号虹桥总部1号4号楼3C闵行区紫
邮编：201103
电话：021-34716271
邮箱：info@polelink.com
官网：polelink.com
• 上海怿星电子科技有限公司（上海市）
钦州北路1199号智汇园87号楼5F室徐汇区
邮编：200233
电话：021-64955659
邮箱：biz@e-planet.cn
• 东昇电磁兼容技术(深圳)有限公司（深圳市）
福田中心区26-3路中国凤凰大厦2栋25G
邮编：518026
电话：0755-82792411
邮箱：sales@jstoyo.cn
• 南京派格测控科技有限公司（南京市）
建邺区建邺人才服务大厦16楼
邮编：210019
电话：4008920858
邮箱：sales@pgtec.cn
官网：pgtec.cn
• 南京纳特通信电子有限公司（南京市）
江宁开发区临淮街20号
邮编：210012
电话：025-84471796
邮箱：sales@rflight.cn
• 深圳市研辰科技有限公司（深圳市）
益田路3008号皇都广场C座2815室福田区
邮编：518048
电话：0755-82828703
邮箱：roger_huang@ascentest.com
原厂翻新与二手仪器
• 是德科技原厂二手仪器商城（Keysight Certified Pre-Owned）：www.keysight.com/used/cn/zh/
• 原厂翻新仪器经与新品相同的最终测试与校准，原厂保修最长 5 年；享 40%–90% 折扣，另有线上 5% / 教育 15% 优惠
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758