ONETEST 欢迎您
厂商登录 | 入驻
登录 | 注册 购物车 微信公众号
客服
厂商登录
类似产品
支持最多512个模拟通道带宽：最高2 GHz；实时采样率高达10 GSa/s垂直分辨率：最高12-bit低本底噪声，在2 GHz带宽下低至153 μVrms采用SPO 技术，波形捕获率最高达750 000 帧/秒（Sequence 模式）存储深度最高达500 Mpts/通道
模拟带宽：最高 2GHz最高实时采样率：10GSa/s模拟通道数：4最大存储深度：500Mpts最高波形捕获率：600,000 wfms/s
模拟带宽：最高 2GHz最高实时采样率：10GSa/s模拟通道数：4最大存储深度：500Mpts最高波形捕获率：600,000 wfms/s
S9110E 49.2GHz 收发信机 1.2GHz|是德科技 (在产)
参考价格 ：
产品描述
详细指标
软件和手册|白皮书
购买渠道
选件
问大家
视频
测评
口碑
系统与解决方案
是德科技|KEYSIGHT
VT5 系列矢量收发信机，用于 5G 多频段测试
宽带射频收发信机测试
产品简介
S9110E 是一款多频段收发信机系统，用于 5G/5G NTN/卫星通信非信令测量。S9110E 提供 1 MHz 至 49 GHz 的无间隙频率覆盖，带宽最高可达 1.2 GHz
核心参数
• 最高频率：49.2 GHz
• 无线制式：FR1, FR2, NTN
• 最大带宽：1.2 GHz
功能特性
• 应用
对 5G NR 或 NTN/卫星通信网络设备和射频组件进行大批量测试
测试 5G NR 基站收发信机系统
测试 5G NR 组件，包括远端射频头、分布式单元、有源天线阵列、放大器和芯片组
测试 NTN 设备，包括终端、用户设备、星载平台和网关
使用业界经验证的软件（N9085EM0E 5G NR 和 N9054EM0E/N9054EM1E VMA 测量应用）进行功率、
频谱发射模板（SEM）、邻道泄漏比（ACLR）、误差矢量幅度（EVM）等测量
通过选件 NA1 或 NA2 启用矢量网络分析功能
• 优势
与台式仪器相比，占用空间更小，测试成本更低，测试吞吐量极高（云就绪）
通过单个双向远端头和头内切换实现空口（OTA）就绪，
覆盖 22.7 GHz 至 49.2 GHz（是德科技 M1749B）频段的两个极化，节省空间和成本。
该配置在暗室中提供最佳功率和 EVM
凭借 1.2 GHz 带宽用于 Tx/Rx，确保低 EVM 和 ACLR，提升制造效率。
系统作为单台仪器运行，包含切换、远端头、API 和测量功能，并通过校准的系统精度实现轻松自动化，减少返工和误报
通过复用是德科技其他非信令解决方案（如 E6681A、S9110A/S9115A 或 S9101A）的现有代码，最大限度缩短测试开发时间
在同一系统中进行无缝信号测量，无需重新连接测试配置
• 功能
在 FR1（380 MHz 至 6 GHz）和 FR2（22.7 GHz 至 49.2 GHz）或 NTN（10 GHz 至 32 GHz）中生成并分析 5G NR（3GPP Release 15 及更高版本）波形的宽带信号
使用 N/Y9054EM0E/1E VMA 软件分析矢量调制和自定义 OFDM
通过支持一个或两个远端头和极化以及多个 Tx/Rx 通道的 OTA 友好可扩展架构，避免切换和长电缆敷设带来的高损耗
• 软件
Keysight S9110E 系统支持以下应用：Keysight N9085EM0E 5G NR 测量、
Y9085EM0E 5G NR 非信令波形与测量、N / Y9054EM0E 矢量调制分析数字解调测量，
以及 N / Y9054EM1E 矢量调制分析自定义 OFDM
其他推荐软件：N7608EMBC Signal Studio Pro 自定义调制、
N7631EMBC Signal Studio Pro 5G NR、N7608EMBC 自定义 IQ 和 OFDM，
以及 89600 VSA 软件
Keysight S9110E 多频段矢量收发仪基础系统包括单通道或双通道配置，覆盖 380 MHz 至 26.5 GHz。
与 M1749B 毫米波收发器连接时，S9110E 将其频率覆盖范围扩展至 22.7 GHz 至 49.2 GHz
资源下载
以上内容与指标均取自是德科技（KEYSIGHT）官网该产品详情页与官方产品资料，未标注口径的为厂家公布值。
是德科技|KEYSIGHT · onetest 仪器资源库
是德科技 | KEYSIGHT
S9110E 49.2GHz 收发信机 1.2GHz 详细指标
Wideband RF transceiver testing
一、Characteristics
条件：S9110E front panel connectors and the M9471A due to the M9155C switch module and cabling.
• The characteristics provided in this data sheet for operation at or below
26.5 GHz are a subset of the
specifications for the Keysight M9471A PXIe Vector Transceiver module. For the most recent detailed
performance information, refer to the M9471A Data Sheet (literature no.
3123-1722EN). Note that the
performance characteristics in that data sheet apply at the input/output connectors of the M9471A
module, but in the S9110E system, there is approximately
0.25 to 0.5 dB of insertion loss between the
• The sub
26.5 GHz amplitude characteristics in this data sheet include the effects of the added system
条件：Nominal (nom) Describes the expected mean or average performance, or an attribute whose performance is
by design, such as the 50 Ω connector. This data is measured at room temperature
(approximately 25 °C). Nominal performance is not warranted.
expected performance, such as amplitude drift vs. time. This data is measured at room
temperature (approximately 25 °C). Measured performance is not warranted.
Typical (typ) Describes additional product performance information that is not covered by the product
warranty. It is performance beyond specifications that 95% of the units exhibit with a
95%
confidence level at room temperature (approximately
25 °C). Typical performance does not
include measurement uncertainty. Typical performance is not warranted.
Measured (meas) Describes an attribute measured during the design phase for purposes of communicating
Recommended best practices
• Set chassis fan to high at environmental temperatures above
35 °C.
S9110E Standard Configurations
This data sheet contains system performance for the S9110E system that is available in two standard
configurations with multiple input and output connectors. Each configuration is also specified with extended
频率范围
条件：Note: Please refer to figures 1 through 3 below for locations of the referenced connections.
Standard configuration High frequency extension option Low frequency extension
S9110E-TR1 One RF and mmWave transceiver channel Option F49, enabled by M1749B Option LFE
S9110E-TR2 Two RF and mmWave transceiver channels Option F49, enabled by M1749B Option LFE
• Keysight S9110E-TR1 Multiband Vector Transceiver: one-channel base system configuration
• Keysight S9110E-TR2 Multiband Vector Transceiver: two-channel base system configuration
• Option F49: mmWave Transceiver Range
22.7 – 49.2 GHz
• Option LFE: Low frequency extension for 1 MHz
S9110E connectors (ports
1 to 6)
Figure
1. S9110E Multiband Vector Transceiver configurations
VNA port
1
RF In RF Out
Base Transceiver (1 MHz – 26.5 GHz)
mmWave Transceiver (M1749B
22 – 49 GHz)
Tx/Rx
2
Tx/Rx
1
RF In RF Out
条件：Each S9110E standard configuration has a different set of output and input connectors (ports):
• When ordering one S9110E-TR1 with option F49, you get one-channel standard configuration:
• When ordering one S9110E-TR2 with option F49, you get two-channel standard configuration:
Transceiver
1
VNA
1 and VNA2
Tx/Rx
2
Tx/Rx
1
VNA port
2
mmWave Transceiver (M1749B
22 – 49 GHz)
Transceiver
2
o mmWave ports on the M1749B mmWave transceiver that are RF Tx/Rx
1 and
RF Tx/Rx
2
o RF ports on the base instrument that are RF Out and RF In
o mmWave ports on the M1749B mmWave transceiver that are RF Tx/Rx
1 and
RF Tx/Rx
2
o RF ports on the base instrument that are RF Out and RF In
• When adding an VNA (NA1) on top of either TR1 or TR2, you get one
2-port vector network analyzer
that are VNA port 1 ⑤ and VNA port 2 ⑥. If you need add the second VNA, order at S9110E(U)-NA2
Capture depth
512 MSa
条件：Starting frequency extends to 10 MHz with option LFE, tunable to 1 MHz
All S9110E standard configurations RF
Transceiver connectors RF In
380 MHz to 26.5 GHz
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx 2
22.7 to 49.2 GHz, settable
信号分析带宽
All S9110E standard configurations RF
Transceiver connectors RF In
条件：Center frequency Maximum bandwidth (nominal) 1 to 380 MHz 40 MHz 1 380 to 550 MHz 100 MHz 550 MHz to 1.31 GHz 200 MHz
1.31 to 1.9 GHz
600 MHz
1.9 to 26.5 GHz
1.2 GHz
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
22.7 to 24.2 GHz
100 MHz
24.2 to 24.3 GHz
800 MHz
24.3 to 49.2 GHz
1.2 GHz
频率范围 Settable 输入电平范围
All S9110E standard configurations RF
Transceiver connectors
条件：1. Bandwidth reduces as 1 MHz edge frequency is approached. For the maximum bandwidth below center frequency 80 MHz,
2. This is settable input range in instrument software. For actual maximum allowed input level, refer to “Amplitude” specification of
RF In 380 MHz to 26.5 GHz
–150 dBm to +27 dBm
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx 2 22.7 to 49.2 GHz –100 dBm to +100 dBm
2
refer to M9471A data sheet
“RF Tx/Rx 1 and RF Tx/Rx
2 ” section of M1749B.
绝对幅度精度 (CW 模式)
条件：Frequency range Level Accuracy (nominal)
Frequency range Level Accuracy (nominal) 22.7 to 49.2 GHz –50 to –10 dBm ≤ ± 1.4 dB
All S9110E standard configurations
Transceiver connectors RF In 10 to 380 MHz –50 to 0 dBm ≤ ± 0.4 dB 380 MHz to 26.5 GHz –50 to 0 dBm ≤
± 0.5 dB
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
–10 to –5 dBm ≤
± 0.95 dB
All S9110E standard configurations
Transceiver connectors RF In
条件：Frequency range VSWR nominal 10 to 380 MHz 2.1 380 MHz to 9 GHz 1.9 9 to 26.5 GHz 2.3
Linearity (CW mode) (reference power level is
–5 dBm)
All S9110E standard configurations
Transceiver connectors RF In
条件：Frequency range Input level Linearity (nominal) 10 to 380 MHz –50 to 0 dBm ≤ ± 0.4 dB 380 MHz to 5 GHz –50 to 0 dBm ≤ ± 0.21 dB 5 to 26.5 GHz –50 to 0 dBm ≤ ± 0.3 dB
Frequency range Input level Linearity (nominal) 22.7 – 49.2 GHz –50 to –20 dBm ≤ ± 1.0 dB
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
–20 to –5 dBm ≤
± 0.75 dB
刻度 fidelity (CW 模式)
All S9110E standard configurations
Transceiver connectors RF In
条件：Frequency range Input level Scale fidelity (nominal) 10 to 380 MHz –50 to –30 dBm ≤ ± 0.15 dB
Frequency range Input level Scale fidelity (nominal) 22.7 – 49.2 GHz –50 to –30 dBm ≤ ± 0.9 dB
–30 to 0 dBm ≤
± 0.05 dB
380 MHz to 5 GHz –50 to –30 dBm ≤
± 0.3 dB
–30 to 0 dBm ≤
± 0.1 dB
5 to 26.5 GHz –50 to –30 dBm ≤
± 0.6 dB
–30 to 0 dBm ≤
± 0.1 dB
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
–30 to –5 dBm ≤
± 0.3 dB
中频平坦度
条件：M1749B: The center frequency can be set > than 48.6 GHz, but bandwidth will be reduced as 49.2 GHz is approached.
All S9110E standard configurations RF
RF In
条件：Frequency range Bandwidth Flatness (nominal) 10 to 380 MHz 40 MHz ± 0.6 dB 380 to 550 MHz 40 MHz ± 0.5 dB 100 MHz ± 0.5 dB
Frequency range Bandwidth Flatness (nominal) 24.3 to 48.6 GHz 1.2 GHz ± 1.3 dB
Error Vector Magnitude (EVM) nominal
550 MHz to 1.31 GHz
40 MHz
± 0.5 dB
100 MHz
± 0.5 dB
200 MHz
± 0.5 dB
1.31 to 1.9 GHz
200 MHz
± 0.5 dB
400 MHz
± 0.8 dB
600 MHz
± 0.8 dB
1.9 to 3 GHz
200 MHz
± 0.5 dB
400 MHz
± 0.8 dB
600 MHz
± 0.8 dB
800 MHz
± 0.8 dB
1.2 GHz
± 0.8 dB
3 to 5 GHz
400 MHz
± 0.8 dB
600 MHz
± 0.9 dB
800 MHz
± 0.9 dB
1.2 GHz
± 1.0 dB
5 to 18 GHz
400 MHz
± 0.5 dB
600 MHz
± 0.5 dB
800 MHz
± 0.6 dB
1.2 GHz
± 0.8 dB
18 to 25.5 GHz
400 MHz
± 0.5 dB
600 MHz
± 0.6 dB
800 MHz
± 0.7 dB
1.2 GHz
± 0.9 dB
25.5 to 26.5 GHz
400 MHz
± 0.4 dB
600 MHz
± 0.6 dB
800 MHz
± 0.7 dB
1.2 GHz
± 0.8 dB
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
Test signal: FR1: 5G NR, 30 kHz subcarrier spacing, 256QAM, loopback; Test signal: FR2: 5G NR, 120 kHz subcarrier spacing
256QAM, loopback
All S9110E standard configurations
RF In
Input power range
–20 to 0 dBm
Center Frequency 100 MHz bandwidth 400 MHz bandwidth
8 x100 MHz bandwidth
4 GHz –50 dB –45 dB
–39 dB
5 GHz –47 dB –44 dB
–39 dB
7 GHz –47 dB –45 dB
–43 dB
12 GHz –47 dB –43 dB
–39 dB
15 GHz –47 dB –41 dB
–40 dB
18 GHz –46 dB –42 dB
–38 dB
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
Frequency range 100 MHz bandwidth 400 MHz bandwidth
8x100 MHz bandwidth
22.7 to 49.2 GHz
输入功率 EVM 输入功率 EVM 输入功率 EVM
条件：Test signal: Custom DFT–S OFDM, 1000 MHz bandwidth, loopback, nominal
–40 to –35 dBm –38 dB –40 to –30 dBm –33 dB –40 to –25 dBm
–29 dB
–35 to –5 dBm –41 dB –30 to –5 dBm –40 dB –25 to 0 dBm
–38 dB
All S9110E standard configurations
RF In
条件：Frequency range EVM (nominal) 2 to 26 GHz
Frequency range EVM (nominal) 22.7 to 49.2 GHz
Test signal: DVB–S2X, 500 MHz bandwidth, loopback, nominal; Equalizer filter length: 51; EVM normalization reference: Reference RMS
–10 dB
–40 to –30 dBm input power
–20 dB
–30 to –20 dBm input power
–29 dB
–20 to –10 dBm input power
–37 dB
–10 to 0 dBm input power
–33 dB
0 to 5 dBm input power
–17 dB
5 to 10 dBm input power
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
≤ –29 dB
–40 to –30 dBm input power
≤ –37 dB
–30 to –20 dBm input power
≤ –39 dB
–20 to –10 dBm input power
≤ –39 dB
–10 to –5 dBm input power
All S9110E standard configurations
RF In
条件：Frequency range EVM (nominal) 2 to 26 GHz
Frequency range EVM (nominal) 22.7 to 49.2 GHz
Adjacent Channel Leakage Ration (ACLR) nominal
–18 dB
–40 to –30 dBm input power
–23 dB
–30 to –20 dBm input power
–32 dB
–20 to –10 dBm input power
–36 dB
–10 to 0 dBm input power
–35 dB
0 to 5 dBm input power
–22 dB
5 to 10 dBm input power
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
≤ –32 dB
–40 to –30 dBm input power
≤ –40 dB
–30 to –20 dBm input power
≤ –42 dB
–20 to –10 dBm input power
≤ –42 dB
–10 to –5 dBm input power
All S9110E standard configurations
RF Transceiver connectors RF In
Input power –20 to 0 dBm
256QAM
条件：Bandwidth ACLR (nominal) 100 MHz BW
–56 dBc at 4 GHz, –54 dBc at 7 GHz
–52 dBc at 18 GHz
400 MHz BW –49 dBc at 4 GHz, –49 dBc at 7 GHz
–46 dBc at 18 GHz
8 x 100 MHz BW –45 dBc at 4 GHz, –46 dBc at 7 GHz
–42 dBc at 18 GHz
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
Frequency range
22.7 to 49.2 GHz
Input signal
256QAM, loopback
带宽 ACLR (标称值)
Input power ACLR Input power ACLR Input power ACLR 100 MHz BW –40 to –25 dBm –47 dBc –25 to –5 dBm –50 dBc 400 MHz BW –40 to –25 dBm –41 dBc –25 to –10 dBm –43 dBc –10 to –5 dBm –41 dBc 8 x 100 MHz –40 to –30 dBm –38 dBc –30 to –5 dBm
–41 dBc
平均显示噪声电平 (DANL), · IQ 分析仪模式
All S9110E standard configurations RF
Transceiver connectors RF In
条件：Frequency range DANL (nominal) 10 to 60 MHz –159 dBm/Hz 60 to 380 MHz –169 dBm/Hz 380 MHz to 5 GHz –165 dBm/Hz
Frequency range DANL (nominal) 22.7 to 23.5 GHz –166 dBm/Hz 23.5 to 24.4 GHz –167 dBm/Hz 24.4 to 24.9 GHz –166 dBm/Hz
Analyzer ranged to -70 dBm, LNA on
5 to 9 GHz
–166 dBm/Hz
9 to 12 GHz
–162 dBm/Hz
12 to 17.5 GHz
–162 dBm/Hz
17.5 to 20 GHz
–160 dBm/Hz
20 to 25 GHz
–157 dBm/Hz
25 to 26.5 GHz
–153 dBm/Hz
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
Analyzer ranged to -70 dBm
24.9 to 29 GHz
–167 dBm/Hz
29 to 31 GHz
–165 dBm/Hz
31 to 32 GHz
–167 dBm/Hz
32 to 34.8 GHz
–165 dBm/Hz
34.8 to 37.5 GHz
–163 dBm/Hz
37.5 to 38.5 GHz
–165 dBm/Hz
38.5 to 43 GHz
–162 dBm/Hz
43 to 46 GHz
–163 dBm/Hz
46 to 48 GHz
–160 dBm/Hz
48 to 49.2 GHz
–162 dBm/Hz
Residual response
条件：Analyzer ranged to 0 dBm, offset from 10 MHz to ½ × analysis bandwidth, nominal
All S9110E standard configurations RF
Transceiver connectors RF In
条件：Frequency range Residual response (nominal) 80 MHz to 4 GHz –93 dBm 4 to 5 GHz –79 dBm 5 to 10 GHz –87 dBm
Frequency range Residual response (nominal) 22.7 to 24.3 GHz –97 dBm 24.3 to 26.8 GHz –69 dBm 26.8 to 28.0 GHz –93 dBm
10 to 13.6 GHz
–80 dBm
13.6 to 14.9 GHz
–76 dBm
14.9 to 17.1 GHz
–88 dBm
17.1 to 18.7 GHz
–82 dBm
18.7 to 21.3 GHz
–86 dBm
21.3 to 22.4 GHz
–73 dBm
22.4 to 25.9 GHz
–81 dBm
25.9 to 26.5 GHz
–70 dBm
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
28.0 to 29.1 GHz
–76 dBm
29.1 to 33.3 GHz
–87 dBm
33.3 to 33.6 GHz
–59 dBm
33.6 to 41.0 GHz
–84 dBm
41.0 to 42.5 GHz
–74 dBm
42.5 to 47.3 GHz
–86 dBm
47.3 to 49.2 GHz
–81 dBm
ARB depth
512 MSa
条件：Starting frequency down to 10 MHz with option LFE, tunable to 1 MHz
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx 2
22.7 to 49.2 GHz, settable
All S9110E standard configurations RF
Transceiver connectors RF Out
380 MHz to 26.5 GHz
信号发生带宽
All S9110E standard configurations RF
Transceiver connectors RF Out
条件：Center frequency Maximum bandwidth (nominal) 1 to 380 MHz 40 MHz 1 380 to 550 MHz 100 MHz 550 MHz to 1.31 GHz 200 MHz
1.31 to 1.9 GHz
600 MHz
1.9 to 26.5 GHz
1.2 GHz
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
22.7 to 24.2 GHz
100 MHz
24.2 to 24.3 GHz
800 MHz
24.3 to 49.2 GHz
1.2 GHz
频率范围 Settable 幅度量程
S9110E option TR1 or TR2 RF transceiver
connectors RF Out 10 MHz to 26.5 GHz CW
–120 dBm to +20 dBm
Modulated: Depends on Crest Factor
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx 2 22.7 GHz – 49.2 GHz CW
–70dBm to +10 dBm
Modulated
–40 dBm to +5 dBm
S9110E option TR1 or TR2 RF transceiver
连接器 RF Out
条件：Frequency range VSWR (nominal) 10 to 380 MHz 1.8 380 MHz to 5 GHz 2.0 5 to 12 GHz 2.1
12 to 26.5 GHz
2.2
Linearity (CW mode) (reference power level is
–5 dBm)
S9110E option TR1 or TR2 RF transceiver
连接器 RF Out
条件：Frequency range Input level Linearity (nominal) 10 to 380 MHz –80 to –30 dBm ≤ ± 0.4 dB
Frequency range Input level Linearity (nominal) 22.7 – 49.2 GHz –50 to –30 dBm ≤ ± 1.5 dB
1. Bandwidth reduces as 1 MHz edge frequency is approached. For the maximum bandwidth below center frequency 80 MHz,
–60 to 0 dBm ≤
± 0.4 dB
380 MHz to 5 GHz –80 to –30 dBm ≤
± 1 dB
–60 to 0 dBm ≤
± 0.5 dB
5 to 26.5 GHz –80 to –30 dBm ≤
± 0.6 dB
–60 to 0 dBm ≤
± 0.5 dB
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
–30 to –5 dBm ≤
± 1.0 dB
refer to M9471A data sheet
绝对幅度精度 (CW 模式)
S9110E Option TR1 or TR2 RF transceiver
RF Out
条件：Frequency range Level Accuracy (nominal) 10 to 380 MHz –80 to 0 dBm ≤ ± 0.5 dB 380 MHz to 5 GHz –80 to –60 dBm ≤ ± 0.9 dB
Frequency range Level Accuracy (nominal) 22.7 to 49.2 GHz –50 dBm to –10 dBm ≤ ± 1.2 dB
–60 to 0 dBm ≤
± 0.7 dB
5 to 21 GHz –80 dBm ≤
± 1 dB
–80 to –30 dBm ≤
± 0.7 dB
–30 to 0 dBm ≤
± 0.4 dB
21 to 25.9 GHz –80 dBm ≤
± 1 dB
–80 to –30 dBm ≤
± 0.6 dB
–30 to 0 dBm ≤
± 0.4 dB
25.9 to 26.5 GHz –80 to –30 dBm ≤
± 1 dB
–30 to 0 dBm ≤
± 0.5 dB
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
–10 dBm to –5 dBm ≤
± 1.0 dB
中频平坦度
条件：When working with M1749B, the center frequency can be set > than 48.6 GHz, but bandwidth will be reduced as 49.2 GHz is approached.
All S9110E standard configurations RF
Transceiver connectors RF Out
条件：Frequency range Bandwidth Flatness (nominal) 10 to 380 MHz 40 MHz ± 0.5 dB 380 to 550 MHz 40 MHz ± 0.7 dB 100 MHz ± 0.7 dB
Frequency range Bandwidth Flatness (nominal) 24.3 to 48.6 GHz 1.2 GHz ± 1.5 dB
Error Vector Magnitude (EVM) nominal
550 MHz to 1.31 GHz
40 MHz
± 0.4 dB
100 MHz
± 0.4 dB
200 MHz
± 0.5 dB
1.31 to 1.9 GHz
200 MHz
± 0.8 dB
400 MHz
± 0.8 dB
600 MHz
± 0.9 dB
1.9 to 5 GHz
40 MHz
± 0.6 dB
100 MHz
± 0.6 dB
400 MHz
± 0.6 dB
600 MHz
± 0.7 dB
800 MHz
± 0.7 dB
1.2 GHz
± 0.7 dB
5 to 16 GHz
400 MHz
± 0.7 dB
600 MHz
± 0.7 dB
800 MHz
± 0.7 dB
1.2 GHz
± 0.8 dB
16 to 26.5 GHz
400 MHz
± 1.3 dB
600 MHz
± 1.3 dB
800 MHz
± 1.3 dB
1.2 GHz
± 1.3 dB
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
Test signal: FR1: 5G NR, 30 kHz subcarrier spacing, 256QAM, loopback; Test signal: FR2: 5G NR, 120 kHz subcarrier spacing
256QAM, loopback
All S9110E standard configurations RF
Transceiver connectors RF In
Input power range
–20 to 0 dBm
Center Frequency 100 MHz bandwidth 400 MHz bandwidth
8 x100 MHz bandwidth
4 GHz –50 dB –45 dB
–39 dB
5 GHz –47 dB –44 dB
–39 dB
7 GHz –47 dB –45 dB
–43 dB
12 GHz –47 dB –43 dB
–39 dB
15 GHz –47 dB –41 dB
–40 dB
18 GHz –46 dB –42 dB
–38 dB
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
Frequency range 100 MHz bandwidth 400 MHz bandwidth
8x100 MHz bandwidth
22.7 to 49.2 GHz
输入功率 EVM 输入功率 EVM 输入功率 EVM
条件：Test signal: Custom DFT–S OFDM, 1000 MHz bandwidth, loopback, nominal
–40 to –35 dBm –38 dB –40 to –30 dBm –33 dB –40 to –25 dBm
–29 dB
–35 to –5 dBm –41 dB –30 to –5 dBm –40 dB –25 to –5 dBm
–38 dB
All S9110E standard configurations RF
Transceiver connectors RF In
条件：Frequency range EVM (nominal) 2 to 26 GHz
Frequency range EVM (nominal) 22.7 to 49.2 GHz
Test signal: DVB–S2X, 500 MHz bandwidth, loopback, nominal; Equalizer filter length: 51; EVM normalization reference: Reference RMS
–10 dB
–40 to –30 dBm input power
–20 dB
–30 to –20 dBm input power
–29 dB
–20 to –10 dBm input power
–37 dB
–10 to 0 dBm input power
–33 dB
0 to 5 dBm input power
–17 dB
5 to 10 dBm input power
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
≤ –29 dB
–40 to –30 dBm input power
≤ –37 dB
–30 to –20 dBm input power
≤ –39 dB
–20 to –5 dBm input power
All S9110E standard configurations RF
Transceiver connectors RF In
条件：Frequency range EVM (nominal) 2 to 26 GHz
Frequency range EVM (nominal) 22.7 to 49.2 GHz
Adjacent Channel Leakage Ration (ACLR) nominal
–18 dB
–40 to –30 dBm input power
–23 dB
–30 to –20 dBm input power
–32 dB
–20 to –10 dBm input power
–36 dB
–10 to 0 dBm input power
–35 dB
0 to 5 dBm input power
–22 dB
5 to 10 dBm input power
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
≤ –32 dB
–40 to –30 dBm input power
≤ –40 dB
–30 to –20 dBm input power
≤ –42 dB
–20 to –10 dBm input power
≤ –42 dB
–10 to –5 dBm input power
All S9110E standard configurations RF
Transceiver connectors RF In
Input power –20 to 0 dBm
256QAM
条件：Bandwidth ACLR (nominal) 100 MHz BW
–56 dBc at 4 GHz, –54 dBc at 7 GHz
–52 dBc at 18 GHz
400 MHz BW –49 dBc at 4 GHz, –49 dBc at 7 GHz
–46 dBc at 18 GHz
8 x 100 MHz BW –45 dBc at 4 GHz, –46 dBc at 7 GHz
–42 dBc at 4 GHz
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
Frequency range
22.7 to 49.2 GHz
Input signal
256QAM, loopback
带宽 ACLR (标称值)
Input power ACLR Input power ACLR Input power ACLR 100 MHz BW –40 to –25 dBm –47 dBc –25 to –5 dBm –50 dBc 400 MHz BW –40 to –25 dBm –41 dBc –25 to –10 dBm –43 dBc –10 to –5 dBm –41 dBc 8 x 100 MHz –40 to –30 dBm –38 dBc –30 to –5 dBm
–41 dBc
绝对幅度精度 (CW 模式)
条件：Frequency range Absolute amplitude accuracy (nominal)
All S9110E standard configurations
Transceiver connectors RF In
Input level from –50 dBm to 0 dBm
1 to 380 MHz
±0.5 dB
380 MHz to 23.5 GHz
±0.8 dB
23.5 to 24.5 GHz
±1 dB
24.5 to 26.5 GHz
±0.8 dB
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx 2 22.7 to 49.2 GHz
±1.5 dB, input level from –50 to –10 dBm
±1.2 dB, input level from –10 to –5 dBm
Residual responses
条件：RF input port, with analyzer ranged to 0 dBm, offset from 10 MHz to ½ × analysis bandwidth, nominal
Frequency range Residual response (nominal)
All S9110E standard configurations
Transceiver connectors RF In 80 MHz to 4 GHz –98 dBm 4 to 5 GHz –106 dBm 5 to 10 GHz
–106 dBm
10 to 13.6 GHz
–107 dBm
13.6 to 14.9 GHz
–103 dBm
14.9 to 17.1 GHz
–105 dBm
17.1 to 18.7 GHz
–106 dBm
18.7 to 21.3 GHz
–105 dBm
21.3 to 22.4 GHz
–103 dBm
22.4 to 25.9 GHz
–99 dBm
25.9 to 26.5 GHz
–95 dBm
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
22.7 to 24.3 GHz
–102 dBm
24.3 to 26.8 GHz
–71 dBm
26.8 to 28 GHz
–86 dBm
28 to 29.1 GHz
–70 dBm
29.1 to 33.3 GHz
–69 dBm
33.3 to 33.6 GHz
–57 dBm
33.6 to 41 GHz
–56 dBm
41 to 42.5 GHz
–103 dBm
42.5 to 47.3 GHz
–60 dBm
47.3 to 49.2 GHz
–83 dBm
Displayed Average Noise Floor (DANL)
条件：Frequency range Displayed average noise floor, nominal
All S9110E standard configurations
Transceiver connectors RF In
Input ranged to -70 dBm, LNA on
1 to 10 MHz
–155 dBm/Hz
10 to 310 MHz
–160 dBm/Hz
310 MHz to 5 GHz
–161 dBm/Hz
5 to 9 GHz
–163 dBm/Hz
9 to 12 GHz
–157 dBm/Hz
12 to 17.5 GHz
–158 dBm/Hz
17.5 to 20 GHz
–155 dBm/Hz
20 to 25 GHz
–146 dBm/Hz
25 to 26.5 GHz
–134 dBm/Hz
M1749B mmWave connectors
RF Tx/Rx 1 and RF Tx/Rx
2
22.7 to 23.5 GHz
–164 dBm/Hz
23.5 to 29 GHz
–163 dBm/Hz
29 to 31 GHz
–165 dBm/Hz
31 to 32 GHz
–164 dBm/Hz
32 to 34.8 GHz
–163 dBm/Hz
34.8 to 37.5 GHz
–162 dBm/Hz
37.5 to 38.5 GHz
–160 dBm/Hz
38.5 to 43 GHz
–161 dBm/Hz
43 to 46 GHz
–162 dBm/Hz
46 to 48 GHz
–161 dBm/Hz
48 to 49.2 GHz
–163 dBm/Hz
二、环境规格
S9110E multiband vector transceiver
For indoor use only
Altitude up to 6,561.68 ft (2,000 m)
Operating temperature 15 to 35° C maximum relative humidity (non–condensing)
85% RH
电压 & 频率功耗
S9110E base system (PXIe chassis with
modules, rugged panel, and cables) 100/120 V, 50/60 Hz 220/240 V, 50/60 Hz 1200 W Max (lower range)
1300 W Max (upper range)
M1749B performance mmWave transceiver 120 VAC (via supplied 0950-6166 AC/DC adapter)
105 W
S9110E base system
Height
197.8 mm (7.79 in); with feet installed
Width
449.5 mm (17.70 in); with rugged panel
Depth 568.9 mm (22.40 in); with rugged panel (from back bumper to front BNC)
M1749B performance mmWave transceiver
Height
70 mm (2.76 in)
Width
175 mm (6.89 in)
Depth
345 mm (13.58 in)
S9110E–TR1 base system
18.6 kg (45.0 lbs)
S9110E–TR2 base system
21.9 kg (49.8 lbs)
M1749B performance mmWave transceiver
3.5 kg (7.7 lbs)
M9808A PXIe vector network analyzer
540 g (1.2 lbs)
远程编程
Interface LAN RJ–45
Standard
1–year warranty
校准周期
条件：The recommended calibration cycle is one year; calibration services are available through Keysight service centers.
LAN, Display Port, and USB Connectors, M9038A PXIe
Embedded Controller
LAN
1 and LAN2 (TCP/IP interface)
Connectors (Ethernet) One
10/100/1000 BASE-T (RJ-45)
One
100/1000/10GB BASE-T (RJ-45)
Connectors (video) One, DisplayPort++
USB
2.0 and 3.0
Connectors Two, USB
2.0 (Type A)
Connectors Two, USB
3.0 (Type A)
S9110E Base System Front Panel (with Rugged
前面板面板)
条件：Accuracy ± 16 Hz, typical, within 1 year since last calibration, from 20 to 30°C.
Frequency reference
100 MHz Ref Out and 10 MHz Ref In/Out connectors above the rugged front panel
100 MHz Ref Out, frequency reference (if available)
Refer to the Keysight M9300A PXIe Frequency Reference Data Sheet for details on
精度, 老化率, 和稳定度
Recommended calibration cycle
1 year
连接器 BNC (f)
条件：Accuracy ± 1.6 Hz, typical, within 1 year since last calibration, from 20 to 30°C.
Amplitude
9.5 dBm (nominal)
10 MHz Ref Out, Frequency Reference
Refer to the Keysight M9300A PXIe Frequency Reference Data Sheet for details on
精度, 老化率, 和稳定度
Recommended calibration cycle
1 year
连接器 BNC (f)
条件：Connects behind rugged panel to M9300A PXIe Reference Ref In and locks to another reference with a value from 1 to 110 MHz.
Amplitude
9.5 dBm (nominal)
10 MHz Ref In
连接器 BNC (f)
条件：Input amplitude 0 to 10 dBm (nominal)
front panel connect to the PXI [0:7] backplane trigger bus in the M9019A chassis and can be configured as Input or Output.
Frequency
1 MHz to 110 MHz, sine wave
Lock range
± 1 ppm (nominal)
Impedance
50 Ω (nominal)
Trig 1 and Trig
2 Connectors above the rugged front panel
Trig 1 and Trig
2
Connects behind rugged panel to M9019A PXIe Chassis Trig 1 and Trig 2. These two front panel trigger connectors (Trig 1 and Trig
2) above the rugged
Direction control Input or output (configurable)
Output level 3.3 V CMOS (TTL compatible
5 V tolerant)
Output impedance
50 Ω (typical)
Output trigger source PXI_Trig0 - PXI_Trig7 (Segment
2 or 3)
Input level 3.3 V CMOS (TTL compatible
5 V tolerant)
Input impedance
3 kΩ (typical)
Input trigger destination PXI_Trig0 - PXI_Trig7 (Segment
2 or 3)
Input threshold
1.65 V (typical)
Minimum swing
250 mV (typical)
Minimum pulse width
100 ns (typical)
Transceiver Connectors, RF
1 MHz to 26.5 GHz on the rugged front panel
RF In
条件：Connector Type-N (f), 50 Ω (nominal)
Frequency range
1 MHz to 26.5 GHz
Amplitude 0 VDC
+27 dBm maximum safe input power
RF Out
条件：Connector Type-N (f), 50 Ω (nominal)
Frequency range
1 MHz to 26.5 GHz
Amplitude 0 VDC
+30 dBm maximum applied reverse input power
Transceiver Connectors, Head mmWave
22.7 to 49.2 GHz on the rugged front panel
IF In, IF Out, and LO/Pwr/Ctrl Out connect to the M1749B.
IF In
条件：Connector Type-N (f), 50 Ω (nominal)
Frequency range
1 MHz to 26.5 GHz
Amplitude ± 10 VDC
+33 dBm maximum
IF Out
条件：Connector Type-N (f), 50 Ω (nominal)
Connector Type-N (f), 50 Ω (nominal)
Frequency range
1 MHz to 26.5 GHz
Amplitude ± 10 VDC
+33 dBm maximum
LO1 and LO2 Out
Frequency range
1 MHz to 26.5 GHz
USB control
条件：Connector Type-N (f), 50 Ω (nominal)
Connector USB
2.0 (Type A)
4.8GHz Out (not used with F49 options)
M1749B mmWave Transceiver (Optional)
M9808A PXIe vector network analyzer (optional)
S9110E integrates M9808A PXIe vector network analyzer (VNA) via option NA1 or NA2, in order to add
2-
port network analysis capability. For more detailed specification of the VNA portion, refer to M980xA data
sheet for reference
Note that in the S9110E system, the cable loss between the front panel and the M9808A VNA module may
cause performance degradation of the VNA
Although the M1749B mmWave Transceiver is operational from 22.7 to 49.2 GHz, the performance information for the S9110E is only provided for the
frequency bands called out in this Data Sheet
条件：Connector 2.4 mm (f), 50 Ω (nominal)
RF Tx/Rx 1 and RF Tx/Rx
2
These ports can be configured either to supply a mmWave signal to a Device Under Test
(DUT) or to receive a mmWave signal from a DUT
Amplitude 10 VDC
+10 dBm maximum input
LO In
Connector
3.5 mm (f)
9.6 GHz In
Connector
3.5 mm (f)
9.6 GHz Out
Connector
3.5 mm (f)
连接器 USB micro-B (f)
Trig 1/Trig
2
连接器 SMB (m)
Control (not used with S9110E)
Connector
19 V DC power supply input
Keysight enables innovators to push the boundaries of engineering by quickly solving
design, emulation, and test challenges to create the best product experiences. Start your
This information is subject to change without notice. © Keysight Technologies, 202
4 - 2025
Published in USA, Ju ly 24, 202 5, 3124-
1735.EN
相关资料
条件：For more detailed product and specification information refer to the following literature and web pages:
Keysight M9019A PXIe 18 slot Chassis, Data Sheet (literature no.
5992–1481EN)
Keysight M9038A PXIe High Performance Embedded Controller, Data Sheet (literature no.
3122–1717.EN)
Keysight M9300A PXIe Frequency Reference, Data Sheet (literature no.
5991-0898EN)
Keysight M9410A and M9411A PXIe VXT Vector Transceivers, Data Sheet (literature no.
5992–3331EN)
Keysight M980xA Series PXIe Vector Network Analyzer, Data Sheet (literature no.
5992-3596EN)
Keysight M9471A PXIe Vector Transceiver, Data Sheet (literatur
以上指标摘自厂家官方数据手册，完整定义、测试条件与保证值口径以手册为准。完整指标、测试条件与定义口径请见产品页「软件和手册 | 白皮书」栏目中的官方数据手册。
是德科技 | KEYSIGHT · onetest 仪器资源库
全部
是德科技官方渠道
官方渠道（官网 / 热线 / 邮箱）
• 销售服务热线
800-810-0189（座机）／400-810-0189（手机） 工作时间 周一至周五 8:30-17:30
• 热线传真
800-820-2816（座机）／400-820-3863（手机）
• 亚洲区支持邮箱 tm_asia@keysight.com
• 服务与支持邮箱
instruments_services@keysight.com
• 官网
www.keysight.com（中国站 www.keysight.com.cn）
全国办事处
• 北京总部
是德科技（中国）有限公司 北京市朝阳区望京北路3号
电话：(010) 64397888
传真：(010) 64390278
邮编：100102
• 上海分公司
上海市虹口区四川北路1350号中信泰富申虹广场5楼、16-19楼
电话：(021) 36127688
传真：(021) 36127188
邮编：200080
• 广州分公司
广州市天河北路233号中信广场66层07-08室
电话：(020) 38113988
传真：(020) 86695074
邮编：510613
• 深圳分公司
深圳市福田中心区福华一路六号免税商务大厦3楼
电话：(0755) 83079588
传真：(0755) 82763181
邮编：518048
• 成都分公司
成都高新区南部园区天府四街116号
电话：(028) 83108888
传真：(028) 85330830
邮编：610041
• 西安分公司
西安市碑林区南关正街88号长安国际大厦D座5/F
电话：(029) 88867770
传真：(029) 88861330
邮编：710068
• 中国香港
是德科技香港有限公司 中国香港北角电气道169号25楼
电话：(852) 31977777
传真：(852) 25069292 香港热线 800-938-693
• 维修 / 校准服务中心
中国大陆 北京 / 成都 / 苏州 服务热线 800-810-0189 / 400-810-0189
授权分销商
• 上海信果电子科技有限公司（上海）
上海市沪闵路8075号虹梅商务大厦6楼609室
邮编：200233
电话：021-64518399
传真：021-54560890
邮箱：jason.wu@signalgroup.com.tw
• 上海精测电子有限公司（上海）
上海市北京东路668号西楼15E
邮编：200001
电话：13916371522
传真：021-53086102
邮箱：yangzhen@jingce.com
• 北京东方中科集成科技股份有限公司（北京）
北京市海淀区复兴路69号院12号楼2层、7层 邮政编码：100039
邮编：100039
电话：400-650-5566
传真：010-68728001
邮箱：zhangzp@oimec.com.cn
官网：www.dfzk.com/br_keysight.html
• 北京千聚科技发展有限公司（北京）
北京市海淀区西三旗花园雪梨澳乡A区23-4号
邮编：100085
电话：010-82907162
邮箱：zhuqihui@qianjukeji.com.cn
• 北京金龙翌阳科技发展有限公司（北京）
北京市海淀区大柳树路17号富海大厦2001室
邮编：100086
电话：010-62167379/6213538
邮箱：zhy@yy17.com
官网：www.yy17.com
• 厦门同昌源电子有限公司（厦门）
厦门市湖里区悦华路215号综合楼二楼C单元
邮编：361000
电话：0592-5663715
传真：0592-2236795
邮箱：tcydz@xmtcy.com
• 合肥新普仪测科技有限公司（合肥）
安徽省合肥市长江路53号长江大厦1102室
邮编：230001
电话：+86(0551)65177518 ext:
传真：+86(0551)6260 7155
邮箱：hfsimple@mail.hf.ah.cn
• 品展国际贸易(上海)有限公司（上海）
上海外高桥保税区泰谷路18号1号楼1105A室
邮编：200003
电话：+86(0512) 6808 6023
传真：+86(0512) 6808 6025
邮箱：melody@chtek.com.tw
官网：chtek.com.tw
• 广州康祺科技发展有限公司（广州）
广州市天河区华强路1号珠控国际中心8层06单元
邮编：510623
电话：020-38295200
传真：020-38295122
邮箱：baobao@kontchi.com
• 广州科欣仪器有限公司（广州）
广州市黄埔区黄埔大道933号209室
邮编：510700
电话：86-20-38699788
传真：86-20-34395932
邮箱：cs@gzkexin.com.cn
• 成都安诚迅飞电子科技有限公司（成都）
成都市武侯区人民南路四段27号1栋1单元 24层3号
邮编：610041
电话：028-86027579
邮箱：jincai.he@ancentest.com
• 新亚制程（浙江）股份有限公司（深圳）
深圳市福田区中康路卓越城梅林中心广场（北区）一期1栋3楼
邮编：518035
电话：0755-23818536
传真：0755-23818625
邮箱：wangrongbin@sunyes.cn
• 无锡市邦达测量科技有限公司（无锡）
江苏省无锡市新区长江北路112号
邮编：214028
电话：0510-85258521 ext:
邮箱：bdyiqi@bdyiqi.com
• 武汉力德仪测科技有限公司（武汉）
武汉市光谷大道54号国际企业中心四期A座501室
邮编：430074
电话：027-85481090 ext:
邮箱：liuyang@leader-e.com
• 苏州工业园区贝奇仪器有限公司（苏州）
苏州工业园区通园路398号海逸大厦A402室
邮编：215006
电话：0512-62883832
邮箱：szbeiqi@szbeiqi.net
• 青岛鲁芯仪器有限公司（青岛）
青岛市福州北路135号鼎都1号写字楼328室
邮编：266007
电话：15953279543
传真：0532-80669058-830
邮箱：gaochangyuan@qdluxin.com
• Avnet Electronics Marketing（Phoenix）
2211 South 47th Street
邮编：85034
电话：+65 6289 9164
邮箱：Josephine.Cheong@avnet.com
官网：OnlineSupportAsia@Avnet.com
• RFMW, Ltd.（San Jose）
188 Martinvale Lane
邮编：95119
电话：#09-129
邮箱：sales@rfmw.asia
官网：www.rfmw.com
• 沈阳实拓科技有限公司（沈阳）
沈阳市和平区三好街35号8层
邮编：110004
电话：024-23843636
传真：024-23905232
邮箱：lf@shituokeji.cn
• 領先科儀有限公司（香港）
新界荃灣海盛路3號TML廣場21樓B5室
邮编：.
电话：852-31523600
传真：852-31523608
邮箱：allenma@advanceinst.com
租赁合作伙伴
• 深圳君鉴科技股份有限公司（深圳市）
光明街道观光路华强创意产业园3栋B座12楼光明新区
邮编：518107
电话：400-860-3035
邮箱：shichang@chrent.com
• 益莱储（北京）检测设备租赁有限公司（北京市）
来广营高科技产业园区4号楼3层301朝阳区
邮编：100102
电话：400-819-2800
邮箱：jim.chen@electrorent.com
• 北京东方中科集成科技股份有限公司科技租赁事业部（北京市）
北京市海淀区阜成路67号银都大厦12层
邮编：100142
电话：400-650-5566
传真：010-68728001
邮箱：wangml@oimec.com.cn
• 客而禧设备租赁（上海）有限公司（Shanghai）
徐汇区古美路1515号19号楼903室
邮编：201102
电话：021-54453166
邮箱：krc@krcchina.com
• 深圳市瑞普高电子有限公司（深圳市）
天安云谷产业园一期3栋D座1505-1506龙岗区
邮编：518129
电话：0755-29050100
邮箱：rickluo@ruipugao.com
• 苏州锦凡精密仪器科技有限公司（苏州）
苏州市高新区滨河路625号创业大厦5幢505
邮编：215011
电话：18914031336
邮箱：18914031336@jfsz.net
解决方案合作伙伴
• Tokyo Weld Co., Ltd.（Ota-ku）
2-28-1 Kitamagome
邮编：143-0021
电话：81-3-3775-4331
传真：81-3-3775-4359
邮箱：d-imai@tokyoweld.com
• 上海恒榉电子科技有限公司（Shanghai）
上海市奉贤区南桥镇西闸公路1036号3栋2层
邮编：201401
电话：18112779808
邮箱：salesvalue@everise-hj.com
• 佳燁科技股份有限公司(Ghiatek)（桃園市龜山區）
光明街243巷2號
邮编：33372
电话：+886-3-350-9960
传真：+886-3-320-3475
邮箱：support@ghiatek.com
• 华美博科技（北京）有限公司（北京市）
蓝靛厂东路2号金源时代商务中心C座9A2海淀区
邮编：100097
电话：010-88598732
邮箱：sino@sino-microtech.com
• 和创联合科技（北京）有限公司（北京市）
中关村东路18号财智国际大厦A座1612海淀区
邮编：100083
电话：400 650 7802
邮箱：info@hisuntest.com
• 昆山捷得立电子有限公司（昆山市）
登云路288号海创大厦C座25楼
邮编：215316
电话：0512-36831748
邮箱：sales@jiedeli-china.com
• 深圳市捷泰普科技有限公司（深圳市）
宝安区西乡街道前进二路桃源居南面深圳市智汇创新中心A座216室
邮编：518126
电话：0755-83908488
邮箱：sales@jtptech.cn
• 深圳市易捷测试技术有限公司（深圳市）
福虹路9号世贸广场C座1203室福田区
邮编：518033
电话：0755-83698930
邮箱：dongni.zhang@gbit.net.cn
官网：gbit.net.cn
• 深圳市泰仕捷科技有限公司（深圳市）
松岗大道7号汉海达大厦616室宝安区
邮编：518105
电话：0755-27128586
邮箱：riky.gua@tesijet.com
• 深圳市蓉声科技有限公司（深圳市）
福中路海连大厦连天阁 1103 室福田区
邮编：518033
电话：13828880571
邮箱：jiang.qian@radiation-test.com
• 苏州伊欧陆系统集成有限公司（苏州）
星湖街218号生物纳米园A7楼305室苏州工业园区
邮编：215000
电话：4008808776
邮箱：info@eoulu.com
• EM Labs Inc.（Kobe）
1-4-13 Mizukasadori, Nagata
邮编：653-0842
电话：+81-50-5370-0262
邮箱：info@emlabs.jp
• MPI Corporation（Chupei）
No. 155 Chungho Street
邮编：302
电话：+886-3-555-1771
传真：+886-3-551-8381
邮箱：info@mpi-corporation.com
官网：www.mpi-corporation.com/ast
• NOFFZ（Tönisvorst）
Vorster Strasse 238
邮编：47918
电话：+49 2151-99878-0
邮箱：info@noffz.com
• Power Technology Solutions（Santa Clara）
3048 Scott Blvd
邮编：95054
电话：650-308-8091 ext:
传真：408-727-0827
邮箱：inquiries@pwrts.com
• Resillion（Hasselt）
Kempische Steenweg 303
邮编：3500
电话：+32 498 92 01 71
邮箱：global-ci-sales@resillion.com
• Suzhou Link Ways Tech Co., Ltd.（Suzhou）
16F, Block B, Jin Shi Wang Hu Building, No. 18, Jia Rui alley, SIP
邮编：215021
电话：+86 512 6602 8998
• 上海凌测电子科技有限公司（上海）
峨山路91弄120号陆家嘴软件园8号楼401A室浦东新区
邮编：200127
电话：021-61090608
邮箱：yue.lin@merlintest.com.cn
• 上海北汇信息科技有限公司（上海市）
秀路100号虹桥总部1号4号楼3C闵行区紫
邮编：201103
电话：021-34716271
邮箱：info@polelink.com
官网：polelink.com
• 上海怿星电子科技有限公司（上海市）
钦州北路1199号智汇园87号楼5F室徐汇区
邮编：200233
电话：021-64955659
邮箱：biz@e-planet.cn
• 东昇电磁兼容技术(深圳)有限公司（深圳市）
福田中心区26-3路中国凤凰大厦2栋25G
邮编：518026
电话：0755-82792411
邮箱：sales@jstoyo.cn
• 南京派格测控科技有限公司（南京市）
建邺区建邺人才服务大厦16楼
邮编：210019
电话：4008920858
邮箱：sales@pgtec.cn
官网：pgtec.cn
• 南京纳特通信电子有限公司（南京市）
江宁开发区临淮街20号
邮编：210012
电话：025-84471796
邮箱：sales@rflight.cn
• 深圳市研辰科技有限公司（深圳市）
益田路3008号皇都广场C座2815室福田区
邮编：518048
电话：0755-82828703
邮箱：roger_huang@ascentest.com
原厂翻新与二手仪器
• 是德科技原厂二手仪器商城（Keysight Certified Pre-Owned）：www.keysight.com/used/cn/zh/
• 原厂翻新仪器经与新品相同的最终测试与校准，原厂保修最长 5 年；享 40%–90% 折扣，另有线上 5% / 教育 15% 优惠
0条提问
X
提问
X
回答
暂无视频
0条口碑
X
发表口碑
粤公网安备44030902003758